Description of the problem: Problem with new software. Receiver GS 8306B. Receiver software version 1.9, 160. CAS module software version: 4.0, 62.35_r. After updating the receiver, some problems arise, namely: when the receiver is turned on (into a 220V socket, turned on from the remote control), a picture appears with a pink tint, if off. incl. then the problem disappears. The same problem after switching on occurs with the sound, that is, there is no sound, and also after the receiver is switched off and on again, the problem disappears. Following. There is a refrigerator in the room, the work of the refrigerator is so arranged that it periodically turns on and off, but when a device is turned on, an energy surge occurs. In this case, the sound is muted, and the problem is again solved only after the receiver is turned off and on again. It's clear that you need to purchase a stabilizer, but I want to note that the equipment has been working for about three years without a stabilizer (why pay more if the old software did not have such problems. Next. After clicking on the Menu button, a list appears: Application; Search for tricolor TV; Status and so on; also after turning on the receiver for the first time and then turning on the Menu button, the ability to go to any tab (for example, "status") is not possible, the bullets simply do not respond, only to turn the receiver on and off, and how the problem always disappears. Next. Previously, on the old software, after entering any application, be it settings or the channel list, the panel disappeared if it was not used. But now the splash screen just appears. And only after pressing the remote control again, the splash screen disappears. Why is this? it was so convenient (It was also convenient when the entire menu panel or the channel list could be configured so that it would be transparent in a% ratio. that it became impossible. This is all I could notice so far. So the moral of this fable is that our new software is not stable. And I wrote this message so that you would listen, and fix the shortcomings and maybe finalize some of the nuances and settings. Thank you for attention! To which I received an answer. Hello, Valentina Dorzhievna. Thank you for contacting Tricolor TV. this moment there is no information about any failures in the provision of Tricolor TV services. Your appeal has been registered and will be forwarded to specialists technical service for check. We recommend checking the situation later in the day. All information about services, their validity periods, account status, answers to technical questions, you can specify yourself in your personal account, as well as repeat the activation commands. Login page to your personal account - https: //lk-subscr.tricolor. tv / # Login. The login to enter your personal account is the ID number of your receiver. To receive a password from personal account, you must follow the link: https: //lk-subscr.tricolor. tv / # Login ?, then select "Get password", enter either the ID number or the number subscription agreement and choose the most convenient way to receive a password: by SMS or email. Please note that you can also get information and technical support at help.tricolor. tv. The site is accessible from mobile and stationary devices. Respectfully yours, Elizaveta NechaevaSpecialist of the Tricolor TV subscriber support service.
Tricolor TV is one of the most large operators satellite TV v Russian Federation... In addition to providing wide range services for the provision of television broadcasting, the Internet, the company is a distributor of equipment of its own production. Any technique, even the most High Quality, may be damaged due to wrong setting, operation, breakdown of components. The remote control is no exception. remote control(Remote control) Tricolor, in case of a breakdown of which the subscriber has to think about how to change or repair it.
Checking the remote
To check the operation of the remote control, you need to take a smartphone (turn on the "Camera" function), a camera or a video camera, point the remote control at the photographing device and press any button. If the device is in good working order, the flash of the LED will be visible through the camera lens. In this case, it is necessary to check the receiver itself for possible damage or incorrect connection.
The absence of flashes indicates that the Tricolor TV remote control is broken and something needs to be done to repair it.
Battery change required
The most elementary and common reason why the Tricolor receiver does not respond to the remote control is discharged batteries. The solution to the problem is to replace them.
Sometimes, opening the cover of the battery compartment, you can see that the batteries "leaked" and the power contacts are covered with rust. In this case, they get rid of the rust by cleaning the contacts and wiping them with alcohol.
Contamination of the remote control
During operation, liquid may get inside the remote control or it may become contaminated from frequent contact with human hands. The buttons gradually get dirty, the fat layer prevents the graphic coating and the rubber base from contacting normally with the buttons. As a consequence, it is necessary to apply force when pressing the button to switch.
To fix the problem, you need to learn how to disassemble the Tricolor remote control. First of all, you should get the batteries to prevent accidental activation of the receiver. If the halves just snap into place, then it is enough to open them using a screwdriver or any other thin object. When connecting parts with bolts, unscrew them with a screwdriver.
To clean the board, use a cotton swab dipped in alcohol (not cologne!). All parts, except for the board, must be washed with a brush and soapy water, dried thoroughly and assembled. If water gets into the device, it must be opened and dried.
Mechanical damage to parts
The remote control can be negatively affected mechanical damage received as a result of falling or striking hard objects. Therefore, if the remote control from the Tricolor console does not work, you should check its weak points.
Most often, the battery contacts on the board suffer from this. In case of blows, the soldering is destroyed and the contacts "go away". To eliminate the breakage, it is enough to solder them well. Another weak element is the infrared diode, which also disappears at the soldering points.
After a fall, quartz 455 kHz can also break off at the soldering point or break. It can be purchased at specialized radio stores or on radio markets.
The most severe breakdown is a board crack. It can not always be seen when visual inspection... Cracked copper tracks can be repaired by soldering. If the coal paths are cracked, then they cannot be restored.
Remote does not work after software update
Updating the software allows the subscriber to receive more quality reception TV channels, while often increasing the possibility of an extended search for TV broadcasting channels, and, consequently, their number.
Sometimes the Tricolor prefix does not respond to the remote control due to the loading of new software. In this case, it is necessary to follow the given algorithm:
- it is necessary to simultaneously press the buttons "TV / RADIO" and "CHANNEL +", which are located on the receiver;
- press the STANDBY button.
If the malfunction of the remote control was associated specifically with the installation new version Software, then after performing these actions normal work will be resumed.
The device is in special modes
If the Tricolor receiver does not respond to the remote control, which is in working condition, you should check the mode of its operation.
To avoid accidentally switching channels or other unwanted actions For example, by a child, the remote control can be protected by switching on "Standby mode". To return to the operating mode, press the STANDBY button.
There is also a button that is responsible for the "HDMI" mode. It is used when connecting special cable for this regime... Provided that the cable is not connected and the button is accidentally pressed, the Tricolor remote control will not switch channels. To cancel this mode, simply press the indicated button a second time.
Operation of the Tricolor set without a remote control
It is not possible to turn on and use the Tricolor equipment without a receiver remote control, since the remote control from the TV in in this case used only to turn it on and off.
You can switch Tricolor TV channels, use other necessary functions of the equipment, only with the help of the receiver and the supplied remote control.
If the Tricolor TV remote control stops working, the user has several ways to solve the problem. You can try to deal with the problem yourself by replacing batteries or faulty parts, cleaning. If the Tricolor remote control does not respond to the tuner in case of problems with software, you can contact your authorized dealer at telephone mode or personally and try to fix the problem. If all of the above actions did not lead to success, it becomes necessary to purchase a new remote control.
V Lately more and more often, the company's clients in Kirov, after purchasing and installing a set of satellite television Tricolor in Kirov and connecting to the Tricolor operator, began to ask one single question about the operation of the brand's receiver: “What should I do, I do not have a picture on the TV screen, but the GS 8306 HD Tricolor is working and responds by signaling the indicator when you press the keys on the control panel? ".
For help in solving the problem, you can contact our company Kirovsat in Kirov, or figure it out on your own by reading the article below.
In order to get out of this situation, we will plunge into the technical part of the GS 8306 HD Tricolor receiver and determine its main modes of operation, having studied which you can easily determine what manipulations need to be done in order to enjoy watching channels again using the GS 8306 HD Tricolor receiver.
And so, the GS 8306 HD Tricolor receiver is technically complex device, to start working with which, it is advisable to study the attached to the kit satellite equipment.
As you noticed, flip side receiver GS 8306 HD Tricolor has 2 outputs: RCA output "tulip" and HDMI, to switch between which, on the receiver's remote control, there is an "input" button located in the upper left part of the remote control.
Some users of GS 8306 HD Tricolor receivers connected to a TV via RCA or HDMI output, when switching channels, the "input signal" button is mistakenly pressed, as a result of which the GS 8306 HD Tricolor receiver switches to another output and the image on the TV disappears.
As a rule, older people start to panic and in order to return the receiver to normal mode work, they begin to sort out all the keys on the remote control of the GS 8306 HD Tricolor receiver, which, of course, does not lead to desired result... There are also subscribers of the Tricolor operator who, in such a situation, carry their satellite receiver GS 8306 HD Tricolor in one of service centers located in the city of Kirov and other regions of Russia.
In this situation, we would advise you not to rush and not blame our company Kirovsat in Kirov for selling, as it seems at first glance, low-quality goods, but carefully look at the operating mode of the indicator light, which is located on the left, on the front panel of the receiver and illuminates the power button on the GS 8306 HD Tricolor receiver.
Next, there will be a list of the operating modes of the indicator light of the GS 8306 HD Tricolor receiver with a decoding of the operating mode in which the receiver is located and the options for your actions to bring the receiver to working condition:
1. The indicator light is off- the receiver is turned off (to turn it on, press the "on" button on the front panel of the receiver)
2. The indicator light flashes alternately- the receiver is turned off, in standby mode (to turn it on, press the "on" button on the receiver's remote control)
3. On indicator light one upper light is on- the receiver is turned on, the signal is taken from the RCA output "tulips" (to switch to HDMI output, press the "input signal" button once)
4. The indicator light is on completely (not flashing)- the receiver is on, waiting for switching between the RCA and HDMI outputs (do not press anything, wait until one of the lights is on: top or bottom)
5. On the indicator light, one bottom light is on- the receiver is turned on, the signal is taken from the HDMI output (to switch to RCA output, press the "input" button once)
If both indicators on your receiver are on long time and the GS 8306 receiver does not react in any way to the remote control, the first step is to turn off the receiver from the power supply for 2-3 minutes. If the problem persists after turning on, try flashing the receiver with external USB drive. How to do this is described in the article " GS 8306 Tricolor Firmware Update" .
Thus, you have familiarized yourself with all the operating modes of the GS 8306 HD Tricolor receiver, and we hope that a small note from our Kirovsat company in Kirov will help you eliminate cases of worries about the performance of your receiver.
Question answer
Question: How much do you have for Tricolor TV?
Answer: A set of equipment for watching Tricolor TV channels with a new GS 8307 Full HD receiver costs 7900 rubles. This equipment allows you to receive more than 170 channels. Of course, the price of the first year of viewing is included in the package price. If you want to watch even more - buy additional packages operator Tricolor TV. Price standard installation- 1000 rubles.
Question: Where can I buy a Tricolor kit in Kirov and order an installation?
Answer: Call Kirovsat phone numbers 44-13-50, 8-912-734-13-50 and tell us about the model of satellite equipment that you decided to install and the installation address. Choose the most convenient delivery and installation time for you. After installing and configuring the equipment - pay the amount for the installation and the cost of the equipment.
Question: What do customers most often choose now?
Answer: Most often, you have to put Tricolor and Telecard.
Question: My old antenna was blown away by the wind, wires were cut, cost new setting and the installation will be the same - 1000 rubles?
Answer: No, you will have to pay much less to restore normal viewing of channels. We offer significant discounts to customers whose antennas are already installed.
Question: I do not know if it is possible to install the antenna near the balcony or window. Is there a satellite signal?
Answer: Contact us and name the exact address indicating where the windows go. In most cases, this is possible.
To watch TV channels HDTV, " Tricolor»Advises satellite receiver tricolor tv hd GS-8306... With the use of this satellite receiver it is possible to watch TV channels as in SD quality ( standard definition) and HD quality (high definition television - HDTV) - the "Maximum HD" package. This model supports a complete set of services required for viewing channels of both standards. Satellite HD receiver can be connected to various types of TVs and displays. In this short description, we will outline how to connect GS 8306 without the help of a professional.
You can always buy a set of Tricolor TV in Murmansk, or the receiver separately, get free consultation, in our office, by calling the phones in Murmansk 750-335 or 236-335 ... By purchasing Tricolor TV equipment, you have the opportunity to watch 10 channels on your LCD TV excellent quality- HDTV (high definition format). You can get more comprehensive information about Tricolor TV Full HD equipment on our website >>>.
In the set of equipment Tricolor TV HD- for viewing HDTV channels - "Tricolor TV Full HD" together with a receiver, satellite dish and a converter, in addition, the cost of a one-year subscription to the "Tricolor Maximum HD" package is included, and after a year of viewing, subscriber. the fee will be only 900 rubles. At the moment, the Tricolor Maximum HD package includes 25 channels in HD quality and more than 100 channels in SD quality, the packages are constantly updated with new TV channels.
At first glance at the receiver General Satellite GS-8306 we can note its modest dimensions. Its dimensions are only 250x180x44 mm. Rounded corners, the body is silver or black, in this case the question arises: how can satellite TV fit in this small but nice-looking device?
On the external panel The GS-8306 satellite receiver has 5 buttons: one power button and 2 each - for switching TV and radio channels and changing the volume, respectively, and in addition a functioning indicator. On the side there is a card capture slot. On the rear panel there is an optimized configuration of connectors for connecting to audio / video equipment.
The rear panel of the GS 8306 consists of:
Input for connecting a coaxial cable from satellite dish- LNB IN
- output LNB OUT (loop output), for connecting the next receiver along the chain
- RCA inputs and outputs ("bells")
- HDMI output is the latest digital multimedia interface
- USB port connector for flashing the satellite receiver
- Jack socket for connecting the power adapter
The first acquaintance has taken place. Let's get connected!
The set of Tricolor TV HD, necessary for viewing HDTV channels, also includes a satellite dish and a converter circular polarization(LNB) to receive a signal from the Eutelsat 36 A / B satellite. The dish must be tuned to the required satellite, for the central part of Russia, this satellite Eutelsat 36 A / B 36 ° E etc.
The satellite converter is connected to the input of the satellite HD receiver - LNB IN via a coaxial cable. To catch satellite signal high quality, in coaxial cable there should be no damage and its length should not exceed 100 meters.
Now we connect the TV to the receiver... This can be done either through RCA outputs ("tulips"), or with via HDMI cable. If you have a wide-screen TV for viewing HD channels on modern flat-panel TVs, the optimal solution would be to connect the receiver with an HDMI cable.
Scanning TV channels
When the satellite receiver HD GS 8306 is turned on for the first time or after it has been reset to factory settings, the First Installation Wizard will start. The process of scanning TV channels consists of 3 easy stages:
Stage 1: you need to choose the menu language: Russian, Ukrainian or English
Stage 2: choosing a region
Stage 3: scanning of tricolor TV channels. The setup wizard will initialize this mode after specifying the region. Scanning TV channels takes no more than one minute, after which the satellite receiver switches to viewing mode. The numbering of TV and radio channels in the lists starts from channel zero. The "zero" line in the TV list is occupied by the "Tricolor TV info channel". Further there are HD channels of the Maximum HD package, then the channels of the Basic package, etc. At any time it is possible to set up a favorite list of tricolor TV channels, organizing them according to the groups you need only!
Note! Installing a satellite dish will require the utmost care. When incorrect installation satellite dish there may be malfunctions or equipment failure due to factors beyond the control of the equipment seller. In case you are not completely sure that you will be able to mount the equipment yourself.
You can always order from our company (tel .: 750335,236335) a service for installing and configuring a satellite dish both in Murmansk and in the Murmansk region.
