Extraneous noise in the headphones when connected to a computer. Why do headphones hiss and wheeze?

Headphones are very simple devices, and, as a rule, they are reliably protected from various sound distortions. But, like any other acoustic device, under the influence of various factors, they can wheeze, creak, flicker - the sound can deteriorate in different ways, but the essence is always the same. This can both spoil the sound experience of the headphones, and even make listening to music impossible with their help. What if the sound in the headphones is distorted in one way or another?

Why can headphones make phonies?

The background in the speakers, whether they are headphones or radiators of any other acoustic device, is usually caused by physical impact to the device. In the case of speakers, the background can be caused, for example, by the amplifier if it is incorrectly connected, or even by neighboring speakers.

Very often, the speakers start to glow if a call comes to the phone lying next to them. Everyone knows this unpleasant high-pitched squeak and buzz - if in your case this is exactly the reason, it is enough to move the phone away from the headphones, and the background will disappear.

In addition to other electronics, hum can be caused by poor wire shielding. In this case, the background appears when the headphone wire or the connector to which they are connected comes into contact with metal. Most often, this situation manifests itself when you connect headphones to line-out on the front personal computer... This output connects to motherboard with the help of very flimsy wires on which it acts metal case system unit, which leads to the background in the headphones. To get rid of the hum, just wiggle these wires. But this will not completely solve the problem - so that the background does not appear anymore, you need to either glue the case with aluminum foil from the inside, or simply connect the headphones to another connector - for example, on the speakers or on the back of the computer.

One more possible problem causing the background in the headphones - a breakdown of the sound card or a malfunction of its drivers. If the board breaks down, you will have to replace it or repair it in service center... Drivers can be replaced by yourself. To do this, you need to find out the model of the sound card in the device manager, which is available in the properties menu of the computer running the operating Windows systems... After that, you need to go to the website of the sound card manufacturer and download the necessary software.

Background in headphones when connected to a phone

If the headphones are connected to a mobile phone rather than a computer, the hum may be caused by a mismatch between the headphone plug and the connector on the smartphone. The fact is that headphones manufactured before 2011 and after 2011 have a different order of contacts on the plug.

TRS plug (tip, ring, sleeve) used in headphones and headsets for mobile phones, has four pins, two of which are used for audio output, the third is for audio input from a microphone, and the fourth is ground. In headphones manufactured after 2011, the order of connecting the contacts has changed - the ground and the microphone have changed places. The connector in the phones has changed accordingly. Therefore, when connecting old headphones to modern phone or vice versa, the connection may go wrong, which leads to the appearance of hum in the speakers - the device is not grounded as it should.

Causes of other sound distortions

Background is not the most common, although the most unpleasant of the possible sound distortions generated by the dynamic radiators of headphones. Much more often the sound just becomes quieter and louder, wheezes, creaks. This can manifest itself both in any conditions and only at certain frequencies, at a certain volume, or when connected to a specific sound source. The reasons for this behavior of headphones, respectively, can be very different.

Before understanding possible breakdowns, it is worth excluding the most simple options... So, the sound can be distorted in a situation in which headphones are usually used because of their indispensability - namely, when listening to the radio from a phone. In this case, the headphones play the role of an antenna, so the FM receiver simply does not work without them. If the sound is distorted in such a situation, the reason is most likely not in the headphones themselves, but in the radio - either the radio is faulty, or the place where you are has poor reception.

But this is very special case... In general, the headphones creak and wheeze, as a rule, due to mechanical stress on the plug and wires of the device. In order for the headphones to work properly, and the sound in them is clear, the wire must be solid, and its ends must be securely connected to the contacts on the plug and on the speaker. Thus, the design of the headphones is very simple, but often fragile - careless handling of the device and regular mechanical stress on it, especially at the points of contact of the wire with other parts, leads to the fact that the cable is frayed, loses its insulation, which is why distortions appear. sound.

All causes of wheezing and squeaking one way or another boil down to cable damage. This can happen in three areas:

• at the junction of wires with a dynamic emitter;
• in one of the places along the entire length of the cable;
• where the wire is connected to the plug.

Due to the loss of insulation, the wires carrying the signal for different channels, interfere with each other, which leads to sound distortion. If the wire moves away from the contacts, the sound will first start to deteriorate, and then it will completely disappear, so the cause of wheezing must be eliminated immediately after detection so that the headphones do not finally break down.

Cable repair

Unlike copper wire breaks, which can be calculated with a multimeter, wire insulation loosening is not easy to detect. To do this, you will have to carefully examine every millimeter of the cable length, twisting it in all directions until the sound stops distorting. When you find a spot where the sound is clear again, the breakage can be repaired. In this case, you do not need to cut the wire.

In the designated place, using a sharp clerical knife, the cable sheath is peeled off. Underneath it you will find three wires - two of them conduct the signal to the speakers, the third grounding the device. They should all be kept separate from each other. To restore the deteriorated insulation, it is enough to wrap each of the wires with electrical tape, and then cover the place of repair with heat shrink tape.

Plug repair

Audio distortion can be caused by two plug problems:

• separation of wires from contacts;
• contact of individual wires with each other.

In any case, the easiest way is to replace the plug. For this, the old part is cut off, the cable is stripped of winding and insulation. The stripped cores are then soldered to the corresponding contacts at the base of the new plug and are reliably isolated from each other.

Speaker repair

This operation is not so simple and is only possible if the headphone case is easily disassembled - if disassembly plastic case speakers are not provided, the repair simply does not make sense - even if the sound is corrected, it will still be impossible to use the headphones.

If the headphone case has screws that hold the individual parts together, and you can disassemble it, do so. Copper conductors of the cable must be connected to the radiator - if one of them is not held securely, solder it. The contacts must be isolated.

Thus, it is possible to correct the distortion of the sound, but it is not always easy. Before attempting to repair headphones, make sure that the problem is with them and not with other equipment.

Almost all home computers and laptops are used for work, participation in various game processes traveling through social networks and other sites and, of course, you cannot do without playing audio and video recordings.

For this reason, users have connected special speakers or headphones to most of the devices. These elements help to improve the sound and increase its volume. In some cases, both of these components are used.

But when using the speakers, not only necessary, but also extraneous sounds can occur. It can be a variety of noises. Quite often, users face this kind of difficulty. But since it interferes with enjoying watching a movie or the sound of your beloved musical composition, then you need to try to understand this issue and eliminate it.

This question cannot be called simple, although at first glance, this is exactly the impression that users have. In fact, the appearance of crackling, trembling, and various other noises is provoked by a variety of reasons.

But it is pointless to consider all the reasons, since this process is incredibly long. So it is worth concentrating on the most common scenarios that provoke the appearance of such a problem.

But first, it is worth checking the performance of the speakers, headphones and connectors directly into which these elements are connected. To do this, you should use a third-party device. You will need to connect these components to it. You will need to plug in other speakers and headphones to test the connectors. If everything is in order with this, then it is worth considering other options for the reasons.

Checking for the required drivers

Extraneous sounds can appear in the most different options... But if they have already arisen, then it is imperative to understand that this problem cannot be eliminated on its own. So let's start looking for reasons and quick elimination malfunctions.

Anything could be due to driver issues. Very often, users can note the incorrect functioning of the gadget, since it lacks several drivers or they are outdated. The reason is trivial, but at the same time, due to these components, the device may stop.

If no special drivers are installed, then the sound may not be played at all. Incorrect operation is also noted in cases where the drivers were installed completely wrong. It is extremely important that only those elements are downloaded to the device that are 100% suitable for the gadget being used.

Otherwise, a variety of program malfunctions will begin. As a result, the sound card will not provide sound playback in correct mode... In general, the operation of numerous elements is disrupted, which together ensure the reliable functioning of the device.

That is why, in the end, and therefore, various noises appear. Problems of this nature can be companions to the process of reinstalling the operating system. That is, when the user performed boot Windows or updated the system, then there are difficulties with the drivers.

The user can find out about this from the corresponding notification, which will be shown on the PC screen. To check if the work is doing correctly or not, you will need to go to the Task Manager. To do this, we activate this assistant.

This can be done using several keys or by going to the Control Panel, which is located in the main menu on the desktop. Next, go to the equipment and sound section. And after that, several sections will appear, among which you can find the Task Manager.

After that, you need to open a tab called "Audio Inputs and Audio Outputs". Now you need to carefully look at whether the devices are indicated opposite exclamation marks yellow or red. If none are visible, then the problem is not related to the drivers.

But if suddenly they are present, then the problem has arisen with these elements. In this case, you will need to check that all the necessary components are present. If necessary, all that remains is to load the missing objects. After that, there should be no more difficulties with the sound. But this is if the drivers were the culprit.

Cable difficulties. Common cause of noise

It is not uncommon for users to have to deal with a cable that is not working properly. This is one of the most common reasons. As a result, extraneous sounds, noises, crackling, etc. may appear.

The problem lies in the poor contact between the speaker and the sound card. Contact for the most different reasons... This is most often due to the fact that the cable may be loose. At the same time, it can move to different positions, being damaged.

So that the best way out is attaching a cable to a wall or piece of furniture. In this case, it will constantly be in one position and not be damaged by people and animals.

Also, there are frequent cases of damage not to the entire cable, but to its individual parts. In this case, the sound may be lost not in two speakers, but in one. To verify this kind of damage, you should install the headphones to another device. During testing, it will be possible to identify the true cause. This means that it will be possible to eliminate its consequences.

Still can be revealed bad contact between the network card slot of the machine and the plug of the headphones connected to it. Sometimes the way out of the situation can be some manipulation of the plug. You can try to remove it, and then insert it again.

You can also try it a little and rotate it very carefully. We turn in any direction and check whether the connection is secured or not. In some cases, the data simple actions able to help.

In any case, you need to keep track of exactly how the cable is placed. It must always be fixed to the floor or wall. In this position, it will be least damaged during use. Also, you should not move the cable every time, rotate and perform other manipulations that can harm the signals transmitted through it.

Also, difficulties often arise for other reasons. If this element is too long, then you should not be surprised by extraneous sounds. This is due to the fact that the cable is often bent. In this position, it transmits a signal with damage. So you should make its length optimal size and the problem will be fixed.

Adjusting sound parameters

Often difficulties arise for this very reason. It is difficult even to imagine that correct setting playback settings can improve sound quality. But if the user did not correctly configure the settings, then noises and other sounds may appear.

In this case, the user may not even guess that he previously performed some actions incorrectly. Often enough different kinds noise may be observed due to the switched on PC Beer and line-in. Often wrong setting provokes changes in the frequency parameters.

This is further reflected in the sound quality. In this aspect, it is necessary to take into account the peculiarities of the device used, since for each device the settings are made individually. Correction of sound data is made in the control panel.

Users will need to go to the section with sound and equipment. Then open the tab with the volume settings. Now an icon with a speaker image will appear, on which you will need to click. This will open the device properties and appear as Speakers and Headphones.

Users should slightly decrease the signal level, as well as make some other adjustments regarding the PC Beer section. It is necessary to view the data that is indicated in the parameters of the CD, as well as in the tab with line input.

As soon as the work is completed, it is imperative to save the entered information. In some cases, after this kind of manipulation, the reproduced sound becomes much cleaner and more beautiful. So don't neglect customization.

Poor quality equipment

Some users prefer to buy inexpensive goods, but at the same time require from them High Quality... But this is extremely rare. Often, users notice a decrease in the quality of the reproduced sound.

The thing is, it is impossible to use expensive parts when creating inexpensive speakers and headphones. Therefore, you should not demand something supernatural from such components. Inexpensive models will not be able to provide excellent sound. Especially do not set the volume level to maximum, since in this case, interference will especially appear.

You should always adjust the volume level not only directly on the speakers, but also on the computer you are using. Only in the case of achieving harmony can sound be achieved good quality... In general, you shouldn't economize if great sound is the goal.

Other reasons: grounding and power supply

This problem may appear if the speakers pass through themselves electrical signals... They also pass through the body of the personal computer. That is why you should not be surprised that various external noises arise, which, in theory, should not be.

In order to exclude this problem, you will need to apply an incredibly easy-to-implement trick. It consists in ensuring the connection of the device case with the battery. All of this is done using conventional cable or cord. It is possible to eliminate interference in this way if the cause was directly related to grounding.

But also difficulties can arise due to the power supply. Since this problem only applies to laptops, it does not threaten users of stationary devices. So laptop users can try to check sound card for food. If it is not enough, then this provokes the appearance of third-party noise.

You can check this in the power supply tab. You can find it in the main menu. We click on the "Start" button, after which many sections will appear, among which the Control Panel will certainly appear. Next, we find the section with the system and security.

Now all that remains is to enter the tab with the power supply. In it, you must specify the level of performance that you need. We choose maximum value... In the tab with additional parameters should indicate desired value... This section is often hidden. So there is no need to be intimidated by this.

Immediately after the performed manipulations, we try to connect the gadget to a power supply network. Only then can you try again to check the sound quality. If everything is in order, then the problem was related to the lack of power.

There is also another type of noise that may be uncommon. It manifests itself in the fact that when you scroll the mouse, this sound can be clearly heard in the headphones or in the speakers, if they are connected. It may not be that annoying for some, but separate group users are very stressed by this.

Therefore, it is necessary to consider this version of the error as well. The reasons can also be very different. Therefore, it is extremely difficult to establish the real "culprit" of this. So it is worth trying to perform a few manipulations that will really help.

You can also resort to implementing a mouse connection from a different port or use a completely different mouse. Can also be purchased instead wired option wireless. This can help in some situations. So problems with the mouse can also trigger abnormal noises.

Whatever the cause, you can identify it, and then make every necessary effort to eliminate its consequences. This instruction will certainly help.

Causes of noise in headphones:

You connected headphones to a computer or laptop, and instead of pleasant and favorite music you hear an annoying hiss or crackling noise, who will like that? At the same time, you do not understand why there is noise in the headphones, where it came from and what to do with it.

The most annoying thing about the noise effect in headphones is that it is very difficult to figure out why it appeared and how to fix it. There can be a lot of reasons for the cracking in headphones, the usual search algorithm for the cause bad job the headphone consists in sequential enumeration of potential noise sources, their exclusion or isolation, and further verification. In theory, this looks simple, but in practice, such an algorithm is completely impossible to implement.

For example, you have only one computer, which is connected to an outlet that is embedded in a concrete wall, the apartment has been renovated and it is impossible to install the computer in another place, or another room, because there is no room for him. And therefore, we are unable to exclude all possible reasons for the occurrence of extraneous noise in the headphones.

However, we can start with the simplest and most obvious potential causes of interference in headphones, and if their verification will not work, then we will only have to hope that this problem will eliminate itself in the future. For example, the neighbors will turn off the hammer drill, or after a while you will buy a voltage stabilizer through which you connect your computer.

So, let's start looking for the cause of the hiss in the headphones.

Damaged cable is a very common cause of hiss and crackles in headphones.

Let's start with the simplest and most common cause of extraneous noise in headphones - a damaged cable or poor contact in the socket.

Take a close look at the headphone cable, it must be absolutely intact, there must be the same density throughout its entire length. Feel the entire cable with your hands, perhaps there was an interruption in some place inside the cable, or once you bent the cable too much and the copper cores inside it broke.

If, after visual and tactile inspection, the cable is not suspicious, check the jack, its joints and the very audio jack into which you plug the headphones.

Check how well you insert the jack into the jack, it should fit easily, with a slight click and hold firmly in it. The jack must go into the socket all the way, there must be no visible part of the jack.

Sometimes, due to the peculiarities of the structure of the nest, about 1 mm of the jack remains visible, but no more, and this phenomenon is rare.

Poor contact is one of the most common causes of noise and crackling in headphones. Wipe the jack with a dry soft cloth, it may be dirty or covered with a layer of oxide.

If the wire does not arouse suspicion and the jack is connected to the jack securely, but the noise remains, you need to continue the search.

Headphone technical condition - a possible cause of white noise

After checking the wire and jack has not yielded a result, you must definitely check the headphones themselves.

Examine them carefully, they may have recently fallen on a hard surface, cracks or other signs of damage have appeared on the case.

Be sure to try connecting the headphones to another audio source, such as a phone, TV, or tablet.

It is very important to understand and establish that the cause of the white noise in the headphones is not the headphones themselves, but the device to which they are connected.

If, when connected to another device, the white noise disappeared, then the headphones themselves are in order along with the wire and jack, and we go to further search the occurrence of cod.

Inexpensive speakers can cause noise in headphones

If headphone noise occurs when connected to a computer or laptop that has inexpensive multimedia speakers connected at the same time, the first step is to turn off the speakers and check if the noise in the headphones has disappeared.

The fact is that inexpensive speakers are assembled from cheap elements, but the most important thing is that when assembling them, they greatly save on soldering, wires and general level constructions. Therefore, poor contact or short circuits may occur inside the speakers, which will induce interference throughout electrical circuit, as a result of which the headphones may appear extraneous noise.

The speakers must be turned off completely, and not just turned off their power.

If completely disconnecting the speakers from the computer did not help eliminate the noise in the headphones, go to next step troubleshooting.

Lack of grounding is the most common cause of noise in headphones when connected to a computer

For some reason unknown to me, sockets in many homes are not grounded. V general case it's not so scary, traditional Appliances irons, heaters, filters and air conditioners are working normally. But as soon as you connect equipment that is very sensitive to the quality of the power supply to an ungrounded power grid, problems immediately pop up.

A computer connected to an ungrounded outlet is a direct cost not only to noise in headphones, but also possible reason failure of the computer entirely due to exposure to static electricity.

The normal workaround for this problem is to ground the electrical outlet that the computer is connected to. But doing it yourself is not easy, if not impossible. To do this, you need to call an electrician, however, in this case, most likely, you will have to rewire the wiring throughout the apartment, and this is already a serious repair.

There is a simple way to check if grounding will actually help eliminate noise in the headphones - to throw a wire from the computer to the battery.

You need to take the usual copper wire small section, with bare contacts on both sides. Lean one end against the computer case (preferably against the back wall), and the other against the battery. Leaning the wire against the painted part of the battery is useless, you need to lean against the metal of the battery, so you have to look for such a place. Bare metal can usually be found on the back of the battery.

If you did everything correctly, and the noise is gone or significantly reduced, then the matter is in grounding.

Remember: grounding through the battery cannot be considered permanent decision... Such grounding can lead to the complete failure of the entire computer; it is enough for your neighbor to ground serious equipment to the battery, as the computer, having received a powerful discharge of electricity on the case, will fail. This is just a way to check, nothing more.

But what if you know for sure that the sockets are grounded, and the test with the wire yielded nothing? We continue to search for a crack in the headphones.

Microphone noise is one of the many causes of noise in headphones

We have considered possible sources problems of noise in headphones, which relate to material interference, but now we are left with problems that relate to setting up computer equipment.

One of the most common causes of noise in headphones is noise from the microphone of a sound card.

Even if a microphone is not connected to your sound card, noise may be generated from the microphone jack.

In order to test this hypothesis, you need to go to the sound volume settings of your sound card, find the slider that adjusts the microphone volume level and reduce it to zero. Or, if there is such a possibility, turn off the sound from the microphone altogether.

If the reason for the noise in the headphones was the microphone input, then muting the sound from it should completely correct the situation.

In order to get to the microphone volume settings, open the control panel, find the item "Equipment and Sound" and go to it.

Now find the item "Sound" and go to it.

In the sound settings window go to the tab "Record", then find the active microphone (in my case, this is the Sound Blaster ZxR microphone), select it and click on the button "Properties" in the lower right corner.

In the new window find the tab "Levels", and either slide the microphone volume slider to the maximum left until its value reaches zero, or click on the blue speaker icon to the right of the volume indicator. A red crossed-out mark should appear next to the speaker. This icon will indicate that the microphone is completely disabled in the system. It is preferable to turn it off, and not just to lower the volume level.

One type of problem with a microphone input, or the microphone itself, is its high sensitivity. This problem can be solved by turning on the microphone noise canceling mode.

Almost all modern sound cards have such a mode. If you find out that the microphone is the cause of the crackling, but you need it, then try turning on the noise canceling mode if you have one. This should fix the problem.

A problem with the volume level of sound sources in the sound card may be causing hiss in the headphones

Not only can noise from the microphone cause hiss in the headphones, the same noise can also be generated by the adjacent inputs of the sound card.

Depending on the model of the sound card, it may have additional inputs to connect additional equipment... They can have the following names:

1. What U Hear
2. Line in
3. S / PDIF

Any of them, under a certain set of circumstances, can become a source of interference. Just as you turned down the microphone volume, you need to turn down or completely mute the sound from all of these jacks.

To do this, go to the Windows Control Panel.

Then find the item there "Equipment and Sound".

Then click on the section "Sound".

In the new window, go to the "Playback" tab, select the active speakers (a device that plays sound through the headphones in this moment) and click on the "Property" button.

Further, I cannot take a screenshot, tk. in my case, the volume level of all inputs and outputs is regulated through special software which controls my Sound Blaster, in your case the tab will most likely be available "Levels", by going into which you can turn off all the inputs and outputs of your sound card.

To check, leave only the headphone output turned on, and turn off all other possible outputs and inputs or lower their volume to zero.

If the headphone hiss problem was at one of these points, it should disappear.

Volume level - paradoxical, but true, it can cause interference in headphones

In some cases, the volume level may cause interference to the headphones.

Sometimes it happens that the headphones have their own volume control, plus there is an additional volume control in Windows, and there is also a volume control in the application from which you listen to the sound (game, player).

In order for any hardware that has its own hardware volume control to work well, you need to make sure that all software volume controls (especially the main volume slider in Windows) are set to 100%. And the final volume control is done with the hardware volume control.

To eliminate hiss, follow these steps:

1. Completely mute the sound in the headphones using the hardware control (buttons or knobs on the headphones themselves)
2. Set the volume in Windows to 100%
3. Set the volume in the app to 100%
4. Start gradually adding the volume on your headphones and bring it to a comfortable level.

The fact is that the software volume controls artificially reduce the volume of the sound, after which you have to crank the volume in the headphones to the maximum in order to listen to it at a comfortable level. However, for any technique, be it headphones, speakers or a car engine, long work at the limit of the possible is extremely detrimental to the characteristics and properties of the unit.

By setting the hardware volume to the maximum volume on the headphones, you amplify all the noise that comes from the computer, plus you add distortion that appears in the headphones themselves on maximum level sound.

Therefore, you need to adjust the volume using the method that I indicated in order to minimize possible distortion and noise from the headphones themselves, as well as remove the artificial amplification of unwanted noise.

Connecting any device to a computer is a process that requires special attention... The more complex the peripheral component, the more difficult the procedure is. Very often, headphones / speakers and microphones are connected to computers. These elements help you communicate online. It is very difficult to imagine a modern user without them.

On the one hand, connecting headphones and a microphone does not require anything special. Only after the implementation of the idea in life, it is often necessary to set up these components for a long time. They don't work well. Most often, users think about how to remove noise from headphones on a computer. Why does he appear at all? What will it take to fix the problem? And can you really get rid of it? If you can answer all questions asked, plugging in a headset and working with sound on a PC won't be a hassle.

Why is there noise

Initially, it is important to understand where the noise in the headphones comes from. Many users face this problem. Sometimes this is a temporary phenomenon, in some cases the noise does not disappear for a long time.

In fact, the nature of the problem is varied. Noises in headphones (with or without a microphone) occur for a variety of reasons. It is problematic to predict what kind of alignment helps to correct the situation. For example, noise can be caused by hardware damage or out of order. The next step is to figure out how to get rid of the noise on the computer.

Sound card

The first reason that can affect the sound quality in operating system- this is bad If it is damaged or out of date, noise appears in the headphones.

The sound "breaks", various crackles, creaks and other noises may appear in the headphones or speakers. The situation is corrected only by replacing or repairing the sound card. Only then will the headphones disappear.

Earthing

The next problem is very rare. We are talking about the lack of grounding at the sockets to which the headset and speakers / headphones are connected in general. V in this case all sorts of noises may appear.

If it comes on a laptop, it is likely that plugging the computer into a grounded outlet will not fix the problem. As a rule, laptops have boards on mother card may not be grounded. We'll either have to replace them, or come to terms with the problem. In some cases, users prefer not to use a particular laptop.

USB devices

Do you hear noise in the headphones on your computer? Usually, different kinds of sounds occur when connecting various devices. They appear immediately, not after a while.

For example, when attaching a mouse, you may hear a monotonous sound. And if we are talking about the keyboard, most likely, you will hear clicks when you press the keys.

This happens due to:

1. Active transfer of information to the computer. Then it is recommended not to connect USB devices to these or those ports. It is advisable to find other places. Or even start using a wireless headset and other devices.
2. Damaged USB port. It is suggested to carry out a repair. In practice, users simply reconnect all devices to different ports.

Fortunately, similar situation not very common. Modern computers and laptops are designed so that users can work in comfort. Therefore, such an alignment is unlikely to occur in practice.

Cable

How to remove noise from headphones on a computer? Much depends on what kind of headset the user has. The thing is that now all devices are divided into wired and wireless. This feature plays an important role.

Often, noise in speakers or headphones is found on models that are connected via a cable. This is the main problem. For example, if a cable is damaged from a microphone or headphones, all sorts of noises occur. This happens due to poor quality information transfer to the sound card.

It is likely that the cable is damaged. Then the breakdown must be eliminated. If you are using wireless, such a layout will not help.

Another technique that is advised for users with wired headset is to unplug the cord and plug it back into the computer. It is this method that often helps to get rid of noise.

Drivers

But the next source of the problem is relevant for all devices. But in practice, it is rare. The point is that loud noise headphones on your computer is a result of damage or missing sound card driver or device.

In such a case, you just need to reinstall or update the corresponding software package for normal work operating system with the connected device. Have wireless headphone, as a rule, the corresponding drivers are included in the kit on separate disk... As a last resort, you can download them from the website of the manufacturer of your sound card or headset.

Maximum sound - problems are assured

Background noise in headphones of any model is often encountered when the sound settings are incorrectly set. It doesn't matter if a microphone is connected to the PC or not. Indeed, in this situation, nothing depends on him.

If the sound settings are set to maximum, you may experience noise or wheezing on your computer. Users who buy cheap speakers or headsets suffer from a similar problem.

Everything is corrected simply - by reducing the sound. For example, through a mixer in the operating system. You just need to click on the gramophone image (near the hour and date), then move the slider down. So that the noise disappears. Nothing difficult or special. That is why it is recommended to buy headphones of an average cost. They With a similar problem collide less often.

Microphone - good or bad

Now it is clear how to remove noise from headphones on a computer. But these are not all methods that can help. What if all the previously listed scenarios did not fit?

The presence of a microphone on the PC plays an important role. It is he who often becomes the source of noise in headphones. What to do?

It is clearly not worth giving up the microphone. Instead, you will have to make small adjustments to the sensitivity and volume of the device. Then you will be able to get rid of unnecessary noise.

How to do it? Required to follow small instructions... It looks something like this:

1. Load your computer. Be sure to connect a headset with a microphone.
2. Click on the mixer on the right side of the RMB screen. In the menu that appears, click on "Sound recorders ...".
3. Find the connected microphone. Double click on the corresponding line.
4. Go to the "Levels" tab.
5. Adjust the volume and sensitivity of the microphone by moving the sliders. If there is a PC Beep, turn it off (move the volume label to zero).
6. In the "Improvements" section, check the box next to "Reduce noise level". You can also check the "Remove constant component" item.

All this will help to get rid of the noise in the headset very quickly. How do I set the correct microphone settings? This is an individual component, each user independently selects the option that suits him.

Conclusions and conclusions

It doesn't matter which headset is connected to the computer - wired or not. The main thing is that the bulk of the problems are found on all device models. for a computer with a microphone are connected and used most often without much difficulty. And the main reason for the noise in the headset is the high sensitivity of the microphone, as well as the really loud environment around the user.

How to remove noise from headphones? All of the above techniques will definitely help to correct the situation. When it comes to wireless headset, then in case of constant noise, it is recommended to change the USB socket used as a receiver. Otherwise, all the tips listed earlier remain the same.

Extraneous noise in headphones occasionally occurs due to infection with viruses. After the computer is disinfected, the headset starts working properly. Fortunately, these kinds of events are not that frequent. And the main methods of dealing with the problem under study are to reinstall the driver, reduce and adjust the microphone. From now on, it is clear how to remove noise from headphones on a computer.

It is almost impossible to imagine the work of a computer without sound. This is especially true for entertainment, video games without soundtrack are not interesting, movies with subtitles also make no sense, and listening to music becomes impossible. Sound is necessary, so each user has a speaker or several, or headphones. These devices are necessary, but no one wants to shell out for expensive options, people buy cheap audio systems that eventually fail or start to junk. But what can I say, crackling in computer speakers and other extraneous sounds can appear even in expensive devices.

Noise can appear due to the operation of the computer, the operating system is loaded, the information is processed, all this is accompanied by unpleasant crackles and squeaks. Fortunately, the problem can be solved, but first you need to find out what is the reason for the appearance of unnecessary sounds.

Throwing away the old device and buying a new one is an extreme method of solving the problem. In fact, noise in headphones or speakers may appear due to damage or wrong connection wires, drivers and even Windows settings.

CONNECTION CORD PROBLEMS

Often the hiss sound occurs when the sound card of the PC and the device for sound reproduction are poorly connected. There are three options here:

• The connection wire is damaged. This causes not only interference in the speakers of the computer, but also such a problem when only one of the speakers is working. It is not always possible to determine the location of the cable malfunction by eye, so it is better to connect the device to another computer and check.
• Contact between wire sound device and network card Bad quality.

• The wire is loose. When a draft wags the cord, or children play with the wires, noise is generated in the speakers. In such a situation, you need to attach the wire to a solid base; tape is suitable for this purpose.

It also happens that the problem appears due to the use of a long cord, the crackle is not strong, but it still causes inconvenience. Using a shorter wire will solve the problem.

FAILURES DUE TO DRIVERS

The operation of the computer depends on the drivers, and sound playback as well. When they are not installed, the user will not hear anything at all, and if the person downloaded the wrong driver, then the device will be disrupted.

Such malfunctions appear after updating the "firewood" or installing a new package. This problem is reported by Windows.

To check if these sounds in the headphones really appeared due to the drivers, we do the following manipulations:

• We go to the "Control Panel", there we already click on the "Hardware and Sound" icon and click on the "Task Manager" line;

• If there is no yellow or red warning icon, then there are no problems with the sound drivers. When such signs are present, then we fix the problems.

In any case, with available updates, you should do this. Perhaps the extraneous noise will disappear.

SETTINGS AND CONFIGURATIONS

Two or three accidentally placed marks next to unknown options can degrade the sound quality. Hissing in headphones appears when PCBeep is running and line inlet... Other functions, depending on the settings of the computer, can also affect the volume and quality.

fig. 1. We go to the "Control Panel" menu, select the "Hardware and Sound" icon and then click on the "Volume Adjustment" function

fig. 2. At the second stage of work, click LMB on the "Speakers and Headphones" icon

fig. 3. In the "Levels" menu there are PcBeep settings, CD, etc.

• We transfer all these functions to the value 0, save the configurations and check if this solved the problem.

In some situations, such simple manipulations really improve the quality of reproduction.

OTHER REASONS

DEVICE QUALITY

In the speakers, extraneous noise appears when the volume is increased. When this figure exceeds 50%, then noise, crackling and other unpleasant effects appear instead of music.

This problem plagues all owners of inexpensive devices, it is also called the "jitter" effect. Also, noises appear when the volume level of the speakers is set to maximum, and in the operating system, on the contrary, at minimum configurations.

In such a situation, we find the "golden mean"

It is almost impossible to solve the problem with "jitter" when increasing the volume. The only way out is to buy new speakers.

WEAK SOUND CARD

In most computers, this part is installed directly into the motherboard and is bought all together. Purchase a separate card is costly and is not a popular solution.

The increased frequencies of all boards form electromagnetic actions that do not interfere with the operation of the digital part of the device, but strongly affect the analog components, which is why the quality of reproduction decreases.

Inexpensive PCI options are slightly better in this issue, but they also have such a problem.

INCORRECT PLACEMENT OF PARTS

When the board is installed near the video card, the computer speakers begin to make noise. The fact is that the video card emits special signals that come to the sound card and generate noise.

If this is not possible, then we create a special reflective screen from cardboard and foil.

NO EARTHING

Therefore, a computer plugged into a regular power outlet will produce noise and crackling sound. In laptops, this problem cannot be solved, because in such a situation the board will not be grounded.

Extraneous sound and noise in headphones and speakers must be eliminated.