Program for recording streaming audio from the Internet. Streaming Video Recording: The Best Ways

Streaming playback of audio and video tracks is one of the most common ways not only to reduce the load on servers with multimedia data from which loading in progress, but also facilitate the task of playback on users' computers, since they do not have to wait full load file.

However, this method there is a small problem. Usually, such streams cannot be saved to disk. standard means. This circumstance has led to the emergence of more than a few dozen special programs to write tracks to a file.

Unfortunately, at present best utilities to record streams are not free. IN good case, you are provided with demo versions cut down in functionality or trial versions for a limited time.

The situation became like this after judicial systems were kicked out of the Internet superior in all respects free programs such as StreamBox VCR and GetASFStream. Mentions of them can still be found on dubious download sites, but in most cases the files offered are viruses.

Nevertheless, the task of recording media tracks can still be solved, albeit by workarounds. The first thing to do is to use free web services for recording streaming media, which require only a link to a page with audio or video as input. For example, a link from YouTube.

If the services cannot help you in any way, then you can record media streams while they are playing on your computer. If a little easier, then last case first you launch a recording program that will save everything that is transmitted to the speakers and to the screen, and then open and play the audio / video you need from beginning to end.

Note: Of course, these are not the most better ways solutions. However, they are free and available to everyone. And their potential is quite enough to solve most of the problems that arise.

Note A: When using these programs, you must remember that there is the concept of "copyright". Of course, it is not so relevant for our country, but the concept is still there.

Overview of free programs for recording audio and video streams

If you need to record videos from well-known media sites such as YouTube, then using online services such as savefrom is sufficient. Just enter desired address page with media stream in the input field and click "download". There are many such services today. Basically, they differ either in the list of supported sites, or in the way the final files are provided (forwarding to mail, various formats etc.).

Unfortunately, these services are not always able to help you. For example, a media site may not be supported by the service. Or the video is displayed using a unique player that uses tricky loading algorithms. Or...

If this happens, and the services cannot cope with the task, then a workaround can be used. Namely, record media tracks while playing audio and video on your computer. Of course, with such a recording there will be a slight loss in quality, but this fact is more than offset by the fact that you can record any audio or video, wherever it is and no matter how technologically it is played.

Jing is a simple and intuitive interface for recording audio and video streams

Debut Video Capture

Audacity

is the recording process streaming audio on the HDD in real time. You can always record your favorite internet radio show and listen to it at your convenience. You also have the opportunity to listen to the recording on the player or any other mobile device.

In this article I want to talk about using the most popular on this moment music players: , And .

Record audio online in Aimp3 player

In the capture settings, you can also enable the option to split the recording into tracks, by size or by time and adjust the delay, as well as specify whether to record tags or not. Tags are information about the author, track name, genre, etc.

Click Apply And close.

Turn on internet radio. It can be selected from the catalog. To do this, go to the menu, select the item Utilities / Internet directoryradio stations.

To turn on the recording mode, press the key Radio capture.

To end recording, press the key again. That's all the arithmetic.

Recording internet radio in Winamp

With the player, the situation is somewhat different. Here we need to install the additional Streamripper plugin.

After installation, launch Winamp. The Streamripper module will start automatically. We go into the settings, for this we press the key Options.

On the tab Connections tick the box next to Try to reconnect to the stream if it drops– reconnect to the stream when it breaks. In order to limit the file size, activate the option Don't rip over X megs and indicate the size in megabytes in the box Megs.

On the tab File specify the path to save the audio file and activate the option Rip to separate files if we want to split the recording into tracks. To write to a single file, use the option Rip to single file. These are the main plugin settings.

You can also choose a skin for Streamripper from the Skins tab, like this one.

To start recording an audio stream, click the button. start, to end - the key stop.

Record audio online with JetAudio

In is carried out by pressing the Record button, which is located at the top of the player.

After clicking, the recording window will open. Here you can select the sound source, use the recording timer, select the format target file, a directory to write to, a file name pattern, and some Extra options, such as (only available in Plus version).

To start recording, press the key Begin, to complete - Stop.

That's probably all.

As you can see, there is nothing complicated in audio recording online no.

Use the option that is convenient for you.

Total Recorder - the best of the few programs that allow you to capture and digitize sound from any source in real time. Any sound coming from sound card will be intercepted and duplicated by this program.
Surely you, at least once in your life, had a situation when you really liked the music from a game or a cool voice acting for something? I wanted to have it, but I couldn't… Right? Also, for those who used IP-telephone conversations, sometimes it is not superfluous to record the conversation in a file. This program is indispensable for those who like to listen to Internet radio stations. Now you can easily save your favorite melody.
With help Total Recorder, you will capture the sound "one to one" from the original source without much hassle. The program is easy to set up and use. In addition, it has a crack, after which it will not be difficult for any user to figure out the settings.
This is what the interface looks like at work:

Do not rush to launch this product. After installation, you need to restart your computer, as the program will embed its sound driver into the system:

If after the reboot you look at the properties of multimedia devices, you will immediately see that the sound card drivers have been replaced by TotalRecorder. However, the firewood of the sound box remains intact and at any time you can return everything back. Now run the program and register. An unregistered program will not rob the sound.

Exit the program and start the crack. Now everything is ready! It remains to run Total Recorder and make small settings.

First go to the menu Settings - Options, in the window System make small changes. Such as - in the section Devices, be sure to check the boxes to play and record directly from the sound card. It is advisable to turn off the sounds "to system events", simply put - your beloved will turn off dearly sound scheme voicing Windows. But this is necessary because. if at the moment of grabbing something in the system “blinks” or “blooms”, then this “bloom / bloom” will definitely be present in the phonogram. If you are sure that this will not happen, then you can leave the scheme enabled. Don't forget to allow high priority in the system so that all sorts of programs (that like to snatch more resources and not give you the opportunity to steal your favorite melody) can't play Total Recorder to the background.
Next, click on the bookmark MP3:

The author did not bother with the development of his own mp3-coding algorithms (which is a very, very sensible solution), but allowed the use of third-party developments. Personally I recommend Lame. In my opinion this is the best mp3 codec. Latest Versions this codec can always be found at the manufacturer and . Now, having connected the DLL-ku, select your favorite codec operation parameters and click Apply in order to save the settings. You can rummage through the remaining tabs and change the settings in them to your own (they are not so significant). Now click on OK and open another menu. It is available from Settings - Recording Options... And it is also called directly from the muzzle of the program with the button Setting Recording Options… The following window will open:

If you have Russified the program, then it will not be difficult to deal with the settings. Keep in mind that these are the options you will need to vary in the future. Because different programs use differently sound reproduction. And you will have to change the settings of this window quite often. Get ready for it. If, with the record button pressed, in the program peak indicator does not show signs of life, it means that the sound stream through which the sound is driven is not configured or incorrectly selected required program. Stop the recording process, open this window and select the sound card settings menu:

There, check the box on the audio stream that (in your opinion) is being used and resume recording. If everything is correct, then the process will proceed normally.
To rob sounds and melodies from games that do not allow you to switch to another task, you can use the following technology. First, Total Recorder is launched, the settings for the intended audio streams are set, the recording is turned on, the game starts ... After the desired fragment has sounded, just exit the game and stop recording. If the recording has been made, then the button for playing the robbed soundtrack will be available. You can listen to what happened. If the sound was not robbed, then change the recording settings and try again. I am sure that you will definitely select the necessary flow.
After a successful "removal" of the sound, save it to an uncompressed WAV(PCM format) file and edit in any .

The program also provides a very good normalization function, located in paragraph Volume - Normalize...

At the end of the process of "removing" the sound, will be made automatic correction AFC for loudness. Although, personally, I'm more comfortable with normalization in an audio editor than in a sound ripple.

Important!
Do not use cracks and patches that violate source programs! They hack this product incorrectly!
After that, all sorts of problems arise, in the form of hiss, cod, time limits on the robbed file, and so on ...
For full registration and work, use only keygens or ready-made keys.

The use of a home PC is extraordinarily multifaceted. In particular, it is widely used for recording various sounds.

Recording music at home, creating a variety of podcasts and voice notes is used big amount users.

It is for them that this review of three beautiful and really free utilities for sound recording.

Audio Master

Russian program for recording sound from a computer allows you to not only capture speech, but also edit the track.

It's more of a full-fledged editor than special utility to record sound. However, as home studio shows himself at a decent level.

First you need to download a program for recording sound in Russian, then install it. After installing the program, creating an entry will take place in three simple steps.

Stage I: Recording

In the window, the item "Record sound from microphone" is selected. It will open the recording window.

In it you will need to select a recording device (drop-down list after the item "Select a recording device").

If only one microphone is connected, it will be the default recording device.

Then you need big button in the middle of the window (Start new record). Recording starts with a three-second delay, so there is time to prepare.

In the process, you can pause it, and if something does not work out, then completely cancel and start over.

The checkmark at the bottom of the window allows you to record the track directly to the processed file.

Stage II: Setup

The recorded file can be edited. For this, special tools are used:

If the recording turned out normal and without any effects, then you don’t have to worry about adding them. Now it is available in the editor as a regular track.

Besides, soundtrack can be cut from home (or any other) video.

Stage III: Preservation

After finishing editing, the finished track can be saved in one of seven formats (WAV, MP3, MP2, WMA, AAC, AC3, OGG, FLAC).

Free Audio Recorder

This is great small program to record sound from a microphone. To record sound, you must first download and then install the program.

Upon completion of the installation, the actions will look like this:

The program itself is simple and not very different from a standard recording utility. It's nice to have the ability to save records to a specific directory.

It helps a lot in organizing. large archive records.

The only sad thing is the impossibility of capturing sound from the computer itself.

NanoStudio

The name of the program is completely true. It includes all necessary tools to create a complete composition.

And thanks mobile version they all fit in mobile phone.

The main sound generation comes from a virtual synthesizer and a sample pad. As additional funds drum machine, sequencer and mixer perform.

The finished song would be incomplete without vocals, but it will have to be added in another program.

Many effects can be applied to each track.

Sound recording in the program occurs with the help of many special tools for mixing.

Fifteen cells are available to the user for simultaneous use various tools:

Recording an online broadcast is more difficult than downloading regular video from youtube. We've rounded up the best ways to record streaming video on computer.

VLC Media Player

VLC can play and record streaming video. And also this good player for Windows that reads most video formats.

Download for free from the official website: videolan.org.

To start broadcast capture in VLC:

• Open the "Media" drop-down list and select "Open URL", or press Ctrl+N.




• Enter the broadcast address in the "Enter network address”, and the broadcast will start playing. Paste paste a link to the broadcast from YouTube or a direct link to the stream.
• Select the "View - Additional Controls" tab. An additional row of buttons for recording video will appear at the bottom.
• Click on the "Record" button.

Another way to capture video via VLC:




These 2 methods are shown in the video:


Download Master

Other free program to record streaming video - Download Master. She can download videos from YouTube, Metacafe, Break, Vkontakte, Rambler Vision, Video bigmir, Video PLAY.ukr.net. To download streaming videos from other sites, use DMBar for Firefox.

Download Download Master from the official site: westbyte.com.

To start downloading via Download Master:




The Download Master program downloads the video separately from the audio track. To connect them, you need to download additional program convertilla. Download Master will offer to download it if necessary.



DMBar

When you visit a page with a video, a download button will appear on the DMBar in Firefox. To activate it, you need to start playing the video.



FlashGot

FlashGot - add-on for Firefox browser, with which you can transfer downloads to external managers. But we are interested in another function - interception of video and audio streams played in Firefox. This is done like this:




Retrieve video from the cache

The browser caches the video in the computer's memory. These files can be pulled from system folder. Each browser has a different path to the cache folder, so it's easier to use the VideoCacheView program.

Download from the official site: nirsoft.net.

Run the program, it will scan the system itself and find the videos from the cache that you have recently watched.



Screen capture

There are many programs for recording screen video with sound: Fraps, Movavi Screen Capture, Snagit, Bandicam.

Consider recording a video using an example Movavi software Screen Capture Studio because it's easy to set up. Free version The program is given for 7 days, videos up to 120 seconds are recorded in it and watermarks are superimposed. Where can I find full version you know




Capture video instruction online broadcasts using Movavi:


Conclusion

Sites streaming may not support all video recording methods. So if one method doesn't work, try another. When capturing an image from the screen, consider the power of the computer. Not every computer will be able to record high-quality video.