Weak sound on a smartphone how to increase. Entering the menu using third-party software

The main disadvantage of all devices on the Android platform is the low volume of the phone. Moreover, it manifests itself not only when listening to music or watching a video, but also when talking with other interlocutors. Fortunately, there are several ways to change the sound of the device and make it stay the same. To do this, you do not need special knowledge, you just need to be able to change device settings and install applications.

We have collected for you some tips explaining how to increase the volume on android without damaging the performance of the phone.

Often, the main problems with sound begin after the user pulls out the headphones from the device. Quite often, listening to music or the radio will cause your phone to optimize the sound when talking for a comfortable sound in headphones ... but it often forgets to return the settings back. In order to avoid such problems, carry out the initial setup.

An item in the audio settings called "Auto-adjust ringer volume" is responsible for adjusting the volume. If you turn it off, you will get stable settings that will definitely not change without your knowledge. Immediately set the mode to "Pocket", which will make the phone play at maximum volume.

Some manufacturers specifically limit the sound volume at the software level. At the same time, the hardware component allows the speakers to sound louder. Such restrictions are most often found in devices intended for the European market. This loophole can be used to remove restrictions. To do this, reset the phone to factory settings and set the region to North America on the first start.

A simpler and more accessible way for inexperienced users is to install special applications that allow you to change settings with switches and sliders. Fine-tuning the sound in this case will allow you to optimize the sound of the device without additional necessary knowledge. At the same time, programs can bypass factory restrictions, giving you full access to the potential of the device.

Of these applications, I would like to recommend the Volume Control program. This program allows you to change the sound without restrictions, supports different profiles and allows you to save all settings. For lovers of finer sound tuning, the Volume + application is more suitable. It gives advanced users the tools to set up their headphones, Bluetooth headset, and the phone itself. In this case, you can use the built-in equalizer of the phone.

For more advanced users, such a dangerous way is more suitable, how to increase the volume on android through the engineering menu.

The main danger of this method is that the user gets direct access to the fine settings of the phone, an illiterate change of which can lead to the inoperability of a separate module or the entire device as a whole.

The menu is called through a special command. Most often it is *#*#3646633#*#*, in some cases *#15963#* or *#*#4636#*#*. It is enough to type them on the keyboard (in some cases, press the call button) and you will find yourself in the engineering menu. If the codes don't work, check the correct code for your version of Android. If you have a phone based on MediaTek chipsets, then you should use the Mobileuncle MTK Tools program.

In the interface that opens, you must select the Engineer Mode item and immediately after - Engineer Mode (MKT). Next, since you are interested in sound, select "Audio". All sound settings will open before you, you can experiment and customize the sound for yourself.

Basic settings for each mode:

• SPH - allows you to adjust the sound when talking with another subscriber;
• MIC - increases or decreases the sensitivity level of the phone's microphone;
• RING - responsible for the volume of the call;
• MEDIA - determines the sound level when playing content, also used for games and applications.

By changing these parameters, you can adjust the sound to suit you, but do not overdo it, otherwise you will get a wheezing phone, the sound of which will be worse than on old tape recorders, even though it will play loudly. The optimal indicators are 150-200, in some cases 200 will be a lot.

Watch the video: How to increase the volume on android

Mobile devices running Android have firmly entered our lives, having managed to partially replace the functionality of desktop computers. Modern smartphones allow you to browse the Internet, work with graphics and text files, listen to music, communicate and much more. In terms of hardware characteristics, however, phones are inferior to computers and laptops, for example, in smartphones, the speakers are usually weaker than in the same laptops, and sound is a very important component for any communication device.

Volume up on Android

Normal volume is needed not only for comfortable listening to music and watching movies. Too weak a sound can lead to the fact that in a noisy place the user simply does not hear the call. Fortunately, most modern smartphones have the possibility of flexible customization using special built-in and third-party tools. From our short guide, you will learn how to increase the volume on Android and what it takes.

Standard settings

Before you rush to use advanced tools, take a look at your device settings. Many phones have several customizable sound profiles, it is possible that the speakers on your device do not work at all due to the fact that the wrong profile is simply selected in the settings. Activating another profile is the easiest and most affordable way to make the sound on Android louder.

The setting you need on different models of smartphones may be called differently, we have it “Melodies and notifications”. Usually the main profile is set by default, let's choose "Street" instead.

That's it, the sound will immediately become a little louder. Profiles may be called something different on your phone, often they are presented in the form of modes, for example, "Movie", "Music", etc. Note, however, that in any case, the maximum volume will be limited by the system settings. To increase the sound on your Android phone more than standard tools allow, you need to go around workarounds.

Engineering menu

An order of magnitude more opportunities in terms of increasing the volume on Android gives - a hidden part of the device settings, which can be accessed by dialing a special code on the phone. The table below shows the codes for entering the engineering menu on devices from different manufacturers. The specified combinations are entered in the telephone dialer.

You can also get into hidden settings using the free Engineer Mode MTK app.

Let's see how to increase the volume on Android through the engineering menu. In it you need to find the “Audio” section, where all the necessary parameters are located, namely Normal Mode and Headset Mode.

The first mode is active when a headset is not connected to the smartphone, the second one is activated when headphones or speakers are connected. Open the Normal Mode settings to start and set the Type option to Media, and the Value and Max. level ”(Max Vol) set values ​​\u200b\u200bhigher than the default ones. For example, if your Value is 32 and Max Vol is 128, try setting the first to 50 and the second to 140.

Apply the new settings by clicking both Set buttons. The same manipulations must be performed for the next levels (Level 1, Level 2, etc.), each time slightly increasing the values ​​upwards and not forgetting to apply the new settings. It is not recommended to set values ​​that exceed the allowable values, as this may reduce the sound quality. Please also note that the "Type" option, in addition to the Media mode, which is responsible for the volume when playing multimedia content, supports other parameters, namely:

• Sip - volume for Internet calls;
• Mic - microphone sensitivity;
• Sph - speaker volume;
• Ring - incoming call volume;
• FMR - FM radio volume.

If necessary, you can adjust these settings in the same way. The exception is the Sid parameter, changing the values ​​of which can lead to the appearance of an echo effect during a conversation. As for the Headset Mode, which in Android smartphones is responsible for the volume when a headset is connected, the procedure for setting it up is practically no different from the procedure for setting the Normal Mode. The same is true with the LoudSpeaker Mode, which allows you to increase the volume of the conversational speaker on Android.

Before making changes to hidden settings, it is recommended to write down the old values ​​​​of system parameters, this will allow you to recover in case of failure.

Best Sound Amplifier Apps for Android

Changing settings through the built-in engineering menu is not the only working way to adjust the sound in phones. How else to increase the volume of the speaker on Android? With the help of special volume booster applications, which can be found on Google Play.

Volume Booster by GOODEV

Perhaps the best program that allows you to really amplify the sound on your Android phone. Differs in simplicity and a minimum number of parameters. After installation, you need to go to the general settings and enable, if disabled, the options "Show volume control" (showing the volume control) and Non-uniform boost (non-standard gain). Volume Booster has its limitations. The application does not work on most devices running Android below version 4.3, it can only be used to amplify the sound in games and when playing media.

Amplifier

Sound amplifier program for Android from the developer FeniKsenia. This is a simple, convenient and effective application that can increase the volume of the speakers bypassing system restrictions. Adjustment is carried out by dragging the two sliders "Volume" and "Gain". Like Volume Booster, Volume Booster is designed to increase the volume when playing multimedia content.

Loud Volume Booster for Speakers

In search of an answer to the question of how to boost the sound on Android, you should try another application from FeniKsenia called Loud Volume Booster for Speakers. It is very similar to "Sound Booster", but it can be used not only to increase the volume when playing media, but also to increase the sound level in game processes, when receiving system notifications, and so on. The volume in Loud Volume Booster for Speakers is also adjusted by dragging the two sliders.

Outcome

Well, we hope that after reading this article it will not be difficult for you to increase the volume on your Android device. For novice users, difficulties may arise only when working with the engineering menu. In any case, try to stick to the rule of the golden mean and do not increase the volume to the limit values, otherwise you risk making the smartphone's speakers unusable.

When trying to find a way to increase the volume of the speaker on Android, you will surely come to this page.

And rest assured, here you will find this method, and not even one.

In this case, intuition or the “trial and error” method will help you choose the best option from the proposed set of methods.

In any case, you will be satisfied with the result, but for now let's proceed to consider the problem.

What you should pay attention to?

Sound problems, one way or another, can occur with any device - both budget and quite expensive.

However, the ways to solve these problems are almost identical, since the software part of systems of one generation will always be similar, even with some differences.

Accordingly, the minimum differences in the configuration process will be associated to a greater extent with the features of the version of the operating system.

As for the sound features of the device itself, it is worth noting that the differences in the sound of an expensive and budget device will still be noticeable.

And not all software tools are able to fix the sound quality of a speaker or based on Android.

Thus, if the sound reproduced by such a speaker is increased, hardware problems may arise in contrast to this.

For example, the speaker will begin to produce sound at unauthorized frequencies and, as a result, extraneous noise will appear during the sound, including squeaks, wheezing, crackling and, possibly, pops.

Therefore, in the process of selecting settings, keep in mind that such problems may arise and try not to make mistakes in order to maintain the device's performance.

The standard way to solve a problem

Before moving on to the tightest controls on Android, let's look at the rules for standard volume control.

Note that the volume can be adjusted both globally for all system sounds and for individual applications, which is especially important when you seem to have set the sound to full volume, but in the media player the composition is played quietly.

In this situation, everything can be solved mechanically, i.e. using the volume rocker key.

You need to use it not when the desktop is displayed on the screen, but when the specified application is running.

For example, in the conversation mode, the volume will be adjusted specifically for communication, and when viewing the gallery - the volume of the video being played.

Using this method, most users come to the conclusion that in some situations the sound of the smartphone turns out to be excessive, and somewhere insufficient.

The right way to solve a problem

The second way to adjust the sound involves the use of other standard tools - software.

Their functionality is limited to just a few categories that adjust the sound volume:

• calls;
• talk;
• system sounds;
• media files.

It only takes a few steps to get to these adjustments. The first step is to find a system app called "Settings".

Its label looks like a gear, regardless of the applied theme.

It is inside it that the hinges are hidden, thanks to which you can fine-tune the sound of each of the above categories.

It should be noted that the visibility of such adjustment leaves much to be desired, despite the modern interface.

However, after playing around with the hinges, using short and long taps (with a hold), it's not hard to see how the app works.

At the same time, if these settings are set to the maximum, this will only be a border that the device manufacturer or the developer of proprietary firmware on the base does not allow to violate, and in order to violate them, you need to use other methods.

Rice. 2 - Volume control window

Programmatic way to solve the problem

When the built-in capabilities of the gadget seem not enough, the first reaction of the user is to use third-party software tools. There are a great many of them in.

But before you hammer in his search "Volume Booster", it is worth paying attention to the fact that not all software tools give complete freedom of action.

Some applications have a rather narrow functionality and simply maximize the hardware power of speakers and microphones, which is completely wrong, and a similar result can be achieved with hidden built-in tools, which will be discussed later.

In the meantime, let's pay attention to the fact that with the help of one application, you can not only improve the sound, but also improve the quality of the reproduced sound thanks to the special software tricks used.

Therefore, it would be more correct to look not for a volume increaser, but for something like an audio center or utility for.

One of the most successful for Android can be considered Dolby Atmos.

It has an intuitive interface with which will allow you not only to increase the volume to the maximum, but also to customize the sound to your own taste.

Tip: look for similar programs in the category of system applications. Among them there are both paid and free versions for every taste.

Rice. 3 - Sound settings app

Hidden built-in tools

If you do not want to pay for volume control, you can use the standard settings, but hidden from the average user.

They are available in the so-called developer mode or "Engineer Mode". Unfortunately, it is not available for all Android-based firmware and access to it is protected.

Each gadget manufacturer decides for himself whether to use his own access code or a standard one, and possibly completely block the user's access to these settings.

To find out, you need to go to dialing mode.

To do this, click on the icon with the handset (y is usually located in the lower left corner of the desktop), and in the window that appears, select the icon with the keys labeled "Phone".

After that, you can enter the code corresponding to the brand of the manufacturer from the following table:

The column headings show gadget brands, and the row headings show developer mode access codes that are compatible with them.

Not all brands are represented in this table, just because they use individual access codes, for example:

• *#*#2237332846633#*#* for Acer;
• *#*#2846579#*#* and *#*#14789632#*#*

How to increase the volume, sound on Android in 1 minute!

Increase the standard volume on an android smartphone

Probably, many smartphone owners have faced the volume problem. For example, two things did not suit me. The first is a quiet speaker sound when an incoming call, and the second is a very loud sound in the headphones when an incoming call.

A little about how Android controls volume

If no headset is connected to your gadget (headphones, hands-free, etc.), then the volume settings will be the same, and as soon as you connect the headset, the settings will be different. For a general understanding, I will give a few examples.

Example 1 You listen to music on your phone, turn on the loud speaker at full volume, and when you connect a headset to it and turn on the loud speaker again, the volume may differ (it may be louder or lower, depending on which phone model or firmware version).

Example 2 You are watching a movie in headphones, the volume (meaning the volume of multimedia) is set to 40% and then after a while you have an incoming call, then the volume in the headphones will change to the general volume, in which case you can get a powerful sonic shock to the ears. Believe me, I have been blown up from the couch more than once in such cases, the fact is that the programmers have poorly adjusted the volume modes.

Example 3 You are on a phone call and need to switch to speakerphone mode, and you notice that the speaker is not as loud (or vice versa) as when listening to music; or the partner began to hear you badly, this is because in different modes the microphone may have different sensitivity. Also, when you connect a headset in the same situation and turn on the speakerphone mode, the settings are different again. This is how Android manages volume.

We learn the theory of the engineering menu

So let's look at what and how can be done if you play a little trick on the "Engineering Menu".

Before making any changes, we recommend that you read the article in full, and comprehend, and then experiment. Also take a piece of paper and write down all the default values ​​in case something goes wrong. You can start the engineering menu using the telephone dialing: we prescribe the following combinations on it (Fig. 1):

picture 1

*#*#54298#*#* or *#*#3646633#*#* or *#*#83781#*#* - smartphones based on the MTK processor

*#*#8255#*#* or *#*#4636#*#* – Samsung smartphones

*#*#3424#*#* or *#*#4636#*#* or *#*#8255#*#* – HTC smartphones

*#*#7378423#*#* - Sony smartphones

*#*#3646633#*#* – Fly, Alcatel, Philips smartphones

*#*#2846579#*#* – Huawei smartphones

Congratulations, you have entered the engineering menu (Fig. 2). Keep in mind that the menu on different phones may differ slightly in structure. We find the section "Audio" and go into it. After entering, we see a bunch of unknown lines (modes) (Fig. 3). Here's what these modes mean in Android:

figure 2 figure 3

— normal mode(settings section in normal or normal mode) – this mode is active when nothing is connected to the smartphone;

— Headset mode(headset mode) - this mode is activated after connecting headphones or external speakers;

— Loud Speaker Mode(loudspeaker mode) - it is activated when nothing is connected to the smart, and you turn on the speakerphone while talking on the phone;

— Headset_LoudSpeaker Mode(loudspeaker mode when a headset is connected) - this mode is activated when headphones or external speakers are connected to the smart phone, and you turn on the speakerphone while talking on the phone;

— Speech enhancement(Talking mode) - this mode is activated in the normal talking mode on the phone, and nothing is connected to it (headset, external speakers) and the speakerphone is not turned on.

It’s better not to poke your nose into the last three sections:

— debug info- it is not clear why - info on the backup of information or its debugging;

— Speech logger- I didn’t fully understand, most likely, logging during negotiations or recording chatter. If you check the box next to "Enable speech log", then after the end of the phone call, the corresponding files are created in the root directory of the memory card. Their name and structure takes the following form: Wed_Jun_2014__07_02_23.vm (Wednesday_July_2014__time07_02_23.vm).

What these files serve for and how they can be useful to us is not clear. The directory /sdcard/VOIP_DebugInfo (which is the location for storing files with information on the backup) is not automatically created, if you create it manually, then after the conversation it will remain empty.

— audio logger- good sound recording software that supports quick search, playback and saving.

If you approach these modes wisely, you can adjust the volume of Android smartphones or tablets the way you want. When entering any of the modes, various volume settings (Type) will become available to your gaze. Here is a list of the main settings you need to know (Fig. 4):

figure 4

—Sip– settings for Internet calls;

— Mic– microphone sensitivity settings;

— Sph- settings for the conversational speaker (the one that is applied to the ears);

— Sph2- settings for the second conversational speaker (I don’t have it);

— sid- we skip, when you change these parameters during negotiations on your smartphone or tablet, you can hear yourself instead of the interlocutor;

— media– setting the multimedia volume level;

— ring– setting the volume level of the incoming call;

— FMR– FM radio volume settings.

Further, under the item for selecting settings, we have a list of volume levels (Level) (Fig. 5). For a better understanding, there are 7 such levels, from level 0 to level 6. Each level corresponds to one “click” on the volume rocker of a smartphone or tablet. Accordingly, level 0 is the quietest level, and level 6 is the loudest signal level. Each level can be assigned its own values, which are in the Value is 0~255 cell, and should not go beyond the range from 0 to 255 (the lower the value, the lower the sound). To do this, you need to erase the old value in the cell, then enter the new (desired) value and press the “Set” button (the one next to the cell) to assign (Fig. 6). Be careful when using the maximum values, as the speakers may produce uncharacteristically unpleasant sounds in the form of rattling and other unpleasant effects.

figure 5 figure 6

Warning! Before making changes, overwrite all factory values ​​(in case something goes wrong).

You must know!

Editing modes in the engineering menu

Example 1 How to increase the volume of an incoming call?

To do this, you need to go to the engineering menu, print the "Audio" section, go to the "LoudSpeaker Mode" mode and select "Ring" in the volume settings - the volume settings for the incoming call. Then sequentially change (increase) the values ​​of all signal levels (level 0 - level 6). Also, for greater effect, you can increase the value of the Max Vol section. 0 ~ 160, if it is not the maximum (I set mine to 155, with a larger value, the speaker starts to “wheeze”).

Example 2 How to increase the volume when talking on the phone? (Increasing the volume level of a small speaker, the one that is applied to the ear).

Again we go into the engineering menu already known to us, print the “Audio” section, go to the special “Normal Mode”, select Sph in it - this parameter is responsible for changing the value of all signal levels in the range from level 0 to level 6. Set the one you need for us level. In the Max Vol. 0~160, can also be changed to a higher volume power setting.

Example 3 Increasing the volume and sensitivity of the smartphone's conversational microphone

To adjust and set the required volume level and also the sensitivity of the conversational microphone, you need to go to the “Engineering menu”> “Audio”> “Normal Mode”> select Mic - microphone sensitivity settings, and for all levels (level 0 - level 6) we assign one and the same value, for example 240. Now the interlocutor should hear you better.

Example 4 How to increase the sound recording volume while recording a video?

Suppose there is a need to increase the sound recording volume level during video shooting, then in the engineering menu for our loudspeaker (LoudSpeaker Mode) change the microphone sensitivity settings (mic), increase all values ​​at all levels (level 0 - level 6), for example set to 240 at every level. I remind you of pressing the button (set) - we reboot our favorite gadget and rejoice.

By the way, do not forget to press the “Set” button after each editing of a certain parameter. This action should commit and accept your command for execution. Otherwise, the user-set parameters are not activated. In addition, a certain number of mobile devices require a reboot for the changes to take effect (turn off and on the device).

Good luck with your experiments, if something is not clear - write in the comments. We are waiting for your answers.

Table of codes for entering the engineering menu

Note: table is constantly updated

Every cell phone has its own volume limit. By and large, a high phone volume is needed only so that your device can be heard always and everywhere. Only schoolchildren listen to music through the main speaker now, in order to demonstrate the superiority of their phone over the phones of their peers.

Our experts can easily increase the volume limit of almost any smartphone. If you have any questions - feel free to contact us! You can contact us by mail or call under one of the phones: ,

Sometimes there is a need to increase the volume of the phone - for some models, for example, the call is barely distinguishable on the street. How to increase the volume of the android - a lot of materials on the Internet. Summarizing all the information, we can summarize the following results and answer this question:

• You can increase the volume of the speaker programmatically. For the Android operating system, many programs have been created with the help of which the task of increasing the volume becomes completely solvable. For example, in one of the IncreasingRing programs, it looks like this:

• You can also increase the volume of an android smartphone throughengineering menu.To call it, you need to type a special command in the call menu. Different versions of android operating systems need their own call combination.

Here is a list of all combinations for calling the engineering menu on android:

• *#*#3646633#*#*
• *#15963#*
• *#*#4636#*#*

By typing one of these combinations, we get access to the engineering menu, which, as a rule, on Russian versions of android is also in Russian.

As for the iOS operating system, you can also increase the volume of the iPhone quite simply:

1. Zooming in using the buttons of the device or using the touch screen is a primitive method, but sometimes iPhone users forget about it.
2. Also, the volume of the iPhone is increased from the phone menu. To do this, we need to go to the Settings menu and select the Sounds sub-item. Use the touch screen to move the value to the right.
3. If you are dissatisfied with all the basic standard methods and the volume of the iPhone speaker seems to be still low for you, then you can resort to increasing the volume by changing the system settings, however, you must be extremely careful not to affect the settings that are significant for the system and thereby not disrupt your smartphone. Go to the system folder, then follow the following path:

/System/Library/Frameworks/Celestial.framework. Inside this folder is a file called SystemSoundMaximumVolume, which contains the volume settings for the entire iPhone system. In it, the default volume parameter is set to 0.7. You need to change the value to 0.99 and reboot the phone. If everything is done correctly, you will get the desired result.

Video about increasing the volume through the engineering menu

If the above procedure seems complicated and impossible for you, come to us at SmartKit, we will be happy to help.