A common problem that brought you to this article is iPad freezing. Despite the fact that it may seem completely frivolous, some serious problems can go hand in hand with it, relating primarily to operating system tablet.

Hanging can occur due to many factors and its “treatment” will also depend on the individual case. Next, we will look at the most common of them and offer options for getting rid of this annoying failure.

Causes and solutions for freezes

Each of the cases of freezing the device is individual.

In general, there are several categories of problems:

• lack of response to keystrokes or interaction with the sensor;
• inability to get to the Home screen;
• ipad freezes and does not turn off in sleep mode;
• the gadget does not respond to attempts to turn it off;
• freezing when updating or resetting settings;
• the appearance of a white screen.

For these failures, the ways to get rid of them will also differ. Next, we will talk about this in more detail.

When updating

If the iPad freezes during the update process, then in order to restore its performance, you will need to uninstall the current version of the software and return the one that was installed before it.

For this we need:

Important! Be careful not to disconnect cables or power to your tablet during the update process. Even if the process completes successfully, the device may not have the files necessary for it to work correctly. In the future, this can lead to serious problems and the need to reinstall the OS.

When resetting settings

The cause of the freeze is most often the internal errors of the tablet. What to do if one of them appeared right during the update or firmware update of the device? The tablet freezes and does not respond?

There may be several problems in this case:

• software error;
• problem with the firmware file;
• update process failure.

Faced with one of them, it is worth understanding that they are quite serious and in the future can lead to errors in the operation of the device. The solution may be a flashing and re-updating.

Attention! To avoid such problems, it is recommended to use a known working firmware file and not interrupt the tablet update process. .

When enabled on an apple

Another common mistake is the device freezing on the apple - the startup screensaver.

The most likely reasons for this iPad behavior are:

• re-update;
• uninstall the apps causing the conflict;
• reinstall the OS using a verified firmware;
• remove contaminants or take the device in for repair.

It also happens that the work of the tablet is interrupted by the appearance of a white screen. The reasons for this phenomenon can be hidden in both software and hardware failures.

To get rid of this problem will help:

• turn off the iPad by holding the Home and Sleep buttons for about 10 seconds;
• the so-called "hard reset" - pressing the "Home" button located on the front side of the device and the "Power" button located on top.

Important! It is necessary to hold the buttons until the tablet is completely rebooted, until the splash screen with the image of an apple appears on the screen. During a forced restart, data is not deleted from the device.

Video: Treatment of iDevice from the "eternal apple"

How to restart ipad if it freezes

If you experience any problems with your iPad, it is often enough to simply restart. But when it freezes, it may not respond to the usual restart, touches and pressing other keys.

A forced reboot will help, which is quite simple to do:

If the problem persists, repeat this procedure, then contact the repair shop.

Note! The reboot time for each specific case can vary from 2 to 30 seconds. After that, the device will be ready for use again and the information on it will be completely saved. The process is the same for the iPad 2 and other Apple devices.

Separately, it is worth mentioning the freezing of the tablet in case of mechanical damage.

The most common of them are:

If after that there are problems with the operation of the iPad, then you should pay attention to a few points:

1. if moisture gets on the device, it must be removed immediately using a soft cloth, sponge or dry wipes;

Important! A hairdryer is also suitable for this, but it is very important not to use heating modes - this can lead to overheating and subsequent damage to the device. You can remove moisture from it only with cold air and very carefully.

1. try not to leave the iPad in the sun for a long time and only carry it in a bag, protecting it from bad weather;
2. timely clean the tablet from dust, on your own or by contacting a service center;
3. after a crash, if errors keep appearing again and again, we recommend that you seek help from professionals.

Attention! It is recommended to disassemble the tablet yourself only if you already have similar experience.

So, we have considered all the most common causes that can lead to a tablet freezing. In many of the above cases, the problem that has arisen can be easily solved at home, but when the failure is not software, but hardware, the best solution would be to contact a specialist.

One of the most annoying problems with the iPad 2 is freezing, especially when it happens often enough. When the iPad 2 freezes or freezes, it usually crashes from apps that conflict with each other or with an app that has corrupted memory. In rare cases, when the iPad freezes, there may be a conflict with the operating system, and in even rarer situations, the operating system may be damaged.

You do not know what to do if the iPad freezes? Don't worry, we'll fix it. A dangling gadget that for some reason does not turn off can be rehabilitated. By the way, iPods and other types of Apple devices can also freeze. Now let's talk about what to do in such difficult situations, and how to fix this problem.

To make the machine turn on or off again, take the following steps:

1 Reboot tablet two or another device with which there are problems.
Usually, simply restarting your iPad is enough to fix the problem. This is a great memory cleanup method used by the iPad for active software, and a great way to shut down work and apps that are causing trouble. Don't worry - all your information will remain in place. To reboot your device, simply tap on the Sleep/Wake button at the top of the device and the round Home button at the bottom.
After you have done all of the above, for a short period the machine will turn off automatically. When the display goes dark for one moment, turn it on by holding the Sleep/Wake button for a few seconds. When it boots up, the Apple symbol will pop up.
2 Get rid of the software - "pest".
Maybe some app is causing your iPad to freeze? If you have rebooted your device, but are still having difficulty launching the software, the best thing to do is to reinstall it.
Delete by clicking on the element and holding it until the X element appears in the right corner at the very top of the application window. When you click on the X element, the application will be deleted.
After removing it, you can easily re-install the software by visiting the app store. The app store has a dedicated tab that displays all of your previously downloaded products.

Attention! All data stored in the application will be erased when it is deleted. If you save important information in the program, do not forget to backup.

3 Restore iPad to original settings.
If you're still having problems with frequent freezes, it might be best to restore your device to its original settings and then restore your apps from a backup via iTunes sharing. This will cause the tablet to completely clear all available memory and storage and start updating.
You can factory reset by going into iTunes, selecting your iPad from the list of devices, and clicking the "Restore" button. The system will offer to backup your gadget, which you, of course, must agree to perform before restoring the device. This should remove any software or operating system malfunctions.

Now you know how to clean the iPad, and what to do when resetting all its settings. The most important thing is to take care of the backup in advance. The gadget cleaned in this way should restore its normal operation. If your tablet continues to lock up or freeze after restoring factory defaults, you can contact Apple Support or take your device to an Apple store.

How to revive an iPad stuck on "Hello" or "Slide to Upgrade"

Troubleshoot iPad issues during the setup, update, or activation process.
The iPad tends to be one of the most durable and quietest tablets on the market, but like a battle computer, it can have issues. And each of them, whether it's stuck on the activation screen or otherwise, is a big problem, especially if you recently upgraded to the latest version of the iOS operating system or reset the iPad to "factory settings". The good news is that in this situation you have the ability to fire up the iPad and work. Unfortunately, the bad news is that you may need to restore your iPad from the most recent backup.

First, try a hard reset. With it, the device will turn off automatically. After that, he will probably be able to return to his usual mode of operation.
What many users don't realize is that pressing the Sleep/Wake button on the top of the iPad doesn't actually turn off the device, which is an important first step in troubleshooting. If you are on the Hello screen or the Slide Upgrade screen, you may experience problems with a normal reboot. A hard reset is when you tell the iPad to turn off immediately without any confirmation:
1 First press the Sleep/Wake button and keep pressing the button.
2 If the prompt “Slide to Power Off” appears on the screen, release the Sleep/Wake button and follow the button instructions. This is a normal reboot.
3 If you don't see "Slide to Shutdown" after a few seconds, just keep holding the button down. After about half a minute, iPad will automatically turn off. This is a "hard" reboot. The only difference between a soft reset and a hard reset is that the system didn't require you to confirm turning off the device. Hard Restart is a safe mode that can be set in cases where the iPad fails to prompt for confirmation, such as freezing during the activation period or during an update.
4 After the iPad turns off, wait about ten seconds, and then press and hold the Wake.Suspend button and the iPad will turn on again. You can lift your finger when the Apple logo appears on the screen.
We hope that a simple reboot of the device in 90% of cases will eliminate the problem with your device freezing. If the problems still persist and iPad freezes after following all the above suggestions, you can try repeating these steps. But instead of turning on your iPad right away, you can plug it into your laptop or computer for an hour or two to charge it. This will most likely fix any problems and the device will be able to shut down safely.

What to do if: iPad is buggy, iPad slows down and iPad freezes? We have collected 11 tips on how to solve these problems!

If your iPad model is an older generation (for example, iPad 1, 2, 3, 4 or iPad mini 1, iPad mini 2), your tablet will slow down over time. The main factor why the iPad starts to slow down is the wear and tear of the internal drive on which the operating system is installed.

To make your device work like new, you need to change the internal memory card, but before that, try to solve the problem in the following ways.

If your iPad is slow, uninstall apps you no longer use. Apps take up storage space, and freeing it up makes iOS work easier. Delete any apps you no longer use.

You can remove apps you no longer use by long-pressing the app icon until it starts to jump. Then click on the "cross" in the right upper corner to remove it.

To uninstall multiple apps at once, go to Settings > General > iCloud Storage & Usage. Now click Manage Storage (under Storage, not iCloud) and look for items that are taking up a lot of space. Review the contents of the application, and then click Uninstall.

Also, instead of applications, you can delete unnecessary files, videos, photos, music, etc.

Reboot your iPad mini, Air, or Pro with the instructions below

After deleting unused apps or files, you must restart your iPad, which will refresh the tablet's memory.

To restart your iPad, press and hold the Sleep/Wake button until you see the power off slide, then turn off the device.

Then press and hold the Sleep/Wake button to turn it on.

If the iPad freezes, then do a hard reset:

Simultaneously hold the "Off / On" and "Home" buttons until the Apple logo appears.

Then turn on the device in the usual way.

Stop app updates in the background to stop your iPad from slowing down

Once you've freed up memory on your iPad, it should speed up. But if you're using an older generation iPad, such as the iPad mini or iPad 2, disable features you can do without to improve device performance.

First, stop app updates in the background. If you have many active applications (social networks), they will use the processing power from your iPad, even if you do not open the application.

Tap Settings > General > Background App Refresh and set Background App Refresh to Off.

You can make it so that some of your apps use background refresh while others don't. But we recommend that you disable all applications.

Don't update iOS (or your apps) if your iPad is slow

It may seem counterintuitive, but when a device starts to wear out, updating to the latest version of iOS may slow it down instead of speeding it up. This was observed in the original iPad on iOS 5.

All these new features require more resources, and when your device reaches a certain age, it does not always have enough power.

The same goes for apps – as apps get more powerful, they become harder to run on an older device.

Unfortunately, this item will not help those whose devices are already slow due to these updates. If you have already updated, continue to the next step, but next time, remember that updating may slow down your device.

Use standard Apple apps

Over time, some third-party apps don't get updated and slow down your device. So uninstall or update the old app.

If the device starts to slow down, it is best to use standard applications from Apple developers.

Clear Safari Cache

Your browser cache is another place where you can clear out some storage space, which can result in small speed improvements. Safari is the browser that most often causes slowdowns in the device. This may be caused by a full cache that is stored in Safari.

To clear all Safari caching information, go to Settings > General > Clear History and Website Data. This should speed up the Safari interface.

If you have additional tips to improve the performance of your browser, write them in the comments.

Clear cache of all apps

If clearing the cache in Safari did not help, then try clearing the cache of all iPad apps.

Clear the cache using the application:

How to clear iPhone memory from iOS

How to clear cache on iPhone or iPad?

How to clear memory on iPhone and iPad from junk

The easiest way to clear iPhone memory

Turn off notifications for iPad acceleration

Every time you get a notification about a new message on Facebook or about the restoration of vitality in your favorite game. As with background app refresh, scanning and providing notifications can slow down an iOS device.

To disable notifications, go to Settings > Notifications, and set each app to Disabled.

iPad glitches or iPad slows down or iPad freezes

Turn off Location Services (GPS) on iPad

While location-friendly for apps like Maps and Facebook, this feature reduces battery life and performance.

Tap Settings > Privacy > Location Services and select Location Services and then Disable.

Be careful, the Find My iPhone feature will not work.

Turn off Spotlight

Spotlight searches your iPad across all hard drives and user information. This search tool can slow you down.

Tap Settings > General > Spotlight Search and set all search result items to Off.

Enable motion reduction

Turning off some visual effects can provide a performance boost. Go to Settings > General > Accessibility > Reduce Motion and set Reduce Motion to On.

Also, check out the other tips in the articles below.

Once you've completed the backup, you're ready to wipe all content on your iPad and revert it back to "factory default".

The iOS operating system is able to work for years without complaints, but at some point, for no apparent reason, the device will freeze and need to be rebooted. It is also recommended to restart the iPhone and iPad, for example, if applications do not work properly. There may be other situations when you need to restart the device by resetting the current session.

iOS provides several ways to restart your device. You can do this in normal mode, in emergency mode (forced restart when frozen), and even on an iPhone or iPad that does not have mechanical keys. Within the framework of this article, all ways to reboot Apple smartphones and tablets will be considered.

How to restart iPhone or iPad

The iPhone and iPad have several mechanical keys, one of which is responsible for locking the device. For a normal reboot of the device, you need to hold it down for 5-7 seconds, after which it will be possible to turn off the smartphone or tablet on the screen by swiping from left to right over the corresponding area of ​​the screen. When this action is completed, the iPhone or iPad will start to turn off, which may take up to 30 seconds.

To complete the device reboot process, it must be enabled. To do this, again hold down the screen lock button and hold it until the Apple icon appears on the display - a bitten apple. At this point, you can release the button and wait for the device to boot up, which may take a couple of minutes.

How to Force Restart iPhone or iPad

In some situations, an emergency restart of your iPhone or iPad may be required. For example, it is necessary when the device's display does not respond to touch, and there is no way to swipe the screen to turn off the device. To force restart your iPhone or iPad, you need to do the following:

Important: Apple regularly releases firmware updates for its devices. According to the recommendations of software developers, it is necessary to perform a forced reboot of the device after each such update so that there are no malfunctions in the system.

How to reset iPhone or iPad without buttons

Apple devices have a long life cycle, and they fail only through the fault of the owner, who can drop a smartphone or tablet, resulting in a broken screen or cracked circuit board. Also, with careless operation, the Home button or the iPhone and iPad shutdown button may break. In this case, restarting the device according to the instructions described above will not work. But Apple has foreseen this moment by introducing a feature called Assistive Touch into its touch devices, which can be translated as “Assistive Touch”.

When working with some applications. This can happen when many applications are open at once (which puts a lot of stress on RAM). Especially if you quickly switch and fold them with your fingers.

In many cases, users do not have a clue about how to reset an iPad. It also happens that the switched off tablet does not turn on by holding the Power button as standard. We offer to consider the main methods of rebooting, as well as some alternative options when a system restore is required.

Standard iOS reboot

The standard way to restart the iPad comes in handy when the system failure is minor. To do this, just hold down the Power button and hold it for a few seconds. The screen will then darken, and a slider labeled "Close" will appear at the top. You just have to swipe your finger.

In some situations, holding down Power and going to such a window is enough for the iPad to "come to its senses". In this case, there is a "Close" button. Click it first. If the problem is solved, there is no need to turn off the tablet.

After turning off the iPad, wait until the RAM is cleared, the screen will completely turn off. If it gets hot from use, wait a bit. Then turn on the tablet while holding the same on / off button on top of the case.

"Hard" reboot

This reboot option is suitable if the iPad does not respond to any of the commands. Hold down the Power and Home buttons at the same time. You must wait 10 seconds. After that, the device should turn off. To turn it on, just hold down the Power button - and the iPad will work in the proper mode.

Using a hard reset should not be permanent. Do not use this method for any application problem. Otherwise, you will only harm the device's file system.

Reboot with iPad recovery

If your iPad freezes, you don’t know how to restart it and it has many hints of poor performance, you can try to completely restore the tablet. After this procedure, there will be two options:

• You will restore the iPad version from a saved backup;
• You will use the tablet from scratch, like new.

To do this, turn off the gadget in an acceptable way (see above). Thereafter:

• Connect iPad to your computer. The tablet does not need to be turned on.
• Open iTunes (the version of the program must be fresh).
• Press the Home button on the tablet and hold it.
• Follow iTunes prompts, click Restore iPad.
• We wait for the recovery to complete, then select the option to use the iPad.

These methods will help you quickly restart your iPad. Tablet recovery is recommended in cases where it has a lot of unnecessary applications, their cache. It happens that the memory is occupied by unknown data. Even by deleting programs and all files manually, it is not possible to restore the proper amount of free space. Recovery solves all problems.

Sometimes iPad freezes, stops responding to button presses or touches on the touch screen, or won't wake up from sleep or dial and won't turn off.

All of these problems can occur due to iPad freezing. This article will discuss the main problems and solutions.

The first problem that will be discussed in the article will be the freezing of the program on the iPad, which stops responding to any actions on your part. To force close the program, you need to press the "Sleep Mode" button and hold until the red slider appears. Once it appears, release the button. Next, you need to press the "Home" button and hold it for a few seconds. Do not try to drag the slider! If this method does not help you, then you need to force restart the iPad. This action will be described below.

The second problem in which the iPad freezes and does not turn off is that the iPad is completely unresponsive to certain actions you take, or some functions in the control section stop working properly. Then you need to force restart your device. To do this, you must perform the following steps: press the "Mode" sleep button and hold it until a red slider appears on the screen. Next, you need to smoothly slide your finger over this slider to turn off the ipad. If this does not help, then you can simply press and hold the "Sleep Mode" button until the ipad appears on the screen with the apple logo.

The second method is less preferable, because this way you will force a shutdown, and it is better to handle such a technique more gently.
The third and most common problem is iPad freezing when an image is open. In this case, you need to reset the device by simultaneously pressing the "Sleep" and "Home" buttons and hold for about a dozen or more seconds.

The most difficult problem in resolution is the problem of the iPad not displaying an image, and the iPad freezes and does not turn off. If there is no image, then do not panic and just turn on the device for charging. If after twenty minutes you cannot start it and there is no red battery icon on the screen, then you need to connect the iPad to the computer and try to restore it using iTunes. To restore, go to iTunes and click on the Restore panel.

It happens that the iPad is not displayed in the program, then using the same program, you must force the recovery mode to be turned on. I hope these tips help you if your iPad freezes and won't turn off.

How to restart iPad?

Why you need to restart your iPad

The iPad tablet is nothing more than a portable computer, therefore, like any personal computer, various failures and “freezes” are inherent in it. electronics tend to fail periodically.

Fortunately, iPad crashes and freezes tend to be extremely rare. But they do happen from time to time.

These glitches can be caused by a variety of reasons - from the application or operating system not working properly to any kind of hardware malfunction.

If the iPad is frozen or something is not working properly, such as programs crashing, it needs to be restarted. The restart process will close all applications running in the background, and you do not need to close them one by one. The most common problems that require a reboot are:

• blank or black display;
• the touch screen is not responding, that is, the iPad is frozen;
• Apps keep crashing

So, whether your iPad is frozen or you just want to restart it, when this desire arises, the corresponding question immediately arises: "How to restart the ipad?". On ordinary computers there has always been a magic reset button, on laptops we are used to holding the power button until the device is completely turned off. On the iPad, a reset or reboot can be done in several ways, or rather, two.

Method 1. How to Restart iPad - Standard Reboot

The easiest way to reboot is to hold down the iPad's on/off button, which is located on the top edge of the device. After a few seconds, the shutdown slider will appear on the screen, which must be moved to the right. After the iPad has turned off, you need to turn it on again - to do this, hold the same on-off button again.

Method 2. How to reset iPad - reset or hard reset

Sometimes it happens that the iPad stops responding to any of your actions, and does not react to anything at all. In this case, a simple reboot may not help and you need to use a hard reset of the tablet or the so-called reset of the iPad settings.

To reset the iPad, you must press and hold two buttons at the same time: the Home button (on the front side) and the off / on button on the top edge of the device. Hold them for at least 10 seconds until the Apple logo appears in the form of a small apple. To turn on iPad, press and hold the on/off button.

Can rebooting an iPad hurt?

It is worth noting that none of the above methods of rebooting an "apple" tablet can lead to data loss. Apps and games that are installed on your iPad will not be lost.

How to restart iPad mini if ​​it freezes

Fortunately, iPad mini, iPad 1, 2, 3, 4, air, that is, absolutely all iPad models are overloaded in exactly the same way.

Dark screen on iPad

If, despite attempts to reboot the tablet, the screen of the iPad remains dark and the device does not respond to your actions, then the problem may simply be that the battery is completely empty. In this case, plug iPad into a power source and let it charge for one hour.

After a few minutes, the charging screen should appear. But if it does not appear, then this does not mean that your iPad is charged. You may have a defective USB cable or power adapter, which happens quite often. Also, just in case, check if the cable is well inserted into the connector.

How to restart ipad. What to do if the iPad freezes. Options, ways to solve the problem.

Almost every owner of an Apple device is not immune from the incorrect operation of his device. Faced with the problem of freezing the "apple" electronic gadget, when the iPhone, iPad does not respond to any actions - touching the screen, pressing the "Home", "Power" keys, does not wake up from sleep mode, inexperienced users begin to panic. In fact, such a problem, unless of course it lies in a technical malfunction of the device, is solved very simply, and there is no need to resort to the services of service center specialists. You just need restart ipad, iphone. In this review, we will consider the reasons for the “freezing” of “apple” technology, simple effective methods, and options for solving this problem.

Restart iPad

During the operation of an "apple" device, users may experience that the tablet freezes while working with any application, program, the device does not go to the Home screen, there is no interaction with the sensor, the device does not respond to keystrokes, does not turn off, freezes on the "apple", for a long time does not come out of sleep mode. What to do, if iPad stuck, how to restart iPad? To resume the correct operation of the device, first of all, it is necessary to find out the reasons for such a failure in the electronic gadget.

Freezing of the iPad, other Apple can occur due to technical problems, failures in the operation of electronic modules, errors in the software, failure to update the firmware. Freeze iPad can if moisture, dust, foreign objects get inside the device case, as well as if the tablet overheats / overcools.

Most often, the incorrect operation of the device is caused precisely by failures, errors in the software. Therefore, do not rush to contact the service center, in most cases you can solve the problem yourself by restarting your iPad.

How to restart ipad

You can reboot "apple" devices, restart the system:

• in a standard way;
• hard reset (Hard Reset);
• by rebooting with software options.

Standard restart iPad

If the iPad does not freeze, but you need to reboot it using the standard method, press the Power button until a slider appears that says "Turn off". After the slider is displayed, drag it to the right with your finger. The shutdown will take from five to 20 seconds. The shutdown status icon can be seen in the center of the display. Then turn on the iPad by quickly pressing the Power key. After a while, the apple logo will appear on the display and the tablet will boot up again.

If the iPad screen does not respond to touch, it is not necessary to replace the touchscreen. The cause of the failure may be the freezing of the device or the incorrect operation of some applications. To determine why the sensor is not working properly, perform an initial diagnosis of the gadget at home.

If, after examining the iPad, you find that the screen is damaged or there are scratches on the tablet case, then you should contact qualified specialists. Mechanical damage to Apple products can lead to malfunction of internal components. In such cases, experienced craftsmen will be able to find out exactly why the screen does not respond.

The main reasons for the freezing of the sensor

Most often, the touch screen stops responding to finger touches due to system failures. The most common reasons are:

• presence of malicious files on the iPad
• software problems
• Jailbreak installed incorrectly
• some apps don't work properly

Any of these reasons can lead to problems with the touch screen of the device. If the iPad screen does not respond to touch due to hardware problems, then professional repair and replacement of defective parts is necessary.

Gadget recovery methods

If the reason that the touchscreen does not work is an application freeze or software failure, then you can restore the device yourself.

Effective and safe self-repair methods:

• force close all active applications
• screen cleaning
• 3D touch setting
• software recovery

Sometimes the iPad touchscreen does not work due to severe contamination of the display. Before restarting the device or taking it to a service center, carefully clean the glass from dust and dirt.

Also, the reason why the tablet stopped responding to finger presses may be a strong cooling or overheating of the device. To get the gadget working, leave the tablet turned off at room temperature for 20 minutes.

Hard reboot steps

To hard reset your iPad, follow these steps:

• unlock your device
• hold down the Power and Home button for 10 seconds
• simultaneously release the buttons after the logo appears

This shutdown is suitable for any models of Apple tablets.

If the device still won't unlock after a reboot, or if the touchscreen still doesn't work properly, try updating the software.

Steps to download new software:

• turn on iTunes
• connect tablet to laptop
• select your device in iTunes
• select the "Overview" category and click on the "Update" tab

Apple technology provides over-the-air software updates. To do this, put the gadget on charge, connect it to the Internet and select the “Software Update” category in the main settings.

If after that the touchscreen does not work well, it does not unlock, or the tablet does not turn on at all, then the motherboard, microcircuits are faulty, or the display module is damaged.

Professional repair from Yudu performers

Only qualified specialists can accurately and efficiently fix hardware problems. Experienced craftsmen are registered on the YouDo website, who, taking into account the technical parameters of the model, will eliminate any malfunction of the screens. Yudu professionals will determine exactly why the gadget has stopped responding to pressing, and then quickly in accordance with the manufacturer's recommendations.

If the iPad screen does not respond to touch, contact Yudu's performers, they guarantee urgency and high quality work.