The question of how to combine two disks into one is one of the most frequently asked among computer users. This can be useful in many situations, including even moments associated with setting a single file system for all partitions, converting the GPT or RAW format that the operating system may not accept, installing software that requires a lot of disk space, etc. the user can be offered two main methods of combining, which will be further discussed in as much detail as possible. The proposed solutions work equally well when performing such actions with logical partitions, and when working with RAID arrays, when two or more independent hard drives are installed on the computer.
Benefits of combining hard drives or partitions
It goes without saying that the first and main factor influencing the adoption of a positive decision in favor of merging partitions is increasing the available disk space on one disk, which is extremely necessary when installing some programs.
On the other hand, as already mentioned, if different types of file systems are installed on disks or partitions, it is quite common to observe problems with the installation of certain types of software. Bringing them, so to speak, to a common denominator, eliminates the problem entirely. Finally, if the system has unreadable RAW partitions or GPT format for hard drives larger than 2 TB, which the operating system may not accept, such a tool is simply irreplaceable.
Combining options
Now a few words about how to merge two disks into one in Windows 7 and above. First, you need to decide in what way the sections will be merged. First of all, we can highlight the ways of combining with the loss of information or with its preservation. Second, the use of standard system tools or third-party software.
It should be said right away that the solution to the question of how to combine two disks into one using the built-in Windows toolkit for the safety of data that was originally located in one of the partitions does not imply (this is not provided at all). Therefore, before doing such things, all the information from the partition to be deleted (and it will indeed be deleted, and only then attached to the main disk or partition) must first be transferred to another partition or to removable media. As it is already clear, there is no need to talk about the performance of the installed programs. When solving the problem of how to combine two disks into one, but so that both the information is preserved and the applications work, it is necessary to use additional third-party tools. They will be discussed separately.
How to combine two disks into one in Windows 7 and higher versions by standard means?
To begin with, let's consider the system's own facilities. This is the disk management section. It can be accessed through the administration menu, but it's easier to use the Run console, in which you need to write the diskmgmt.msc line.
Here you select the partition at the expense of which you want to merge, and through the RMB menu, the item for deleting the volume is called. The system will immediately warn you that all information on the selected disk will be deleted. We agree.
We repeat the same operation, but for the section. After that, the so-called unallocated area will appear.
Now you need to use the RMB on the partition to which the attachment will be made, and select the volume expansion line.
At the stage of selecting disks, most likely, free attachable space will be immediately added to the list. If this does not happen, you should use the add button yourself. After that, the continue button is pressed, and in the next window - the end. If you look at the state of the disks and partitions at the end of the operation, you can see the increase in space on one of the partitions at the expense of the other.
How to combine two disks into one using third-party programs
To manage disks and partitions, when you need to perform a merge with preservation of data, you can use third-party utilities, which look much more powerful than the system's own tools. This includes software packages like AOMEI's Partition Assistant, Acronis Disk Director, EaseUS's Partition Master, and many others.
Let's look at the merge process based on the last mentioned utility. For example, we need to merge drive E and drive F, but so that after that there is only one partition E. In the main window of the Partition Manager section, use the Merge button, check the indicated disks (partitions) and click the "OK" button. After checking the merge, the process will be in the pending status. Click the Apply button and confirm the action. After that, the merging process will begin.
When it finishes, only one section (E) will be visible in Disk Management. Explorer will display two hard drives in one hard drive or partition. Only the F drive in the E section will be shown as a local directory (Local Disk F) with all the information that was previously present on it.
Brief conclusions
As a result, it can be noted that if the user needs a quick merge, and there is no critical information on the attached disk or partition, you can use the system tools. If data storage is mandatory, you will need third-party programs. And further. Please note that if there is a second operating system on the combined disks in the attached partition, it will not be possible to start it.
Hello to all! Today we will consider such a topic, how to connect two computers together... And I will show the way 2. So let's get started.
Let's consider 2 ways:
1. How to connect 2 computers using a Wi-Fi router or Switch.
2. Connect with wire.
I will be connecting my laptop (with Windows 8.1 operating system) and my computer (with Windows 7 operating system).
1. A way to connect two computers using, well, or a switch.
Whoever has a router or a switch, it is 2 times easier to connect two computers. Even if you have a Wi-Fi hotspot, whether you connected the computer via a cable or wirelessly, Wi-Fi does not matter. This is the same thing, the main thing is that the subnet is the same (for example 192.168. 1 .*)
First you need to check that the workgroup is the same, otherwise the second computer will not see the first one. We go to the control panel and select the system.
And we change the name. The main thing is that this name is the same on all computers!
So, to connect computers, go to the control panel and select the homegroup.
Some people think that wired and Wi-Fi are two different things. Therefore, to destroy the myth how to connect two computers to each other via wifi, I decided to connect via Wi-Fi and do the same.
Let's go in order.
We provide access to the necessary files.
Everyone, you have joined the group.
Click to change advanced sharing options.
And we select all the items like mine:
Everything. Now we check. We create a folder, for example, I created it on the laptop desktop (which are connected via wi-fi).
We write everything, or a specific user, then we can put what is allowed for him and click share.
In the advanced setting, check the box and press ok. If you need extended rights, then the extended button.
Now we check. In the computer, I press start, I go to the network. And I see my laptop (I didn't bother).
We go in and see the folder that I created in the laptop.
2 way to connect two computers by wire
Without a router, you can only connect 2 computers ... Of course, if you add a network card to each computer, then more, but this is already some kind of tin ... We will connect two computers using a cable.
In general, we connect the cable to the 2m computer, to the network card. Next, go to the Network and Sharing Center - change adapter parameters. On a local network connection, select the property. We find the protocol version 4 and the same property. Our task is to leave the same subnet, and the computer address can be any. On one computer, I put the address 192.168.1.1, and on the other 192.168.1.2. The standard mask is 255.255.255.0.
Click ok, on 2 computers and go to the network to check.
We see the result.
Also, if it does not work out, do the settings from the 1st method. I did right after them, therefore they are workers.
Check if there is a firewall or firewall blocking in your antivirus (if any).
And also when you go to the network, a sign may appear at the top, whether to allow files on the shared network. Click yes.
Merging two or more photos into a single image is a rather popular function that is used in photo editors when processing pictures. You can connect images in Photoshop, but this program is quite difficult to understand, in addition, it is demanding on computer resources.
If you need to combine photos on a weak computer or even on a mobile device, numerous online editors will come to the rescue.
Today we will tell you about the most functional sites that will help you combine two photos. Stitching is useful when you need to create a single panoramic photo from several pictures. The resources considered are completely in Russian, so ordinary users will also be able to deal with them.
Method 1: IMGonline
An online photo editor will delight users with its simplicity. You just need to upload photos to the site and indicate the parameters of their combination. The imposition of one picture on another will occur automatically, the user only has to download the result to a computer.
If it is necessary to combine several photos, then initially we glue two pictures, then we attach the third photo to the result, and so on.
There are many additional tools on the site that will help you get the desired image at your disposal without having to install and understand the functionality of Photoshop. The main advantage of the resource is that all processing takes place automatically without user intervention, even with settings "Default" a decent result is obtained.
Method 2: Croper
Another resource to help you connect one picture to another in just a few clicks. The advantages of the resource include a completely Russian-language interface and the presence of additional functions that will help to carry out post-processing after gluing.
The site requires stable access to the network, especially if you are working with high quality photos.
Method 3: Create Collage
Unlike previous resources, the site can glue up to 6 photos at the same time. Create Collage works quickly and offers users many interesting templates for gluing.
The main drawback is the lack of advanced features. If you need to further process the photo after gluing, you will have to upload it to a third-party resource.
Combining photos takes a few seconds, the time varies depending on the size of the pictures with which you are working.
We have talked about the most convenient sites for connecting images. What resource to work with depends only on your wishes and preferences. If you just need to combine two or more pictures without further processing, the Create Collage site will be an excellent choice.
Move the second photo to the previously opened one.
You can read more about joining photos in.
Then, using the Move Tool, set the desired location of the photos relative to each other. It is necessary to make sure that one photo overlaps the other, and a smooth transition will be mounted in the place of overlap. For convenience, you can temporarily reduce the opacity of images in Layer panels it is also a good idea to put guides on the edges of the overlap.
Now we will determine which photo will be on top, and if necessary change location layers in the Layers Panel. I have a Twitter image on top.
Then set the opacity of the image layers back to one hundred percent.
And now, let's move on to creating a smooth transition between photos, in this example we will do it using a layer mask and applying a black and white gradient.
Add to the layer with the top photo layer mask by clicking on the corresponding icon at the bottom of the palette, while the colors in the color palette automatically changed to a black foreground color and a white background color, in Layer panels a mask icon will appear on the corresponding layer. Then open the Gradient Tool in the Tool Palette. In the upper left corner of the Photoshop working window, click on the triangle to open the gradient palette, and select the very first one, which has the name "From the main color to the background". Then we draw a line from one guide to another in the direction shown in the figure.
In order to draw the gradient line strictly horizontally (or, for other cases, strictly vertically), hold down the Shift key.
As a result, we will get a smooth transition to transparency of the right edge of the upper image, which gives the effect of a smooth transition between the two photos.
On the mask icon in the Layers Panel, we will see the following changes, black color shows full transparency, and white, on the contrary, full opacity of the image to which the layer mask is applied.
That, in fact, is all, the task is completed!
