The computer freezes after turning on how to fix. A few tips on what to do to keep your computer from freezing

We are all very annoyed when the computer starts to boot for a long time and subsequently freezes. This not only creates discomfort at work, but also takes a considerable amount of time. Today in our article we will talk with you about what to do if the computer freezes. We will give only those tips that really work.

11 tips for what to do if your computer keeps freezing

1. Reboot your computer. Believe me, the easiest and fastest way to solve the freeze problem is to restart the operating system. Yes, you will not completely solve the problem, but you will get rid of the symptom. After all, sometimes the reason for the hang is a random error, so after a normal reboot everything will go like clockwork. You can restart the PC either with a button on the screen or with a button on the system unit. Before doing this, make sure that you will not lose any important data. For example, if you worked with a text document, and the computer froze, and you did not manage to save it, then you will have to wait until everything is working out and in no case do "Restart".


2. Disable all unnecessary programs for now. For many, we have observed such a harmful (for a computer) habit: launch more than a dozen programs and windows, and then resent the slow operation of the system, repeating the question: “Why is it frozen ?!”. Make it a rule not to run programs more than it takes in the next 5 minutes. And turn off running utilities that you do not need or have already stood idle for more than 10 minutes. In this simple way, you can reduce the load on the system. We recommend disabling programs through the "Task Manager", since in it you will probably find those programs that you did not start manually. Disable the unnecessary list of programs in startup (you can find it all in the same "Task Manager").


3. Check your computer for viruses. In 70% of cases, regular freezes and illogical computer behavior signal to the user that a virus has started in the system. Malicious software can heavily load all components of a computer (processor, RAM, hard drive, etc.). In this case, you urgently need to conduct a deep scan with an anti-virus program or even several. We have already described a more complete guide to your actions in the article "", where you will find all the answers to questions related to viruses. If you are lost in choosing a good antivirus program, then this article will come in handy: "?".


4. Clean dust from the computer (it may overheat). Earlier you could read about that, and in a nutshell, you need to turn off the power of the system unit and thoroughly vacuum your computer, only you need to do this very, very carefully so as not to damage important parts, such as the motherboard. You need to clean your computer because a layer of dust covering the processor, video card, hard drive or motherboard can significantly affect the speed of all processes. Slowed-down processes, in turn, can poorly cope with the tasks set, which subsequently will lead to such a symptom as freezing. Cleaning should be done at least 1-2 times every 6 months.


5. There is a problem with a device in the computer. Naturally, we are now talking about the system unit, since other components (, or) cannot be the reason that the PC hangs. The hang can be caused by a broken motherboard, hard drive and even a microcrack in the RAM. However, in this case, in addition to freezing, there will be sharp interruptions in the work of the PC (automatic restart). It is quite difficult to independently determine this cause, since you need special equipment that can make its own verdict: is there a malfunction in the device or not. Therefore, here we recommend contacting the service center for qualified assistance.


6. Defragment your disk. Nowadays, we are constantly engaged in both writing new files and deleting them, as a result of such numerous actions, files can be split between all sectors of the disk, which creates fragmentation, which significantly slows down the entire system, and especially programs. To prevent this, firstly, try not to leave a small amount of space on the hard disk partitions. Secondly, regularly defragment (you can find this function either in the Start menu - All Programs - Accessories - System Tools in Windows 7 or XP, or when typing in the search in the operating system).







7. Computer components are no longer suitable for modern day-to-day tasks. No matter how you want, your computer will eventually become far from the most powerful and new, and most importantly, this moment may come unexpectedly. For example, if you bought your computer back in 2010 and at that time it was one of the best, now it is a rather mediocre model that has a lot of shortcomings and does not always cope with the tasks set. Thus, if you are tortured by constant freezes, then you should think about replacing your PC with a more powerful model, and we already wrote about that in earlier articles.


8. Endure, endure and endure again! If you do not have enough money for a new computer, or its repair / upgrade, or you do not know the true reason for the freezes, then you have nothing to do but endure. This fate awaits those whose computers have already passed the age of 5-7 years. Whatever actions you do, but you will not get rid of the problem that leads to the slow operation of the PC. Be consistent, try not to run more than 1-2 programs at the same time and do not click quickly on the screen, otherwise you can click too much. Look for and install only software that will not take up unnecessary resources.


9. Incompatibility of programs. Sometimes the reason for the freezes should be looked for in certain programs, so try to notice the dependency: with which program is turned on, the computer freezes and stops performing any actions. This can happen when an error occurred in the utility during installation or it was not originally created for this version of the operating system. Incompatibility can still arise due to the use of illegal software, which was made, roughly speaking, "self-made", or a license key was not installed on it, since the introduction of someone else's code into the program can contribute to its incorrect operation, for which no one can be responsible other than you.


10. Clean up debris from the system. If earlier we advised you to clean the system unit itself (from dust), then at this point we recommend that you carry out a system cleaning of the Windows OS from unnecessary programs, files, documents, cache and the like "garbage". This point was revealed in detail in the article "", where we also mentioned cleaning the entire system. The essence of the paragraph and article is to rid the C drive (where the operating system is installed) from unnecessary files that may be located in the temporary folder (Temp), browser cache, and also in the registry.


11. Reinstall your computer. And the last, the most radical advice, which helps even on very weak machines, is to reinstall the operating system, while removing the previous one. This is a rather troublesome and time-consuming process. However, believe me, this is much better than the option in which you will simply endure constant howling. Reinstallation helps in cases where you cannot remove or even find a virus in the system. If the OS is cluttered with unnecessary programs, and you are too lazy to remove or defragment them, then reinstalling the system will make your task easier. You can find full instructions on how to install the system in the article: "?".

That's all! Now you will be able to save your computer from freezes on your own, and it is up to you to decide which of the methods to choose. Good luck!

You will need

• - a computer with a preinstalled Windows OS system;
• - system utilities;
• - antivirus software package.

Instructions

If your computer often freezes, pay attention to its temperature and the health of the cooling system. If the computer cooler works with, the computer's automatic protection is triggered, drastically reducing the frequency of the processor, which is suffering from overheating. After a while, the computer is in emergency mode. Examine the fan. If it is working properly, then clean the system of dust with compressed air. Install an additional cooler if necessary.

If your computer freezes frequently, check the stability of the memory modules. Due to defects in these modules, information processing slows down. There is also the possibility of memory overheating. Disassemble the computer, check the temperature regime by simply touching the modular compartment. If the temperature is high, you will have to install additional air vents. Inquire about the type and manufacturer of the installed memory. You may need to buy a different, faster module.

Listen to the hard drive. If there is extraneous noise or clicks, then the hard drive is faulty. In this case, the computer freezes are explained by the dead, access to which is impossible. As a result, when formatting the disk with NTFS, there will be a low speed of access to the boot area at the start of work, periodic launch of scanning service utilities, and other problems. With FAT formatting, there will simply be a "blue screen of death".

If there are no problems in the operation of the hard disk, memory and cooling system, pay attention to the BIOS, the incorrect configuration of which may cause unstable operation of the computer. The manufacturer usually runs a BIOS that may not be optimal for a particular computer. Reconfigure it based on the machine data to ensure that your computer performs as efficiently as possible in all modes.

Related Videos

Not everyone thinks about the temperature of their hard drive in a timely manner. It is better to think about it early, and not when it will be too late, and you will see "SMART ERROR" when loading. You need to know what the optimal temperature for hard disk is the temperature up to 45 ° C. If the temperature rises above 50 ° C, then this will significantly reduce its service life. Currently, there are many programs and ways to learn temperature your hard drive. One such program is the Everest program.

You will need

• Computer, hard disk, Everest software, Everest software disk, or Internet access

Instructions

To find out temperature hard drive, get a disk with this program or, much easier, download it from the Internet. Be careful, as after downloading this program, you will not be able to watch temperature hard disk, since this and some other functions are not available in it.

Run the installation file and in the window that appears, click "Start installation". Select the language you are interested in and click OK. Click "Next" to continue. For further installation, you need to accept the terms of the license agreement and click "Next". In the window that appears, you must select the directory where the program will be produced. To do this, click the "Browse" button and select the required folder. By default, to the Program files folder on the system drive. Typically, this program does not require a lot of hard disk space (less than 20 MB).

After selecting the required installation folder, click "Next". The next window will ask you to create a shortcut in the Start menu. If necessary, check the box and click "Next". After that, you will be prompted to create a shortcut shortcut and a shortcut on the desktop. If necessary, check the boxes and click "Next". To start the installation in the next window, click "Install". After installing the program, a window will appear with

There are many problems with computing, but some of them are more relevant than others. One of these is the situation when the computer freezes. What to do in a similar situation, how you can solve this problem so that it does not occur in the future - all methods and ways to eliminate freezes will be described in this article, and they have been tested in practice many times and give really real answers to these questions.

The freezing problem can be either single or cyclical (from time to time the computer freezes). If your mouse does not move for a long time and no buttons on the keyboard work, in this case it is enough to restart the computer using the reset button on the system unit (in the case of a laptop, you need to hold the power button for 3-4 seconds and turn it on again). If the problem persists, the immediate cause needs to be identified.

If the user often installs various applications, games, etc., while uninstalling them using the standard Add or Remove Programs tool, you must carefully analyze the registry and clean it of unnecessary entries. It is the oversaturation of the registry that can serve as frequent freezes and inhibitions. To do this, you can use the free Ccleaner program. After installing and running this application, go to the registry tab, click on the "Search for problems" button, and then, after analysis, click on "Fix".

This simple procedure can solve not only the freezing problem, but also increase system performance.

Overheat

This reason is the most common and can be caused by insufficient power of the coolers, or an abundant layer of dust on the components, which appears during prolonged use of equipment without proper cleaning and replacement of thermal paste. In order to know for sure that this is exactly the problem, it is enough to download and install the AIDA64 program. After starting this application, go to the sensors tab and see if certain components do not exceed the maximum temperature threshold.

If so, clean the system unit yourself, or contact one of the service centers.

Checking the hard drive

The reason for the freeze may be a problem associated with bad sectors on the hard drive. To troubleshoot such problems, you can use CrystalDiskInfo.

If, after the test, the user displays an alarm on the screen, then the reason is in the hard drive. Try to perform a proper formatting with the deletion of all partitions, having previously saved all important data to another medium. There are also special utilities that help isolate bad sectors, however, as experience shows, this procedure will not be able to completely solve this problem. From now on, you need to think about purchasing a new hard drive.

But even if CrystalDiskInfo shows that everything is in order with the hard drive, it would not hurt to defragment the disk. This can be done with the standard Windows tool located along the path Start - All Programs - Administrative Tools - Optimize Drives. After launching this tool, you need to perform the analysis, and then click on the "Defragmentation" button.

Also, for these purposes, there is a special Defraggler application, which in fact resembles a standard tool, but with greater functionality.

Cleaning up startup

A certain amount of resources is allocated to launch any of the programs. At the same time, even if they are idle, a certain amount of memory, etc., is used just for them. If a user has a lot of applications in autorun, the computer will take a long time to boot, and subsequently the entire system will slow down. In order to fix this problem, the aforementioned Ccleaner application can be used. Click on the "Service" tab and select "Startup". In the displayed list of programs, place the cursor on the one that you want to remove from autorun and click on the "Turn off" button.

Only those programs that the user does not often use should be removed. For example, if you do not use Skype so often, it is better to remove it from here. After a second reboot, the situation should change for the better.

RAM

With the modern requirements of the OS and other applications for RAM, it has increased. For normal operation, you must have at least 4Gb, and better 8Gb RAM. But if the user has 2Gb and there is no way to install an additional bar or buy a new one, you can try to optimize the RAM. For this:

• right-click on "My Computer" and select "Properties";

• click on the link "Advanced system parameters";

• go to the "Advanced" tab and click on "Options";

• then you must also open the "Advanced" tab and click on the "Change" button;

• set the paging file threshold that is recommended by the operating system.

Cleaning the physical disk from unnecessary files and directories

If your computer is clogged with unnecessary files and directories, it also affects the performance of your computer. For quick cleaning, you can use the standard OS utility. Click on Disk C: RMB and select the "Properties" line, and then click "Disk Cleanup".

After the analysis, click on the "Clear system files" button and the re-analysis will start.

Check the boxes on all the items and click "OK", then confirm the operation.

Do not forget that if the C: drive does not have more than 5% free space, some files and directories located on the desktop, in documents, downloads, etc. need to be copied to another section, or deleted.

Checking for viruses in the system

Viruses always make unpleasant adjustments to the operation of the system, up to a complete freeze of the computer. Download Dr.Web CureIt and check your system for malware.

Disable visual effects

To speed up the OS, if the technique is already outdated, you can turn off visual effects. For this:

• right-click on "My Computer", select the line "Properties", then "Additional system parameters", and then in the "Advanced" tab click the "Options" button;

• in the window that appears, uncheck unnecessary effects and click "OK".

Swollen capacitors - the cause of freezes and inability to turn on

If the computer has been used for more than one year, a problem may arise with capacitors, which, after a certain time, may swell and do not hold the required capacity. Moreover, in this case, the system may not only freeze, but subsequently and not start at all. To understand if this is the problem, remove the cover on the system unit and visually inspect the capacitors on the motherboard. You also need to view them in the power supply, where they are also located. If the surface has become convex, it is best to take the computer to a service center, where they can be re-soldered in a short time.

Reinstall Windows

After prolonged use of the OS, a bunch of errors, a lot of unnecessary files, etc. appear in it. Therefore, it is always recommended to reinstall the system at intervals of one and a half years.

In contact with

Very often, users are faced with a problem when, for some unknown reason, the entire system begins to freeze, periodically glitch, or even boot with errors altogether. However, even the most advanced users, not to mention beginners, can not always find the reason for this behavior.

In this article, we will try to diagnose the main causes and find ways to eliminate them.

Unstable work of the hard drive

If, when the built-in or external hard drive is connected, the computer starts to freeze, then this may indicate problems in the operation of the hard drive or further signs of its failure.

Depending on the type of malfunction (software, mechanical), this can be:

• Crashes on loading.
• The emergence of a "blue screen".
• A large number of bad sectors.
• Low speed of reading / writing information.
• The appearance of errors during work.
• Frequent freezing of the entire system.

Windows standard tools

The reason that the hard drive clicks and freezes during operation can be common system errors and unstable sectors. Checking and fixing them is quite simple, for this we will use the usual "Explorer".

When performing a check on the system partition (on which Windows is installed), a message will appear stating that the check will be performed at the next boot, we agree.

After that, its performance must be restored.

Third Party Programs

There is another most effective way to diagnose a hard drive using free programs or. They are distinguished by great functionality and are used as the main tool for getting rid of bad sectors by professional craftsmen.

If, in addition to the fact that the hard drive often freezes, it works slowly, there are other problems: constant errors of programs, drivers, malfunctions of the Windows operating system. It is necessary to check it as soon as possible, since there is a possibility that at any moment it can fail and all the information stored on it will be lost forever.

Overheat

If your computer freezes due to the hard drive, then it may be due to it. Modern hard drives generate a lot of heat during active operation and can get very hot. That is why cooling elements are necessary for their normal use. Sometimes gaming PCs have complete cooling systems using water or refrigerants.

If the operating temperature of the drive is exceeded, the system starts to slow down and works extremely slowly and intermittently, as a result of which the laptop or computer may freeze. Modern motherboards have temperature tracking technology, information about which can be found in or using the additional utility AIDA64.

This requires:

The normal operating temperature of the hard disk is 30-45 degrees. If the available indicators significantly exceed this number, then it is urgent to find the cause and take concrete action.

There may be several of them:

1. Lots of dust and dirt.
2. Failure of the cooling system. This is especially important if you have a closed case and when the cooling system is not working, the heat generated by the components will only accumulate, as a result of which they can simply burn out.

First, you should thoroughly clean the device from clogging by removing all dust and dirt. If this does not help, then you need to check. If it does not work at all or periodically squeaks, buzzes and emits other uncharacteristic sounds, then it should be lubricated, and if necessary, at all, since it could fail with prolonged use.

It is much more difficult to do all this with a laptop, since this device must be disassembled, showing special care and carefully following special instructions.

Controller and hard drive compatibility

A newly purchased modern hard drive hangs and slows down when connected, and also does not want to work faster than outdated drives. However, the performance test report that was performed shows that both devices produce the same results. This could be because your motherboard does not support the new interface. In this case, you will have to abandon the new drive or you will need to replace the motherboard with a newer model.

The next reason is the cable used, it may also be outdated and simply not suitable for the new HDD. In addition, old wires fail with prolonged use, especially at high temperatures inside the case.

Contacts and loop

Oxidation of contacts

If, when copying one or another information to any of the hard disk partitions, it freezes, then the reason may be oxidized contacts. Due to the formed oxide layer at the point of contact, the current flow is disrupted and, as a result, the entire system hangs up.

Getting rid of the oxide is easy enough with a regular hard eraser.

Plume

A damaged or loosely connected cable can be the culprit for various problems with the hard drive. Therefore, this point should be carefully checked and, if necessary, replace the cable.

Physical malfunction or lack of power

As a rule, with any physical malfunction of the internal mechanism of the hard disk, it appears, it can begin to creak, knock or squeak. This is especially often manifested as a result of various physical injuries: falling, impact, severe overheating. All this can indicate both an imminent failure of it, and a lack of nutrition (if there was no physical damage).

In the first case, the only correct solution would be to take it to a service center. Since its efficiency can be restored only under special sterile conditions and with certain skills.

If there is a lack of power, it is enough to disconnect unused devices from the computer or laptop and re-check the HDD. You can also connect it to any other device. If the problem is resolved, then the "culprit" has been found - a weak power supply unit. In this case, only replacing it with a more powerful one will help.

Disk fragmentation

Another reason why the computer takes a long time to boot and hang may be due to the fragmentation of the hard drive. Due to the constant addition and removal of files, their contents are divided between several sectors in different areas of the hard disk. This process is called fragmentation.

At this moment, the drive head is constantly moving in search of scattered fragments of this or that file, and since the parts of the file are located in different areas, it takes a lot of time.

At that time, defragmentation will organize the files, thereby shortening the access time to them.

To defragment the hard drive, you can use any third-party program, of which there are many on the network, or standard operating system tools.

This requires:

Now you know what to do if the hard drive on your computer freezes or slows down, thereby preventing the operating system from working normally, and you can fix the existing problems yourself.

A few more effective ways are disassembled in this video.

Does the computer freeze up tightly, take a long time to open applications, during games the computer is terribly slow? Many people are faced with this, this is understandable, a computer is a rather complex system in which a huge number of nuances affect performance. So why might the computer freeze? We will look at the main reasons that most affect the performance of your computer.

It is known that a computer master will come to your home in Moscow anywhere and very quickly. But we advise you to take your time. After reading this article, you will understand why the PC freezes most often. Having remembered these main reasons, you will not have the question: “the computer freezes, what should I do?”, And you will be able to fix the situation on your own in most cases.

Trojans and viruses are one of the reasons the computer freezes

Spyware, popularly referred to as viruses, pose a great threat to the security of the system, but in addition, they significantly reduce the performance of the system, and in especially severe cases, the computer generally freezes.

There are several ways to deal with this type of threat. The first and easiest step is to install various anti-virus and anti-spyware programs with the latest and most current databases on your computer. This will help prevent your computer from getting infected and avoid situations when your computer starts to freeze.

If you could not protect yourself, then you should try to open the "Task Manager" and look at the suspicious processes. These include primarily those that take up a fairly large amount of processor time and run constantly when no applications are running. Then you should clean the autorun from unnecessary and unknown programs.

And finally, if you find a process or file that is definitely a virus, you should clean the registry from all references to these files in it.

Computer freezes due to CPU overheating. What to do?

Every year world processor manufacturers release more and more powerful models. But with an increase in power, energy consumption also grows, which in turn entails an increase in heat generation. For the time being, the coolers do their job and cool down our processor, while we chop off the shoulder in the next game. However, this does not last long.

Dust, which is enough everywhere, gradually settles on the cooler over time and reduces its usefulness, the processor starts to warm up. Fortunately, the processor will not heat up endlessly, it most likely will not even burn out from overheating, but the computer may freeze.

Here's the thing: modern motherboards have CPU temperature control. At the moment when the temperature exceeds the permissible level, the system begins to slow down the processor in order to prevent it from overheating. If the temperature continues to rise, then the system stops supplying the load at all, and at this moment the PC hangs tightly.

To avoid such troubles, you must:

• periodically vacuum the inside of the computer from dust;
• check if the coolers are working;
• periodically change the thermally conductive paste between the processor and the cooling heatsink.

There are many different utilities to monitor the CPU temperature.

The computer may freeze due to memory problems

The operation of RAM can have a very large impact on the performance of your computer. The performance of RAM is affected by such indicators as: compatibility of RAM manufacturers in the presence of several strips, the speed of RAM, etc. Minor defects or overheating of the memory module is enough for the computer to freeze.

Previously, everything was much simpler, I found out what speed and volume the motherboard can support, and I bought such memory. Now there are a huge number of manufacturers, memory speeds and other characteristics, and the choice has become more difficult.

Before replacing or adding RAM, you need to study the characteristics of your motherboard. Find out what types it can work with and at what speeds. It should also be borne in mind that not every operating system can support large amounts of RAM. For example, 32-bit operating systems can only work with 3 gigabytes of RAM.

Computer freezes due to HDD instability

The hard drive stores all the files on our computer. The process of reading and writing is almost constant, which means that the speed of the hard disk will affect the overall performance of the system. An HDD, like any other component in a PC, wears out. Unreadable areas of the disk appear, areas with poorly readable clusters, and as a result, low speed of work - the computer freezes.

To eliminate freezes in this case, reinstalling windows will not help. In fact, you need to check the hard disk for bad sectors with a special utility. In this case, the damaged fragments will be marked as non-working and will not slow down the system.

Externally, you can identify problems with the hard drive by sound. Experienced users will notice this. If the state is very neglected, then in general, the failure of the hard disk is possible. Therefore, critical files should be stored on at least several hard drives at the same time.

Why does my computer freeze on incorrect BIOS settings?

One of the implicit causes of system instability is the BIOS. This is where the most important computer settings are made. Among users, it is believed that BIOS for professionals and the layman should not go there. This is partly true, but often, especially after changing some components, the BIOS presets are not optimal. Therefore, the computer often freezes.

You should be very careful when setting up your BIOS. First, you should study the information about your motherboard on the Internet, find out what settings and what are responsible for, what parameters may be more optimal. When, nevertheless, you start setting up the BIOS, you should not change everything at once. It is more correct to change only some parameters and see how this affects the system performance and whether the computer will freeze less.

In some cases, it is worth considering the possibility of changing the BIOS firmware, but this option requires some PC skills. However, this process must be carried out carefully. Turning off the power of the computer during the firmware can damage the motherboard and you will have to go to the service center.

Errors in the operation of various Windows services

Windows has a large number of different services enabled by default. For normal operation of the system, only a part of these services is enough, but they all take up processor time - the computer freezes. You need to find out which services on your system are not carrying the required payload. After that, having correctly configured the computer, turn them off.

In order to find out which services are running at the moment, you need to open the computer administration panel, expand the list of services. A more detailed description of the services can be found in the list that opens. In this list, you can read the service name, state, startup type. If you select a service, you can read more about it in the window that appears.

First of all, you should pay attention to those services for which the autostart type is "automatic". Many of these services are needed for specific purposes, such as remote registry editing. For ordinary users, this service is not useful at all.

You can stop the service or disable its autostart from the service properties window. You can also change other parameters of the service there. You can experiment with disabling services, services disable some properties of the system, but cannot lead to its inoperability. You can turn on the service again at any time.

PC freezes due to unresponsive processes

Processes that fall into their own internal cycle practically do not respond to the control of the system. They take up almost all the processor time and the computer freezes up tightly, so they can be quite easily identified. This often happens if the program was launched from the wrong place where it was installed or the software is outdated for this system.

There is one exception, this is the process of system inactivity. It usually takes 95-98% of the CPU time. Keep in mind, however, that if your system is running an application that requires a lot of CPU time, it will also take up almost all CPU cycles. If the process is executed correctly, then sooner or later it will complete its task and free the CPU. Hanging applications do not release the processor until you manually terminate their process.

You can see what processes are currently running in the system in the Task Manager. If necessary, through the context menu, you can complete most of them. If you have terminated a system process, without which the system cannot run any longer, the computer will simply reboot.

File fragmentation is another reason why your computer often freezes

Files are written to disk in blocks one after another. Then, after deletion, the gaps are freed up in which new files are written. If the file does not fit into one block, then it is divided into parts and recorded in the next interval. This continues all the time and sooner or later the files cease to fit into a whole block and are written only in fragments. And as a result, the computer freezes.

Often, by swapping the places of the fragments, you can assemble files into one block like a mosaic - this process is called fragmentation. The speed of reading and writing information to the disk depends on the number of fragments into which these files are divided. It often happens that a very small file that is constantly used by the system is split into several thousand parts.

To prevent this "ailment" of your computer, you should defragment your disks about once every few months. Particular attention should be paid to the one on which the system is installed. The defragmentation utility is opened from the disk properties window. It requires about 25% of free space on the disk that is being defragmented.

If you still have any questions, you can contact us for help - computer service site. The experts of our service will quickly and accurately determine the reason why the computer freezes and eliminate all malfunctions.