The performance of any operating system decreases over time, and a Windows 10 computer or laptop will start to slow down. Sometimes there is not enough time for full maintenance, and there is not enough money for it.
Here are 10 tips to speed up your PC.
P.S.
All tips were tested on a test virtual machine
version 1607 (build 14393.105).
1. Toned interface
The transparent start menu looks nice, but it (slightly) slows down your computer's performance. Turn off transparency to direct resources in the right direction.
Start - Settings - Personalization - Colors - Make the Start Menu, Control Panel, and Action Center transparent Off.
2. Disable special effects
Visual beauties are best left to games.
Right click on "Start" - Control Panel - System and Security - System - Advanced System Settings - Options - Visual Effects tab
To turn off unnecessary animations and special effects, select Ensure best performance. You can also select Special effects and manually uncheck visual effects that you can do without.
3. Clean autoload
Does your PC take a long time to boot up after being turned on? Perhaps there are a lot of unnecessary programs in autoload.
For convenience, sort programs by the Startup Impact column and disable unnecessary and most resource-intensive ones.
Important: if you are an inexperienced user, we recommend that you carefully study the list and figure out which of these programs are system programs and which are simply wasting resources. It's very easy to do - just google the name.
4. Work on mistakes
Use the standard Windows 10 tool to find and fix problems. This simple method helps to correct a number of standard errors.
Right click on "Start" - Control Panel - Troubleshooting - under System and Security click "Troubleshooting" - Next
5. Give 10 seconds
To make your PC boot faster when you turn it on, you can reduce the Boot Menu Time-out
Right click on "Start" - Control Panel - System and Security - System - Advanced system settings - Startup and recovery - Settings 
Opposite the line Display a list of operating systems, set the value to 10 seconds.
6. Don't listen to advice
Windows 10 tries to be useful ( It would be better if the Skrepysh was returned! - approx. ed.) and tells you how to use the new interface features. Unfortunately, this feature may affect performance. Disable it:
Start - Settings - System - Notifications & actions - Get tips, tricks and tricks while using Windows Off. 
7. Clean disk
Another method that is relevant for any version of Windows. Disk Cleanup will improve performance and free up space on your hard drive.
In the search bar, type "Disk Cleanup" - Run the program - Clean up the disk (yes, sometimes everything is so simple. - ed.)
8. Remove pre-installed software
Have you ever used pre-installed programs? Most likely, you never even opened them. Remove this garbage, as well as all software that has not been used for more than a year.
Right click on "Start" - Control Panel - Uninstall programs in the Programs section - Remove everything unnecessary 
There is no extra software on our virtual machine :)
9. Watch your diet
Do not use Energy Saver mode unnecessarily.
Right click on "Start" - Control Panel - System and Security - Power Options - Select scheme - High performance or Balanced 
Settings are disabled on desktop.
10. Restart your PC
Just try restarting your PC. No, except for jokes - this will offload RAM and is guaranteed to zero out processes that start to overuse system resources.
By the way, not everyone knows that shutting down and restarting a PC is not the same thing. Windows 10 uses the Fast Boot feature, which saves a "snapshot" of the system to get you up and running faster. How was this not enough before! 
Hello IT department, have you tried turning it off and on?
Many owners of PCs and laptops are accustomed to the seventh version of the Windows operating system and do not want to switch to the "ten" in any way. But in vain. It's much more productive. But it needs some tweaking. Like any system. But with the right settings of all parameters, the difference will be noticeable. Let's talk about how to speed up a laptop on For this is an eternal problem. Laptops tend to be more problematic than PCs. Let's fine-tune the "dozens" on laptops.
Why do it?
This is necessary in order for the computer to work quickly and stably. Everyone is annoyed by brakes and glitches. And this action will help the laptop to work quickly and stably. However, some not very advanced users take the word of many "gurus" from the Internet and set up their laptop in such a way that there can be no question of any performance. Need to know on Windows 10 and not believe the "pros" from the web. Because you can seriously harm your device. Up to death. Laptops with SSD drives are especially susceptible to this.
System optimization will also be useful for those who love games. It is known that the "top ten" is perfectly optimized for gamers. But more careful tuning can increase performance. The increase will be visible to the naked eye. How to speed up laptop performance on Windows 10? We will talk about this a little lower.
Autoload
The biggest problem of any system of the Windows family. The fact is that some programs are placed at startup without the knowledge of the user and mercilessly "eat" system resources. At the same time, the owner of the laptop does not even use these programs. There is only one way out: remove unnecessary applications from startup. The most interesting thing is that even system applications load the computer well. For example, the useless One Drive hangs in startup all the time and "eats" the device's RAM. Arrange system startup - this is the first answer to the question of how to speed up the performance of a laptop on Windows 10.
To do this, you must first call the task manager with the key combination Ctrl, Alt, Del. There you need to go to the "Startup" tab. The manager will display a list of applications that start automatically at system startup. Many of them are not needed. But here you need to be careful, as you can disable hardware applications. And this is undesirable. In order to remove the program from autorun, you need to right-click on the application name and select "Disable" from the menu that appears. After disabling all programs, restart the laptop. Many have asked about having Windows 10 on a laptop. This method also helps in this case.
Disabling unnecessary services
The problem with Windows is that it has a bunch of services running by default that won't even be used. And they meanwhile use system resources. Disabling unused components is another answer to the question of how to speed up the startup of a laptop on Windows 10. But here you need to be extremely careful, as some services are necessary for the operating system to work stably. You need to know what can be turned off and what is better not to touch. But first you need to look at the list of services. To do this, go to the "Control Panel", the item "Administration", the sub-item "Services". All services will be displayed in the window that appears. Even disabled ones.
You can painlessly disable the search service, tablet PC input, smart cards, Windows firewall and its defender (if you use a third-party antivirus), print manager (if there is no printer or MFP), update service (if you do not plan to update the system). But the latter is not recommended. The developer knowingly provides updates to the operating system. Many holes and vulnerabilities are closed there. Speed is also optimized. To disable a service, double-click on it, click the "Stop" button in the window that appears, and select the "Disabled" startup type. Then click on "OK". Such procedures are also useful for low-power laptops. Thus, the answer to the question of how to speed up Windows 10 on a weak laptop is also available.
Disabling graphic effects
"Ten" is a very beautiful system. But all the graphic bells and whistles require a fair amount of RAM and graphics card power. For reasons of practicality, it is better to turn off all the "beautiful". By doing this, you can immediately notice how much better the computer will think. Asked about how to speed up a laptop on Windows 10? Disable graphical bells and whistles and your laptop will be much faster.
To disable it, just right-click on the "This PC" icon, select "Properties", and in the window that appears, select "Advanced system settings". Here it will be enough to check the item "Ensure the best performance". All graphic effects will be removed instantly. This will allow the computer to direct all its power to the operation of programs, and not to an attractive appearance.
Start menu
In the "ten" a kind of "Start" menu. It integrates applications in the form of live tiles. Many users do not need all these "stray" for nothing. And they consume computer resources and slow down the system. But they can be turned off. Although, in principle, it is not necessary to do this. It is enough to remove them from the menu. If you suddenly need them, then finding them will not be difficult. In the Start menu, they are always in the list of installed programs. This is another answer to the question of how to speed up a laptop on Windows 10.
In order to remove "live tiles" from the "Start" menu, just right-click on the desired tile and select "Unpin" in the window that appears. For some applications, the "Uninstall" option will also be available. If you do not plan to use this program in the future, then you can safely delete it. It won't get any worse. After removing all tile applications, the Start menu will open faster, and the overall performance of the operating system will improve.
Spy "chips"
It has long been no secret to anyone that the "top ten" closely monitors all user actions and sends all information to Microsoft. But how this company uses this information is a big question. But it's not that. The fact is that all these options slow down the system and make the laptop run slower. Accordingly, you need to disable all tracking services. This is another answer to the question of how to speed up a laptop on Windows 10. How to disable spy options? Very simple.
The easiest way is to use Ashampoo AntiSpy. It will automatically disable all unnecessary options. But it's better to do everything by hand. You need to open the "Settings", the item "Privacy". On the General tab, disable everything except SmartScreen services. In the "Reviews and diagnostics" tab, select "Never" in the feedback generation section. The remaining tabs allow applications to use the laptop's microphone and camera. This is also disabled. It will also be a good idea to turn off applications running in the corresponding tab. And finally, go to the "Control Panel", "Administration", "Services" and turn off the "Diagnostic Research Service". It is she who is responsible for collecting information and sending it to Microsoft.
Driver update
"Ten" is able to install drivers for all devices "out of the box". But not all of them work adequately. This can also be the cause of brakes and glitches. This is especially true for Wi-Fi drivers. Replacing these drivers is the answer to the question of how to speed up the Internet on a Windows 10 laptop. In order to check which driver is installed, just open the device manager, right-click on the hardware name and select "Properties". If the Microsoft inscription is visible somewhere, then it is better to replace such a driver.
You can find the necessary drivers on the official website of the laptop manufacturer or its individual components. It usually contains the latest products for all devices. It remains only to download and install. After installing all the necessary drivers, you must restart the computer for the changes to take effect. After all these manipulations, the performance of the laptop will increase slightly.
Use of specialized programs
This is another answer to the question of how to speed up a laptop on Windows 10. But using all this software without understanding is not recommended. The fact is that in automatic mode, these utilities can mess up a lot, and the performance of the operating system will only worsen. The best programs are CCleaner and AusLogics BoostSpeed. They work most adequately with the options of the operating system. But they do not always do well with the "ten". It's just that these utilities are not optimized for this OS.
It is also not recommended to use such programs because they "settle" in startup. And instead of an increase in productivity, one loss is obtained. And nobody needs this. It's better to do everything manually. Then the system will work as expected.
What Not to Do
Services that are vital to the operating system cannot be disabled. Without them, the system may refuse to work at all. It is also better not to touch system processes in the task manager. This may cause the OS to fail. Do not poke around in the system registry. Out of ignorance, you can do such things there that later the programmers will not figure it out. Also, don't disable the swap file. Some programs won't run at all without it. This is especially true for laptops, as they do not have much RAM. Don't defragment your SSD either. First, he doesn't need it. And secondly, he will not live long if he is defragmented.
Conclusion
Now you know everything about how to speed up a Windows 10 laptop. There are many ways to do this. But the use of specialized software products is not recommended. It is better to do everything manually with a deep understanding of all processes. Then your laptop will work quickly and will always please with its performance in games and resource-intensive applications.
The Windows 10 Experience Index is missing from the Basic System Information window, which is why many users don't know where to look for this information in the new operating system. The function, of course, remained, but the system performance evaluation is called manually. Consider how you can display the computer performance index in Windows 10.
The performance index is a way of measuring the interaction between system components and software, which gives an idea of the speed of a PC. The score will range from one to 9.9 points. The OS evaluates the speed of each component in the computer and then displays the overall score, which is not an average score, but a measure of the performance of the slowest component.
The easiest way to perform most operations in a Windows environment is through the command line. With its help, forced testing of the system is launched, followed by a report on the results. This is done by executing a single command.
1. Run the command line with administrator privileges.
2. Run the winsat formal –restart clean command.
3. We are waiting for the result of its execution to be displayed.
The process will take a few minutes and is accompanied by information about running the current test.
For a more objective assessment, you must complete all resource-intensive applications.
4. Upon completion of the performance evaluation, close the program and go to the "Performance \ WinSAT \ DataStore" path, opening the "Windows" folder.
5. We find a file called “Formal.Assessment (Recent).WinSAT.xml”, where the test date and time are first and open it, for example, through an Internet browser, although any program for reading text documents is suitable for this (the same notebook).
6. Go to the "WinSPR" section using the search bar. All the necessary data is here.
- SystemScore - the overall system performance score calculated by the lowest score (essentially, the overall score will be equal to the performance score of the slowest component of the system).
- MemoryScore - RAM score.
- CpuScore - CPU speed.
- GraphicsScore - the speed of the video card in the Windows interface (2D graphics processing, video decoding).
- GamingScore - processing game scenes.
- DiskScore - a general assessment of the speed of data access on the hard drive.
That's all. You can check the speed of your computer, for example, when buying a device using the operating system itself, without resorting to extraneous utilities (they will be discussed in the last section).
Windows PowerShell
1. Run the PowerShell shell with system administrator privileges using the Windows 10 functional search.
2. In the system tool window that opens, enter the “winsat formal” command and execute it by entering.
3. While testing each of the key components of the computer, you need to wait a little. The process will take up to five minutes.
4. Open the Formal.Assessment (Recent).WinSAT.xml file located along the path Windows\Performance\WinSAT\DataStore\…. on the system volume.
5. We find the "WinSPR" section, as in the previous method, and get acquainted with the results.
A simpler and more readable option for displaying information about testing is to run the "Get-CimInstance Win32_WinSAT" command in a PowerShell window. An explanation of the values can be found at the end of the previous section.
WinSPRLevel is the overall performance index that was displayed in the System window in previous versions of Windows. It is also the lowest rated of all.
WinAero WEI Tool
A freely distributed portable utility that performs the same functions as the command line, but everything is wrapped in a beautiful graphical shell to make it easier for beginners to work and understand information. You can download the utility from the official resource at http://winaero.com/download.php?view.79. After unpacking the distribution, the program can be run.
If the index has been evaluated before, the application window will display the test results exported from the latest xml file (the most recent). If it is necessary to conduct a fresh test, click "Re-run the assessment" and wait for the testing to complete (resource-intensive applications should be completed first). At the end of the process, the results in the utility window will be updated. Administrator privileges are required to perform the action.
The result can be exported to a text file, sent by mail or via the messenger used on the computer, and you can also take a picture of the program window using its own means.
Not so long ago, the Windows 10 operating system got its start. Its main difference from previous versions will be that it will be the last one, although updates will not stop. As Microsoft announced in April 2017, the OS will continue to receive new updates in a timely manner approximately twice a year.
Despite the rapid development of the operating system, machines with installed Windows eventually become slower and slower, as they become clogged with all sorts of programs and files. If you use a computer or laptop running Windows 10, it is likely that you periodically visit the Internet resources in order to find all kinds of guides to speed up the operating system.
You may have found this information before, but it would be great to not only mention something new, but also combine this “new” with already known information so that you can always have a complete guide to improving the performance of your Windows PC at your fingertips.
How to speed up Windows 10
Method 1. Prevent programs from starting at system startup
Usually, most Windows users have a lot of applications on their computers that automatically start when the system is turned on. Basically, these are factory software installed by the manufacturer, and others, the autorun of which has not been canceled or it is included intentionally.
The decrease in performance is felt especially strongly when the computer starts, when it loads the desktop and at the same time tries to launch a lot of other applications. This significantly slows down the operation of the device, therefore, it is necessary to minimize the number of programs with autorun. You can turn off the auto-start feature with Task Manager.
If you are using Windows 7 or Windows XP, in this case, a good utility to disable autorun will be msconfig.
Useful articles
Method 2 Use fewer applications at a time, reduce the load on RAM (RAM) for better performance
Using multiple applications at the same time can increase your productivity if, say, you are a designer and need to open Adobe Photoshop with Adobe Illustrator at the same time, but this puts an extra load on your PC. In most cases, the processor (CPU) does not suffer as much as the RAM (RAM), since RAM is the main resource used.
Try launching the Task Manager and check the memory usage in the tab Performance > Memory. If statistics show that programs load RAM, you can easily track down the guilty software in the tab Processes, which will allow you to improve the performance of your Windows 10 device.
Note: Make sure you don't reset an important system process.
Filling the system memory accordingly leads to a slowdown in the computer. Adding more RAM is one of the options that can solve the problem of poor performance, but this will come at a cost. A less effective way to help a sluggish Windows 10 system may be to increase the size paging file.
How to change swap file? Below is a detailed instruction.
1. Follow the path My Computer > Properties.
2. Select Additional system settings.
3. In section Performance click Settings and go to the tab Additionally.
4. In section Virtual memory click Change.
5. Uncheck the Automatic paging file size management for all disks. Select the disk you are interested in and enable the function custom size. Set the initial and maximum file size. Click OK to save changes.
Note: If you have excess memory, say 16 GB, there is no need to increase the page file size. However, disabling it is not an option worth considering as the computer may run into certain issues in this case.
Method 3. Check if your operating system is corrupted
Corrupted data can cause your Windows 10 PC to run extremely slowly and, in the worst cases, even crash.
One of the easy ways to fix corrupted data on Windows 10 is to run the System File Checker utility. It is likely that you are already familiar with it if you have previously used it in an attempt to recover your hard drive or USB drive. Fixing such corrupted files can certainly speed up Windows 10.
How to start System File Checker(System File Checker) in Windows 10?
To do this, use the command line and, having opened it, enter the following command:
sfc /scannow
This process may take some time depending on the size of your hard drive. Alternative way to run the above tool: My Computer > Windows Drive > Properties > Tools. Now click Verify.
Method 4: Scan your PC for malware
This should be the most anticipated item you could see in our article on speeding up Windows 10. All kinds of computer viruses have been around for decades, and the fear of how they can affect the operating system has led Microsoft to include antivirus software in the list of basic programs; it is called Windows Defender.
It is likely that some application disguised as some system updater or something else may be hiding behind the poor performance of your Windows 10.
You need to regularly scan your computer for malware using Windows Defender or any other third-party antivirus software, which will not only speed up Windows 10, but also avoid a number of other annoying virus-related situations.
Method 5: Shutting down and restarting Windows is not even an option. This is a necessity
Unfortunately, some users neglect this rule and their personal computers can be in an active state all day long, even if their owner is already sleeping for the fifth hour, forgetting that his device also needs to “Shut down” or at least “Reboot”.
Keep in mind that your computer can survive several days without restarting or shutting down the system, but this is not advice at all and does not mean that you should always keep it in working order.
Restarting or shutting down the computer at certain intervals allows it to clean up system memory, which in turn is gradually consumed during operation, and kills all erroneous processes that opened automatically or due to a problem with the launch of any of your programs, which allows you to speed up your Windows computer 10.
Method 6: Prefer sleep mode on your PC
If you put the computer into sleep mode, it will take much less time to turn it on than if you start the system from a disabled state. This is due to the fact that the current state of the system, from the moment you last worked with it, is stored on the hard disk and loaded again when the device is started.
Let your PC sleep for a while.
Putting your computer to sleep is a common thing for any Mac user, as these devices are able to survive almost a month working in this manner. Now Windows users can use this mode more confidently by keeping their computer in sleep mode for long hours.
At the moment when sleep mode is active on your PC, only RAM (RAM) continues to do its full work. It will be important to note that even though hibernation puts the computer into a rest state, it still consumes a certain amount of battery power, albeit in small amounts. Thus, although it is energy-intensive, sleep mode allows you to speed up the system to a certain extent.
Method 7: Make your Windows as ugly as possible
Eliminate animations and all special effects.
Our modern PCs have an operating system in which the developers have tried to make everything look great, be filled with various animations and effects, because this makes the process of working with the device much more pleasant. All good things usually have another side - these visual improvements consume system resources sometimes more than we would like. Not all PCs have enough powerful components to allow efficient operation while maintaining all the visual amenities on the screen.
Sometimes it happens that users do not use their device properly; they install random apps and make a number of other mistakes that make their computer suffer.
Now let's see how to enable or disable animations in Windows 10?
In the settings, you can easily switch to the best performance mode by turning off all animations. Follow the path below:
My computer(right click on the icon) > Properties > Advanced system settings > Settings(in section Performance).
In the window Performance Options select item Ensure the best performance. If it doesn't suit you, you can always ask Custom settings and enable/disable certain effects as you wish.
Turn off transparency.
Having a taskbar, a beautiful start menu, and a transparent action center can be pleasing to your eyes, but as you know, beauty requires sacrifice and, in this case, you have to pay the price of your computer resources. You can disable transparency by visiting Settings > Personalization > Colors. Click the switch in favor "Switch off" next to point "Transparency Effects".
Method 8: Make sure Windows always gets the latest updates
There are a lot of updates in the Windows working environment and new fixes are released with a certain frequency, which can be installed either independently or voluntarily when the operating system itself starts installing them. Keep in mind that keeping your PC up to date can improve the performance of Windows 10 in addition to protecting your device from unwanted threats such as newly discovered vulnerabilities by Microsoft.
Starting with Windows 8, Microsoft began to provide generic drivers for a huge amount of third party hardware. Updates for these devices are delivered through Windows Update. In case one of the third party devices does not support the driver provided by Microsoft, you will have to update everything manually.
If you're running the latest versions of Windows 10, updates will install much faster than they used to. The changes are due to the fact that Microsoft has optimized the process of updating the operating system and now most of the installation takes place in the background while the user goes about his business.
Method 9: Quick Launch Applications
This is one way to speed up Windows 10 in daily use. You can set your own keyboard shortcuts to launch applications in 1 click without having to search for them on the device.
Method 10: Prioritize Your PC
In the same performance window that we mentioned just above in point 7, go to the Advanced tab. There you can determine what exactly your computer will give priority to: programs that are actively used or services running in the background. This setting will help to significantly improve system performance according to your needs.
Method 11: Turn off cloud sync to speed up Windows 10
Windows 10 offers integrated support for the Microsoft OneDrive cloud storage service. You can save absolutely any data by simply uploading it to the cloud, where it will be safe even if for some reason the hard drive stops working prematurely due to a physical problem. Many users already have their own storage in Google Drive; there is a possibility that they will not be able to use the cloud from Microsoft.
If you prefer OneDrive and have sync turned on, don't forget about it. It will definitely consume the resources of your computer and slow down Windows 10. In fact, this may concern not only OneDrive, but also a number of other services.
To turn off OneDrive sync and speed up Windows, go to My Computer > OneDrive(right click on it) > Select storage folders to sync. In the next window, uncheck Sync all files and folders to OneDrive and press OK.
Method 12Use Fast Startup to Reduce Your Computer's Boot Time
One way to speed up the Windows 10 startup process is to enable the sleep mode feature, which is disabled by default. Fast startup (enabled by default) is another feature that reduces the startup time of the operating system.
You can check if fast startup is enabled on your computer by selecting Power Options > What the Power Buttons Do. Click Change settings that are currently unavailable to unlock the shutdown configuration. There you will see an option to enable or disable the Quick Launch feature.
Method 13Use ReadyBoost to improve Windows 10 performance
ReadyBoost is a Windows feature that can increase the speed of your system by using free space, the so-called caching. You can see a noticeable difference in system performance in a positive way, especially if you are using low-quality hardware. Keep in mind, ReadyBoost does not work with SSDs as they are faster than normal USB drives.
Method 14Disable Live Tiles
For the first time Live Tiles was launched in Windows 8. This function in the Start menu or on the start screen provides the user with information about a particular application either from the Internet or from a local network. Unfortunately, like any other background service, it consumes computer resources, slows it down, and drains the battery.
Let's see how to disable Live Tiles in Windows 10 to increase system performance.
If you are using Windows 10 Pro, you can use the Group Policy Editor. Open in editor User Configuration > Administrative Templates > Start Menu and Taskbar > Disable Tile Notifications.
Otherwise, you will have to disable tiles for each application manually. Open the Start menu > right click on the pinned app's animated tile > More > Turn off live tiles.
Method 15Use High Performance Mode to Improve PC Performance
Mode High performance in power modes will allow you to get the most out of your computer. In this state, the processor can use its full potential.
Remember to plug in your charger when performing resource-intensive tasks.
Have you ever wondered why power users prefer desktops over laptops? One of the reasons is that they have a constant power supply, which greatly improves performance. In the case of a laptop, we recommend connecting the charger when you run games or use “heavy” software that takes up a lot of resources.
Method 16: Use the built-in troubleshooter
With the release of the Developer Update, Microsoft has provided users with a section for various Windows troubleshooting utilities. Visit Settings > Update & Security > Troubleshoot.
Here you will find options to fix errors related to Bluetooth, BSOD, audio, Windows Updates, keyboard and many other system hardware. Troubleshooting can make your Windows 10 PC run faster and without errors.
Method 17Improve app performance in Windows 10
If you're on the April Update, Windows 10 now has a new settings page that lets you customize advanced graphics settings for individual apps (both UWP and desktop). This can come in handy if you're running into performance issues with a particular application and blaming the computer, which isn't at all to blame.
open Settings > System > Display. Scroll down the window and select Graphics settings. On the next screen, select the desktop or UWP app you want to customize and click Add.
Now click on the application name and click Options. Here you can choose between different graphics settings such as Default, Power Saving and High Performance. The high performance setting allows the application to use the system's discrete GPU.
Method 18: Free up space on your system drive
The computer may run slowly due to a simple lack of physical memory on the hard drive. Make sure that there is enough free space on the system disk for the normal operation of the operating system. Free space must be at least 10% of the total volume of drive "C".
Free up space on the system working disk and clear the desktop of unnecessary items. Also, it will be much more useful in case of lack of space, reassign the user's document storage location to another logical partition. This will significantly unload the system disk.
You can move the following system user folders:
- Downloads
- The documents
- Images
- Video
- Music
Method 19: Disable third-party Antivirus application
Antivirus applications greatly affect PC performance. If you do not practice visiting unverified or suspicious Internet resources, then third-party antivirus can be disabled for the duration of any complex tasks. Use the built-in Windows 10 Defender - Windows Defender.
Method 20Repair your computer
If all the previous methods have been powerless to help you, the last option to resolve the issue of poor system performance is system rollback. You can do this by visiting the section Recovery in the Settings menu. Reinstalling Windows 10 will fix all the mistakes made, and you will be able to fully use the working operating system again.
If needed recover deleted files and folders, the recovery tools of Starus Recovery will help you. You can try and download data recovery programs for free from our Internet resource.
A nice translucent "Start" may well have an impact on system performance, especially if you have an inexpensive laptop with a budget processor. Disabling transparency will free up some of the resources that can be directed to higher priority tasks.
To do this, you need to go to "Start" → "Settings" → "Personalization" → "Colors" and there turn the "Transparency Effects" switch to the "Off" position.
Animation effects, smooth scrolling and various shadows further affect system performance. You can disable all this with just one click.
To do this, open the "Control Panel" (it can be found through the search) and then follow the steps: "System and Security" → "System" → "Advanced system settings" → "Settings" on the "Advanced" tab. Now in the "Visual Effects" section, you need to check "Ensure the best performance."
In the same place, you can simply uncheck the least important effects for you, leaving only the ones you need.
If you don't use Live Tiles in your Start menu, you can opt out of them entirely, as they also use up resources. To clear the "Start", leaving only the list of programs, you need to unpin all the tiles one by one. To do this, right-click on each and select "Unpin from Start Screen".
Notifications from applications and other senders can load the system the first time certain programs are launched, and especially . To turn off all annoying Windows 10 notifications, go to "Start" → "Settings" → "System" → "Notifications and actions" and there turn the top switch to the "Off" position.
Unloading system resources will also allow the rejection of Windows tips, hints and recommendations. You can turn off such assistance in the same section of the parameters just below.
And removing garbage from memory must be done systematically. This is a mandatory procedure to maintain a high level of system performance, especially when there is a shortage of free hard disk space.
Cleaning can be done with third-party programs, such as, or using a standard utility. To launch the latter, you can simply type "Disk Cleanup" in the Windows search and open the proposed option. Next, you only need to note what can be deleted.
If, when you turn on the PC, the system boots for a long time and even after the desktop appears, it continues to think about something, you should check the list of programs in startup. It is likely that there is something that can be removed, facilitating the initial launch.
To do this, open the "Task Manager" with the combination Ctrl + Alt + Del or Ctrl + Shift + Esc, then go to the "Startup" tab. To identify the heaviest components, you can sort the list by the Startup Impact column. It remains to select programs and disable them.
Windows 10 provides a standard tool for finding and fixing problems. With it, it is quite possible to fix some pop-up errors that slow down the entire system.
You can go to such a debugger through "Settings" → "Update and Security" → "Troubleshooting". In the window that opens, start the scan from any section where there were any errors.
If you do not have a top-end computer with the most powerful hardware, it is worth lowering the protection level of yours by prohibiting it from performing a systematic check of PC memory. You can also search for potential threats manually when the computer is not performing other tasks.
Two antiviruses installed on a PC for maximum reliability can exert a particularly high load on the system. Make a choice in favor of one remedy and discard the less useful one.
Windows 10 by default monitors some user actions and sends reports to Microsoft. These background activities cannot but consume system resources, which is especially noticeable on weak computers.
Such surveillance is disabled in the privacy section in the system settings. There you need to turn off the first three functions in the “General” subsection, and also select the main amount of data to send and the frequency of generating feedback “Never” in the “Reviews and diagnostics” subsection.
In the case of laptops, the selected power management scheme can also affect system performance. When operating from the mains, a scheme with high or at least balanced performance should always be selected. The Energy Saver option is designed for offline use of the notebook when it is important to use battery power as efficiently as possible.
You can go to power management through "Control Panel" → "System and Security" → "Power Options".
