After purchasing a set-top box, many users ask a completely natural question: “How to connect a digital receiver to a TV and what is needed for this?” Some models abound big amount connectors, wires and other interfaces that can confuse owners who are inexperienced in this matter. Nevertheless, despite all the seeming heap of problems, you can learn how to connect a TV receiver to a TV without the help of a wizard.
First of all, let's figure out what it is - a receiver. Essentially, the only purpose of a set-top box is to decode various signals: video, audio, digital, analog and radio. After passing all this information through the main unit of the device, the device redirects them to the TV already in its (correct) encoding. Thus, thanks to the TV set-top box, you can get rid of a pile of cables in your home. In addition, if there is such a need, you can configure the transmission of channels to several devices. Also keep this in mind before connecting two TVs to the same receiver.
Connectors
Most TV boxes have a large number of connectors and interfaces. Of course, it would be easier to equip the device with one universal output for convenience, but not every home has a TV, for example, with a modern HDMI interface. Yes, such an output is capable of transmitting video and audio signals as correctly as possible, but they cost similar models not cheap and not for everyone.
Some people still can't part with "ancient" TVs, so many set-top boxes are burdened with versatility for the sake of convenience. Nevertheless, it will not be superfluous to clarify the presence of one or another connector / interface for your TV before purchasing the set-top box. Also keep this in mind before connecting your TV to the receiver.
Signal quality
You can count more than a dozen nuances that are responsible for the quality of the decoded image. Here and the original signal from the satellite that the receiver receives, and technical capabilities interface unit of the device, the type of cable used and much more.
Choosing the interface of a TV set-top box should be extremely balanced, taking into account not only the capabilities of your TV, but also the future provider, the type of satellite dish, up to weather conditions your region.
So, how to connect a TV to a receiver: interfaces, methods and optional equipment.
"Tulip" (RCA)
At one time, this interface was the only link between various set-top boxes and the TV itself. It got its name thanks to the trio of connectors resembling a tulip: white, red and yellow.
Each color represents certain channel: White and red are the audio outputs, and yellow is the video channel. In order for everything to work as it should, you need, according to the color coding, to connect to the appropriate interfaces by connecting yellow to yellow (Video IN c Video OUT) on the TV and set-top box. Do the same with the rest of the "petals".
One of the main disadvantages of this connection method is mediocre transmission digital signal, so the video in high resolution will be output with noise (very small ripples). If the diagonal of your TV screen does not exceed 30 inches, then the interference is hardly noticeable. Explicit problems are visible on devices with a large scan. Keep this in mind before connecting the TV to the receiver using "tulips".
S-Video
This interface is required for game consoles and in DVD players, but not every TV is equipped with this connector. If we compare the output of S-Video and "tulip", then the first one is distinguished by better decoding of the picture. In addition, its signal frequency is much higher, which means that the output image is more colorful and juicy.
The only problem with the interface is the obligatory presence of a separate loop for playback audio tracks(we buy separately), so you can’t call it universal. Also keep this in mind and check everything before connecting the TV to the receiver via the S-Video output.
SCART
The "SCART" interface, or, in the common people, "comb", is much more versatile, unlike previous options. In order to connect a TV through a receiver with this output, you just need to connect the appropriate connectors, and everything will start working.
Although the interface is outdated due to its bulkiness, it meets almost all modern requirements: support for stereo sound, S-Video channel and RGB format. This connection method, except for set-top boxes, is widely used on old DVD players.
RF interface
The RF type interface allows you to connect not only satellite broadcast, but also cable TV. The transmission quality through this output does not have a good picture, so watching TV in high definition has the mesh ripples already familiar from the "tulips", as well as a problem with large diagonals devices.
One of the main advantages of such an interface is the ability to connect the receiver to a second TV. The only condition that must be clearly observed is the presence of a high-frequency RF modulator in the set-top box and the corresponding output. And not all TV set-top boxes have such components. So keep this nuance in mind before connecting the Tricolor receiver to the TV, because many devices from this provider lack such a technical capability.
YPbPr and YCbCr interfaces (component)
These outputs transmit high-frequency signals similar to the "tulip". Unlike the RCA interface (3 "petals"), the component system (5 "petals") allows you to decode signals from high precision and the same quality. That is, with the help of such a connection, you can comfortably watch videos in Full HD-scan.
The only difference between the YPbPr and YCbCr component interfaces is the decoding system, where in the first case it processes analog signal, and in the second - digital.
The connection is as follows: green, red and blue "petals" (aluminum) are connected to the corresponding outputs on the panel marked "Video", and the other two - white and red (plastic) to the platform with "Audio".
The green cable is responsible for image synchronization and brightness level. The red "petal" transmits the inter-level difference in brightness and red color, as well as the blue cable. A two-pin RCA interface is responsible for the audio output.
HDMI
HDMI interface is the most modern and generic method connecting the receiver to the TV. The set-top box, as well as the TV, equipped with these outputs, is able to reproduce the image in high quality and with amazing clarity.
This type of connection is suitable for absolutely all TVs with any diagonal that have a similar connector. In addition, the HDMI interface is capable of simultaneously digitizing both audio and video streams, so for correct operation you don't need to connect anything extra. All you need is one single cable.
Summarizing
Before buying such a far from cheap thing as a receiver, be sure to check if your TV has certain outputs. If you have new model, then for sure it is equipped with an HDMI interface, which means that there will be no connection problems, as well as with image quality.
In second place are component "tulips" for analog and digital signals - YPbPr and YCbCr. Slightly worse than HDMI in terms of connection, but nevertheless, the output picture pleases the eye in the same high Full HD quality.
The third and fourth place goes to the SCART and S-Video interfaces. The main thing here is not to overdo it with the screen diagonal, otherwise small ripples will be noticeable in high-resolution pictures.
The fifth and sixth positions went to the RF and RCA ("tulip") connectors. The quality of the decoded signal on these interfaces is noticeably lower than on the others: low sound bitrate, a slightly “blurred” picture, and the finicky of the connectors to certain TV models.
You should also remember that before connecting the set-top box to the TV, you must follow the following rules:
- Be sure to disconnect all appliances from the mains at the time of connection.
- Carefully study the manual, especially the "Connection" item.
- Based on the second paragraph, strictly follow the sequence of actions performed.
- Use normal cables (proprietary RG-6) and not Chinese thin imitations.
- No need to use long cables, since it directly affects the stability of the image.
After you have connected the receiver, it will be useful to double-check everything (whether the cables are tight, markings, etc.), and only then turn on the equipment.
In many houses of our country came satellite television Tricolor TV. Their sets are in deserved and constant demand among the population due to the high quality of the signal, low cost and ease of purchase via the Internet. After you purchase satellite dish and a receiver, you can order a full range of services for the installation of a Tricolor TV television set from a specialized company. In this article, you will learn how to independently install, connect and fully configure satellite system Tricolor TV.
Kit assembly
Even a person who is completely unfamiliar with technology can independently assemble the purchased kit. If you decide to install and set up the dish and receiver yourself, we advise you to study the instructions and remember the names constituent parts satellite dish. You should also understand exactly where and how the Tricolor TV receiver is connected.
cook tv cable with plugs. First of all, we place the converter in the holder.
Pay attention to the connector, it must be directed downwards so that raindrops do not flow into it.
The mounting sleeve must be securely fastened to the working area of the converter. Before installing the antenna, we advise you to check and tighten all the bolts again. In order to properly adjust the head and find the exact direction to the Tricolor TV satellite, this will have to be done more than once during the installation process.
Mounting the antenna
For getting quality image on the TV screen input through the output of the receiver, you need to fine tuning antennas to the Tricolor TV satellite and the absence of visible interference on a straight line mentally drawn between them.
Before proceeding with the installation, carefully read the documents of the equipment set and find the name of your set there: “Center” or “Siberia”.
The plate should look strictly to the south, and is also fixed exclusively on the outer wall or mast. In no case can it be installed between high-rise buildings or trees that cover the imaginary axis drawn between the dish and the satellite.
If it was decided to independently install the receiving device on the outer wall of the house, then the bracket should be fixed with reliable anchors. If this rule is not followed, a strong wind can tear off the mounts and the antenna can cause a lot of trouble. The mounting location must be selected from simple calculation: As close as possible to where the receiver is installed.
Even when using a double-braided cable with a thicker copper core, this distance is limited to one hundred meters. If such a close installation of the kit is impossible, we advise you to purchase and configure additional amplifier. The process of acquiring it is not complicated, it is usually available in any store selling television equipment.
After the purchase, the antenna is first assembled and installed on an already fixed bracket. We clean the television cable from the top layer of insulation from both ends, one and a half centimeters. In the direction from the end to the middle, carefully wrap the shielded braid and wind the F-connector onto the freed part. We leave the main copper core protruding two millimeters beyond the connector, and bite off the rest with pliers. Now you need to connect the receiver with a cable going to the antenna converter.
We connect the receiver
There are two ways to connect the Tricolor TV receiver to the TV yourself:
- high-frequency connection with an antenna cable;
- low frequency receiver connection ordinary cable with "bells" or a "scart" connector.
For HF connection: plug the cable into the antenna jack of the TV and connect it to the receiver's RF Out output. Then connect the receiver with a cord to electrical outlet and turn on the power switch. The screen should show "BOOT" and the channel number. Then we run in television receiver automatic search channels and look for a channel labeled "No signal", indicating to us that the receiver is connected correctly.
With LF connection: the receiver is connected with a cable with "tulips" or "scart". We turn on the receiver to the network and wait for the word “BOOT” to appear on the screen, and then the numbers of the channel number. On the control panel of the television receiver, the video mode is set using the “A / V” key. If we see the inscription "No signal", then the receiver is connected correctly.
Next, you need to check the presence strong signal coming from the satellite to the receiver. We are trying to display any random channel on the TV. The screen will display the channel number, the broadcast from the satellite to the dish and the time. Since the antenna is not tuned, the TV screen will have Blue colour all over the background.
We are looking for the inscription "i" on the receiver's remote control and turn on this button. Two scales “Signal Strength” and “Signal Quality” should appear on the screen, according to which the settings should be made, and then we will independently configure the satellite dish.
Setting
Last milestone the work necessary to obtain a high-quality image on a TV - correct setting satellite dish and receiver "Tricolor TV". This action can be performed independently, adhering to the direction of the antenna due south. Further actions it is advisable to carry out the reception of a signal from the antenna together with family members or any assistant.
Place it near the TV and wait for commands from it about the result on the screen, independently and gradually turning the satellite dish up and down, right and left a centimeter.
The presence of a neighboring Tricolor TV antenna makes it much easier to set up. Just copy its direction and slope, achieving the most complete filling of the fields of both scales on the screen.
You need to start setting up the signal from the vertical position of the dish mirror, gradually moving it in the horizontal plane. We look at the screen: if both scales are filled, it means - caught good signal. Soon a high-quality image appears on the television receiver. If only one scale is full - the signal is not coming from the 'Tricolor TV' satellite, you need to look further. By gradually turning the antenna mirror on our own, first horizontally, then vertically, we adjust the maximum filling of the scales and the highest quality image on the TV screen.
Registration
To register a receiver you will need:
- card number "Tricolor TV";
- serial number of the receiver;
- the code indicated on the card;
- owner's passport;
- kit installation address.
The easiest way is to register your receiver number through the Tricolor TV website. After filling out a special registration form, your contract number will be displayed in the window and the card will be activated. The contract can be downloaded from the site, printed, signed and sent to the address indicated on the site by regular mail to the company for signature.
You can register the installation by phone numbers of the company listed on the site. It will take a little time, and the result will be the same, the contract will be sent to you by mail. Most importantly, along with the purchase of your favorite TV shows, you get a guarantee for the entire set of equipment! We wish you to self-installation and setting up a satellite dish and receiver "Tricolor TV" was successful and Have a good mood as a result of watching interesting TV shows!
Provider digital television Tricolor TV provides services High Quality. Despite this, users are in no hurry to buy additional equipment when using the system. Even if it is necessary to connect Tricolor TV in two rooms, they are looking for non-standard solutions. The provider allows the use of one receiver for several TVs. How to connect a second TV to Tricolor TV without a second receiver?
You can use one antenna to provide a signal to several devices at the same time. Tricolor TV offers to independently implement the transfer of the antenna to the second TV. There are two ways to do this:
- To view identical channels on two screens at the same time, it is enough to purchase a cable of the required length and a signal splitter. This option is the most economical and not labor intensive. The separator is only necessary if the device does not have a dual output system. To connect a second TV, you need to connect one of them to the output, and the second one - to connect via HDMI or SKART.
- If watching the same TV channels is not suitable, then you can connect the receiver so that the channels can be switched on two TVs. To do this, you need to purchase a GSE-501 receiver and a special prefix GSC-591. Connection procedure: stretch the cable from the convector device to the receiver. The set-top box is already connected directly to the second TV and is designed to perform a secondary role: conducting a signal. Installed equipment allows you to change the firmware and update the software.
Connecting Tricolor TV to 2 TVs with your own hands: video
To connect Tricolor TV equipment to two TVs, you can install via a local network or use a router for this purpose. In order to create your own local network you need to crimp the cable first special connectors, and then connect the auxiliary set-top box to the main unit. In order for everything to work, it is necessary to connect the wires in such a way that they do not cross.
After installing the equipment, you should configure the channels using the above sequence of actions. Carefully study the instructions so as not to run into setup problems.
In the event that you do not want to install a lot of cables that spoil the situation, then you should purchase a video sender for a satellite dish. It consists of 2 devices, one of which is connected to the receiver itself, and the other to the TV. Signal transmission is provided via wi-fi.
IN this case also provides for the use of the remote control remote control.
In order for the presented scheme to work, before connecting two TVs to one Tricolor receiver, carefully study the instructions for the manual and purchase all necessary equipment. Any of the chosen methods will cost much less than buying another receiver.
Setting up the Tricolor TV system on your own so that it works on 2 TVs at once is not a problem. The main thing is to observe the frequency of actions so as not to encounter unplanned problems when making subsequent settings.
You have made a long-awaited purchase and wondered how to connect without problems new receiver Tricolor to TV? Now there are many specialized communities on the Internet, where detailed step-by-step instructions for connecting certain models are laid out, and the manufacturer himself is interested in making his device as accessible as possible in terms of connecting out of the box. Due ongoing process debugging by the manufacturer and increasing the knowledge base by the communities, digital set-top box is no longer a rare guest in the apartments and houses of Russians.
All Tricolor prefixes have letter designations:
- Cable connection - abbreviation C on the box.
- Ground receiver - letter T.
- Satellite receiver - S.
tricolor offers wide range satellite devices. Old and side by side in stores, and the choice is not always in favor of the latter. The fact is that the division into “old” and “new” is only formal, some devices were produced for no more than two months, giving way to the next generations. There is a significant difference between the models. For example, a number of interfaces that can be found on the rear panel of the receiver:
- HDMI cable.
- Antenna high frequency output.
- Tulip.
- SCART wire
Receiver connection diagram
Antenna output and SCART are inherent in the old generation of set-top boxes. In some modern models There is only HDMI. Before purchasing equipment and connecting it to the provider's network, you should compare all the pros and cons, ask the consultant about the speed at which the device turns on, as well as its technical characteristics.
It will not be superfluous to turn on the receiver in the store, carefully study the package (cables and adapters that can change) and listen to all the seller's recommendations before agreeing to a purchase.
All provider devices are pre-configured and do not require additional manipulations, however, difficulties may arise in terms of hardware, for example, the lack of necessary adapters. However, the old cable from the receiver does not have to look for a replacement, most often it also fits a new device.
Connecting a special Tricolor receiver to your TV will be easier if you know some of the nuances in advance.
For more fine tuning you need to turn on the receiver and see what firmware it has. If necessary, her.
Let's consider the algorithm , how to connect the receiver via cable:
- The jack output on the TV is connected to the device with a cable.
- Both devices turn on. The receiver displays the channel number.
- On the TV remote control, press "0" and use the search. Autoscan will stop at the operating frequencies of your Tricolor set-top box.
- If the device is connected correctly, the message “no signal” is displayed on the TV screen.
Another way is to connect to LCD panels:
- To connect, you need a SCART wire or, in other words, “bells”.
- The cable is inserted into the socket on the receiver, the other end of the wire, respectively, to the TV, after which it should be turned on.
- The device will show serial number channel.
- On the remote control, you need to press A / V, this will help you enter the video mode. Next, you have to find the connection we need in the menu. At correct connection you will see the message "no signal".
- If it still did not appear (or the inscription is different), then something was done incorrectly. Next, hold down the buttons 0, 1 on the remote control.
- The picture will be displayed as soon as the signal is received (find out what to do if). Below you can see all the information about the received TV channel. To display the signal level, on the remote control you need to press the "i" button a couple of times. These scales will help further search satellite signal.
Connecting the receiver via SCART and HDMI
If the text version of the Tricolor receiver connection diagram is not entirely clear and clarity is required, we recommend that you watch thematic videos.
Summing up, it should be noted that connecting the receiver to the TV is not difficult, since the kit always has a detailed step-by-step instruction Moreover, as noted earlier, today this process is maximally simplified and automated. By the way, you can install the Tricolor system not only on one, but also, but if you wish, you can.
