Record ID: 35 does not exist!
Firmware DRE-4500 and DRS-4500:
Information for Tricolor TV Siberia subscribers using DRS-4500 or DRE-4500 receivers.
From April 21 to May 21, 2011 is being updated software hardware from Bonum-1 satellite
Who did not have time or for some reason could not update software on his receiver can use this zipped file and the instructions attached to it to self update software.
Do not forget! You perform all operations at your own peril and risk.
| Firmware DRE-4500 and DRS-4500 | |
| DRS 4500 | Save: October 18, 2011 |
| 33.0025.04.19 | |
| 2.0.126 |
|
| Database version | 2.0.91 |
| FULL FILE: | DRS4500_2_0_91_BD_2_0_126_PO_full.dre |
| Database File: | DRS4500_2_0_91_BD.dre |
| Software File: | DRS4500_2_0_126_PO.dre |
| DIGI RAUM ELECTRONICS DRE-4500 | Save: 05 May 2011 |
| Hardware version | 33.0004.04.13 |
| Software version | 2.0.126 |
| Database version | 2.0.91 |
| FILE: | DRE4500_2_0_91_BD_2_0_126_PO_full.dre |
| LOADER: | DRESetup.exe |
| Files are zipped | |
Instructions for updating the receiver software:
Attention: Do not turn off the power of the receiver while transmitting or receiving data! Connecting the RS-232 cable should be done only when the receiver is turned off (the power cord of the receiver is disconnected from the 220 V socket).
You perform all operations at your own peril and risk.
Software update: (from computer to receiver)
Turn off the receiver's power.
Open the *.dre file in DRE Burner: click "Open File" and specify the location of the file.
Click the "Upload" button.
Turn on the power of the receiver.
Saving software: (from receiver to computer)
Turn off the receiver's power.
Connect the RS-232 cable between the receiver and the PC.
Launch DRE Burner.
Turn on the receiver.
Press the "Menu" button on the receiver's remote control.
Select the "Settings" menu item.
Enter your PIN. The default is "0000".
Select the "Data transfer" menu item.
Click "Download" in DRE Burner.
Enter the name of the file under which you will save the software.
Click Save.
Press the FAV button (blue button) on the receiver's remote control
In connection with the launch in 2014 of the Express AT-1 (56E) satellite, which will replace its guarantee period operation of Bonum-1/DIRECTV-1R satellites, Tricolor TV Siberia subscribers will face the need to set up channels on their receiver (DRS/DRE-4500) from a new satellite, therefore:
In addition to the presented firmware for the DRS-4500 and DRE-4500 receivers, this article describes the procedure for setting up the receiver for a satellite.
receivers DRS-4500 and DRE-4500were supplied to the market with an access card for viewing Tricolor TV Siberia channels (currently, the receivers of these models are out of production), so we will consider the description using the example of tuning to Bonum-1 / DIRECTV-1R satellites still operating at the time of writing.
After the launch of the new satellite, we will make changes to the article proposed for review with the exact data on setting up channels from the new satellite.
So, in order:
1. Press the =MENU= button on your receiver's remote control.
The main menu in which the menu item " is already highlighted in yellow Search channels TricolorTV"
2. Press the =DOWN ARROW= button on your receiver's remote control once (
3. Press the =OK= button on your receiver's remote control.
Automatic search"
0
= on the remote control of the receiver)
4. Press the =ARROW UP= button on your receiver's remote control once (The button is located above the button =OK=)
The result of pressing the button will be the menu item highlighted in yellow " Factory settings"
5. Press the =OK= button on your receiver's remote control.
The result of pressing the button will be the screen that appears with the title - Factory settings- on your TV screen, which will display " Attention! All channels and receiver settings will be deleted"
6. Press = RED = the button next to the green button on your receiver's remote control.
The result of pressing the button will be displayed on the screen additional submenu " Reset " and the inscription in the screen of this menu - "Are you sure?"
7. Press the =LEFT ARROW= button on your receiver's remote control once (The button is located to the left of the =OK= button)
The result of pressing the button - the word "YES" will turn yellow in the "Reset" submenu
8. Press the =OK= button on your receiver's remote control.
The result of pressing the button will reboot the receiver and the screen that appears with the title - Language setting - on your TV screen, Further "
9. Press the =OK= button on your receiver's remote control.
The result of pressing the button will be the screen that appears with the title - AV output setting- on your TV screen, in which the menu item " Further "
10. Press the =OK= button on your receiver's remote control.
The result of pressing the button will be the screen that appears with the title - Automatic search- on your TV screen, in which the menu item " Further "
11. Press the =OK= button on your receiver's remote control.
Search channels TricolorTV- on your TV screen. Wait for a submenu with the name to appear in the center of the screen.Search channels TricolorTV and the inscription " Programs not found"
12. Press the =OK= button on your receiver's remote control.
The result of pressing the button will be the screen that appears with the title - Time setting- on your TV screen, in which the menu item " OK "
13. Press the =OK= button on your receiver's remote control.
The result of pressing the button will be a submenu that appears in the center of the screen with the heading -Information - and the inscription "Empty List"
14. Press the =MENU= button on your receiver's remote control.
Search channels TricolorTV"
15. Press the =DOWN ARROW= button on your receiver's remote control once (The button is located under the button =OK=)
The result of pressing the button will be the menu item "Settings" highlighted in yellow
16. Press the =OK= button on your receiver's remote control.
The result of pressing the button will be the screen that appears with the title -Settings - on the screen of your TV, in which the menu item " Automatic search"
(If an additional submenu "Enter PIN" appears on the screen, press the number button = four times in sequence 0
= on the remote control of the receiver)
17. Press the =DOWN ARROW= button on your receiver's remote control once (The button is located under the button =OK=)
The result of pressing the button will be the menu item "Manual search" highlighted in yellow
18. Press the =OK= button on your receiver's remote control.
The result of pressing the button will be the screen that appears with the title -Manual search - on the screen of your TV, in which the menu item "Antenna" is already highlighted in yellow
19. Press the =DOWN ARROW= button on your receiver's remote control five times (The button is located under the button =OK=)
The result of pressing the button will be the menu item "FEC" highlighted in yellow
20. Press the =LEFT ARROW= button on your receiver's remote control three times. (The button is located to the left of the =OK= button)
The result of pressing the button will be the yellow highlighted menu item "FEC " equal to "Auto" (before pressing it was "3/4 " )
21. Press the =DOWN ARROW= button on your receiver's remote control once (The button is located under the button =OK=)
The result of pressing the button will be the menu item "Start search" highlighted in yellow
22. Press the =OK= button on your receiver's remote control.
The result of pressing the button will be the screen that appears with the title - Network search - on your TV screen. Wait for the submenu to appear " Network search ". The screen will display the number of found channels and the button is highlighted in yellow" Yes"
23. Press the =OK= button on your receiver's remote control.
The result of pressing the button will appear a screen with the heading -Manual search - on your TV screen, in which the menu item " Antenna"
24. Press the =EXIT= button on your receiver's remote control.
The result of pressing the button will be the screen that appears with the title -Settings - on the screen of your TV, in which the menu item "Manual search" is already highlighted in yellow
25. Press the =EXIT= button on your receiver's remote control.
The result of pressing the button will be the screen that appears with the title -Main menu - on the screen of your TV, in which the menu item "Settings" is already highlighted in yellow
26. Press the =EXIT= button on your receiver's remote control.
The result of pressing the button will be the screen broadcasting the first (Information channel) Tricolor TV.
CONGRATULATIONS! Setup completed!
Firmware DRE-4500 and DRS-4500:
Information for Tricolor TV Siberia subscribers using DRS-4500 or DRE-4500 receivers.
In February 2013, the software is being updated from the DirecTV 1R satellite
Those who did not have time or for some reason could not update the software on their receiver can use this archived file to update the software on their own.
Do not forget!
| Firmware DRE-4500 and DRS-4500 | |
| DRS 4500 | Save: 04 Feb 2013 |
| NEW FILE: 2012_12_19_DRx4500_hw0413_0419_2_1_209.zip | |
| Hardware version | 33.0022.04.19 |
| Software version | 2.1.209 |
| Database version | 2.1.209 |
| FULL FILE: | DRS4500_hw0419_2_1_209+BD.zip |
| Database File: | DRS4500_hw0419_2_1_209_BD.zip |
| Software File: | DRS4500_hw0419_2_1_209_PO.zip |
| DRS 4500 | Save: October 18, 2011 |
| FILE: | |
| LOADER: | DRESetup.exe |
| Files are zipped | |
Instructions for updating the receiver software:
Attention: Do not turn off the power of the receiver while transmitting or receiving data! Connecting the RS-232 cable should be done only when the receiver is turned off (the power cord of the receiver is disconnected from the 220 V socket).
You perform all operations at your own peril and risk.
Software update: (from computer to receiver)
Turn off the receiver's power.
Open the *.dre file in DRE Burner: click "Open File" and specify the location of the file.
Click the "Upload" button.
Turn on the power of the receiver.
Saving software: (from receiver to computer)
Turn off the receiver's power.
Connect the RS-232 cable between the receiver and the PC.
Launch DRE Burner.
Turn on the receiver.
Press the "Menu" button on the receiver's remote control.
Select the "Settings" menu item.
Enter your PIN. The default is "0000".
Select the "Data transfer" menu item.
Click "Download" in DRE Burner.
Enter the name of the file under which you will save the software.
Click Save.
Press the FAV button (blue button) on the receiver's remote control
From February 03, 2016, new software will be launched for receiving equipment models DRE-4000, DRE-5000, DRS-5001, DRS-5003, and DRE-7300 and GS-7300 aimed at improving and improving the operation of this receiving equipment.
Before starting the update, go to the "Status" menu item and make sure that Current version receiver software is 3.4.369 . If your receiver has a different software version than the specified one, the correctness of the update is not guaranteed.
After performing the update, the receiver software version should change to 3.4.432 .
ATTENTION! Do not turn off the power of the receiver until the update procedure is completed! Otherwise, the receiver may be damaged!
To update the software of the receiver and the module, do the following:
1. Unplug the receiver's power cord from the outlet, and then plug the receiver back into the mains.
2. Switch the receiver to the Tricolor TV Info Channel.
3. After a few seconds, a message will appear on the screen asking you to update the receiver software in the following way:
Rice. one
When this message select the option "Yes" and press the "OK" button on the remote control.
4. After agreeing to update the receiver software, service messages about the process of updating the receiver software will appear on the screen. Updating the receiver software takes about three minutes.
5. Upon completion of the software update, the receiver will reboot and turn on in the channel viewing mode.
6. After the software update is completed, go to the “Status” menu and make sure that the receiver software version has changed to 3.4.432.
Rice. 4
7. This completes the receiver software update, and the receiver is ready for further work.
1. Connect the receiver to the tuned antenna, turn it on.
2. Press the "MENU" button.
3. Arrow down on "Settings", press "OK".
4. The prompt "Enter PIN CODE" will appear.
5. Enter "0000" (press 0 four times) and go to settings.
6. Use the arrows down to go down to the "Organization of channels".
7. Go to the "Channel Organization", press OK, OK to enter the channel editor.
8. Press the "LAST" button to select ALL channels. Whoever did not find the LAST button, he meticulously presses the red button and deletes the channels one by one
9. Press the RED BUTTON to reset the channel list. We check that all channels have been deleted. Exit "EXIT", "EXIT"
10. In the "Settings" section, go up with the arrows and go to "Manual Search".
11. Check the parameter values line by line.
12. The first line "Antenna" is equal to "1". We check and do not touch.
13. The second line "Satellite" - select the satellite Bonum1 / DirecTV1R, there are other satellites, you need to open the list and find the one you need.
14. The third line "Frequency" - select the frequency 12355 or dial the number in digits, although usually this frequency is already there and is in the list.
15. The fifth line "Polarization" is equal to "Left". We check and do not change.
16. The sixth line "Flow rate" - should be 21500. We make sure that it is, if a different number can be typed in numbers.
17. The seventh line "FEC" is equal to "2/3" or "3/4". Expand the list and select "1/2"
18. After changing the FEC value to 1/2, a signal percentage should appear below, the signal should be more than 70%, preferably 80%, the more the better
19. Go to "Search for channels" and search for channels.
20. We save the found channels. Let's check what it shows.
Official:
New satellite "DirecTV-1R" in Siberia.
Attention! In connection with the termination of broadcasting of TV channels from the Bonum1 satellite and the start of broadcasting from the DirecTV-1R satellite, the software update period is extended until 15.03.2013 . detailed information about the update for each model of receiving equipment is published on our website, as well as on the Tricolor TV Infochannel.
Satellite software update for model receivers DRS-4500, DRE-4500, DRE-5500, GS-8300 (M, N), GS8305, GS8306, HD9303 will be to 15.03.2013.
ATTENTION! Before you start updating the receiver softwareDRS-4500, DRE-4500, DRE-5500, GS-8300 (M, N), HD9303 must be completed manual search TV channels on your receiver.
Press the "Menu" button on the remote remote control receiver, then select "Settings" and press the "OK" button. After that, select "Manual search", press the "OK" button and enter required parameters in the corresponding lines on the TV screen:
- Satellite Name: Bonum 1
- Frequency: 12355
- Polarization: Left
- Modulation: QPSKDVB-S
- Flow rate: 21500
- FEC: ¾
Now you need to select the "Advanced" item and click the "OK" button. In the menu that opens on the TV screen, set the value to "YES" in the item " Network search”, then press the “Exit” button to return to the “Manual Search” menu, select the “Start Search” item and press the “OK” button.
You can find instructions for further updating the software from the satellite.
Important! If the hardware software is not updated before the end of the specified period , since March 16, 2013 watching TV channels "Tricolor TV-Siberia" on this equipment will be impossible.
If you own receivers modelsGS8302, GS8304 , or you cannot update the software from the satellite within the specified period, you need to update the software yourself by downloading files from the site, or contact an authorized Tricolor TV dealer or service center.
You can download files with updated software for your receiver model here:
Equipment model | Receiver software version/module software version |
|---|---|
1.2.196 / 0.8.32 |
|
0.21.131 /02.00.11 |
|
0.31.131 /02.01.00 |
|
DRE-5500- |
Dear subscribers!
For technical reasons, there may be interruptions in signal reception from subscribers after preventive work January 21, 2015 from 02:00 to 10:00, manifested in the encoding of TV / radio channels "Tricolor TV".
If problems occur, the receiving equipment must be rebooted.
If necessary, send reactivation commands.
We apologize for any inconvenience.
Your "Tricolor TV"
And you have a receiver models DRS-4500, DRE-4500, DRE-5500 then click HERE.
If you have other Tricolor models, then click HERE.
1. Owners of receiving equipment models DRS-4500, DRE-4500, DRE-5500, CI7101s, as well as modules CAM-Siberia-DRE reset to factory settings.
To do this, press “Menu” on the receiver’s remote control, select the “Settings” item, press the “OK” button, then “Manual search”, confirm the selection by pressing the “OK” button and specify the following parameters in the window that appears:
Satellite name: Not important
Frequency: 12355
Polarization: Left
Flow rate: 21500
FEC: 1/2
Important! The item "Network search" should be set to "YES" ("Menu" - "Settings" - "Manual search" - "Advanced" - "Network search" - "YES").
Then you need to select the "Start search" item in the "Manual search" menu and press the "OK" button. Attention! For equipment not manufactured General Satellite, the setting path may be different. If, after re-searching channels, the list of programs is displayed incorrectly, then you need to clear the list of programs through the "Menu" - "Settings" - "Organization of channels" and repeat the re-search again. We apologize for the inconvenience caused.
2. Owners of receiving equipment models GS–8300, GS–8300N, DRS-8300, GS–8300M, GS 8302, GS 8304, GS 8305, GS 8306, HD-9300, HD 9303, GS-8307,GS-8308, DRS -8308 reset to factory settings. Re-search of TV channels "Tricolor TV".
To do this, press "Menu" on the receiver's remote control, select "Search for Tricolor TV channels" "OK" and update the list of TV channels, following the prompts on the TV screen.
On the night of February 3-4, 2014, from 2:00 to 10:00 (Moscow time), preventive maintenance will take place, during which the composition of the Maximum HD and Optimum packages in the broadcast area of the DirecTV-1R satellite will change. In order to improve the stability of the signal from the DirecTV-1R satellite, on the eve of the Winter Games, on the night of February 3-4, 2014, from 02:00 to 10:00 (Moscow time), work will be carried out, after which the broadcasting of the following TV channels will be suspended:
"Mother and Child", "Nano TV", "Many TV", "India TV", "RTG TV", "Tonus TV", "Zoo TV", "Comedy TV", "365 Days", "NSTV", OTV Chelyabinsk. The broadcasting of these TV channels will be resumed after the launch of a new satellite, scheduled for March 4, 2014 according to the Federal State Unitary Enterprise "Space Communications", its arrival at the point of standing and testing the performance of the onboard equipment. At the end of maintenance work, in order to resume watching other Tricolor TV-Siberia TV channels from 10:00 (Moscow time) on February 4, 2013, you must:
Setting up and repairing the Tricolor TV receiver in Bratsk, Padun, Energetika: Gidrostroiteley 57 t 270353.
