It is quite difficult to imagine a modern person without a digital drive. The flash drive is currently a successful portable object that stores a lot of useful information.
The advantage of a flash drive is that it does not take up much space and is accompanied by increased practicality. Even when dropped, it is not always damaged, as was the case with discs before.
Another advantage is that writing the desired content to it is not only faster, but also much easier.
Unfortunately, despite its unique practicality, it may happen that the flash drive stops functioning at some point.
Of course, you can peacefully "say goodbye" to a dead flash drive, go to a store where you can buy a new digital drive.
If it’s difficult for you to get rid of the usual storage medium so easily, then we recommend that you study the recommendations on how to restore a “dead” Transcend flash drive.
Recovery process
Before making minor repairs to a damaged Transcend flash drive, it is important to establish the reason why it failed.
Such a diagnosis can be compared with the treatment of a patient. The doctor also initially examines the patient, establishes a diagnosis, identifies the cause of the pathology, and only after that prescribes treatment.
We also recommend that you "treat" your affected digital media. The program for recovering a Transcend flash drive, which can be easily downloaded using the offers on the network, will help quite effectively with this.
However, it is still useful to initially establish the cause of the failure, due to which you have to "scoop" advisory information.
Causes of failure
In most cases, you have to consider the recovery of a Transcend flash drive due to a banal software failure that users have to deal with quite often.
To confirm that, indeed, a software failure presented such an unpleasant surprise, some tricks allow.
Insert your drive into the USB port and see what happens next. If all your attempts to open the media are in vain, but the computer sees the Transend flash drive, then it is likely that it has undergone a software failure.
You can also suspect this if, when you connect the media via the USB connector, you hear a characteristic sound signal, but no visible changes appear on the screen, including you will not find your media when you start the "Computer" window.
Also, a software failure is indicated by a factor when the PC sees a flash drive, but not all, but only part of its disk space.
Of course, if you have found confirming "symptoms" of a software failure, which requires the restoration of the Transend flash drive, you do not need to fall into despair, feverishly remember what could be the reason for such a nuisance.
Of course, you could also provoke the failure of a digital media if you neglected the recommendations on how to properly remove the drive from the USB connector.
The reason for the failure may be the fall of the device, strong mechanical squeezing. There may also be reasons that are completely independent of the actions of the user.
Troubleshooting
Those who have established themselves in the idea that the drive has stopped responding to any actions want to find a program for recovering a flash drive.
Indeed, there is a utility for recovering a Transcend flash drive, it is not so difficult to find, download and install it on a computer.
One of the programs for recovering a flash drive
However, initially it is important to make sure that the digital drive is still “dead”. Sometimes it happens that it does not respond on one PC, but it works fine on other computer equipment.
Often a software failure is found on the PC itself, when, for example, the drivers “flew”.
You can also try to disconnect all peripheral devices from the USB connectors, and connect only a USB flash drive. Even such a simple move sometimes makes it easy to fix the problem.
If all your attempts are in vain, we recommend that you inspect your digital drive from all sides. It is useful to pay attention to all the chips, cracks that you find on the case.
It will not be superfluous to look inside the part that connects to the USB connector. Sometimes such a visual inspection is enough to reveal poor internal contact.
Do not be afraid to carefully open the carrier case and inspect it for integrity inside. It is useful to carry out a thorough visual inspection of its internal contents.
You can also try to fix a bad contact yourself, but only if you have special tools for this. If there are none, it is unlikely that you will be able to eliminate even the identified problems.
Only after you have made sure that mechanical damage is excluded, you can proceed to the next step, after which the digital media can be restored.
Of course, in this case, you will definitely need a program to restore the Transend flash drive.
To correctly restore a flash drive, it is important to first clarify the type of memory installed on the media, its ID, firmware version, controller ID and other technical details.
In this case, you will not be able to do without the help of a special Chip Genius utility. With such a utility, you will not only receive information quickly, but it will be accurately presented without errors.
Based on the information received, you can start searching, the purpose of which is a program to restore your flash drive.
The ideal solution to the problem you have indicated is not even a recovery utility, but the JetFlash Online Recovery utility program.
This option is suitable for those users whose computer is provided with constant and reliable access to the Internet.
Do not even tune in to a time-consuming process, your such expectations will be in vain. Immediately after launching such a service program, as well as connecting a digital "dead" drive to the USB connector, the "resuscitation" process will start automatically.
You just have to patiently wait for the process to complete. The only thing you have to do is click on the "Yes" button, confirming your readiness to grant the rights to work with the flash drive to the program itself.
After the completion of the program, the program will inform you about it. Now unplug the flash drive and then plug it back in. If the "resuscitation" process was effective, you will find instantly that your digital drive "came to life". You can again copy, record and other functional user manipulations on it.
If the flash drive has not “come to life”, you will have to say goodbye to it, and get yourself a new digital “assistant”.
So, you were able to make sure that the process of digital media recovery is not complicated. However, such a process needs increased attention and responsibility for every step taken.
Do you have an inoperable USB flash drive or other media and you are wondering which program to choose for recovery?
We have reviewed the most popular utilities. Which of the above programs is right for you and will restore a flash drive with a 100% guarantee?
A one-of-a-kind program will help you pull out all the data Hetman Partition Recovery. It is loved by both beginners and pros for its convenience, speed and advanced data recovery algorithm. Your files will be found and copied even when the FS of the media is no longer available or it is damaged.
JetFlash Recovery Tool is a proprietary utility that has the most simple interface and support for working with Transcend, JetFlash and A-DATA drives. Management of only two buttons, obviously you will like it. Do not forget that the cleared data cannot be restored, so saving information from a USB flash drive will not be superfluous.
If you need to always have a universal program with you, which is convenient to use both on your home computer and outside it, we recommend D-Soft Flash Doctor, its platform does not require pre-installation, it starts instantly on any PC. The software is suitable for repair, unlock,
restore the volume of the flash drive and its performance.
If you need to recover SD cards, we advise you to download F-Recovery SD, which has an effective set of simple options for working with damaged flash drives from digital cameras and other portable devices. From the point of view of a professional approach to Flash drives, it will be interesting to use the Flash Memory Toolkit, the application contains a whole range of additional functionality that can test flash drives, in addition, the program works with any version of Microsoft's OS.
To recognize the maximum number of different types of Flash Drives, among the above utilities, as well as quickly reanimate the performance of drives, the USB Disk Storage Format Tool formatting and recovery utility, which has a very clear and convenient interface, can be used. The USB Disk Storage flash drive repair program will be able to quickly restore data from damaged hard disk partitions even if flash drive firmware problems are detected.
If no flash drive recovery program has helped, we recommend checking the status of the memory controller using the ChipGenius utility. The program works with USB, micro sd, SD, SDHC and USB-Mpz players from Kingston, Silicon Power, Transcend, Adata, PQI. Further actions to correct errors, restore lost data are only advisable if
flash drive is defined in Chip Genius.
There are many possible reasons why Flash drive may undergo a certain failure in its work and stop being read in Windows. We will not consider them all, but will immediately proceed to the solution of the question posed.
The situation might look like this:
You want to brighten up your Friday night by downloading an episode of your favorite series to your flash drive, but you suddenly encounter a message saying “Please connect the device to removable drive F:”.
Can this be fixed? Easily! In this article, we will look at 2 effective ways to restore the visibility of a flash drive in the list of explorer disks.
JetFlash Online Recovery
If your Transcend Flash Drive has been damaged in some way and no longer functions properly, please use the application specially designed for such cases. JetFlash Online Recovery.
This program is primarily aimed at solving a situation in which the disk is no longer displayed in the list of connected devices.
Use the simple below instruction, which will allow you to quickly fix the problem with the Transcend Flash Drive.
- Download and install the JetFlash Online Recovery application from the official website of the developers.
- Connect the flash drive to a computer with Windows operating system and run the program.
- First, you will be asked to confirm the selection of the disk by specifying its size. Click OK. Next, the application will start the scanning operation.
- You will be presented with two available options:
1) Repair disk and erase all data.
2) Repair disk and keep existing data.
Remember that in order to fully fix the problem, you will need to select the first option, which involves completely formatting the device. - Wait for the formatting process to complete and press the key Exit.
Reconnect the flash drive and make sure the device is working properly. If you did everything right, Windows Explorer will see it again and be able to read the data. At the same time, no matter how much you would like to avoid this, the documents, music and video files installed on the disk will inevitably disappear.
Recovering deleted files from a flash drive
Starus Fat Recovery is a unique application that can recover a document of any format from a damaged device running the FAT file system.
The intuitive Russian-language interface of the program will not make you spend hours studying tutorials and save you from searching for expensive and often low-skilled applications that can harm your computer.
1. Launch Starus FAT Recovery. You will be greeted File Recovery Wizard, autorun of which can be disabled in the future, if desired.
2. Select the drive or logical partition you want to scan.
3. Select scan type:
Quick scan- conducts a lightning-fast check of the HDD and identifies the latest files installed on it.
Complete Analysis- deep scanning of the device, allowing you to detect even the oldest documents. This check can take significantly longer than the quick check.
4. A convenient preview function allows you to carefully examine all the files found and decide which ones you need to recover.
5. Highlight the files you want to check in, right-click on any of them, and click Restore.
Note!
Never export data to the same drive you are restoring it from. This can lead to irreversible damage to documents and the impossibility of further work with them.
