All receivers that work with the Tricolor operator must be updated regularly. This is due to the fact that the company periodically improves its software and keeps up with the times.
It is convenient to update the Tricolor receiver via satellite, it does not require special skills, but it takes certain time... New updates to the set-top box software are recognized to improve the quality software interface, add new features and eliminate possible failures associated with errors in previous software versions.
As soon as new software is released for certain brands of Tricolor set-top boxes, the company informs its viewers on the info channel.
Updating the receiver via satellite
The process of flashing or updating via satellite is not super complicated and does not require special skills. It is enough to follow the instructions that appear on the Tricolor TV info channel.
The information on the screen warns the subscriber that updates for specific brands of receivers will be available on a certain day. This is followed by a warning that during the change software it is strictly forbidden to disconnect the Tricolor receiver from the network. But many, for some reason, do not heed the advice, in the end set-top box stops turning on.
Even if you have some patience and still wait until the software installation is complete, there is a risk that your receiver may reboot but will not turn on. A crash occurred during the installation of the software. This may be due to bad weather, data transmission errors between the satellite and your receiver. What to do in this case, to buy a new receiver?
Do not rush to get rid of the set-top box and buy a new one, it is possible to restore the device's performance if you have a computer or other similarly working Tricolor receiver. This method helps in almost 100% of cases of software failure, or unsuccessful update.
Firmware firmware from a personal computer
In order to flash a set-top box from a computer, you need a so-called null-modem cable (RS232), which fits to the COM port of the PC.
The procedure can be divided into the following steps:
When the update process is complete, in the DRE Burner program, in the Burning tab, the scale is filled to 100%.
This means that the software installation process is over, you need to turn off the set-top box and disconnect the RS232 cable. It is advisable to carry out all actions with connecting and disconnecting wires with a de-energized computer and a prefix.
The process of flashing from a USB flash drive
If you have a modern Tricolor receiver and your set-top box has a USB connector, you can flash the software without going through all wired connections, that is, directly. It is important that the update process is only possible with a working receiver. If your set-top box stops turning on after an unsuccessful update, or for some other reason, this way will not help you, you need to flash through the COM port.
The update process is to find the latest firmware on the site and download it to your computer. Unzip the file and write it to a formatted FAT 32 USB stick... We insert the USB flash drive into the corresponding socket and turn on the Tricolor receiver. After turning on, the software shell will detect the USB flash drive, find fresh software on the media and start automatic flashing.
The front panel may display the inscription "DL" or "L" (depending on the set-top box), which symbolizes that the boot process has started. At this time, the following inscriptions will appear on the television screen: "Upgrade bootloader" - "Clearing memory sectors" - "Writing the image to memory". During the software download process, it is strictly forbidden to turn off the receiver or unplug it from the outlet.
If during the firmware you accidentally turned off the set-top box or you turned off the light, then it will be extremely difficult to restore operability after that, or even impossible.
After the update process is complete, the bootloader will inform you with the appropriate screensaver on the TV screen and the set-top box will reboot.
The interface between the user and the hardware is called software. Satellite receivers already at the production stage contain software that includes minimal set functions and allowing the device to perform the actions indicated in technical documentation. Over time, manufacturers expand the capabilities of the hardware by installing alternative software. To obtain a spectrum additional opportunities software reinstallation is required, therefore, to replace the factory firmware, the subscriber must know how to flash the Tricolor receiver on his own. So, the firmware of the receiving device is its software, and to flash the device means replacing its software.
Thanks to feedback with users of Tricolor TV, manufacturers learn about flaws and problems in the operation of devices, work on new versions of software, fixing errors, trying to improve their capabilities. Having learned how to perform the firmware on their own, the user will keep pace with the development of the Tricolor TV company. Often new versions of programs are intended for specialists in the technical department, but in Lately company employees upload software to Free access... This step frees service centers from heavy load associated with massive customer visits.
Depending on the model of the receiving device, the process of updating the program differs. Each type of receiver has its own methodology, features and programs. The duration of the program overwrite operation usually takes several minutes, while the old software is replaced with the new one in the device:
- the newly installed software eliminates various freezes and other problems;
- translation into Russian becomes more accurate and correct;
- the channel list is being updated;
- new functions are added to the receiver;
- changing the interface to more comfortable view reading;
- the speed of the receiver increases, the sensitivity to the commands of the remote control;
- added the ability to work with external media(reading any media file formats);
- the ability to record Tricolor TV programs on a timer;
- the ability of the receiver to connect to the global network.
Usually, after a new software version is released, subscribers leave feedback on its work. Having made the decision to download new software, you can download the program to your receiver from another device on which the new software has already been installed, from a computer, from a satellite, from the Internet or from a removable media.
Uploading firmware from a computer
The first step is to connect the receiver to your computer using an RS-232 cable. In this case, the device must be disconnected from the power supply. The computer must have a firmware file and a bootloader program corresponding to the receiver model. Further, according to the instructions, the firmware is performed satellite receiver Tricolor TV. In the event that there is no port for connecting a cable, you should use a special adapter. The receiver should reboot after the update is complete. This means that it is ready to go.
Installing software from another receiving device
This method requires connecting two devices to each other through the same cable as in the previous way... The installation process is individual in each case. The connection of the two different models is unacceptable, and not every receiver type supports such a connection.
Acceptance of the update from the Tricolor TV satellite
This method is the easiest, especially for untrained clients of the company. A new version The software is transmitted from the same satellite from which the TV channels are broadcast. The receiving device notices the appearance of a new firmware and displays a message on the screen with permission to accept the update. The user confirms the action with the remote control and does not perform any more actions until the receiver is rebooted.
Using a USB stick
This method is only suitable for models with USB port... First, you need to format the USB flash drive using a computer or receiver. After that, write a file with firmware suitable for the selected receiver model on it. The finished flash drive should be connected to the receiver and act in accordance with the instructions. The final stage is automatic reboot devices.
Flashing over the Internet
In order to flash the equipment in this way, the Tricolor TV receiver must have an Internet connection and have a special port for this. Some professionals create during world wide web special resources for laying out new software. The receiving device can find such programs on the Internet and ask the user for permission to accept the update. If the receiver is prohibited from making independent access to the Internet, then the subscriber, using the menu, instructs him to scan the resources for new software versions.
Program update rules
In order to avoid damage to the receiving device, during the process of rewriting the program, do not disconnect it from the power supply or carry out any actions with it.
If the firmware was interrupted by the user, the malfunction of the device is eliminated by flashing it using a computer or another receiver. There are several other rules that Tricolor TV users should know:
- before installation new program you need to read the instructions, which indicate the sequence of actions to be performed;
- it is recommended to connect the receiver to the source during the software replacement uninterruptible power supply... This step is provided in case of a power outage and interruption of the update process, since some models of receivers are restored only with the help of special tools or in service centers;
- in order to roll back new software in case of an error or unsatisfactory operation of the program, it is advisable to keep archived versions of the software.
If for any reason the subscriber refuses to replace the firmware of his equipment, it is recommended to contact service center... Experts are always happy to help their clients.
To update the software via satellite, the receiver must be connected to a tuned satellite dish.
PROCEDURE:
1.Unplug the receiver's power cord from the outlet, and then plug the receiver back in.
2. Switch the receiver to the Tricolor TV Info channel.
3. After a few seconds, a message about the need to update the receiver software will appear on the screen as follows:
When the appearance of this message select the option "Yes" and press the "OK" button on the remote control.
4. After agreeing to update the receiver software, service messages about the process of updating the receiver software will appear on the screen. It takes about three minutes to update the receiver software.
5. Upon completion of the software update, the receiver will reboot and turn on in the channel viewing mode.
6. After finishing the software update, go to the “Status” menu and make sure that the receiver software version has changed to 3.4.432.
7. This completes the software update of the receiver, and the receiver is ready for further operation.
Video instructions for updating the software of DRE-4000, DRE-5000, DRS-5001, DRS-5003, DRE-7300 and GS-7300 receivers
How to update the Tricolor channel list on DRE-4000, DRE-5000, DRS-5001, DRS-5003, DRE-7300 and GS-7300 receivers
Updating the channel list may be required in several cases:
1. To find new Tricolor TV channels that are not on your receiver
2. After the preventive work on satellite
3. When initial setup equipment
4. When changing the broadcasting parameters (changing frequencies) of some channels
5. Prophylactically twice a year
To update the channel list, press “MENU” on the remote control of your receiver, select “Search for Tricolor TV channels” => “OK” and update the list of TV channels, following the prompts on the TV screen.
Software for receivers DRE5000, DRE7300, GS7300, DRS5001 and DRS5003 receiver 5000 firmware for free tricolor Software Update. Instructions for updating the software of receivers DRE5000, DRE7300, GS7300, DRS5001, DRS5003. Instructions for firmware and. Firmware satellite tuner receiver DRS5001. For this view there is no need for the presence on the receiver, everyone can flash through. For example USBCOM adapters for cash registers are not suitable for receiver firmware. My receiver DRE5000 if connected to my computer, MPEG4 channels 24 Mar 2014. This firmware also suitable for DRE5000, DRE7300 receivers. Firmware for receiver DRE 5000, GS7300, DRS5001, DRS5003. Receiver dre 5000 replacement keys and. Give somebody the firmware file for the DRE 4000 and DRE 5000 receivers. A question of this kind for our gurus on sat receivers. Views 1689, Comments 5, Added by. Program for flashing receivers Tricolor TV B. Firmware Receiver D 5000 for GO Viewing. The point was not that the keys change, but to leave the pirated firmware on the module. For viewing, it is enough to pay 1200 rubles and leave the receiver. Dre 5000 firmware in xd
Change to a new MP4. Tricolor DRE 5000 Satellite receiver plus. TRICOLOR no longer broadcasts in this format. How to update yourself satellite receiver 5000 tricolor. Firmware firmware for HD9305B receiver. D 5000 shows free of charge, all TV channels are free of charge. DRE5000 firmware update instructions. Those wishing to help the development of the project Y wallet money How to replace the crypto receiver module DRE5000, DRS5001, DRE4000, etc. Connection satellite TV for free channels For beginners Moderator R About DRE5000 receiver. How to flash these receivers from the tricolor, Instructions for updating the software of DRE4000 primniks, phones, flasher. Buy HD receivers and tuners to watch. Remained receiver LIT S1000, through. Firmware 5000 for th viewing. Here you can download the program for flashing receivers Tricolor TV Receiver dre 5000 replacement keys and firmware for free viewing tv Instructions for flashing and replacing the cryptomodule of the GS 7300 receiver! ! ! We update the list of Tricolor TV channels with reset to factory settings on DRE5000 and. Help with the DRE 5000 receiver, paid in tights. Software update for DRE4000, DRE5000 receivers Page. And if you want to watch other encrypted channels using a key, Here's another Tricolor
PROMOTE HOW TO FLASH THE DRE 7300 RECEIVER BUT IT'S ALL REMAINING. Latest firmware for receivers DRE5000, DRE7300 A Instructions for updating the software of DRE4000, DRE5000, DRS5001, DRS5003, DRE7300 and GS receivers. Updating the software of the DRE5000 receiver and its analogs using a computer and zero Firmware. Organic search results Top 20. Latest firmware for receivers DRE5000, DRE7300 This firmware is based on. The DRE5000 receiver is suitable for viewing not only Tricolor TV channels, but also NTV with CAM module... Learn more about Firmware for receiver DRE 5000, 5001, 7300. Hello, tell me how to update the firmware via satellite receiver DRS 4500. Firmware 5000 tricolor for free viewing. Tricolor TV Download. Here you can download the program for flashing Tricolor TV receivers DRE5000GS. DRE5000 is an MP2 receiver. Flash 5000 for free viewing. About DRE5000 receiver and scrambled channels. Tuner clones MASTERCODES Receivers KEYS for TRICOLOR SAT IRON
