Tricolor description. Setting up Tricolor TV yourself: step by step instructions

On July 20, 2017, changes were made in broadcasting aimed at dividing regional TV channels into corresponding lists and designed to make viewing these TV channels more convenient.

This page contains instructions for all models of receivers (see below on the page).

Instructions for setting up the Tricolor channel list for receivers GS E501, GS E502, GS C591, GS C5911, GS U510

4. Select the operator "Tricolor TV" and, if necessary, the antenna settings you need (with a standard connection of the receiver to the antenna, it is recommended to leave the default settings). Then click the "Continue" button.

5. Select the region that suits you. 3 regions will be available for selection - "Main", "Moscow +0 h." and "Moscow +2 hours."

6. Wait until the search for TV channels is completed and save the found TV channels.

Instructions for configuring the channel list for receivers GS U210, GS U210 CI, GS B210, GS B211, GS B212, GS E212, GS A230

To display the list of TV channels correctly, do the following:

1. Press the "Menu" button on the remote control and select "Applications".

2. Select "Setup Wizard".

3. Set the time, time zone and language of the receiver menu, and then press the "Search" button.

4. Select the operator "Tricolor TV" and, if necessary, the antenna settings you need (with a standard connection of the receiver to the antenna, it is recommended to leave the default settings). Then click the "Continue" button.

Attention! You must choose one of two regions - "Moscow +0 h." or "Moscow +2 hours."- depending on the region of your residence. In the first case, all TV channels will be broadcast according to Moscow time, in the second, some of the TV channels will be broadcast with a time offset of +2 hours from Moscow time.

If you select "Main" region, one information TV channel will be saved in the channel list.

Instructions for configuring the channel list for receivers GS B520, GS B521, GS B521L, GS B522, GS B531M, GS B532M, GS B533M, GS C592

To display the list of TV channels correctly, do the following:

1. Press the "Menu" button on the remote control and select "Applications".

2. Select "Setup Wizard".

3. Set the time, time zone and language of the receiver menu, and then press the "Search" button.

4. Select the operator "Tricolor TV" and, if necessary, the antenna settings you need (with a standard connection of the receiver to the antenna, it is recommended to leave the default settings). Then click the "Continue" button.

5. Select the region that suits you. 3 regions will be available for selection - "Main", "Moscow +0 h." and "Moscow +2 hours."

Attention! You must choose one of two regions - "Moscow +0 h." or "Moscow +2 hours."- depending on the region of your residence. In the first case, all TV channels will be broadcast according to Moscow time, in the second, some of the TV channels will be broadcast with a time offset of +2 hours from Moscow time.

If you select "Main" region, one information TV channel will be saved in the channel list.

6. Wait until the search for TV channels is completed and save the found TV channels.

Instructions for setting up the channel list for HD 9303, HD 9305 receivers.

To display the list of TV channels correctly, do the following:

1. Press the "Menu" button and select "Search for Tricolor TV channels".

2. On the region selection screen, select the region that suits you. 3 regions will be available for selection - "Main", "Moscow +0 h." and "Moscow +2 hours."

Attention! You must choose one of two regions - "Moscow +0 h." or "Moscow +2 hours."- depending on the region of your residence. In the first case, all TV channels will be broadcast according to Moscow time, in the second, some of the TV channels will be broadcast with a time offset of +2 hours from Moscow time.

If you select "Main" region, one information TV channel will be saved in the channel list.

3. Wait until the search for TV channels is completed and save the found TV channels.

Instructions for configuring the channel list for receivers GS 6301, GS 8305, GS 8306, GS 8307, GS 8308, DRS 8308.

To display the list of TV channels correctly, do the following:

1. Press the "Menu" button on the remote control and select "Applications".

2. Select "Setup Wizard".

3. Set the language of the receiver menu, then press the "Forward" button.
4. Set the time and time zone, then click Search.

5. Select the operator "Tricolor TV" and, if necessary, the antenna settings you need (with a standard connection of the receiver to the antenna, it is recommended to leave the default settings). Then click the "Continue" button.

6. Select the region that suits you. 3 regions will be available for selection - "Main", "Moscow +0 h." and "Moscow +2 hours."

Attention! You must choose one of two regions - "Moscow +0 h." or "Moscow +2 hours."- depending on the region of your residence. In the first case, all TV channels will be broadcast according to Moscow time, in the second, some of the TV channels will be broadcast with a time offset of +2 hours from Moscow time.

If you select "Main" region, one information TV channel will be saved in the channel list.

7. Wait until the search for TV channels is completed and save the found TV channels.

Instructions for tuning channels for TVs with CI + module.

To display the list of TV channels correctly, do the following:

1.Put your TV into satellite tuning mode. To do this, go to the section for setting up signal sources (antennas) in the menu of your TV.

2. In the settings section, select the "Manual setting" item and go to it.

3.Before starting channel search, make sure the following manual search parameters are set:

Network search option is enabled.
Frequency (transponder) - 12226 (H / L)
Symbol rate - 27500
Satellite - Eutelsat 36E

Enter these parameters manually, if necessary.

4. Start a channel search and follow the instructions on your TV screen. During the search, the TV should display information about the search progress and the channels found.

5. At the end of the process, confirm the storage of the channel list (the request may not appear on some TV models).

One of the main advantages of satellite television over terrestrial television is the ability to use a number of useful services. In addition to providing a high-quality signal, Tricolor TV digital television operators regularly improve the software of their equipment. This procedure allows not only to improve the functionality of the receiver, but also to expand the parameters of its operation.

The last software upgrade took place in June 2017. You can get information about the work on the official website of Tricolor TV. There is also given exact information on how to update the Tricolor TV receiver, depending on its model.

Over time, users of Tricolor digital television begin to notice problems with the operation of the receiver. This may be a freeze of channels, the absence of some of them, sometimes the device simply does not turn on, etc.

Malfunctions of this nature, most often due to outdated software.

And to eliminate them, you do not need to call the wizard, since it is possible to update yourself.

How to update the software of the Tricolor TV module? Initially, to determine the reasons for the incorrect operation of the receiver, you need to make sure that the problem is associated with an outdated software version. To do this, select the "Status" section in the menu and view the current software version. This can be done in the user's personal account.

And if your version does not match the latest available update, then the best solution is to perform the procedure as soon as possible.

After that, all the innovations of the developers will become available.

On the specialized digital television channel Tricolor TV, software updates are provided to all users. You can change the software using the remote control on your own TV screen. This method is the most convenient and does not cause much trouble.

Step-by-step guide to action

Seeing such an image on the screen, you need to perform certain actions, as a result of which updates will be installed. It is recommended that you strictly adhere to the instructions below:

1. Unplug the receiver from the outlet. Wait a while and turn it on again. Then tune in to the information channel, where information about the available update will be displayed.
2. By choosing a positive answer about changing the update. Confirm your consent to launch an automatic process during which the necessary data will be loaded.
3. Next, the receiver will be flashed. This stage is the most important in updating the receiver. Therefore, it is necessary to provide all conditions so that there is no power outage. Otherwise, premature shutdown of the download will lead to damage to the device, which can only be eliminated by a specialist.
4. After 15 minutes, the update will be complete. A message will appear on the screen stating that the installation is complete. The next step is to reboot the receiver. This process is automatic and does not require intervention. If for any reason this does not happen, you must reboot the receiver yourself.
5. The receiver update process is complete.

After installing the updated software, the receiver settings are reset to the factory settings. Therefore, it is necessary to re-configure the language, operator and other settings. The "Installation Wizard" will help you with this.

In order to make sure of the correctness of the performed actions, it is necessary to enter the “Status” menu again and look at the information about the receiver's software. If everything is done correctly, the version that was announced earlier will be displayed.

Change of software depending on the receiver model

As stated earlier, the update instruction may fluctuate depending on the receiver model you are using.

It should be remembered that the software for specific set-top boxes broadcasting satellite TV is released at different times.

For example, for the GS B520 model, the latest software was launched on June 5, 2017, while for the GS-8300 and other receivers in this series, the software was updated only in the fall of 2016.

The exact information on how to update the software of the module and how to do it, specifically for your receiver, can be found on the official website of the company or in the help desk of the company. Regular software updates will reduce the risk of problems and help to ensure the correct operation of the channels.

Satellite HD Receiver GS 9305, new in 2013. Manufactured by General Satellite, the company is a manufacturer of equipment for the satellite television operator Tricolor TV. The receiver allows you to receive all Tricolor packages such as: Maximum HD, Optimum, Super-Optimum, as well as additional packages: Cinema Tricolor TV, radio package, etc. The receiver is equipped with a built-in access module DRE Crypt version 3.

The satellite receiver is sold in a colorful box, equipped with an internal power supply. The receiver is completed with: remote control, AAA batteries - 2 pcs., HDMI cable 0.7 meters, smart card Tricolor TV HD. The cost of the receiver includes a subscription to the packages: Maximum HD, Optimum and Super-optimum for a period of 1 year.

Receiver Tricolor TV HD-9305 has compact dimensions, receiver dimensions (mm): 250 * 180 * 38. HD receiver Tricolor TV, made on the basis of the ST7111 processor, with 32 MB of flash memory and 256 MB of RAM.

The HD 9305 receiver allows you to receive Tricolor TV channels in the following formats: MPEG2, MPEG-4 / AVC, the picture is reproduced on the TV at 1080i / 720p / 576p resolutions. It allows receiving a signal in both the DVB-S and DVB-S2 standards, in the frequency range from 950 to 2150 MHz.

Today it is the most functional, in terms of options, model of a satellite HD receiver from the list of those recommended by Tricolor TV, which allows viewing the "Maximum HD" package, which includes more than 25 channels in HDTV quality.

Unlike the GS 8306 model, GS 9305 has several additional options: it allows you to work with motorized systems, DISEq switches, this makes it possible to connect several satellite dishes to the receiver, and receive a signal from different satellites, such as Hotbird, Astra, Sirius, etc.

Unlike the GS 9303 model, the HD 9305 receiver is equipped with a bells connector - this provides the possibility of simultaneous operation of the HDMI output and bells, this option can be useful if you intend to distribute a television signal to several TVs, provided that all television receivers the same channel will be shown. For separate viewing, a satellite receiver must be connected to each TV.

The receiver has such functions as: a detailed TV program guide, with detailed descriptions and announcements of films and programs, which is called a TV guide (EPG), teletext, TV chat, Tricolor TV TV mail, subtitle support, a timer, etc.

This device has the richest functionality, equipped with an optical SPDIF output, which allows you to connect audio systems.

You can always buy GS 9305, or buy a set of Tricolor TV, in our company, telephone in Murmansk: 23-63-35 and 750-335.

Description of connectors and pre-paniels of the HD 9305 receiver

In terms of dimensions, the HD receiver is similar to previous models such as: GS 9303. On the front panel of the receiver there is a button to turn on / off the satellite receiver, a slot for a Tricolor TV smart card, the card is inserted with the chip up.

Front panel GS 9305

The satellite receiver is equipped with a 7-segment 4-digit display, which displays: indication of satellite signal reception, indication of TV / Radio mode, time display, etc.

1. Screen - shows the number of the received television channel or radio station, special symbols for indicating the reception of a satellite signal, broadcasting / radio broadcasting modes, standby ("Standby"), mail symbol, current time.
2. KEY "STANDBY" - intended for switching between standby and operating modes. Green key indication - operating mode of HD 9305 receiver. Red key indication - standby mode.
3. Keys - go to the next / previous channel or radio station.
4. KEY "TV / R" - transition from the mode of receiving Tricolor channels to receiving radio stations.
5. Connector FOR SMART CARD Tricolor TV

Keys for switching to the next / previous TV channel or radio station (3), keys for switching the modes of receiving channels or radio stations (41, smart card slot (5) is located under the folding right part of the front panel of the satellite receiver.

Rear panel of HD 9305

1. CONNECTOR "LNB OUT" - an output with which you can connect the next Tricolor TV receiver, the so-called loop output.
2. CONNECTOR "LNB IN" - an input for connecting a coaxial cable coming from a satellite dish converter.
3. "USB" port - intended for connecting a flash drive, used when updating the firmware of the satellite receiver.
4. CVBS CONNECTOR - composite analog video signal output (yellow connector). It is used when the receiver is connected to a TV during standard SD broadcasting.
5. CONNECTOR "AUDIO L / R" - two outputs for audio connection. The right channel (R) is red and the left channel (L) is white.
6. HDMI CONNECTOR - used when connecting a satellite hd receiver to a TV in HDTV mode.
7. S / PDIF CONNECTOR - a connector for connecting an optical audio cable. Digital audio output.
8. POWER SWITCH - switch of the receiver's power supply. Position 0 - off, position I - on.

Remote control for satellite receiver GS 9305

The remote control is similar to the remote control of the previous models: GS 9300 and GS 9303. The remote control can be conditionally divided into three segments:

The first segment answers - flipping through TV and radio channels, switching between TV and RADIO channels, the Satatus button makes it possible to see the ID of the Tricolor TV receiver, software version and other technical data.

The second segment is a call to the TV and radio channels menu, with the OK button, there are also buttons for scrolling through channels and adjusting the volume. At the bottom there are multi-colored keys for controlling the GS9305 submenu.

The lower segment is not used in the current receiver configuration.

A more detailed description of the receiver's remote control keys is presented below:

1.1 Front and side panels GS 8306 HD

1. Key "Power on / off"- on / off the power of the receiver. Power on - The button is illuminated and blinking. Power off - The button is lit.
2. Volume keys- volume control when watching TV channels and listening to radio stations.
3. Channel keys- switching channels and radio stations.
4. Receiver of signals, remote control.
5. Smart card slot Tricolor TV Super start.

1. LNB IN- connector for connecting a coaxial cable from a satellite dish.
2. LNB OUT- connecting the next satellite receiver ("loop out").
3. CVBS- analog video output "bells" for connection to a TV set (yellow connector - video, white and red - sound).
4.USB - connecting a flash drive, firmware update for GS 8306 receiver.
5. HDMI- a connector for connecting to a TV via HDMI.
7. Power supply connector.

1. STANDBY BUTTON- used to switch between standby and working mode. 2. TIME BUTTON- single pressing of the button will display the time on the display of the receiver. Double-clicking displays the current time in the upper right corner of the TV screen. 3. BUTTON "SOUND"- temporarily turning off the sound. 4. BUTTON "SIGNAL IN."- sequential switching between audio / video output interfaces (CVBS or HDMI). 5. TV / RADIO BUTTON- switching between the modes of receiving TV and radio channels. 6. NUMERICAL BUTTONS- calling TV and radio channels by number and entering numerical data. 7. BUTTON "TV CHAT"- call "Tricolor TV-Chat". 8. "MENU" BUTTON- "Main menu". In menu mode, it is used to exit the menu and return to watching TV. 9. BUTTON BLOCK- Cursor buttons. Used to navigate between menu items, as well as to select options for any settings. When watching TV channels, the buttons switch to the TV channel forward / backward in the list, the buttons adjust the volume. 10. BUTTON "TELEGUIDE"- "Electronic Program Guide". 11. RED BUTTON "F1"- A single press while watching a TV channel brings up an info banner. Pressing it again brings up detailed information about the program and TV channel. Has additional functions when operating the on-screen menu.

12. GREEN BUTTON "F2"- call up the list of audio tracks available for the given TV or radio channel. Has additional functions when operating the on-screen menu. 13. PVR BUTTON BLOCK- a block of buttons of the built-in digital video decoder (PVR). Control buttons for recording, as well as playback of previously recorded programs. 14. BUTTON "ORDER FILM"- call the interface for ordering films. 15. "STOP FRAME" BUTTON- activation of the "STOP FRAME" function. 16. WWW BUTTON- a call to the satellite Internet interface. 17. YELLOW BUTTON "F3"- menu for working with teletext and subtitles. 18. BLUE BUTTON "F4"- Button functions are determined by the OSD. 19. BACK BUTTON- switch to the previous viewed / listened to TV or radio channel. 20. OK BUTTON- when watching / listening to a channel, calls the list of channels. In other cases, it is used to select menu items or confirm an entry. 21. EXIT BUTTON- Used to interrupt / cancel operations, to go to the previous menu screen, exit from the "Main Menu". 22. BUTTON "TV MAIL"- button for calling the Tricolor TV-Mail service. 23. BUTTON "No. ID"- on-screen menu "Status" of the receiver.

Connecting a satellite dish to the GS 8306 receiver.

Attention! Make all connections only when the satellite receiver is disconnected from the power supply!

Connect the coaxial cable from the satellite dish converter to the LNB IN receiver. The connection is made with a F-type connector. Use of adapters is allowed. If necessary, connect a second satellite receiver via the LNB OUT.

Connecting the GS 8306 receiver to a TV using an HDMI cable.

Connect the HDMI connector of the cable to the HDMI output of the satellite receiver, and the other connector of the cable to the HDMI input of the TV.

Connect the bells red and white corresponding to the color of the audio outputs on the receiver. Connect the 2 RCA connectors on the other end of the cable to the corresponding color-coded audio inputs on your TV. The yellow plug of the cable goes to the VIDEO output of the receiver, and the plug on the other end of the cable to your TV's video input is yellow

3.1 Turning on / off the receiver.

Attention! Switch on the receiver only after all the necessary connections have been made!

1. Insert the smart card into the appropriate slot. The contact pad (gold) of the smart card must be facing downward in relation to the satellite receiver, and the direction of the arrow next to it must match the direction of the smart card in the slot.
2. Connect the plug of the ac power adapter to the 12V, 1.8A jack on the back of the receiver.
3. Connect the plug of the ac adapter to a power outlet.
4. When you turn on the receiver for the first time after connecting the AC adapter plug to the mains, the receiver will turn on automatically.

Switching off GS 8306 is performed in the reverse order: 1. Press the “STANDBY” button on the remote control (the receiver will go into standby mode, and the flashing backlight of the “Power on / off” button on the front panel of the receiver); 2 Unplug the power adapter from the outlet; 3. Unplug the ac adapter from the back of the receiver.

When the satellite receiver is turned on for the first time, the Setup Wizard starts. It is designed in such a way that in just a few steps you can enter the necessary settings and easily find all the TV and radio channels you are interested in. Since all the default settings are optimized for the most simple and common cases of Tricolor TV receiver settings, you most likely only have to press the "OK" button on the remote control.

Step 2 This step is the final stage of the Installation Wizard. At this stage, the receiver searches for Tricolor TV TV channels and radio stations. During the search, the screen displays a progress bar, a scale of signal level and quality, as well as two lists of currently searched TV and radio channels (“TV” and “Radio”). When you finish searching for TV and radio channels, an installation complete message appears on your TV screen. The found TV and radio channels will be saved in the receiver's memory, after which the receiver will switch to the viewing mode.

Switch TV channels and radio stations

Switching TV channels and radio stations can be done in one of the following ways:
1. Dialing the number of the TV or radio channel using the numeric buttons and pressing the "OK" button.
2. Switching to the next / previous TV channel or radio station in the list is carried out by the “Channel” / “Channel” buttons on the remote control or by the “Channel” buttons on the front panel of the receiver.
3. Switching to the selected channel is carried out using the list of TV channels or radio stations. Switching between the modes of receiving TV channels and radio stations is carried out using the "TV / RADIO" button on the remote control.
4. To return to the previously viewed TV channel or radio station, press the "BACK" button.

When watching / listening to TV channels or radio stations, you can call up their list. To do this, click the "OK" button. There are two display options list of TV channels Tricolor TV or radio stations: one column (10 per page) and three columns (30 per page). To switch the options for displaying the list of TV channels, or radio stations Tricolor TV use the red F1 button (To exit the list of TV or radio channels, press the EXIT button).

One column- when displaying a list of TV channels or radio stations in one column, use the Channel / Channel buttons to move the cursor over the list. To switch to the TV channel or radio station highlighted by the cursor, press the "OK" button in. The "slider" in the bar to the right of the list indicates the position of the selected TV channel or radio station in the general list. It is also possible to scroll through the list of 10 TV or radio channels, which is carried out by pressing the "Loud" / "Loud" buttons.

Three columns- when displaying a list of TV channels or radio stations in three columns, to move the cursor through the list within the columns, use the Channel / Channel buttons. Use the Volume / Volume buttons to move between columns. To switch to the TV or radio channel on which the cursor is located, press the "OK" button. The "slider" in the bar to the right of the list indicates the position of the selected TV or radio channel in the general list.

Quickly sort the list of TV or for the sake of channels- while viewing the list of TV channels or radio stations (in one or three columns), it is possible to display them in alphabetical order. To do this, press the yellow button "F3". The selection of a TV channel or radio station in the sorted list is made in the same way as it was described for the complete list of TV or radio channels. To exit the list of TV channels or radio stations, press the "EXIT" button.

Choosing a favorite list- to view the favorite lists, press the "OK" button. A list of channels will be displayed in the window that opens. To view all the lists (TV, Radio, favorite lists) press the blue button "F4". To move the cursor through the lists, use the "Channel" / "Channel" buttons. Switching to the selected channel is carried out by pressing the "ok" button.

Broadcasters can broadcast TV and radio channels with several sound options, for example, in different languages. In order to select the required option, press the green button "F2". A menu window will appear, in which you can select the required sound track (sound channel) using the "Volume" / "Volume" buttons. If the broadcaster reports the corresponding audio language names, this list will display the names of the available audio languages. After completing the selection of the soundtrack channel, confirm your choice by pressing the "OK" button.

The info banner is displayed at the bottom of the screen when you change the TV or radio channel. While watching TV and radio channels, the information banner can be called up by pressing the red F1 button once. To exit the information banner display mode, press the EXIT button. The information banner displays the following information:

1. TV or radio channel number. 2. The name of the TV or radio channel. 3. The symbol of the presence of teletext on the TV channel. 4. The symbol for the presence of subtitles on the TV channel. 5. The symbol of the presence of several audio tracks on a TV or radio channel. 6. Symbol for a coded (paid) TV or radio channel. 7. TV or radio channel blocking symbol. 8. The start and end times of the current broadcast. 9. Signal quality scale. 10. The start and end times of the next transmission. 11. Signal strength scale. 12. The name of the next program. 13. The name of the current show. 14. The name of the favorite list.

TV guide provides information on the programs of each TV channel by date and time. You can schedule views based on this information. In the basic configuration, the functions described later in this section are available. The TV Guide is switched on by pressing the "TELEGUIDE" button on the remote control in the program viewing mode.

Use the Volume / Volume buttons to display the program guide by day of the week.

Use the Channel / Channel buttons to move the cursor to the program. When you hover the cursor over the program of interest, the start and end times, as well as a short description, will be displayed on the right side of the screen.

With the yellow button "F3" you can set a timer to switch the receiver to the selected gear... Before the timer is triggered, it is possible to reject the switch to the transmission set by the timer in the appeared information window, otherwise the switch will occur automatically. Information about all installed timers can be viewed in the main menu item "Applications" - "Timer".

Note! Do not turn off the power of the receiver or disconnect the USB flash drive while downloading data!

To update the receiver software via USB, follow these instructions:
1. On a USB flash drive in the root directory, write the firmware update download file.
2. Insert a USB flash drive into the USB port of the receiver.
3. Power off / on the receiver.
4. For some time (within 30 seconds) a message will appear on the TV screen that the software download process has started.
5. When the update process is complete, a message indicating that the software download is complete will appear on the TV screen.
6. When the message appears, remove the USB flash drive from the USB connector.
7. Turn off and on the power to the receiver.

The main thing GS 8306 menu called by pressing the "MENU" button on the remote control. To select an item in the main menu, use the "Volume" / "Volume" and "Channel" / "Channel" buttons, to confirm the selection - the "OK" button in, to exit the main menu - the "EXIT" button. The main menu and all its sub-sections are full-screen.

You can quickly find all TV and radio channels of Tricolor TV or update existing ones.

The following items are available to the user in this section of the menu: "Organize channels" and "Arrange favorites".

The "Channel organization" menu contains items for grouping programs according to certain criteria:
- "TV / Radio" - contains 2 lists: TV and Radio.
- "Transponder" - contains a list of transponders, TV and radio channels from which were found.

To select a group element, move the cursor to the name of the group element using the "Channel" / "Channel" buttons. Next, to open the lists of group members, click the "OK" button. Using the “Channel” / “Channel” buttons, select the item of interest in the list and press the “OK” button, after which a window with a list of TV and radio channels of this group will appear on the screen.

To the right of the list of TV or radio channels is a field with the parameters of the selected TV channel or radio station (satellite, service provider, frequency, polarization, stream rate (SR), FEC, scrambling). Scrambled TV and radio stations are marked with a $ symbol. It is also possible to delete, block TV channels and radio stations.

Editing TV channels and radio stations

Use the Channel / Channel buttons to move through the list of TV channels or radio stations. Press the OK button to highlight a TV channel or radio station. The highlighted TV or radio channel is marked with a tick. To deselect the selection, click OK again. There is a possibility of group operations for blocking and deleting TV channels or radio stations. Highlight several TV channels or radio stations using the "OK" button. To invert the selection of TV and radio channels for group operations, press the green button "F2".

Deleting

Select the TV channel / radio station or group of TV channels / radio stations you want to delete. Press the red F1 button. Using the buttons "Volume" / "Volume" select "Yes" and press "OK".

Blocking

Select the TV channels / radio stations you want to block and press the yellow "F3" button. Enter a valid PIN using the numeric buttons (default PIN is 0000). A special lock symbol in the form of a stylized lock will appear next to the TV or radio channel number. To watch / listen to blocked TV channels / radio stations, you need to enter the PIN code (by default, the PIN code is 0000). To unblock, select the blocked TV channel / radio station, press the yellow "F3" button and enter a valid PIN-code (the lock symbol in the form of a stylized padlock will disappear).

Renaming

To rename the selected TV or radio channel, press the blue "F4" button. Use the on-screen keyboard to enter a new name for the TV channel or radio station.

The "Arrange favorites" menu allows you to create favorite lists, add TV channels and radio stations to the lists according to certain parameters (filter), select, delete, rename, move and sort TV and radio channels alphabetically. Initially, there are 5 favorite lists: FAV1 - FAV5.

Moving through the favorite lists is carried out using the "Channel" / "Channel" buttons. To rename the selected list, press the blue "F4" HB button and use the on-screen keyboard to enter a new name. Press the red F1 button to delete the favorite list. Using the "Volume" / "Volume" buttons (select "Yes" and press the "OK" button. To cancel the request for deletion, select "No" and press the "OK" button or press the "EXIT" button. To add TV or radio channels select the required list in the list and press the "OK" button. From the list of TV and radio channels that appears, transfer the required TV and radio channels to the favorite list using the green "F2" button. To transfer all TV and radio channels, press the blue "F4" button To simplify the selection of TV channels / radio stations, you can use alphabetical sorting (press the yellow button "F3") or filter (press the red button "F1").

Using the filter, you can select TV or radio channels according to the following parameters: type (TV, Radio), coding. To filter TV or radio channels by any criterion, press the red button "Fl"; to reset the filtering parameters, press the green button "F2". To exit the filter without saving the settings made, press the yellow button "F3".

To move TV or radio channels in the favorite list, select a TV or radio channel and press the green button "F2". A special icon will appear in front of the TV or radio channel number. Select the new position of the TV or radio channel using the Channel / Channel buttons. Press the green F2 button again to store the TV or radio channel at the new position, or press the EXIT button to return the TV or radio channel to its original position. To remove TV and radio channels from the list, press the blue "F4" button.

In this menu item, you can make the settings corresponding to the connection of the receiver to your TV. Move the cursor with the "Channel" / "Channel" buttons to the line of the required setting. Switch installation options using the "Loud" / "Loud" buttons.

Video output

This item specifies the used connection interface. Video output is selectable from CVBS (default on initial power up) and HDMI.

The TV set reproduces the image and sound only if the type of physical connection of the receiver to the TV matches the type of interface set in the "Video output" column. Otherwise, there will be no picture and sound!

For connecting the GS 8306 receiver via the HDMI interface (being connected via the CVBS interface), the following sequence of steps must be observed:
1.
2. In the "Video Output" column, use the "Volume" button to select HDMI, then confirm the switch by selecting "Yes" and pressing the "OK" button.
3. The signal from the CVBS video input will turn off (the image on the screen will disappear).
4. Switch the TV to the selected video input (HDMI interface). After a short period of time (within 30 seconds) an image will appear on the TV screen.

Note! Connecting to a TV using HDMI is only possible if your TV supports 1080i. Otherwise, the signal will be automatically fed to the composite video input (CVBS interface).

To connect the receiver via the CVBS interface (being connected via the HDMI interface), the following sequence of steps must be followed:
1. Physically connect the RCA3-RCA3 and HDMI connection cables with one end to the receiver and the other end to the TV.
2. In the "Video output" column, use the "Volume" button to select CVBS, then confirm the switching by selecting "Yes" and pressing the "OK" button.
3. The signal from the HDMI video input is muted (the image on the screen disappears).
4. Switch the TV to the selected video input (CVBS interface). After a short period of time (within 30 seconds) an image will appear on the TV screen.

Note! Switching between connection interfaces in the "video output" column can be carried out by pressing the "Input signal" button on the remote control.

TV Standard

In this menu item, you can set the color coding standard for the composite video signal. Possible options: PAL, SECAM. Confirm your choice by clicking the "OK" button.

Note! The output signal of the SECAM receiver on some TV models may not be displayed correctly.

Audio out

In this item, you can set the audio signal that will be output from the audio outputs of the AUDIO L / R jacks. The type of audio channel is selected from Stereo, Mono. When the Mono type is selected, the sound will be output in monaural even if the program has stereo sound. In this case, the same monaural signal is output from both connectors / pins. The soundtrack of the TV or radio channel is output in stereo only if the TV or radio channel has a stereo soundtrack and Stereo is selected in this item.

Screen mode

Possible screen format options are 16: 9, 4: 3.
16:9 - in this case, a control signal is output, informing the TV that the image is in a wide format with an aspect ratio of 16: 9. A standard format picture on a widescreen TV will be displayed full screen with distorted aspect ratio.

4:3 - in this case, a control signal is output, informing the TV that the image is in a standard format with an aspect ratio of 4: 3. A wide format picture on a standard TV will be displayed in LETTER BOX mode: the picture will be framed with black bars at the top and bottom of the picture, but its aspect ratio will be 16: 9.

Display format

Possible options: "AS IS", "LETTER BOX", "PAN SCAN", "COMBINED". With the "AS IS" format, the image occupies the entire area of ​​the screen, but the distortion of the proportions occurs in the event of a discrepancy between the aspect ratio and the TV. LETTER BOX maintains the aspect ratio of the picture, but adds black bands on the screen (for a 4: 3 picture - left and right, for a 16: 9 picture - top and bottom). With the "PAN SCAN" format, the image is cropped from the left and right (for a 16: 9 image) or the top and bottom (for a 4: 3 image) while maintaining the aspect ratio. With the "COMBINED" format, distortion occurs, characteristic of "LETTER BOX" and "PAN SCAN", but attenuated by half.

Language setting

In this menu item, you can make the language settings of the menu, the soundtrack of the program and subtitles. Move the cursor with the "Channel" / "Channel" buttons to the line of the required setting. Switch installation options using the "Loud" / "Loud" buttons. Menu language- move the cursor to this line, if you want to change the language in which the menu will be displayed, select the menu language.

Audio language 1- move the cursor to this line and select the language. The language selected in this line will be used by the receiver automatically as the audio language for the program.

Audio language 2- move the cursor to this line and select the language. The language selected in this line will be used by the receiver automatically as the audio language for the program if the language specified in the Audio language 1 item is not among the audio languages ​​available on this TV or radio channel.

Note! The correctness of the automatic selection of the audio language also depends on the information transmitted on the air by the broadcaster. If the broadcaster does not transmit the correct information about the name of the audio language, then the automatically selected audio channel may not correspond to the settings you made. Subtitle language 1- the language set in this line will be automatically selected by the receiver as the program subtitle language (if the subtitles are transmitted by the broadcaster as part of the TV or radio channel signal). The selection is carried out in the same way as the selection of the Menu Language.

Subtitle language 2- the language set in this line will be automatically selected by the receiver as the program subtitle language (if the subtitles are transmitted by the broadcaster as part of a TV or radio channel signal), if the language specified in Subtitle 1 language is absent.

Transparency- in this section of the menu, you can set the transparency of the information banner, the window of the list of TV channels or radio stations, etc. The value varies from 0 to 50% in 10% increments. The values ​​are changed using the "Volume" / "Volume" buttons

Window display time- this section sets the time for displaying the information banner. The duration of the information banner can be changed from 3 to 10 seconds in 1 second increments. The values ​​are changed using the "Volume" / "Volume" buttons.

Scale display- Choosing the option "Yes" means that when the volume level is adjusted, the volume scale will be displayed on the screen. If you select "No", the volume scale will not be displayed on the screen. The choice of an option is carried out using the "Loud" / "Loud" buttons.

Timeout scale- This section sets the display time of the volume bar. The duration of the volume scale display can be changed from 3 to 10 seconds in 1 second increments. The values ​​are changed using the "Volume" / "Volume" buttons.

Show subtitles- The options are "Yes" and "No". After clicking the selection, confirm it by pressing the "OK" button.

Time setting

In this setting, you can set the time and date. Possible time mode options: automatic, manual.

Auto- to set the system time and date, the receiver will use the data transmitted by the broadcaster as part of the signal from the satellite.

Manual- the receiver will use the date and time set manually using the "Volume" / "Volume" buttons. To set the value in the New time field, use the number buttons.

Timezone- In this section, you can set the difference between your time zone and UTC (time on the Greenwich meridian). The values ​​are changed using the "Volume" / "Volume" buttons.

Blocking

This feature sets viewing restrictions and prevents unauthorized access to certain menu items on your receiver using a four-digit PIN. By default, at the factory, the PIN-code is assigned the value 0000. If the PIN-code is entered incorrectly, you will not be able to switch to the next mode. To change the PIN-code in the "Old PIN" column using the numeric buttons, you must enter a valid PIN-code, in the "New PIN" column - enter the new desired PIN-code. To confirm the operation, you need to re-enter the new PIN-code in the “PIN Confirmation” column.

Note! If you forget the PIN-code, you will have to contact the service department of the company where you purchased the receiver, so try to remember it.

Factory settings

In this menu item, you can restore all the settings to their default values, except for the main menu item "Settings" - "A / V-output settings" - "Video OUT". When resetting the receiver to factory settings, all information about tuned TV channels and radio stations, favorite lists, etc. will be lost. To load the factory settings, select "Yes" using the "Volume" / "Volume" buttons and press the "OK" button. After factory reset, the receiver will go to Step 1 of the Setup Wizard.

The GS 8306 receiver allows you to access programs broadcast using the DRE Crypt conditional access system.

Note! When switching to DRE-encoded TV channels, there may be a delay in decoding for a few seconds and the appearance of an information message "Scrambled channel (DRE) at this time."

In this menu item, you can get basic information about the smart card: serial number, software and hardware version.

Subscriptions- in this menu item you can get information about the subscriptions available on the card and the time of their validity.

Module- in this section of the menu you can get information about the conditional access module implemented in software based on the main Neotion NP6 processor.

System information- this section contains information about hardware and conditional access module. DRE Information This section contains information about the software and the conditional access module.

Help- This section of the menu contains a list of frequently asked questions regarding the cost of services, services provided by Tricolor TV, settings, malfunctions, etc.

Watching high quality TV channels with a clear picture of the picture is the best deal from one of the leading providers. To use its service, you need to purchase and install the Tricolor TV set, which allows you to receive broadcasts of the channels that are part of the ordered package.

Today the company offers several types of equipment for home viewing of your favorite TV programs.

Full HD Hardware E212

Thanks to this equipment, the user will be able to view more than 100 channels on TV in high quality and clear image format. The language menu is clear and accessible. The presence of a TV guide, teletext in Russian and other services makes the daily use of TV a real pleasure, because everything is convenient and accessible. The kit contains everything you need to install the system. The price of equipment calculated for viewing on one TV screen is 8,990 rubles.

The package includes:

• receiver GS E212;
• antenna with a size of 0.55 m;
• remote control;
• several batteries;
• video cable and audio;
• HDMI adapter;
• power adapter;
• special 6-meter cable;
• instructions for use;
• guarantee.

Receiver datasheet

The E212 receiver model was developed by General Satellite, according to the individual order of the Tricolor satellite TV operator. The receiver supports decoding of signal transmission in Full HD and EG-2 / MPEG-4 formats, such as DVB-S / DVB-S2, as well as multi-channel Dolby Digital 5.1 sound.

If we talk about the features of the successor itself, then it has several tuners for receiving satellite and simple broadcasting and a special port. Thanks to this, the receiver can be installed by placing it in any secluded corner of the interior or hiding it behind the plasma.

The included USB port allows you to play movies, music and quality pictures by simply plugging in a flash memory. The E212 model is equipped with an Internet outlet, which allows you to connect the distributor to a router, thereby providing broadcasting of channels to the tablet. Detailed information on setting up and using the receiver is contained in the instructions supplied with the equipment.

The receiver is controlled by the Linux operating system with a user-friendly interface of the latest generation of Stingray TV. The E212 model is considered the best achievement of GS among the provider's receivers; only the latest GS E501 model, designed for viewing on several TVs, can compete with it, since the set of equipment contains 2 receivers.

The core of the GS E212 is Lanthanum, a cryptographic microchip created by a company specializing in interactive television, Tricolor TV, which allows it to compete globally with the creators of satellite equipment. It is thanks to this detail that the operator can decode Full HD into an open broadcast signal from a satellite, as well as Dolby Digital 5.1 sound.

Full HD Multi-Point Kit

For the convenience of watching your favorite TV channels on several screens at the same time, the provider offers its subscribers the latest set of Tricolor TV with two receivers. Now you don't have to watch what one family member wants, now you can enjoy your favorite TV series at the same time as a football match.

The main receiver GS E501 provides signal reception and broadcasting of TV programs in DVB-S2 and DVB-S formats with a full range at 950-2 150 MHz and is equipped with several DVB-S2 tuners.

The cost of the system kit is 12,490 rubles.

Equipment set:

• Main router E501 and second sub receiver C591;
• Smart card;
• Dish for receiving a satellite signal;
• Circular special converter;
• Subscriber service agreement;
• Directory;
• Mounting kit;
• Cable 32 m;
• 19 m copper cable.