Latest firmware version asus rt n12. Connecting, flashing and setting up the ASUS RT N12 VP router

High quality ASUS products have provided this company with great popularity among users computer equipment. Modems produced by Asus are also no exception and are widely used due to their reliability and ease of use. The very first position in popularity has been deserved for more than ten years recent years holds the router stably ASUS versions RT N12 VP. Below are instructions on how to connect, reflash and configure this one of the most common and universal routers.

Brief description and characteristics of the device

The device has relatively compact dimensions: 179 x 128 x 28 cm. The device supports almost all existing standards: IPv4, IPv6, IEEE 802.11b, IEEE 802.3u, IEEE 802.11g, IEEE 802.3, IEEE 802.11n. It has high speed data transfer up to 300 Mbps. Two external antennas provide a large range of the created Wi-Fi zone. Operates at a frequency of 2.4 GHz. High security of the router owner's network is ensured by support Wi-Fi encryption: WPA-Enterprise, WPA2-Enterprise, 4-bit WEP, WPS support, 128-bit WEP, WPA-PSK, WPA2-PSK.

Preliminary activities

Before you begin entering parameters into the router interface, you must connect it correctly.

To do this you need to do the following:

Login to the interface

To enter the router settings interface, you will need to be authorized.

The action algorithm consists of just a few steps:

Factory reset

If the user, for example, when entering the standard “admin” and “admin” was unable to enter the interface, and also if frequent malfunctions occur in the device, etc., then you will need to reset the parameters to the default values. There are two ways to do this using the following methods: 1) through the settings menu, 2) mechanically.

Note: if the user does not know the exact password and login for authorization, then the second method should be used.

Method 1: Through the interface

The following steps should be taken:

1. Follow all steps 1 to 5 from the instructions described above and enter the device settings menu;
2. Next, go to the “Administration” tab;
3. Go to the “Management” subsection;
4. Click "Factory settings".

Note: some versions software router there may be slight differences, but the principle of action when soft reset The parameters are the same for all firmware modifications.

Method 2: Mechanical

To perform a hardware reset, you need to do the following:

1. Find on the back of the device special button"Reset" recessed type;
2. Press the button using any thin pointed instrument, such as a piece of wire;
3. Hold down for ten seconds;
4. The light indication on the front panel of the device should blink;
5. Ready!

Setup procedure

The procedure for entering settings is not very complicated, but different communication service providers require different data entry.

If the provider is Rostelecom?

The following actions must be taken:

If the provider is Beeline?

The setup procedure consists of the following steps:

Setting up Wi-Fi

Setup process wireless network consists of several sequential steps:

Procedure for updating router software

For a new router model “RT N12”, flashing the firmware is not necessary, but if some malfunctions occur, the flashing procedure should effectively eliminate most of the problems. Before updating the firmware, you must download it and save it in the computer's memory.

It is available for free on the official website of the device manufacturer. It is recommended to download the one suitable for specific device firmware The software modification for the device is indicated on its body itself (at the bottom) - “Hardware Version”.

The following actions must be taken:

The procedure for restoring a router after an incorrect update

Sometimes it happens that the owner, due to his carelessness, downloads firmware that does not correspond to the device, or he is not satisfied with the functionality of the standard software, and he intends to install an alternative one. Alternative software from revision n12 d1 can be downloaded from the link: https://ivstar.net/download/RT-N12D1_3.0.0.4_374_4230.trx. Especially for such cases, the router manufacturer has developed the “Firmware Restoration” application, which is used for flashing.

You will need to take the following steps:

1. Using the above instructions for resetting the router, bring its parameters to the default values ​​​​set by the manufacturer;
2. Next, having launched the device interface, enter for local network IP: "192.168.1.10", mask: "255.255.255.0";
3. Then remove the adapter from the 220 V network (cut off the power supply to the device);
4. Press the “Reset” button and at the same time, without releasing the pressed button, reinsert the power adapter into the power outlet;
5. Wait until the “Power” indicator light on the router case blinks, and only then release “Reset” (the blinking of the above light will indicate that the router has entered recovery mode);
6. Open the “Firmware Restoration” application;
7. Click “Browse”;
8. Specify the path to the downloaded software;
9. Wait for the update process to complete;
10. Restart the router.

If the user has problems with the equipment, then one of the possible solutions is the RT-N12 firmware. By installing the latest version, you can improve the performance of your device.

The Asus RT-N12 router has all the necessary functions for organizing high speed connection to the Internet.

Where to download firmware for Asus RT-N12 and which one is needed

There are very many models a large number of and before starting the firmware you need to make sure that it is ASUS RT-N12 and not some other one, otherwise it can cause harm normal operation devices. Each model has its own software.

To determine whether you have an Asus RT-N12 wi-fi router or not, carefully inspect the device and find the sticker. Next, you need to understand which version is already installed on the equipment, this is written in the line F/W ver.

After the user is convinced that this is the model, you need to go to the official portal of the manufacturer asus.ru and find the “Products” tab -> “ network hardware» -> « Wireless routers", where your device is selected from a whole list of others.

Now the user is provided with the appropriate firmware for the Asus RT-N12 router, which needs to be downloaded. The list starts with the most fresh drivers, so no need to scroll down the page, just search Asus driver RT-N12 at the top. Near the downloaded file there is an inscription that will tell you what kind of firmware it is for the Asus router; if it is newer than what is already installed on the device, then this is what is needed.

Before you start flashing the Asus RT-N12 firmware, you need to reduce the risk of failure, for this you need:

1. Connect Asus equipment LAN wire directly to the computer, instead of Wi-Fi
2. Check connection with router
3. Turn off the provider's cable and connection to the Internet.

Asus RT-N12 firmware process

Everything is ready to start flashing the firmware, so go to the device settings via the browser, where address bar The numbers 192.168.1.1 are entered, then the user is taken to a window where the login and password are entered. If the login-password pair has already been changed, then new data is entered; with factory settings, it is enough to enter the standard login: admin, password: admin.

The appearance of the router settings may differ in design, but the items necessary for updating are present in all variations, so the instructions are suitable in any case.

In the menu, select “Administration” -> “Firmware Update”. Here you can select a file that will update the program. This is the file that was downloaded earlier, so we select it.

Some tips that will allow you to reflash the ASUS RT-N12 router:

• If the process has stopped moving, then you should not close the window, you need to wait and the firmware will continue. This may occur due to a communication breakdown;
• in many cases the connection will be broken because the router reboots itself to apply the new firmware;
• The connection can be lost for up to ten minutes; after this period, you can go to the address again and continue to repeat this operation at certain intervals until the connection is restored.

When the Asus RT-N12 firmware is completed, the user is redirected to home page, if this does not happen, then you should do it manually. If the firmware for the router was successful and you were able to update it, you will notice that the number in the corresponding column has changed to another.

Let's analyze this procedure step by step: firmware for Asus 12 ASUS setup RTN12 VP and firmware for WF router in Russian. Native firmware just terribly buggy. 0 for ASUS RTN12 C1 and D1 The first significant difference between ASUS RTN12 D1 and ASUS RTN12 C1. AWRTM firmware for routers B MIPS RTN DWAN, JFFS, CIFS, SSH. A 12 firmware added fresh file. It looks very strange, since by default on Asus, access is from. Firmware RTN12 VP version. Thank you said 146 times. ASUS RTN12 VP firmware is performed to improve the stability of the router. Thank you said 847 times. There are 3 firmwares on the links on the site

Beeline and Rostelecom with 12 firmware Rostelecom Settings ASUS router RT. To download the firmware for ASUS RTN12 VP, you just need to carefully read the page you are currently on. 0 for ASUS RTN12 C1 and D1 Setting up ASUS RTN12 VP and firmware for WF router in Russian. But if I turn it on via router 12, then p. Thank you said 687 times. Let's look at this procedure step by step. A 12 firmware added updated distribution. Official firmware for 12VP and 11P, received from the ASUS support service. Firmware 3. WF of the Asus access point. In addition, using this program you can reflash the ASUS RTN12VP router with alternative firmware to solve problems with speed cutting and a number. to start the firmware process A RT N12 VP B1

FB and then execute the program. Install the firmware from Oleg Enthusiasts, it works best on this model. Alternative firmware from enthusiasts to choose from, see for RTN12. Download ASUS utility RTN12 F R. After the router updates its firmware and reboots, you can start using it. A 12 firmware download. If you want to receive latest version official firmware and instructions for. Setting up the RTN12VP is an extremely easy and simple process, consisting of three steps and taking no more than 30 seconds. I bought this router, version D1, the Internet drops wildly, the speed is also clearly slow, I downloaded it from the Asus website latest firmware. We will consider the ASUS RTN12 firmware in a newer version, but that’s all. Modems produced by Asus are also no exception and are widely used due to their reliability and simplicity.

Alternative firmware for Asus 56, firmware 2014, 10, 12 1. RTN12 VP, firmware. 0 from the Asus website we find ours. Download instructions for the ASUS RTN12 VP router. It looks very strange, since by default on asus devices access is prohibited so as not to allow strangers to get into your router. A 12 firmware is loaded with the latest archive.

In Asus rt n12, firmware and configuration helps increase the speed of the Internet connection. Asus rt n12 is popular model wireless router.

Like any gadget, this router needs regular updating.

Go to the company's product section and find a list of models wireless routers.

1. Go to your router model window on the manufacturer's website. Indicate the OS version that is currently installed on your computer;
2. Next, select the software tab and click on the Global link, as shown in the figure;
3. From the list of new versions, select the appropriate one (in in this case-lx). The download of the archive will begin.

Selecting from a list of new versions using a program on a PC

Notice! All firmware versions come one after another (vp -> c1 -> d1 -> lx). Choose a newer one according to this principle. In the list of firmware on the official website at the top are the newest and current versions Router software.

Before updating, make sure that the router is connected to your computer or laptop using a wire. The over-the-air update may fail.

Be sure to disconnect the Internet provider cable from the router.

Router software update process

In order to start updating the router, you should go to its control panel through a browser. To do this, enter the IP address (192.168.1.1). Then fill in the username and password fields.

View of the router settings menu

Older versions of the router (vp, c1) have an interface in blue color, and newer ones (d1, lx) - in gray-black.

Let's consider the option of flashing the firmware using the control panel for more new version.

In the menu for updating the program, select the archive downloaded in the previous step and click on the “Submit” button.

Home tab The control panel looks like this: