Tricolor firmware for all packages. Tricolor TV and all freebie options

Tricolor TV HD channels are available again through modules.

So, the crux of the matter is as follows - both in the recommended receivers for viewing the Maximum HD channels, and in the DRE NKE MPEG-4 CAM modules not recommended today, a common NKE-1 chip from Neotion is used.

This chip allows decoding paid channels that use DRE-Crypt 3.0 / ADEC encoding when working together with the required access card. That is, in all the equipment that was previously used to open HD channels, the same circuit design is used.

This omission later made it possible to disassemble the teams responsible for participating in the decoding of channels and apply them in the software for CAM modules, But more on that later. And here a logical question arises - why on the same equipment still can I watch channels, but not on the other? NKE-1 chip uses as standard external memory, into which the instructions used by it for work can be loaded, and in general, thanks to this, it is possible to change the operating algorithm, so to speak, to use overcrypt. As a result, initially the CAM modules were not provided with all the instructions for DRE encodings- Crypt 3.0 / ADEC.

And for the recommended receivers, in the absence of such instructions in them, an update was made software via satellite. Thus, the operator Tricolor TV deliberately refused to update the software of its CAM modules, which support such a possibility, and called them, in short, non-recommended equipment.

How did you manage to find a solution to this problem?

Since Tricolor TV after free testing their HD channels included in the Maximum HD package ( Tricolor Full HD), did not encounter significant problems on CAM modules, then I later implemented this solution in my recommended receiver models without significantly changing the circuitry. Accordingly, the commands used for decoding TV channels in the new modification of the DRE-Crypt 3.0 / ADEC encoding can be used both on DRE NKE MPEG-4 CAM modules and on recommended receivers. As a result, after a short manipulation of the internal software (dumps) for CAM modules, they appeared new modification from craftsmen.

How can the software of the CAM module be modified?

At present, memory dumps for CAM modules of versions 4010 and 4020 have been posted, which at one time were sold together with Tricolor TV - 23 and 24 series access cards. To change the software, you need to carefully open the module case, remove the board from it, use a hot air gun to remove the flash memory chip - Atmel AT25DF161, flash it with a new dump on the programmer and, after installing it on the board, assemble everything in reverse order. Memory dumps for CAM modules DRE NKE MPEG-4 can be found on many specialized Internet resources discussing this issue. If you cannot do these manipulations, then you can look for a specialist who will help or change your module to an already modified one, simply by paying the difference for the work.

What else do you need to watch HD channels, besides the modified module?

Tricolor TV series 23 and 24 access cards sold together with the CAM module had limited subscriptions to the services provided by the operator. That is, they initially did not plan to work as a separate subscription to HD TV channels. This could have been established a long time ago, when users of such cards tried to officially subscribe to the Maximum HD TV channel package, but the operator using the DRE ID card number immediately turned off all these attempts and they simply ended in failure. After finishing test broadcast channels in high definition, Tricolor TV immediately changed the subscription class for viewing them and all cards from CAM modules simply cannot open them anymore, even if such cards are used in receivers recommended by the operator.

How can you solve the issue with the class of subscription to HD channels at the access card?

Now, this problem can be solved quite simply - the most inexpensive, but recommended Tricolor TV is purchased satellite receiver together with an access card for viewing the Maximum HD package. For example, you can stop at the GS 8305 model, and it doesn't matter that this receiver has negative reviews for its work. After which it is made official registration equipment with activation of the access card, which is later removed from the receiver and put away in a safe place of storage. Further, such an access card is installed in a modified CAM access module and used on your favorite satellite receiver.

That is, smart cards that were sold with modules will no longer open HD channels?

As already mentioned above, such 23 or 24 series access cards simply do not have a subscription class for viewing the Maximum HD package, therefore, without certain tricks this question it will not be possible to fix it. Over time, when the algorithm of the DRE-Crypt 3.0 / ADEC encoding is studied, it is possible that the commands responsible for working with the subscription classes will be revealed, as a result of which it will be possible to modify the recorded data on the card. Also, there is another option - since smart cards are the property of the operator, while assuming that he has no 13 series cards left and those that were sold together with CAM DRE modules NKE MPEG-4, if it fails, it can replace it with a modern version.

What else can the Tricolor TV operator do?

Since the DRE-Crypt 3.0 / ADEC encoding has not yet been fully studied and disclosed, the operator can continue to use its hidden modifications. As a result, for the recommended receivers, it will simply end standard update software from the satellite, after which they will continue to open HD TV channels, as if nothing had happened before. For CAM modules, you will need to edit the memory dump and then reflash them in manual mode. This operation will help to facilitate a special interface that will allow you to reflash modules without disassembling them and removing the flash memory chip, in this direction, searches are now being carried out. Moreover, one should not forget that the magician sometimes runs out of hidden “cards” in his sleeve. So Tricolor TV, after opening all its existing "cards", will simply be left with nothing.

Recommended receivers forviewing channels Maximum HD,and in not recommended nowDRE NKE MPEG-4 CAM modules use a common NKE-1 chip fromby Neotion. This chipallows to providedecoding of paid channels,who use codi alignment DRE-Crypt 3.0 / ADEC when working together with the required cardaccess. That is, in everythingequipment that used toused to open HDchannels, the same is usedcircuit solution. This omission in the future andallowed to disassembleteams responsible for participating indecoding channels andapply them in software for CAMmodules, but more on that later.

Begs a logical question - why onone piece of equipmentyou can still watchchannels, but not on the other?

NKE-1 chip uses as standardexternal memory, which caninstructions to be loaded,used by him for work, and inin general, thanks to this it is possible change a the algorithm of functioning, so to speak,use overcrypt. Vas a result, initially CAMmodules were not supplied in seven instructions for encoding DRECrypt 3.0. And for recommended receivers, inin the absence of suchinstructions, and was producedsoftware updateprovision via satellite. SoThus, the operator Tricolor TV deliberately refused tosoftware updatesproviding their CAM modules,who support suchopportunity, and called them simply- non-recommended equipment.

How did you find a solution this problem?

Since Tricolor TV after free testing of their HDchannels included in the packageMaximum HD (Tricolor Full HD), onCAM modules did not collide withsignificant problems, then I later embodied this solution in their recommended modelsreceivers without significantchanges in circuitry.

Accordingly, the commands used for decoding TV channels in a new modificationDRE-Crypt 3.0 / ADEC encodings, canapply as on CAM modulesDRE NKE MPEG-4, and onrecommended receivers. As a result, after a shortmanipulations with internal software(dumps) for CAM modules,their new modification appearedfrom craftsmen.

How can the software of the CAM DRE module be modified?

Currently posted memory dumps for CAM modulesversions 4010 and 4020, which in theirtime were sold together withaccess cards Tricolor TV - 23 and

24 episodes. To change the software you need carefully open the module case,extract a board from it, usinghot air gun remove flash microcircuit

memory - Atmel AT25DF161, flash its new dump on the programmer and after installationher on a board, collect everything in returnsequence. Memory dumpsfor CAM modules DRE NKE MPEG-4can be found on manyspecialized Internet resources dealingdiscussion of this issue. Vin case you can'tdo these manipulations, thenyou can look for a specialist,which will help or change your module to alreadymodified.

What else do you need to watch HD channels, besides modified module?

Sold in conjunction with CAM access card module 23 and 24Tricolor TV series hadlimited subscriptions toprovided by the operatorServices. That is, the work was not originally planned in them.separate HD subscriptionTV channels. It could beset a long time ago whenusers of such cards triedto officially subscribe to the Maximum HD TV channel package, butoperator by DRE ID card numberimmediately wrapped up all these attemptsand they ended simplyfailure. After finishingtest broadcasting of channels in high definition, Tricolor TVmade a change instantlythe subscription class to view themand all cards from CAM modulesthey simply cannot anymoreopen, even if you use such cards in the recommendedreceiver operator.

How can you solve the issue with class of subscription to HD channels from access cards?

Now, this problem can be the solution is quite simple -purchased the most inexpensive, butrecommended by Tricolor TVsatellite receiver in conjunction withaccess card for viewing the Maximum HD package. For instance,you can stop at budget model GS8306, and it doesn't matter that this receiveron work has negative reviews.

After which it is made official registration of equipment with card activationaccess, which in the futureremoved from the receiver and itstows away in a safe place

That is, smart cards that sold with modules, no longeropen HD channels?

As mentioned above, that such access cards 23 or 24series simply do not havesubscription class to viewpackage Maximum HD, therefore withoutcertain tricks this question will not be possibleto correct. In time whenthe algorithm of work will be studiedDRE-Crypt 3.0 / ADEC encodings, notdisclosure of commands is excluded,responsible for working with the subscription classes, as a result of which you canwill modify the recordeddata on the map. Also, there isanother option - since smart

cards are property operator, while proceeding from the fact that he has no 13 series cards leftand those that were sold together withCAM modules DRE NKE MPEG-4, then

if it fails, he can replace it withmodern version.

What else can you do operator Tricolor TV?

Since DRE Crypt 3.0 / ADEC encoding is not complete yet studied and disclosed, then the operator canfurther use ithidden modifications. As a resultwhat for recommended receivers - it will endjust standardsoftware update from satellite,after which they continuecontinue to open HDTV channels, as if nothing had happened before. For CAM modules the sameyou will need to edit the memory dump andtheir subsequent flashing inmanual mode. This operationhelp facilitate specialan interface that will allow you to reflash modules without themdisassembly and retrievalflash memory chips, in thisdirection and are produced nowsearch. And it should notforget that the magician sometimes runs out of hidden"Cards" up the sleeve. So is the TricolorTV after opening all itsavailable "cards", simplywill be left with nothing.

To enjoy watching TV calmly and not worry about possible problems, you should use only the most modern, the best equipment... But progress is developing at such a rapid pace that even recently acquired equipment almost immediately begins to lag behind existing requirements. Therefore, in order not to spend extra money on the purchase of new devices, you should simply update the old software in a timely manner. An excellent option for keeping the receivers up to date is the Tricolor gs 8306 firmware. But it should be remembered that professionals are obliged to update the software, since any mistake can make the receiver inoperative.

Any update has several important goals:

1. removing existing errors and dealing with existing system failures;
2. introduction of a more convenient, functional and friendly interface;
3. connection additional options and services;
4. reconfiguring equipment for correct work programs;
5. maintenance of equipment up-to-date.

At the same time, in 2019, the firmware occurs both at the request of the user and at the initiative of the television company.

You can find out about the possibility of updating the receiver on the official website of the provider or from information message on the TV screen. Other sources of information are also possible, since you can learn about the revision of the software from the news on various sites, conversations with friends, the recommendations of the masters.

GS 7300 firmware for free viewing Tricolor

Those who have already decided to independently reflash the receiver for free viewing and quality reception signals, you should choose one of the currently existing options:

• installing the program using a bootable flash card;
• automatic update of the receiver.

It should be remembered that, regardless of the option chosen, users must be careful and careful so as not to end up in an unpleasant situation.

Suddenly interrupted update or incorrect, rash actions will lead to equipment breakdown and loss of the right to warranty service... It will be almost impossible to fix the breakdown, and the repair costs will be close to the cost of a new receiver.

Gi hd mini firmware for Tricolor without card 2019

To update the receiver software without a map and unnecessary worries. Should download suitable program... It can be found on many third-party sites that offer users various programs and drivers. If the program is already ready, it will remain:

1. format the flash card by installing file system FAT 32;
2. transfer the program to it (it is inadmissible to change the name of the file, it is necessary);
3. insert a flash drive into a USB port;
4. turn the receiver on and off;
5. after switching on, the automatic update process will begin;
6. you must wait until the end of the process;
7. and carry out the settings, indicating the main parameters of using the device
8. reboot the receiver.

This completes the procedure and you can start using the updated technique.

It should be noted that it is impossible to cancel the firmware, therefore, you need to be extremely careful when downloading the program, since the quality of the equipment depends on it.

Firmware for GS 8306 Tricolor

If it seems difficult to search for an update on third-party resources, and you cannot get to the official firmware website created specifically for Tricolor, you should wait until the system decides to update on its own. For this you will need:

• disconnect the receiver from the network;
• turn on the receiver again;
• turn on information channel provider;
• wait for the question about the software update to appear;
• agree with the installation;
• wait until the process is complete;
• set up equipment.

It should be borne in mind that it is unacceptable to turn off the device during installation, as this will lead to irreparable malfunctions. An interrupted download will result in the absence of any work program, which would allow the use of the device.

Additionally, it should be noted that if there is no message from the system (about the start of the update) within 5 minutes after turning on, you should reset the settings to the factory settings and repeat the process.

How to flash a Tricolor card for free viewing

Despite the simplicity of the process, it is better to entrust the firmware to professionals so as not to find yourself in a situation where the desired freebie turns out to be unexpected additional costs... But, if accepted hard decision update yourself, you need to pay attention to the correctness of the selected program, since different brands receivers require the use of different drivers.

Additionally, it should be mentioned that there is a third configuration option that involves the use of a computer. But it requires acquisition special cable, which allows you to connect the PC to the receiver, so it is better not to overpay and immediately contact the specialists who guarantee a high-quality result.

Receivers for satellite TV regularly need flashing - software updates. This procedure helps to get rid of the most common errors, and also allows the device to maintain communication with the satellite and perceive new operator functions. In addition, it is possible to flash the Tricolor receiver for free viewing of encoded channels. Let's talk about how to update the set-top box firmware yourself.

Possible update methods

You don't have to be a cool programmer to change the firmware. Moreover, every Tricolor user has performed a similar operation at least once. A banal software update from a satellite, which is required to be carried out regularly, is just nothing more than a flashing of the equipment. But besides this, available to all, there are other options for updating the firmware.

How can I upgrade my set-top box?

You can flash the Tricolor gs 8306 receiver, or any other model, as follows:

• by downloading the firmware from the computer;
• by downloading software from another receiver;
• bay update via USB-stick;
• by allowing the prefix to update itself via the Internet.

Which option to use, each subscriber chooses for himself. For example, if the set-top box is not connected to the Internet, the ability to update via worldwide network disappears for her. But if someone of the user's acquaintances has a receiver configured for free access to the content or implementation of any useful functions, you can copy software from it without overpaying to specialists.

Where can I get the new firmware?

The operator regularly provides subscribers with access to new software via satellite. We have already described in detail how. But if for some reason a subscriber needs to load not the most latest version Software, and one of the old or modernized ones, you will have to look for sources on your own.

You can download the firmware:

• from the Tricolor official website;
• from databases on the Internet;
• from another receiver.

Firmware Installation Instructions

Since we have already written about software updates via satellite, let's take a closer look at other options for flashing set-top boxes. As a rule, these algorithms are suitable for any model of equipment.

How to flash a Tricolor receiver using a computer?

To download the software to the receiver from a PC, you need a null modem cable. You can buy it at any electronics store. In addition, it is important that the computer has a COM port, since it is through this port that the connection will take place. Stationary PCs usually have such a connector, but laptop owners will have to use a COM to USB adapter.

Before starting work, the set-top box is disconnected from the power supply and the TV receiver. Then it is connected to the computer with a null modem cable through the RS232 connector.

Important! Do not connect any equipment to the computer "hot"! Before connecting, the PC must be turned off.

After connecting, you will need to do the following:

• download the DRE Burner program (usually in the same place where the firmware itself was downloaded);
• run the program;
• in the window that appears, click Open File;
• select a pre-downloaded file with firmware;
• click Upload;
• turn on the receiver.

After turning on the equipment, the program window will begin to display the progress of the software loading process in percent. The same information will appear on the console display. There are two process status bars in the program - loading and burning. It is necessary to wait until both of them are filled to 100%. After that, the equipment can be disconnected from each other - the firmware is complete.

How to flash a Tricolor receiver from another receiver

If the subscriber has a set-top box at hand with a version of the software that suits him, he can download it to any other set-top box. Naturally, it is desirable that this device belong to the Tricolor operator. You can try to reflash the equipment left over from another TV company in this way, but hardly anyone will undertake to guarantee the success of this enterprise.

Before reflashing the Tricolor gs 8306 receiver (or another model that is not equipped with a USB output), as in the previous case, you will need to purchase a null modem cable. With its help, you will need to connect two consoles. In this case, the one that serves as the source of the firmware must be connected to the TV.

• turn on the source prefix;
• go to the menu and select the "Settings" item;
• enter a pin code (0000 or custom);
• select the section "Data transmission";
• press the blue key on the remote control;
• wait until the data transfer scale is filled and the message "Waiting for remote connection" appears.

Important! Only at this moment it is necessary to turn on the receiver, to which the new firmware will be loaded!

Next, a software download bar will appear on the TV screen. You must wait until it fills up to 100%, and a dialog box appears on the screen with a proposal to repeat the transfer. Here important point- when the window appears, you need to pay attention to the displays of the receivers. After downloading the software, it starts recording into the memory of the updated set-top box. This process is not displayed on the TV, its indicator is shown on the display of the set-top box. Wait until the value of this indicator reaches 100%. After that, the flashed set-top box will automatically reboot, and the clock will be shown on its screen. Only then can you press the "No" button in the dialog box on the TV screen.

This completes the software update. The devices can be disconnected from each other and used normally.

Flashing through a USB flash drive

A simple way to flash a Tricolor b211 receiver or other models equipped with a USB connector, without the hassle of wired connections, is to download the software via a USB flash drive. The process is quite simple:

• a FAT-32 flash card is formatted;
• a new firmware is downloaded from a computer to a formatted flash drive;
• connect the USB flash drive to the USB connector of the set-top box;
• include equipment in the network.

After switching on, the set-top box itself will determine the source new version Software and start updating. It is only important to ensure that it is not disconnected from the power supply until the firmware download is complete. Otherwise, the equipment may become unusable.

Important! The progress of the process can be monitored with the help of messages appearing on the TV screen. At the end of the update, the receiver will reboot itself.

Updating the firmware in this way is only possible for serviceable set-top boxes. If you have already tried to reflash the equipment, but did not get the desired result, it is better to update the software via a wired connection. Also this option is impossible if the receiver for some reason does not turn on.

Why?

I think that everyone is already aware that Tricolor TV is a place for freebies ... free opportunity watch almost all channels.

And so ... the topic is relevant and therefore has collected all the possibilities about this topic. Let's start with a plugin that solves a lot of questions ...

First option…

Actions…

WE INSTALL AS A NORMAL PLUG-IN THROUGH A USB FLASH DRIVE. Stop all plugins before installing.
We throw the attached file keydata to the keys folder and run the plugin.
AND ENJOY WATCHING THE TRICOLOR PACKAGE (HD CHANNELS DO NOT WORK)

plugin.rar .... take:

keydata.rar .... we take:

Key path \ plugin \ var \ tuxbox \ config
e36.bin or e56.bin

However ... Tricolor TV now works on Oscam and Vikard, but every day you need to change the keys for them ....

The second option ...

Tricolor and without an access card? Does that happen?

Yes, sometimes …
First you need to install the emulator oscam(if it was not installed earlier). To emulate the DRE (Tricolor) encoding, a special version oscam emulator.

Here is the Oskam assembly, It updates the keys itself.
plugin.zip…. we pick up:
Install from a USB flash drive. After rebooting, install DRE, then start au off au again au, and only then oscamdre on…. the keys are fresh.

Specifically about this topic ...

The third option

Gold Wafer cards ... (very suitable for Dreambox)

The card contains a peak-controller microcircuit for example PIC16F84 and an EEPROM memory microcircuit for example 24C16.
In fact, these are exactly the same cards.

A firmware for this card has appeared in the public, which emulates the official map of the tricolor 13 series.

It opens the same as oscam_dre emulator, but the card has AU (auto update), i.e. there is no need to update the ee.bin key file every week.

In addition, the card can be used in those tuners that do not have an emulator.

Specifically ...

Yes! Remains eternal question... will Tricolor TV be free for a long time?