Viewing images from an iPhone to a Samsung TV. How can you connect an iPhone to a TV

In this article, we will consider options for how to connect an Android phone or an iPhone to a TV: what are the ways and how to use them.

Modern smartphones have many useful features... It is worth recognizing that these gadgets have become an inseparable part of existence. modern man... Watching videos, surfing the Internet, playing games - this is just a small list of what you can do with your mobile phone. The only disappointment is the screen size. Despite the abundance of the market where models with large display, they cannot provide the completeness of the picture when viewing the content.

The solution will be to connect the smartphone to a larger screen. Excellent for the plan TV will do... There are many ways to connect - both wireless and cable. It is enough that the TV supports at least one protocol suitable for connecting to a mobile phone.

How to connect your phone to a TV using Wi-Fi Direct and Miracast

Wi-Fi Direct

Many modern TVs have a built-in Wi-Fi module. This allows you to watch videos online, surf the Internet, download special content from the manufacturer. Additionally, the technology is built into the TV firmware Wi-Fi Direct... The protocol is supported by almost all smartphones (with the exception of models that run on the first Android versions). The essence of technology is connection various devices without availability. During communication, the smartphone is recognized not as a storage device (flash drive), but as a multimedia center.

Here are the instructions for connecting (depending on the phone / TV model, the names of certain menu items, their locations may vary).

• First of all, enable Wi-Fi Direct through the menu of the mobile device. On all operating systems, this can be done through the settings for wireless connections (connections).
• Next step- enable the same function on TV. This is done through the network settings. If the corresponding menu item could not be found, refer to the instructions for the device.
• Now that Wi-Fi Direct is enabled on both gadgets, all that remains is in the TV menu to select among available devices smartphone then enjoy mobile content on the big screen.

Wi-Fi Miracast

Advanced technology over Wi-Fi Direct. But it is supported by fewer gadgets. Here, as in the previous method, the devices are connected without an access point.

Key benefits of Miracast:

• Improved quality of transmission of volumetric content. Convenient when watching movies - the picture does not slow down, there is no desynchronization, no downloads.
• Protection of the connection from the interference of third parties. Now you don't have to worry about the content mobile phone will become available to a wide range of people.
• Interchangeability of screens. You can watch TV content on your phone.
• The ability to broadcast surround sound and 3D.
• Save phone battery power.

Connection instructions.

• Turn on Wi-Fi Miracast in the TV network settings.
• On the smartphone, go to the "Screen" ("Display") section, where we select TV.

There is a similar technology - Intel WiDi... It can be used if Miracast is not available. There is almost no difference between these protocols, and the connection is carried out in the same way.

Manufacturing technologies

Connections via Intel WiDi, Wi-Fi Miracast, Wi-Fi Direct are the most convenient. But some manufacturers have taken it one step further by introducing standards specifically tailored for communication between devices of the same brand.

So, to connect gadgets from Samsung, you need to enable the AllShare function on both devices.

List of manufacturers and connection name of devices of the same brand:

• LG - Smart Share.
• Apple TV - AirPlay.
• Sony - VAIO Media Server.

The manufacturer's protocols have some improvements in contrast to the standard ones. This is the ability to use your smartphone as a remote control, convert video / audio to a format that TV supports, and much more.

HDMI, MHL and SlimPort - we connect the phone to the TV via a wire

HDMI

A very easy way if your smartphone has a micro / mini HDMI connector. In the absence of such, you will have to buy an appropriate adapter. Sold in any store electronic technology- is inexpensive.

Connection procedure.

• Turn off both devices.
• We connect gadgets with a cable.
• We turn on the TV and telephone.
• In the TV menu, select the HDMI port to which the smartphone is connected.

Connecting via HDMI is easy, but it has its drawbacks. The most significant of them is fast discharge phone battery. Therefore, you will have to keep it constantly connected to the network. alternating current... And this is not always convenient - there are times when the distance from HDMI port the TV and the socket are too large to reach the charging cord.

MHL

A more advanced protocol for connecting the phone to the TV via special cable(or adapter) USB and HDMI ports. MHL - the adapter provides power to the devices with which it works (there is no need to additionally charge the smartphone battery). In addition, the content transfer rate and its quality are significantly higher than that of HDMI.

There are two types of MHL - passive, active. The second requires auxiliary power. Why does the adapter have additional USB-the connector through which it is connected to the TV.

To use a passive device, both gadgets must support the MHL protocol. The active does not have this. It is enough for him that only the receiver (TV) has MHL.

The MHL connection process is identical to HDMI.

SlimPort

Another new idea to combine the phone and TV into a single organism. It is carried out by connecting a special adapter via the USB connector of the phone and HDMI, DisplayPort, VGA, DVI of the TV. This is where the advantages of SlimPort relative to MHL end. Further cons. The SlimPort adapter does not recharge the smartphone's battery (although there is an additional USB). The second drawback is that it can be used only when both devices support this technology, and there are few of them.

How to connect your phone to an old TV

For owners of advanced TVs, there are many options for connecting a smartphone. But what about those with older TV models? First of all, do not despair. There are not many ways to connect to the phone, but still.

Older TVs have multiple connectors. These can be Tulips (RCA), S-Video, Scart or VGA. And the phone output remains the same - USB. To combine two devices with different interfaces you need an appropriate adapter:

• RCA-micro-USB.
• SCART-USB-micro-USB.
• S-Video-micro-USB.
• VGA-micro-USB.

If you have an iPad or iPhone and are looking for the best way to connect your iPhone to your home display, you've come to the right place! This article has everything you need to know about pairing your TV with Apple devices, mirroring or streaming your iPhone display to the high definition of your favorite TV.

The procedure for pairing multiple devices is very easy and even useful. For example, if you have iPad Pro with an ultra-large 12.9 inch display, you will get a lot more positive emotions from viewing photos and playing videos on a large TV screen than on a tablet.

Can I connect an iPhone to a TV via USB?

Perhaps the easiest way to get your iPhone to TV is to use a Lightning to HDMI adapter. Use USB adapter for pairing your smartphone with a TV is inappropriate, because most modern TVs have at least several HDMI ports for connecting external multimedia devices.

For example, at our studio, we managed to transfer an image from an iPhone to a Samsung TV using a Digital AV adapter, which you can purchase in various retail stores at a price of 3,690 rubles. Unfortunately, Banks' company currently does not manufacture adapters of this kind.

This little Prankster contains an HDMI port for connecting to a TV, a Lightning connector (out) for connecting your iPhone or iPad, and a bonus Lightning port (in) that lets you charge your device while pairing with a TV.

Using an AV adapter couldn't be easier:

1. Connect one end HDMI cable into the adapter port and the other end into a free TV port.

2. Connect the adapter to your device (iPhone or iPad).

3. If possible, additionally connect charging cable to the AV adapter.

Turn on your TV and make sure it is set to display information from the HDMI jack. To do this, carefully read the instructions for the device. On our Samsung, this is the "Source" button. After clicking on it, it pops up extra menu, with the choice of the source of information display. After you have selected the appropriate settings in the TV menu, appears on the TV monitor home screen iPhone or iPad.

Start playing a video or viewing a photo on your device. Current iPhone image disappears and the video plays in full resolution on the TV screen. In the case of the iPad, you will see information that indicates that the device is currently connected to your home TV.

Now you can go to the settings of the control center, and select the "Output" video in order for the specific content (information) from your iPhone to be sent to the TV.

How to display an image from an iPhone to a TV via Wi-Fi?

Another way to enjoy content from your iPhone on TV is with the Apple TV portable box.

To do this, of course, you will need the set-top box itself, which must be connected to the TV via the HDMI port, as well as to the wireless home wifi networks. Select the appropriate input on your TV and make sure the home screen appears. Apple screen TV.

Check the connection of your smartphone or tablet to the same network as the Apple set-top box.

1. Start playing the video, for example using a video YouTube apps or Safari browser etc.

2. Swipe down from the bottom of the device screen to open the control center.

3. Swipe "Left" and the second page will open. Select your Apple TV device.

4. Tap on the area of ​​the screen outside of the Control Center to exit the current settings.

5. Observe the AirPlay icon in applications. Some apps like BBC iPlayer have their own AirPlay icon... Just click on it and select a device for transferring media information (video streaming).

IPhone Screen Mirroring to Sony TV or Mirroring

Sometimes, you cannot watch streaming video from applications or the Internet on TV. AirPlay support is determined by software developers, unfortunately, not everyone uses this feature when creating applications or games.

In this case, you can work around this problem by using mirroring. By activating this function, you can transfer the entire iPad / iPhone screen in real time "Online". Just swipe up to expand the control center and select the AirPlay option to bring up the menu, then select AppleTV.

To play music on home device stored on iPhone, select the track, album, or playlist you want to listen to. Open Control Center again and activate AirPlay.

Apple TV offers you flexible customization for displaying information from your device on the TV screen without additional adapters. Better yet, there is no need to be near the TV all the time. Your gadget will only be connected to a Wi-Fi network.

How to connect an iPhone to a Samsung TV?

This method is only suitable for older Apple devices that have a 30-pin connector, as well as for TVs without HDMI ports. To pair the devices, use the combo AV adapter. Its principle of operation is similar to the digital Lightning AV adapter, except that you need to use the Tulip input on your TV instead of the HDMI port. Also make sure that any video you want to watch is SD, not HD. Buy AV cable for iPhone previous generations you can in most radio markets or retail stores for only 1990 rubles.

How do you connect your iPhone or iPad to your TV? Share your solution in the comments to this tutorial.

To protect your smartphone display from falling, we advise you to use the premium protective glass for iPhone 6 from the company Benks. Strained glass has rounded edges using 3D technology and covers the entire front surface of the device.

Details Benks Created: 29 May 2017 Updated: 03 February 2018

The development of technology does not stand still. When it began to appear on televisions operating system, this has significantly expanded the list of capabilities of this device. In addition to going online, downloading applications, installing games for TV, it became possible to synchronize TVs with their mobile devices. Now from the TV screen you can view photos and listen to music that is on your smartphone or tablet, which is much more comfortable to do on a large screen.

Let's consider how exactly you can watch videos from iPhone on TV.

Information can be transmitted to television wirelessly and wired using special applications and additional devices and set-top boxes.

Since video from iPhone on TV can be watched using several options. Let us dwell in more detail on each of the methods and determine their advantages and disadvantages.

Wireless via DLNA

DLNA technology allows compatible devices share various content by home network... If we translate the decryption of the abbreviation DLNA, we get the "alliance of home digital networks". Connecting devices using this technology can be both wired (ethernet) and wireless (WI-FI).

How to transfer from iPhone video to the TV using this technology. To transfer files to TV, consider wireless method... To do this, we need a WI-FI network, to which it will be possible to connect both a TV and an iPhone.

For LG TV equipment, you will need to install Smart program Share, and for Samsung - AllShare, for other models you also need to find out which software is suitable for these purposes.

For iPhone, you can download the Twonky Beam program. The app is free. It has a number of built-in services, with the help of which it is immediately possible to display the image on the TV. Including a built-in browser. When the application starts, you need to determine the device through which the file will be played.

There are also applications such as iMediaShare, TV Assist, Belkin MediaPlay. The principle of their work is similar.

If you plan to frequently use data transmission on TV, then it is better to download once paid program to ensure full functionality and no advertising. When you start the application, you will need to select a TV from the list and you can start transferring content.

If the TV does not have a WI-FI module or it is not compatible with iPhone applications, you can use a transmitter that connects to television device across HDMI input, but receives a signal from the phone wirelessly.

You can install the AirBEAM TV app on your TV and transfer data by turning on the AirPlay function on your iPhone. But this software is not suitable for all TVs, so first you need to use trial version(since the application is paid) to check the compatibility with your TV.

For example, let's take a look at how to use the connection option for a Samsung TV.

1. Turn on the TV and connect to your home WI-FI network.
2. On iPhone, launch AirPlay and select a TV from the resulting list of devices.
3. Now the phone screen will be mirrored on the TV.

DLNA advantages and disadvantages:

• Except in rare cases, no additional equipment is required;
• Need special applications to connect both devices;
• Data transfer speed may not be very high due to limited bandwidth(this applies to the wireless connection);
• The emergence of new video formats may not be readable on TV.

Another option is to use Wi-Fi Direct technology. V in this case transmission will be carried out directly from one device to another without using a router.

To use technologyWi-FiDirect, you need both television and mobile device supported her

You need to perform the following actions:

• Find the menu on iPhone « Wireless networks and connections "-> "Wi-Fi Direct" -> "Activate";
• Find on TV equipment "Net"-> "Wi-Fi Direct";
• Select your iPhone from the list and send a connection request.

HDMI, or composite connector

Any modern TV has one or more HDMI ports. This technology allows you to transfer high quality video data at high speed.

It is possible to display the image from the iPhone by directly connecting the cable between the phone and the HDMI TV port. In this case, it is even possible to show videos in high quality without delay. And it's available to everyone Smart TVs TV and conventional, with the corresponding connector regardless of the model: LG, Samsung, Sony, etc.

You don't need to install additional software, but you need to connect the Apple Lightning port (or for earlier models - 30-pin) and HDMI / VGA. But, accordingly, you need to purchase AV- Apple cable and Lightning Digital AV adapter.

For this:

• Devices are disconnected;
• We connect the cable to HDMI port on TV and the other to AV adapter;
• We connect the adapter to the iPhone;
• Now you need to turn on both devices;
• After switching on, the required connection should appear automatically.

If automatic installation did not happen, then you manually do this. On the iPhone, in the settings, activate the transfer viaHDMI, and on TV select the signal as the sourceHDMI, which is involved (if there are several ports)

Of the shortcomings, it can be noted that a special wire and adapter are needed to connect, fortunately, the market offers many different options... And the presence of a wire reduces the comfort of use in this way.

If there is no way to connect to HDMI, you can use composite connector(otherwise called "tulip") and Apple's Lightning VGA adapter. This option is suitable if your TV has an analog input.

The sequence of actions is as follows:

1. Connect the adapter to the iPhone.
2. Connect the cable to the TV (each plug must be inserted into the corresponding jack). In a VGA cable, the audio input is connected separately.
3. After connecting the devices, the settings should be loaded automatically. If this does not happen, you will need to perform a manual configuration.
4. Turn on the TV to the required input signal. To do this, in the TV settings, the iPhone is selected as the signal source.
5. You can now play videos on your phone. Moreover, on earlier iPhone models, only programs that reproduce media content will be displayed, and in later models, the screen will be duplicated.

Composite and 30-pin connector does not support data transfer in the formatFullHD

USB cable

This method is suitable only for viewing photos and images, as well as videos that are stored in the menu "Files" on the phone. In this case, the phone will act as a storage disk and there will be no screen mirroring. To connect, just connect the cable from the iPhone to the Lightning connector of the phone and to USB port on TV.

It is better to disconnect the device before connecting.

How can you display a video from an iPhone in this case and can you watch a movie?

It is possible to perform a Jailbreak - a process that allows you to access file system"Operating systems". In fact, this is a firmware hack. Such applications can be downloaded from unofficial stores.

Jailbreak significantly expands the functionality of iPhones, but a device with such plugins is not subject warranty service and cannot upgrade to a newer version.

Using an Apple TV box

Apple TV is a device designed to transfer data to the TV screen from Internet services, iTunes, any Apple devices: players, computers, smartphones and tablets.

Apple TV provides access to all kinds of video and audio resources, and if you don't have a Smart TV, then it will give it the functionality of such.

This prefix - small device which transfers data to streaming, that is, it does not retain it. Can play HD and Full HD without delay and with multi-channel audio.

And the connection is performed in the same way as in the application.

The best choice

Which of the following will be the best way to watch movies from iPhone? It all depends on the purpose for which you need this connection: just viewing images or watching a movie in high quality.

Once again, let's note the main features of each of the options.

DLNA is the most a budget option ... You only need a WI-FI module and a connection to a home secure network. No additional software installation required. But the limitation may be due to the bandwidth of the wireless connection.

Connection viaHDMI or composite connector... You will have to purchase the appropriate cable and adapter. But data transfer can be carried out in any volume and quality. To interact, you have to install applications. But special problems does not occur when connected.

Apple TV box... The main disadvantage is high price devices. Especially for the purchase does not make sense. But if you already have such a device, then you can enjoy all its advantages, not only for transferring data from your phone. It is also worth considering buying this set-top box if you have a lot of Apple equipment in your house, and also if you do not have a Smart TV. In this case, the functionality of the TV will be expanded to Smart.

Chromecast media player... Although its cost is low and it is easy to connect, there are drawbacks: there are not enough compatible Internet resources, sometimes the connection with the phone can be lost. However, these disadvantages will be eliminated over time.

USB cable. A very easy way to connect. All modern TVs have a USB input. A cable with USB input to connect the iPhone for sure there is. But you can only use this method to view the data gallery from your phone. Best for photography and presentations.

Youtube video... Content management of this resource is very easy to implement. It is enough to install the application and make some settings. But video control from the phone is much more convenient than from the TV remote control. But that's just one resource.

It turns out that the most convenient, fastest, functional and least expensive options are through DLNA and HDMI technology.

So, modern phones have high technical characteristics that can replace many other gadgets. However, the presence of a small display makes watching videos not so convenient. If you have a TV, you can sync both devices and take advantage of their sharing... It's good that there are many options for this, for every opportunity.

iPhone (iPad), as a device for personal use, in most cases fully meets the requirements of the owner. However, what to do when there is a desire to watch a movie in big company or show your friends photos? In this case, you can connect your smartphone to the TV, below we will describe 3 ways how to do this.

In contact with

Wireless connection via DLNA

DLNA (Digital Living Network Alliance) standard is designed to transmit content over local network and is supported by most modern TVs. To stream photos, videos and music from iPhone to the big screen, you need to install special application from App Store, fortunately, most of them (for example, Flipps, iMediaShare) are distributed free of charge.

The algorithm of operation of such programs is quite simple, the only condition is that the iPhone (iPad) and the TV (supporting DLNA) must be connected to the same Wi-Fi networks... It remains to choose in the application the TV you want to pair up and then start streaming content to the big screen. At the same time, the application itself often offers the user many different streaming services, films and music (in most cases in English), as well as the ability to transfer content from the Photo, Video and Music applications.

If the TV is not equipped Wi-Fi module or does not support applications for broadcasting content from the iPhone, you can use a special transmitter. For example, at a cost of about 2,000 rubles, it connects to the HDMI connector of the TV and receives a signal from a smartphone or tablet via Wi-Fi. To transfer videos, photos and music, you also need to install Flipps or iMediaShare on your device.

Advantage this method is that the connection does not require additional devices (with the exception of the transmitter in some cases) and is quite easy to configure. However, at the same time, such programs cannot directly display an image from iPhone screen(iPad) to the TV, but only transfer content from certain iOS applications and connected partner services. Moreover, DLNA technology implies the use of the resources of the final output device (that is, the TV), which may affect the speed of work.

Wired connection

The vast majority of modern TVs are equipped with HDMI and / or VGA connectors, which allows you to create a wired connection between an iOS device and a TV. Such a connection will allow you to directly broadcast the image from the smartphone screen in HD-quality 1080p without slightest delays... The data transfer speed will allow you not only to watch movies or photos, but also to comfortably play dynamic games, quickly type text, etc. Using a wired connection, you do not need to install additional software and set up your smartphone - just connect Lightning ports and HDMI / VGA.

What can be said about the disadvantages wired connection? Firstly, it is wired, which in itself is not very convenient - if you want to show photos on a TV at a party, then you or the owner must have an appropriate adapter and cable.

Secondly, these toys are far from cheap - a Lightning-HDMI or Lightning-VGA adapter in the Russian online Apple Store costs 4 thousand rubles, another 1.6 thousand will have to pay for an HDMI or VGA cable.

Apple TV

Connecting an iPhone to a TV via Apple TV can be summed up in three words - fast, reliable, and expensive. Naturally, spending 14 thousand rubles for a set-top box (fourth generation with 32 GB of internal memory) solely for displaying images from the iPhone screen on a TV is unprofitable, but in general, the purchase of this device is unlikely to be unjustified.

O Apple's capabilities We talked about TV in detail.

To start streaming content from your iPhone or iPad to your TV, you just need to simple procedure- go to the Control Center on your smartphone (gesture from the bottom of the screen up) and select Air Play, and then Apple TV. All that remains is to turn the switch " Video replay»Into an active position.

The connection will be established automatically, which will be signaled by the corresponding icon in the status bar of the iPhone or iPad.

With such a connection, the performance of the TV is not at all important - all resource-intensive processes will be performed by the set-top box.

Is it possible to connect an iPhone to the TV? Certainly. You ask, what is such a synchronization of a gadget with a TV device for? For example, to watch a movie or display photos on the big screen. Agree that this is very convenient? It remains only to find out how such a connection can be made and what is needed for this.

Today great amount TV models (Samsung, Sony bravia, LG, Philips, etc.) connect to WiFi without any problems. Naturally, such wireless connection can be safely used to broadcast content from a smartphone.

Wherein this way sync is one of the most convenient. After all, it allows you to do without wires. Yes and no additional devices also not required.

How do you first need to:

• Create a network or organize an existing one.
• Make sure that the TV has a Wi-Fi module and turn it on. This is done in different ways. Usually through the built-in application: for LG, this is software Smart Share, Samsung has AllShare. On many TVs, you can establish a connection with a smartphone in the "Applications" section, activating there Wi-Fi mode Direct.

Then you can start synchronizing your iPhone and TV:

1. First of all, we connect both devices to the existing WiFi network.
2. Launch on iPhone app for displaying video and other content on TV. For example, Twonky Beam, Smart View (Samsung only) or iMediaShare. They are all available for download on the App Store.
3. It is not difficult to use such software. You just need to specify the file that you want to broadcast on the TV screen, and then select the device itself. We will not dwell on this in more detail. We are sure you will figure it out along the way.

For reference! If for some reason you cannot connect your iPhone to the TV wirelessly via WiFi, then try using google device Chromecast. This small adapter the size of a USB stick needs to be plugged into an HDMI port. Then you can easily and quickly set up a wireless connection with different models TVs.

We connect the iPhone to the TV via USB

USB cable - one-stop solution if you need to synchronize two devices with each other. Including when it comes to connecting an iPhone to a TV. So you can safely use this interface. For this:

1. Turn off the TV.
2. Connect via micro USB cable(30-pin or Lightning - depending on model) iPhone to TV. As a rule, the USB port is located on its rear or side panel.
3. Turn on your TV. In the device settings, set the display of the picture from USB.

That's all! It remains to wait for the synchronization process to complete.

For reference! By connecting the iPhone to the TV via USB, you will not be able to display the picture from the screen to the screen in order, so to speak, to duplicate the content on the display with larger diagonal... The system will only recognize the smartphone as a storage device. Therefore, this method is suitable for those cases when you need to broadcast videos and photos stored in your phone to TV.

HDMI to the rescue

The HDMI interface is quite popular today, which is used when connecting various electronic devices to each other. Its advantage is that through it you can transfer digital signal high precision... That is, this perfect option if you choose to watch high definition video.

True, connecting an iPhone to a TV in this way is slightly complicated by the fact that all Apple devices use their own proprietary Lightning connectors. But this problem is solved by purchasing a special adapter - Digital AV Adapter, Lightning to HDMI "MiraScreen", etc., equipped with an HDMI interface.

How to organize a broadcast from an iPhone to a TV? You will need to do the following:

1. We insert the adapter into the iPhone.
2. We connect one end HDMI wires into the adapter.
3. We stick the other end of the cable into the TV. We use the HDMI connector, which is available on all modern TVs, and any manufacturer - Sony, Samsung, Lji, Philips, etc.
4. In the TV settings, select the mode in which the image will be displayed from the corresponding port. In our case, this is HDMI. Just be careful - modern TVs have several HDMI connectors... So specify the one to which you connected the device from Apple.
5. After these manipulations, your TV screen will display iPhone display... But this is if you have a modern model of an "apple" smartphone - 5, 5s, 6, 7, etc. On the same 4s (and below), instead of the display, only shortcuts for launching video, audio and viewing the image gallery will be visible. but given fact will not prevent you from looking favorite movie or listen to a couple of music tracks.

For reference! By connecting the devices via HDMI and turning them on, all required settings should load automatically. But sometimes you have to do it manually. To do this, both on the iPhone and on the TV, you need to set "HDMI" as the source of the main signal. Then, after successful synchronization, the image from the smartphone will be duplicated on the big screen.

Let's use Apple TV

By the way, there is another possibility to create a wireless connection between an iPhone and a TV. However, for this you have to use the Apple TV media player.

You will also need an HDMI cable. You also need an iPhone no older than the fourth generation. What are the requirements for a branded Apple set-top box TV? 2G, 3G or 4G. With this, both gadgets must be updated to latest version iOS. Otherwise, connection errors may appear.

When all of the above is at your fingertips, then you can proceed:

1. Turn on Apple TV. We connect a TV to this device. This is done using Wi-Fi or bluetooth.
2. We sync iPhone with Apple TV. And do not forget, if WiFi is used, then both the TV and the "apple" gadget must work within the same network.
3. On the iPhone, press the Home button twice. Then we tap on "Volume control, brightness".
4. We choose AirPlay.
5. Further in the list of devices, we are looking for the option we need.
6. After you tap on the set-top box, the AirPlay Mirroring switch will appear. We activate it and wait for the worker image iPhone backgrounds will start broadcasting to the TV screen.

Can I connect my iPhone to my TV with an analog cable?

You can also connect an iPhone to a TV with a popular "tulip". Yes, this is the same composite cable from the distant 1990-2000s. As you remember in those days, this standard was widely used in audio and video equipment.

So today you can use it to connect an iPhone to a TV device. The only caveat is that you won't be able to view high-definition videos.

At the same time, create an analog iPhone connection to the TV, you can use several types of adapters at once. Which one to use - be guided by the model of your "apple" smartphone:

1. Apple Composite AV Cable ... Has 3 standard tulip plugs and one USB. Suitable for 4s and older iPhones.
2. Apple Component AV Cable. It resembles the first version of the cord. It differs in that it contains additional connectors for synchronizing the image and improving the quality of the transmitted picture. Also designed for iPhone models 3G, 4 and 4s.
3. Apple Lightning VGA Adapter. It is used to connect to the TV models of the new generation - iPhone 5, 5c, 5s, etc. It has a 15-pin analog connector for a VGA cable.

It doesn't matter which option you use, the connection procedure itself is as simple as possible. It consists in standard connection wires and corresponding connectors on both devices. As for the TV, in its settings menu, all that remains is to select the image output mode via the AV-input.