Restore point creator allows you to create points for later system recovery. Such software allows, if necessary, to perform system recovery in the early stages. Note that you can restore an unlimited number of points. Especially for the convenience of users, it is possible to comment on each point.
This ensures that the desired restore point will not be mistakenly destroyed when deleted. All processes can be automated. Thus, points will be created on a schedule.
At the same time, you will always know that you have the latest version of the working system. The interface is simple and clear. Even a novice user will have no problem mastering it. One has only to note that it is distributed only in English.
Features of Restore Point Creator
The program is quite simple to use, distributed under a free license. With its help, the system is quickly restored to its last operating state. You can download Restore Point Creator from our website. The application works in tandem with the Windows operating system.
If there are any problems in the operating system that interfere with the normal operation of the computer, most users simply reinstall Windows again. It is much easier to roll back (restore) Windows to some previous state when everything was working correctly. This takes a maximum of 20 minutes - and you get a fully working and customized copy of the OS. This article describes how to create a Windows 7 restore point.
Recovery Benefits
Reinstalling is not a bad option, but it takes a long time. After all, you need not only reinstall your OS, but also install all the necessary software and drivers on it. If you do not have media on which you can temporarily throw all the important information - this can be a big problem.
The created Windows 7 restore point avoids such problems. If your system was damaged by viruses, if you connected incorrect drivers or installed some program incorrectly, you just need to start the rollback process.
In order to use this feature, users need to know how to create a system restore point. This will be discussed later in the manual.
Create restore points in automatic mode
Your operating system automatically saves Windows operating states. As a rule, this happens before installing critical updates, complex software with a large number of libraries, large-scale changes in the registry, driver updates, and so on. 
At any time, you can use the automatically created points that are stored for some time. However, if your operating system has been damaged, and there are no relatively recent saves, this is a rather serious nuisance. Rolling back for a whole month, and then reinstalling all programs is a long process.
Most often, a similar problem occurs for those users who, for whatever reason, have disabled automatic system updates. In this case, it is recommended that you know how to create a restore point for your OS.
Creating a return point manually
You can easily create your own restore points using standard Windows tools. To do this, follow a few steps in the provided step-by-step instructions:
Wait a while for the new restore point to be created.
What to do if there are no rollback points
If the system files of your Windows were damaged, and you do not have any return points, you can try using the "sfc / scannow" command:
This command will check all Windows system files and, if they are damaged or missing, replace them with working ones.
To help protect against problems caused by installing software or hardware that can make your system unstable, Windows 7 offers System Restore. The task of this program looks quite simple, but it is also very logical, and consists in periodically creating Windows 7 restore points, each of which includes files of all currently installed programs, current system registry settings and other important system data.
Thanks to this, in the event of problems due to the installation of any program or hardware, System Restore makes it easy to return the system to the state in which it was before the installation. System Restore automatically creates restore points under the following conditions.
- Every 24 hours... This point is called the system checkpoint and is set once a day if the computer is in working order. If the computer is not working, a system checkpoint is created the next time the computer is turned on (provided that at least 24 hours have passed since the previous checkpoint).
- Before installing certain applications... Some newer applications (especially those that ship with Office 2000 and later) already know that System Restore exists and will therefore offer to create a restore point before installation.
- Before installing the patch from the Windows Update site. System Restore always creates a restore point before installing a patch, either manually through the Windows Update site or automatically through the Automatic Updates option.
- Before installing an unsigned device driver... When installing unsigned drivers, Windows 7 displays a dialog box with an appropriate warning message. If the user still decides to move on, a restore point must be created before installing the driver.
- Before restoring files from backups... If you use the Windows 7 backup software to restore one or more files from backups, System Restore also creates a restore point in case this procedure causes damage to any system files.
- Before returning to a previous system configuration using System Restore... Sometimes restoring a configuration to a previous state does not fix the current problem, or even leads to a number of other problems. Therefore, System Restore creates a checkpoint just before starting the restore process so that if something goes wrong, the restore operation can be canceled.
Creating a restore point manually
Also, the System Restore utility allows you to create restore points manually. The steps required for this are as follows.
- Click on the button Start, type restore point in the search box, and then select an option from the list of search results. Will appear in a dialog box System properties, in which the tab will be opened System protection.
- By default, restore points are automatically created in Windows 7 only for the system drive. If there are other disks in the system and want to automatically create restore points for them, select the disk of interest in the Protection settings list, click the Configure button, activate the Restore system settings and previous versions of files switch and click the OK button.
- Click on the button Create to display the dialog box Create a restore point.
- Enter a description for the new restore point and click the button Create... System Restore will create a new restore point and display a dialog box informing you about it.
- Click the Close button to return to the System Properties dialog box.
- Click on the button OK.
If you need to create restore points quite often, going through all these steps every time is tedious. In such circumstances, it is much better to use a custom script to create a restore point instantly.
Script to instantly create a new restore point
If WScript.Arguments.Count = 0 Then
Set objShell = CreateObject ("Shell.Application)
objShell.ShellExecute "wscript.exe", Chr (34) & WScript.ScriptFullName & Chr (34) & "Run", "RunAs", 1
more
GetObject ("winmgmts: \ \ \ Root \ default: SystemRestore"). CreateRestorePoint InputBox ("Enter a description for restore point:", "Create restore point - Quick Tutoriel.com"), 0, 100
MsgBox ("restore point created!")
End If
It is important to note that this script must be run as an administrator account. In this scenario, first the SystemRestore class is returned using WMI (Windows Management Instrumentation), then a dialog box is displayed prompting you to enter a description for the new restore point, which is then used to execute the CreateRestorePoint method, after which the results are checked and a dialog box with information is displayed. whether to create a restore point.
Restore point creator- a convenient and completely free utility for creating restore points for Windows. It is thanks to her that you can return your Windows system to an earlier state in the event of a system failure, boot failure and other unwanted things.
The number of recovery points is not limited. That is, you are not limited to creating 5 or 10 restore points. This procedure can be performed an infinite number of times. If you want - before installing each program, if you want - every day at a given time interval. But downloading Restore Point Creator is enough only once on our website.
Imagine a program for taking screenshots. The Restore Point Creator application uses the same principle to take “snapshots” of your OS before installing programs, drivers, updates and any other software that can damage the operating system.
Of course, a similar standard utility is included in the Windows OS. However, it does not always create restore points at the right time and is limited by the number of restore points. Restore Point Creator in this regard is a much more flexible program than a standard utility.
Key features of Restore Point Creator:
- The creation of restore points is not limited.
- Ability to leave a comment for each of the restore points. This is incredibly handy because it lets you understand what changes a recovery point is referring to. In addition, a detailed commentary will protect you from accidentally deleting the desired Recovery point.
- The ability to automate the process and configure the creation of all recovery points on a schedule.
- A fairly simple interface that will not cause any difficulties.
Screenshots of the program
Description:
Restore point creator a free program to simplify the creation of system restore points. A restore point is a copy of the registry and all critical files at some point in time. Using the program, you no longer have to walk through a dozen windows and windows menus, but simply pin the program shortcut in a convenient place and create restore points with two clicks of the mouse. In addition, you can give points a custom name and selectively delete them. For many, this will already be enough. But the program offers even more options, essentially being a shadow copy control and system recovery center. Unlike other similar programs, Restore Point Creator uses exclusively Windows API functions, i.e. is a tool for managing the built-in capabilities of Windows.
An article about system recovery using Windows:
What is system protection?
System protection is a component that regularly creates and stores information about system files and computer settings. System protection also preserves previous versions of modified files. These files are stored in restore points that are created just before significant system events, such as the installation of a program or device driver. They are also created automatically once a week if no other restore points were created in the previous week, however, you can create restore points manually at any time.
System protection is automatically enabled for the drive on which Windows is installed. System protection can only be enabled for drives formatted with the NTFS file system.
There are two ways to take advantage of system security.
If your computer is running slowly or with errors, using System Restore, you can restore the system files and settings on your computer to a previous point in time by using a restore point. For more information on System Restore, see System Restore FAQ.
If a file or folder has been accidentally changed or deleted, you can restore the previous version, which is saved as part of the restore point. For more information on previous versions, see Previous File Versions: Frequently Asked Questions.
How does System Restore work?
System Restore uses restore points to return system files and settings to a specific point in time without affecting personal files. Restore points are automatically created on a weekly basis and before significant system events such as the installation of software or device drivers. You can also create a restore point manually.
Opening System Restore
Save open files and close all programs before running System Restore. After confirming the restore point, System Restore will restart your computer.
Open System Restore. To do this, press the button. In the search box, type System Restore, and then select System Restore from the list of results. Administrator permission required. If you are prompted for an administrator password or confirmation, enter the password or provide confirmation.
Can I undo the changes made during System Restore?
Yes. Each time you use System Restore, a restore point is created before making any changes, so you can always revert to its original state if the action you took does not correct the problem. If you run System Restore while the computer is in Safe Mode or using System Restore Options, you cannot undo the restore operation. However, you can run System Restore again and select a different restore point, if one exists.
Undo changes made by System Restore
Open System Restore. To do this, click the Start button. In the search box, type System Restore, and then select System Restore from the list of results. Administrator permission required. If you are prompted for an administrator password or confirmation, enter the password or provide confirmation.
Click Cancel System Restore and click Next.
Review your selections and click Finish.
What files are changed during a system restore?
System Restore affects settings for system files, programs, and the Windows registry. Changes can also be made to scripts, batch files, and other types of executable files created under any user account on this computer. System Restore does not affect personal files such as email, documents, or photos, so it cannot recover deleted files. If a file archive was created, then these files can be restored from the archive.
How is the restore point selected?
System Restore automatically recommends the most recent restore point created before making significant changes, such as before installing a program. You can also select from a list of recovery points. Try to use a restore point that was created shortly before the date and time when the problems began to appear. The descriptions of the automatically generated restore points correspond to the event name, such as "Installing an update by Windows Update". System Restore returns your computer to the state it existed before the selected restore point.
How long are restore points saved?
Recovery points are stored until the disk space reserved for system recovery is full. As new restore points are created, the old ones will be deleted. If you disable System Protection (a feature that creates restore points) for a drive, then all restore points are deleted from that hard drive. When you re-enable system protection, new restore points are created.
What if applying System Restore didn't fix the problem?
If System Restore does not fix the problem, you can cancel the restore operation or try to select a different restore point. If System Restore does not display any restore points, make sure that System Protection is turned on and that there is at least 300 MB of free disk space on the hard disk if the capacity is 500 MB or more, or at least 50 MB if the capacity of the hard disk is not exceeds 300 MB. If System Restore doesn't fix the problem, you can try using the advanced recovery method. For more information, see Choosing an Advanced Recovery Method.
Interface overview:
A. Create named point.
B. Create a named default point.
C. Creating a point named System Checkpoint ...
D. Updating the list.
E. Restore the selected point.
F. Delete selected point / points.
G. Restore the selected point in safe mode.
1. View disk space usage and storage space (if specified) for each disk.
2. View and set the storage size for each disk.
3. Adding a task to the scheduler (only for the version installed on C: \ Program Files (x86)).
4. Adding an item to the "My Computer" context menu
5. Autocheck disks for full shadow copy storage.
6. Request for confirmation of actions.
7. Keeping a journal.
8. Auto-close the program after creating a restore point.
9. Protection of a specified number of points from deletion.
10. Assign a custom default point name.
11. Allow to delete all points (you shouldn't do this).
12. Bypassing UAC requests.
If the program doesn't work:
Most users who have downloaded and used this program have no problem with it. If there are problems, then most likely the problem is in the system on which the error occurs. The author recommends Windows Repair (All In One) for the following:
01 - Reset registry permissions
03 - Registration of system files
04 - WMI Repair
18 - Repairing the Volume Shadow Copy Service
25 - Restore important Windows services
26 - Setting the default value for starting Windows services
Or reinstall Windows.
Reg files:
No need to use with UAC disabled
Restore Point Creator forced UAC Prompt.reg
Create checkpoint without UAC prompt
Restore Point Creator no UAC Prompt.reg
Returns a query when a checkpoint was created.
About the portable version:
Provided by the developer, no installation required.
