Returning the old text boot menu. Local Group Policy Editor

The Creator Update has a special way of working under certain circumstances. What do the new features offer and how do I enable Gaming Mode in Windows 10?

What it is

The peculiarity of Windows 10 is that at the same time during operation it is started and used a large number of services. All of them start automatically, and it is quite problematic to control their work manually. Moreover, each windows service uses certain resources. Turning on additional program requires a lot of resources, which Windows may not "find", since they are involved in third-party elements that are not needed in this particular case.

The gaming system allows you to allocate more CPU resources to running program... As a result, there is no disruption to processes, services automatically "switch" resources without disruption or overload, and the user can enjoy the process to the maximum. This increases the frame rate per second, and all background processes no longer slow down the game.

Running

Turning on game mode Windows 10 provides for the following steps:

1. On the desktop, open the Start Menu Panel.
2. We select the "Parameters" section.

3. In the window that opens, select the appropriate block.

4. In the appeared card from the list of sections, open the "Game Mode".

5. After going to the page, you need to change the "Use game mode" parameters. To do this, simply move the indicator from the "Off" position to the "On" position.

6. Activation special features completed.

How to turn off Game Mode in Windows 10

The simple shutdown procedure is as follows:

1. In order to make a special order inactive, you need to do the same as when you turn it on.
2. Return the power indicator to the "Off" position.
3. The options will be disabled.

Accessibility after installing the Creator Update is set to On by default. When using similar technologies from AMD and NVIDIA, which optimize the system in their own way, it may be necessary to disable the game Windows mode 10.

If you install several "high-cost" software objects with different optimization technologies, Windows 10 provides effective solution... You need to do the following:

1. In the settings, as indicated above, disable special features.
2. Launch a game that requires special settings enabled for optimal performance.
3. Simultaneously press the keys "Win" and "G" and call a special panel.
4. In the window that opens, select "Settings".
5. Check the box "Use game mode for this game".

The problem of personal binding of special actions with specific program solved.

Pleased users with a new interesting function Continuum, which for the Russian-speaking audience is called "tablet mode". In this article we will tell you what this function is, how it is convenient and for which computers it is used, as well as how to enable it and how to disable it.

How do I put my computer into tablet mode?

Windows 10 provided us with two display options: desktop and tablet. If everything is clear with the first - this is the usual view of our familiar OS, then the second should be familiar with. Tablet mode greatly improves the usability of the OR Windows systems on devices equipped with and touch input, and the keyboard - the so-called "transformers".

In general, when you change the configuration of a laptop-transformer, the tablet mode is turned on and off automatically. As soon as we disconnect the keyboard, the system realizes that it's time to switch, we put the keyboard back in place - and Continuum turns off. Very comfortably! But in some situations or for certain types devices need to know how to perform this procedure manually. For example, when you want to temporarily remove Continuum on tablets that do not have a keyboard.

How do I enable tablet mode?

1 way

• Go to Settings, select System.
• Find the name in the left column of the menu desired function, and in the box to the right is a switch. With it, you can both remove the tablet mode and turn it back on.

Here you can configure what will start at logon: Continuum, normal desktop, or what was last used before shutting down the laptop.

The transition to Continuum can be done in the following ways: automatically, that is, without any user interaction, automatically, but with confirmation, only manually. You just mark in the settings the way that is convenient for you.

2 way

• Open the Notification Center.
• Click on Tablet Mode.

This method appeared later than the first, as many users complained that the manual transition was too long and inconvenient. The developers have placed a button to go to the panel quick action Notification Center. To customize this quick way, go the following way:

• Parameters;
• System;
• Notifications and actions;
• Choose quick actions.

How to turn it off?

To exit Continuum, you need to follow the same steps as to connect it: either go through the Action Center or through the Settings. Everything is very simple - use this function with pleasure, removing it or returning it back as necessary.

Turn on defender of Windows in Windows 10 - the right decision for all users, because it is a built-in antivirus that "on the fly" monitors all received files and opened pages. He will not let you get into the computer malware... If you have not installed antivirus from another manufacturer, then this service will help protect your PC. Below we will look at all the ways to enable the "native" antivirus.

Through parameters

Most obvious way how to enable Windows 10 defender - use the built-in graphical interface provided to manage the service.

First you need to start its control center. This can be done in the parameters window, or you can use the search.

On the left is a pictographic menu. The shield icon indicates the transition to the protection settings area. On the home screen, you see a warning that you need to enable Windows 10 Defender.

Press the power button. The warning will remain, since the defender consists of two parameters: the antivirus itself and the cloud one.

First click enabled Windows Defender in Windows 10, now click again to finish activating it.

All this can be done in additional parameters.

If the service is disabled in this way, it will be automatically launched upon reboot - the developers have provided for the automation of security installation.

However, sometimes we find ourselves in a situation where Windows 10 Defender does not turn on in any way. You see a message that the service is being managed by someone else, or an error message appears when you try to restart.

This is due to the fact that a user or program has disabled the service at the system level, in the registry or editor group policy... This means that you should enable Windows Defender in Windows 10 in the same way.

We use the registry

Launch a window for entering directives + [R] and type regedit.

Sequentially select HKEY_LOCAL_MACHINE \ SOFTWARE \ Policies \ Microsoft \ Windows Defender.

On the right side, look for the DisableAntiSpyware variable and set zero value by opening properties double click.

Make sure that in the "Real-Time Protection" section, all parameters starting with the word "Disabled" also have zero values.

Changing politics

This option is only suitable for professional and corporate versions... In the home, this function is not provided (in fact, the editor can be installed).

Open the policy management window: command execution window + gpedit.msc.

In the computer configuration area, we find administrative templates. Clicking on the arrow will open the list.

Then we need the components operating system and a link to an antivirus program.

Here you need to change the value of the shutdown service parameter. Open the properties by double clicking on it.

Win-updates-disabler program

This program gives user-friendly interface to manage the components, while the portable version does not need to be installed, you can simply open the file from the folder. Downloading.

Turning on Windows Defender in Windows 10 is carried out in the "Enable" tab. Check the box you want.

You can enable both the program itself and its service center. It is worth noting here that the service itself and the center of its settings are different components... Disabling the center does not disable the antivirus. You just lose the graphical interface.

Let's talk about how to enable Security Center windows defender 10: reopen the registry and navigate to Computer \ HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services \ SecurityHealthService.

In the variable start, specify the value 2.

After the restart, the center interface will become active again.

Many users who once worked with Windows XP remember that in this version of the system, in comparison with earlier modifications, quite a lot of innovations were introduced. One of these was the ability to create a quick launch bar for the elite custom programs... There was also a hibernation mode instead of sleep. Then some of the innovations disappeared. Further for consideration are offered questions related to quick start in Windows 10 in general, and how to turn it on or off (in several ways). But let's start by understanding the quick start processes themselves. There can be only two of them. And it will be about them that will be discussed.

Quick start in what is it?

Basically today the majority of users working with computer systems under the tenth Windows versions, under the fast start is meant only the exit from the hibernation mode. An obvious delusion! The fact is that in the top ten the possibility of activating the panel was also returned. quick start programs that were absent in versions of the system between XP and 10.

But what is Fast Startup in Windows 10 specifically in relation to hibernation? Without going into technical terms, these processes can be characterized as follows. When the computer is immersed in this mode, the program data and the system kernel are written to special file hiberfil.sys. When exiting this mode, the content of this file immediately carried over to RAM, which allows the system to "come to its senses" much faster than when using sleep, and all applications (and the system itself) are in that working condition, in which they were at the time of activation of hibernation.

Why might you need to disable Quick Start Mode?

But why, then, in some cases, it may be necessary to disable the fast Windows startup 10, if this regime has seemingly such undeniable advantages?

The point here is that when exiting hibernation, some drivers (most often the control software graphics adapters) may not work correctly and cause conflicts on system level, due to which the whole system hangs tightly. Sometimes this happens immediately after leaving, sometimes - after a short period of time. It would seem that you can simply reinstall or update the driver package and the problem will go away. However, as practice shows, Windows 10 is such that such actions do not always help. In addition, when the accelerated start is deactivated, the difference in time required to "bring the system to life" increases quite insignificantly, and the user practically does not feel it.

For that matter, standard means it is better not to use driver updates, but to install automated programs like Driver booster... Perhaps this will give the desired result (absolutely all system drivers that need to carry out such procedures will be updated or reinstalled, and without much user participation in the installation or update process).

Deactivating Fast Launch

Now directly on how to disable fast startup in Windows 10. For this, use the power section located in the "Control Panel" (the view must be switched to display icons, and the panel itself must be called with the control command in the "Run" console). On laptops, access to these settings is much faster using the RMB menu on the battery icon in the system tray.

In the options window, you first need to use the power button settings item, and then in the new window click on the hyperlink for setting parameters that are currently unavailable.

After that, in the shutdown options section, you just need to uncheck the box from the quick launch line and save the changes.

If hibernation is never used, it can be disabled in principle by running the powercfg -h off command in command console... In addition to deactivating hibernation, the hiberfil.sys file will be removed from hard disk with the release of a solid volume disk space... After that, in the power supply section, it is advisable to check the sleep mode options so that when the battery is critically charged (for laptops), the hibernation option is not installed.

Enabling quick start

You can enable fast startup of Windows 10, as already understood, in the same section, by performing the opposite step. However, sometimes, when entering the corresponding settings, the option may not be available (there is simply no such item there).

In this situation, the reason can be called the disabled hibernation mode (disconnection was described above). Here again you will have to use the command line and write the above command in it, putting the “on” parameter instead of “off” (without quotes), or execute the powercfg / hibernate on command, after which the option will appear in the settings of the current power scheme.

Registry Actions

Basically, Windows 10 fast startup can be turned on or off by setting key values system registry, whose editor is called through the Run menu with the regedit command.

Here you need to go through the HKLM branch, after which, through the SYSTEM directory and control sections, find the Power folder, which is located in the directory Session Manager... On the right, there is the HiberbootEnabled parameter. A parameter value set to zero corresponds to disabled fastboot, one to enabled.

Windows 10 Quick Launch: Activation

Finally, let's see how to activate the corresponding panel, designed to quickly start programs selected by the user.

First of all, through the RMB on the free area of ​​the "Taskbar" from the menu, select a section of panels, and then use the creation of a new panel. Next, you will be prompted to select a quick start folder.

In the folder name field, you need to write the abbreviation shell: Quick Launch and press the select button. After that, the corresponding panel will appear on the right side of the "Taskbar" after the separator. In the RMB menu on the created panel, it is necessary to deactivate the point of its pinning and uncheck the lines of displaying the buttons for viewing tasks, search and signatures.

Panel customization

Now, quickly launching programs in Windows 10 from the panel can be done by dragging and dropping application icons to the panel, in the same way as you add program shortcuts to the standard "taskbar". You can also add shortcuts to the created folder (usually, by default, it is located in the My Documents folder). After completing all required settings the panel can be docked when you no longer need to move it or replace elements in it. How appropriate its use is, everyone decides for himself. By by and large, a complete analogue of the usual "Taskbar" is created, only with a different location.

Instead of a total

Summing up, we can only note the fact that deactivation of fast startup is required only if the system has problems with freezing when exiting hibernation mode. There is no fundamental difference in waking up time. The user simply will not feel it. Increasing space by deleting the file responsible for saving the settings can also be attributed to controversial issues... As for activating quick launch of programs when creating additional panel accelerated start, there is also no particular sense here. It may be required only in cases where all the application icons on the "Taskbar" do not fit, and will be hidden in the quick launch. Saving space is the only plus. So, whether to activate this panel or not, the user must decide for himself.

Windows Quick Start - special treatment starting the operating system, allowing the system to boot faster than normal startup... This function is built into the operating room Windows system 10, it can be enabled or disabled on the computer.

For many users, it is important that the system boots as soon as possible, the Desktop opens to start working on the computer. You need to speed up your computer startup. You can fix the problem by using Windows Fast Boot.

Windows has various technologies to exit the disconnected state of the computer: sleep, hibernation, fast startup modes. The methods differ in implementation from each other, the user independently chooses the most suitable mode for turning off and starting the computer.

Fast Startup works only after the computer is physically disconnected. In other words, the quick start mode does not work when the PC goes to sleep or hibernation; the computer must be completely turned off. Fast Startup does not work when the operating system is restarted.

Fast Windows boot 10 uses hibernation technology, but differs in implementation from hibernation itself. During hibernation, the operating system is loaded on the computer and everything running applications that were working at the time of entering hibernation mode, and with fast startup, only the operating system is loaded, required programs the user will launch it on their own.

In this guide, we will look at how to quickly start Windows 10: enable this regime on a computer (2 ways), and disabling Windows 10 Fast Startup in three different ways.

How to enable fast startup of Windows 10 (1 way)

To enable Fast Startup in Windows 10, you need to have hibernation enabled on your computer, or this function will not work. There will be no corresponding item in the operating system settings to enable the quick launch mode.

Enabling hibernation in Windows:

1. Run command line as administrator in one of the ways.
2. Enter the command in the command line interpreter window, and then press the "Enter" key:

powercfg / h on

Enabling Fast Launch in Windows operating system settings:

1. Go to the Start menu, launch the Settings app.
2. Open the "System" section, enter the "Power and sleep" settings, in the "Related settings" option, click on the link " Extra options nutrition ".

1. In the Power Options window, in the left column, click on Power Button Action.

1. In the "System Settings" window, click on "Change system parameters that are currently unavailable. "

1. After that, the window will display the settings for the "Shutdown options" mode. Check the box next to "Enable Fast Startup (Recommended)", and then click on the "Save Changes" button.

Enabling Windows 10 Fast Startup (Method 2)

Windows 10 Fast Startup can be enabled using Registry Editor.

1. Start the Registry Editor, for example, enter the expression "regedit" (without quotes) in the "Search Windows" field, run the command.
2. In the "Registry Editor" window follow the path:

1. Click right click mouse over the value "HiberbootEnabled", select "Change ...".
2. In the window "Change DWORD (32-bit) parameter, in the" Value "field, put the value" 1 "(without quotes), and then click on the" OK "button.

How to disable fast startup of Windows 10 (1 way)

To disable Fast Startup in Windows, you can turn off hibernation on your computer. After turning off the hibernation mode, the quick start function will stop working.

Run Command Prompt as Administrator and then run the command:

Powercfg -h off

Disable Windows 10 Fast Startup (Method 2)

An easy way to disable Fast Startup: Disable mode in the Shutdown Options settings.

1. From the Start menu, launch Settings.
2. Enter the "System" section, go sequentially along the path: "Power and sleep mode" => "Related parameters" => "Additional power options".
3. In the "Select or configure a power plan" settings, click on "Action of the power button".
4. In the "Configure the power buttons and enable password protection" options, click on the "Change settings that are currently unavailable" option.
5. Uncheck the Turn on Fast Startup (Recommended) option, and then save your changes.

Disable Windows 10 Fast Startup in Registry Editor (Method 3)

You can turn off Windows Fast Startup using Registry Editor.

1. After starting the Registry Editor, follow the path:

HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ Session Manager \ Power

1. Double click the left mouse button on the "HiberbootEnabled" parameter.
2. In the window "Change DWORD (32-bit) parameter, enter the value" 0 "(without quotes), click on the" OK "button.

Conclusion

Windows 10 has Fast Startup Mode that makes your computer boot faster. Fast loading you can enable it in the operating system settings, or, conversely, disable fast startup on the computer in different ways.