Today we will deal with the GUI error on Android. Everything is quite primitive and simple. First, let's understand what a graphical interface is. In fact, this is a kind of shell of the Android operating system. For example, inside the body there are organs that are covered with a membrane (skin and so on). It is the same here, although it is difficult to find the correct comparison, since the shell acts not only as a kind of external covering, but also as a bridge between the code and the user understanding. Thanks to the shell, you do not need to write code every time, you just poke at the desired icon to perform the desired action.
What is the reason?
GUI error is often caused by a software glitch. For example, you installed an application that interferes with the work of the standard launcher or shell, in general. It may also be that after a flashing such a problem appears due to the fact that you have not done all the wipes (complete cleaning) and the tails from the previous ROM are left.
As a result, we have the following situations:
- GUI error after flashing
- Error graph. interface due to a launcher or other third-party software
How to fix
The easiest and most effective way to fix the GUI problem is to perform a factory reset. By the way, this is the only method if the error appeared after flashing and as an extreme method, if the error occurred after installing the launcher or other third-party software.
If these methods did not help either, then you can try to reflash the smartphones, perhaps the matter is in the firmware. As a last resort, the matter lies in the hardware, then you need to carry the device to the service center.
Software errors in the Android operating system occur quite often, most users find unpleasant moments in use. Today's article is devoted to the problem of the operating system in which the message “ system graphical interface error". In the course of the article, we will consider a possible problem, and then give advice on how to eliminate this problem.
Having collected information in various Internet resources, we identified common causes of the error.
- System conflict with any of the installed applications, games and other software, what to do in this case, read the paragraph below;
- The problem appeared after the action of the virus, while the files necessary for the full functioning of the system were damaged or deleted. The virus can "eat" such files. What for? Either they interfere with it, threaten its detection, and then they must be overwritten, deleted, or simply to harm users;
- Blocked system graphical interface cache. It is rare, but it has a place to be;
- If you have the "Launcher" installed (the launcher is a shell of the system. Everything that you see on the screen when using the smartphone is displayed by the launcher). It can be damaged or also be affected by the virus;
How to fix GUI errors
We figured out the reasons, let's talk about ways to eliminate the conflict. Try to remember if the error appeared after installing any application or popped up "suddenly".
If the message appears after installing the software, we recommend the following operations:
When a graphical interface crash is caused by a virus, the situation becomes more complicated, everywhere it is immediately advised to do general reset to factory settings - it helped very few people and here's why.
General reset when solving a problem
Master reset - will return the smartphone configuration to factory settings. In other words, all third-party programs and information will be deleted. The theme settings, language settings, and account settings will be reset. When a malware enters the device, it deletes some files embedded in the system, system files. Making a general reset will roll back the settings, but deleted files will not be restored.
Flashing smartphone
Re-flashing 100% and a proven way to combat this problem. Mentally accept the fact that you have to demolish all the data, first save your contacts, photos, music.
Do not make "application backup", the virus will remain in the infected files.
Apps and games are easy to download in a couple of hours from the Play Market.
If you have recovery installed on your phone, flash from there. To get into the recovery on the switched off phone, you need to hold down the "volume +" button and turn it on. When the menu opens, select and activate the item " Wipe data / Factory Setting«.
If the words of recovery and firmware are not familiar to you - there is a lot of information on the Internet for any phone, you should flip it with caution so as not to turn the phone into a brick. If you don't have the time and knowledge to dig, entrust this business to professionals or a service center.
I hope you figured out the reasons when the graphical interface of the system crashes in the application and you know how to fix the situation. If you know of proven ways to resolve this conflict - write in the comments, we will definitely add them to our article, ask questions.
A small video on troubleshooting for 5 versions of Android firmware, test for your system:
(14
estimates, average: 4,71
out of 5)
Discussion: 9 comments
Throwing an error or just nothing happening?
The icon that informs me about the problem does not go away. I cannot perform any function on the tablet.
Answer
System interface: I am trying to clear the cache, the command fails, what could be the reason?
Answer
Make sure your device is fully charged before you start updating your operating system. It is important to eliminate the likelihood of disconnection. You can connect the gadget to the charger during the procedure. If the tablet or smartphone turns off during the firmware update, system and data loss will occur.
Check the version of the android operating system that is relevant for your device, as well as find out what firmware is currently installed. You can clarify this information in the device settings in the "About phone" section. Pay attention to the android version, kernel version and build number.
Now, based on these data, you need to find and download a new firmware that will fully match your smartphone or tablet model.
HOW TO FLASH ANDROID USING A COMPUTER
It should be said that there are several ways to flash Android and in this article we will look at the most common ones. Let's start by flashing the gadget using a special program that is pre-installed on the computer. There are many applications that allow you to install a new version of the OS on your device, but we decided to stick with the Fastboot program, since it is safe, convenient and reliable, and also best suited for the model that we will be flashing as an example. So, let's figure out how to reflash Android using the Fastboot booster.
Note: the program for flashing Android should be chosen based on which manufacturer's device you are using. We recommend that you familiarize yourself with the following program list
First of all, you need to download this application. There will be no problems with the search for Fastboot, it is enough to be able to use search engines, and today everyone can do it. Download the program and unpack it to the root of the C drive so that the file path looks like this: C: \ Android.
The "Tools" folder contains the necessary utilities, and the "Driver" directory contains the drivers. Now you need to connect to the computer the device that you plan to reflash and install the driver. As a rule, the device automatically finds the necessary drivers, but sometimes this does not happen. In this case, you need to open the website of the manufacturer of your smartphone or tablet and download the software. Please note that the firmware that you plan to download is suitable for your gadget model. The firmware must be downloaded in .zip format and placed in the Tools folder, which is located here: C: \ Android.
Before you can flash an android, you need to unlock the bootloader on your device. The bootloader unlocking process will differ depending on the specific gadget model. Open the Start menu on your computer, type cmd in the search bar, and select cmd.exe.
In the Command Prompt window, enter cd C: \ Android \ Tools. Confirm the command by pressing the Enter key, after which you will find yourself in the "Tools" directory.
Now you need to enter a command command that looks like this: fastboot devices.
If you were given a device code, then fastboot detected your smartphone or tablet and you can start flashing the android. If the window says "waiting for device", you need to turn off the gadget and install the drivers. Now you need to enter the command for the firmware: fastboot update firmware_file_name.zip After that, the flashing will start. Remember to reboot your device after finishing the operating system update.
HOW TO RESET ANDROID THROUGH RECOVERY
Another way to reflash Android is to use standard recovery or custom ones (TWRP \ CWM). What are custom recovery we will explain in more detail below. In short, these are unofficial firmware. So, find the firmware that suits you on the Internet, download it and save it to the root of the file system of your device.
Reboot your device into recovery mode. Login process
Software errors in the Android operating system occur quite often, most users find unpleasant moments in use. Today's article is devoted to the problem of the operating system in which the message "error system graphical interface" pops up on the screen. In the course of the article, we will consider a possible problem, and then give advice on how to eliminate this problem.
An error has occurred in the GUI application - reasons
Having collected information in various Internet resources, we identified common causes of the error.
How to fix GUI errors
We figured out the reasons, let's talk about ways to eliminate the conflict. Try to remember if the error appeared after installing any application or popped up "suddenly".
If the message appears after installing the software, we recommend the following operations:
When a graphical interface failure is caused by a virus, the situation becomes more complicated, everywhere it is immediately advised to do a general reset to the factory settings - this helped few people and here's why.
General reset when solving a problem
Master reset - will return the smartphone configuration to factory settings. In other words, all third-party programs and information will be deleted. The theme settings, language settings, and account settings will be reset. When a malware enters the device, it deletes some files embedded in the system, system files. Making a general reset will roll back the settings, but deleted files will not be restored.
Flashing smartphone
Re-flashing 100% and a proven way to combat this problem. Mentally accept the fact that you have to demolish all the data, first save your contacts, photos, music.
Apps and games are easy to download in a couple of hours from the Play Market.
If you have recovery installed on your phone, flash from there. To get into the recovery on the switched off phone, you need to hold down the "volume +" button and turn it on. When the menu opens, use the volume keys to select and activate the item "Wipe data / Factory Setting".
If the words of recovery and firmware are not familiar to you - there is a lot of information on the Internet for any phone, you should flip it with caution so as not to turn the phone into a brick. If you don't have the time and knowledge to dig, entrust this business to professionals or a service center.
I hope you figured out the reasons when the graphical interface of the system crashes in the application and you know how to fix the situation. If you know of proven ways to resolve this conflict - write in the comments, we will definitely add them to our article, ask questions.
A small video on troubleshooting for 5 versions of Android firmware, test for your system.
