Torque pro
Works on tablet devices like the Motorola Xoom, Dell Streak, and Samsung Galaxy Tab Works on any car that supports OBD 2 standard (in most vehicles built after 2000, but might work for cars as early as 1996) - if in doubt check with the manufacturer of your first or search for "OBD2" written on large white marks in the engine compartment Works on vehicles made by Ford, GM / Vauxhall / Opel, Chrysler, Mercedes, Volkswagen, Audi, Jaguar, Citroen, Peugoet, Skoda, Kia , Mazda, Lexus, Daewoo, Renault, Mitsubishi, Nissan, Honda, Hyundai, BMW, Toyota, Seat, Dodge, Jeep, Pontiac and much more vehicle makes, Europe, USA, Far East, etc. Some vehicle ECUs may support more or less capabilities than others. The app needs a Bluetooth OBD2 adapter to work.
TECU 2.3.2.1
The program supports Toyota / Lexus protocol, Nissan Consult II protocol, Nissan Consult I protocol, Hyundai protocol part, Cherry Tiggo car Delphi MT20U ECU protocol part, Mitsubishi car MUT-II protocol part, DAIHATSU protocol part and OBD-II standard protocols: ISO- 14230 (5 baud init / Fast init), ISO-9141, which can be used to test Honda, Hyundai and other cars.
Scanmaster ELM
The program is designed for car diagnostics according to OBD-II / EOBD standards, which were developed specifically for ELM327 chip, from ELM Electronics and supports all OBD-2 diagnostic communication protocols, such as SAE J1850 (PWM & VPW), ISO15765, CAN, ISO9141 and ISO14230. Works with ELM327 adapters via various interfaces: ELM327 Bluetooth, ELM327 USB and ELM327 WiFi.
Works with adapters based on ELM 32X chips. Allows you to view data online, freeze frame, engine errors and some automatic transmissions (read and erase), perform performance tests and monitor systems, has a built-in Dynometer. Is able to display data in a graphical form in the form of instruments and graphs. Has been working with cars since 1996. American market, since 2001. with European gasoline, since 2004. with European diesels.
ScanXL Professional
ScanXL Professional is a program for car diagnostics using the OBDII (OBD2) protocol for the ELM327 adapter.
TiggoDiag
The Tiggo Diag diagnostic software is the best solution for motorists who have cars of the Chinese manufacturer Chery, Great Wall and others.
The presented program for the diagnosis of Chery and Great Wall Tiggo Diag cars will allow you, with a conventional K-Line adapter or ELM327 adapter, to perform not only engine diagnostics, but also work with additional car devices.
HobDrive
Primary task HobDrive- continuously work in your car, collect statistics and analyze performance using an OBD-II adapter.
HobDrive is compatible with most modern cars:
- Russian cars with January and Bosch controllers (VAZ, Volga-Cyber, UAZ Patriot)
- Most foreign cars from 1995 (OBD2 compatible)
- Rare models, usually not diagnosed by conventional programs: JDM (Japanese domestic market) - Nissan and Toyota, Chery Tiggo, and others.
OpenDiag Mobile
Software for android 3.1 and higher for diagnostics of Russian-made cars, using ELM 327 Bluetooth or Wi-Fi adapter, USB-COM with FTDI chip.
- WHA:
- BOSCH M1.5.4 R83
- BOSCH M1.5.4 E2
- BOSCH MP7.0 E3
- BOSCH MP7.0 E2
- BOSCH M7.9.7 E3 / E4
- BOSCH M7.9.7 E2
- BOSCH ME17.9.7
- BOSCH ME17.9.7CAN
- January-5 R83
- January-5 E2
- January 7.2 E2
- Itelma VS5.1 E2
- Itelma VS5.1 R83
- Itelma / Avtel M73 E3
- Itelma M74
- Itelma M74K (Classic)
- Itelma M74CAN
- Itelma M74CAN MAP
- Itelma M75
- Itelma M75CAN
- Itelma M86CAN
- GAZ / UAZ:
- BOSCH ME17.9.7 MT
- BOSCH ME17.9.7 ET
- BOSCH ME17.9.7 (1) MAP
- SOATE (GAZ) ***
- Mikas 5.4 (GAZ) ***
- Mikas 5.4 K3 (carb) (GAZ) ***
- Mikas 7.1, VS 5.6 ***
- Mikas 7.1 K3 (carb) ***
- Mikas 7.2 (UAZ) ***
- Mikas VS8 E2
- Mikas 10.3 / 11.3 *
- Mikas 11 E2
- Mikas 11 E3 MT and ET (mechanical and electric choke) **
- Mikas 11 CR
- Mikas 12
- Mikas 12.3
- ZAZ:
- Mikas 10.3 / 11.3 + *
- Mikas 10.3 / 11.3
- Mikas 7.6
* Additional parameters (Ignition passes) only via USB K-Line.
** Blocks require Protected Mode! Entering it may require sending a long request to the block! Elm327 does not support such requests! In this case, connection to these units is possible only via USB K-Line
*** Connection to units only via USB K-Line.
OpenDiag for Windows
The program is designed for computer diagnostics of automotive systems of Russian-made injection vehicles. The program is used to carry out maintenance and repair of cars in car services, service stations or by the owner of a car with the appropriate equipment (adapters and PC).
The program can work with three types of adapters: K-line adapter, ELM327, and J2534(MiniVCI, OpenPort 2.0 and the like) (this adapter is not supported in the free version).
Diagnostic Tool
The program allows you to diagnose and display all parameters of the engine control unit using the K-line protocol.
Supports control units:
- Bosch M1.5.4 (N) (all modifications)
- Bosch MP7 (Euro-II / Euro-III)
- Bosch M7.9.7 (Euro-II)
- January 5. * (all modifications)
- January VS 5. * (all modifications)
- January 7. * (all modifications)
- Mikas 5.4
- Mikas 7.1.
EconTool ELM327 for Nissan
The program for the diagnostics of Nissan cars using the Nissan Consult protocol.
Motordata ELM327 (RUS)
Free diagnostic software for ELM327 in Russian from the company "Legion-Avtodata"
Allows using a laptop and an ELM327 USB adapter and ELM327 Bluetooth to configure the engine and make advanced diagnostics. A distinctive feature of the program is the additional the ability of Motordata ELM327 to diagnose Toyota right-hand drive vehicles.
ELMConfig
A cool program for diagnostics, tuning and even chip tuning of Ford cars. Moreover, this program is free in Russian!
OBDwiz is a computer diagnostic program for cars. Works with devices such as ELM327, Scantool OBD Link and others.
In terms of functions, it is at the ScanmasterELM level and is even free. Therefore, it is often used in work, because it does not need to be hacked to work.
Oliviadrive
This is a free diagnostic program, the main advantage of which is accurate measurement of fuel consumption. The indications are the same as those of the on-board computer.
Car diagnostics program for bluetooth devices. Analogue of Torque Pro, but it has a difference in that it can customize the operation of the electronics. Those. do activation / deactivation of additional functions.
For example, on the Skoda Octavia A5, you can configure the arrow test and similar functions.
JeepDiag
Diagnostic program for a specific make and model of a car - Jeep Grand Cherokee 2.7 CRD. It is presented in three versions: Free version for Windows, Android; PRO version for Android.
ELMScan Toyota
The program supports the following auto blocks:
- Engine
- Transmission
- Cruise control
- Immobilizer
- ABS / VSC / TRC
- Suspension
- Electric power steering
- VGRS
- Rain sensor
- SRS Airbag.
DDT4ALL
Cool software for Renault car owners. Because with the help of it you can make both a complete diagnosis of all systems, there is also an adjustment of the electronics. There is a Russian language (partially).
For example, you can set up tire pressure monitoring via the ABS system and much more!
This article is, in fact, an overview of universal programs with an Android application for computer diagnostics of domestic and foreign cars, in particular, Chinese ones, using a laptop or phone.
The emphasis is on the versatile program based on the Nexus tablet, which has the greatest potential for diagnostic capabilities.
Car computer diagnostics software
A universal diagnostic program for android, due to the technical imperfection of existing computer devices, was absent on the market for a long time, as a result of which car owners were forced to use a whole set of programs with different characteristics.
The most popular ones are:
- Torque lite... Developed in an expanded and reduced version. The abbreviated version is free and sufficient for analyzing and adjusting the main parameters of the engine. In addition, it finds and removes ECU errors, including the "Check Engine" indicator.
- OBD Auto Doctor Pro (Lite)- ICE diagnostics online for all
functionally significant parameters supported by the vehicle ECU.
Includes the ability to read data in vehicles with multiple controllers. - EZWay:
-Control over almost all parameters of cars using a laptop;
-Statistics of trips with saving sensor readings.
In fact, this program is a driver's diary via a laptop. - ScanMaster Lite... OBD-2 and EML standard. Great opportunities and high quality diagnostics. The only difference is in the Pro (full) and Lite (shortened) versions.
- ECU Tracker... Operating system - Android. The malfunction is detected immediately via the Internet. The driver has only a decision: to put his "horse" on MOT or not.
- HobDrive... Uses GPS. Vehicle sensor data is captured and stored continuously.
- BMWhat Android- application for BMW models. The quality of diagnostics is not inferior to professional scanners.
All of these programs operate via ELM327 Bluetooth. Interface - OBD-2.
The operating mode is remote.
Disadvantages:
- lack of a "root" account, which makes it possible to perform all diagnostic operations;
- lack of "recovery mode" - the recovery mode of the ECU system, which performs a reset and update of settings.
A universal program for Android appeared on the market relatively recently, but immediately gained popularity among motorists.
The main feature is the Nexus tablets. They are the only ones equipped with the very latest Android OS application with exceptional capabilities.
Rot and recovery have been included with the Nexus software from the date of sale. No separate software is required to install these utilities.
Smartphones of the Nexus model are also equipped with the universal program. The dignity of the brand is also in the wide software, without any restrictions, and at a relatively low price.
Chinese car diagnostic software
Tiggo dia- Of all the programs used to diagnose cars with the Made in China brand, this one is the best.
It is suitable mainly for Great Wall and Chery cars, but other models may well be investigated with its help.
The program generally meets the requirements of a typical driver. It allows you to identify and subject the necessary correction to the main parameters of the engine and chassis.
Equipment required to install Tiggo Dia:
- PC (laptop, tablet, smartphone),
- adapter (remote EML327 or regular K-L).
The program determines the following parameters of the motor system:
- speed (km / h),
- engine speed per minute,
- ignition timing,
- throttle valve (position at all revolutions according to sensor readings),
- detonation of cylinders 1 - 4 (delay),
- temperature (intake air, coolant),
- oil pressure (according to the on-board computer sensor),
- determination of ECU errors and their correction,
- online mode,
- graphic reflection of parameters on the monitor of a computer device,
- voltage in the electronics network (V), etc.
You can buy or download it online. Working with Tiggo Diag is simple and allows you to control the technical condition of the car at any time. However, in the event of major malfunctions, it is preferable to contact a specialized auto center.
Programs for diagnosing the main blocks of VAZ models
- OpenDiagPro... The program is suitable for all models of domestic cars. Functions: reading ICE parameters, ECU errors, settings.
- Motor tester,
- My Tester VAZ,
- KWP,
- AVTOVAZ New,
- DiagnozNK,
- ICD,
- BOSH diag- computer diagnostics of Bosh controllers (if they are installed on this VAZ model).
- Auto2- viewing information from the ECU, changing parameters, statistics of data from sensors,
- DriverPackSolution- a program containing installation drivers for all of the above applications.
The interface for all programs is in Russian.
Summary characteristics of the programs:
- Installed on a PC (laptop, tablet, smartphone) along with a driver,
- Adapter - wired (K-L) or remote (Elm327),
- Communication with the controller via a stationary OBD-2 connector,
- Mate with electronic control units "January" and "Bosh".
- The following functions of these controllers are affected:
- electronic processing of data from sensors and control of the vehicle's propulsion system;
- EPROM (programmable read only memory), displaying statistics of vehicle movements based on sensor readings;
- RAM (random access memory), which corrects the parameters of the OVS at every moment of movement and ECU errors (turning off the ignition system leads to the disappearance of operational information);
- EPROM (reprogrammable storage device) that controls the alarm. - Controlled by sensors:
- speed (km / h),
- crankshaft speed,
- throttle valve,
- temperature of suction of air, coolant,
- ignition,
- detonation,
- radiator and fan, as well as others.
Sequence of actions for diagnostics:
- Installation on a PC (laptop, tablet, smartphone) of one of the programs used to diagnose domestic cars.
- Connection to the VAZ ECM of the Bluetooth system using the EML3227 adapter or the "K-Line" cable adapter via the Obd connector.
- Reading and adjusting the necessary parameters of the ECM "January" or "Bosh".
- Reading and eliminating errors of the electronic control unit
WOW-car diagnostics
Wurth wow- a program for diagnostics of cars and trucks with a carrying capacity of up to 3.5 tons.
Programs similar in capabilities:
-Autocom,
-Delphi.
Diagnostic equipment with WOW:
- personal computer, tablet or laptop; you can work through a phone (smartphone);
- Snooper BT (universal electronics switch with the ability to remotely control a PC via Bluetooth; power supply - 12V, 24V),
- Windows OS
ADO allows diagnostics of almost all car models existing in the world within the framework of WOW. The data is provided by the manufacturers and is constantly updated. The accuracy of the information is impeccable.
Conditions for connecting to WOW Autodata Online:
- OS Windows Vista, Windows XP, Windows 7,
- your e-mail,
- monitor with a resolution of at least 800 x 600,
- high-speed internet,
- Internet Explorer 7 - 11 or Mozilla Firefox (Opera gives incorrect data).
Benefits of WOW:
- interface and application AutoData - Russian. You don't need to know English or use a translator,
- compatibility in the Obd connector,
- it is possible to use the Autodata Online (AdO) service and constantly update the program,
- Blutooth. Bluetooth is a great diagnostic advantage with WOW.
Conclusion
The Russian market is currently filled with a huge number of all kinds of software products that allow high-quality diagnostics of all types and types of cars.
Diagnostic programs, as well as the technical characteristics of their carriers, are constantly being improved.
The user should pay attention, first of all, to those programs that allow installing new utilities on an existing platform without purchasing another medium, be it a tablet, smartphone or phone.
A new diagnostic program should be purchased only if it expands your capabilities, and does not duplicate the potential of previous programs.
A universal Android program based on the Nexus tablet is the best in this sense.
Andrey Goncharov, Expert of the heading "Engine repair"
The information stated above (how to diagnose a car yourself) is just a slightly open door to the world of computer autodiagnostics. The improvement of electronic devices in cars requires the driver to be able to identify malfunctions on their own, because this is not only cost savings, but also prevention from serious breakdowns. Yes, you can contact a car service or service station and fix the problem. Sometimes you have to do it. But at least you can find out where the breakdown is, so that you can talk to the mechanic in an understandable language.
Let you first learn how to read error codes from the on-board computer. The next stage of development, perhaps, will be an expanded understanding of the diagnostic process, which can become a source of business. After all, autodiagnostics services have become in demand.
New on-board computers contain information about the operation of absolutely all units and mechanisms. A modern driver is required to be able to work with auto scanners and software, which are described in this article.
Our technical support
.
All equipment sold in our online store is equipped with programs and installation instructions. However, users often lack the skills and experience to install diagnostic software. In case of problems, we provide consultations by phone, skype and e-mail. Since 2015, we have introduced online technical support, that is, installing and configuring programs on your computer (this is especially important for regions!). All that is needed from you is a computer connected to the Internet, the distribution of the installed program and data - the ID and password that you will receive
Vehicle diagnostic software is used for maintenance and repair using a PC or laptop in almost any environment. The program reads information from the electronic control unit (ECU) of the car through an adapter and allows you to visualize the received data, both in graphic and digital form. Depending on the functionality, the program can display data in real time, control actuators, receive error data, and much more.If you are interested in a specific car brand, then select a diagnostic program with an adapter
