Registry cleaner - CCleaner is very easy to configure, it will not harm your computer in any way.
Optimal CCleaner settings for Windows
Install and run the utility. The first item in the menu in the left column is cleanup, where you can configure browsers. Go to apps and select the browser you use most often. Check the boxes next to:
- Internet cache.
- Download history.
Do not mark the rest of the items, as they will be useful to you. For example, form autocomplete is a very convenient service for users. If you went to any site and filled out the registration or subscription form, then Autocomplete remembers the data.
When you reopen the site, you will already see the completed lines of your data, you just have to confirm them. If this item is ticked, then after cleaning your browser will forget how and where you registered.
The log of visited sites is that memory in the browser where it remembers which sites you have been to. If you clean it, the history will not be saved.
Cookies are responsible for remembering your logins and passwords that you enter on sites, social networks where you once registered. This is suitable for those who do not like to enter their data every time to get to the site or their page.
You can click on the pop-up window in the browser itself - "never remember the password for this site", and do not put a check mark in CCleaner in front of Cookies - do not put files. By this principle, you can configure the cleaning of any browser in the program.
Cleaning the registry from garbage
Do not uncheck the boxes anywhere in this menu. Just click on the bottom left on the button - search for problems. When you uninstall programs from your computer or some kind of malfunction occurs, entries about this remain in the registry, which slow down the computer. Therefore, if CCleaner shows problems in the registry, you need to fix it.
Service
With it, you can remove programs installed on your computer. The service has an autorun item, it shows which applications, programs are loaded along with the operating system when the computer is turned on. It is necessary to monitor this and disable unnecessary startup, as they slow down turning on and off the computer or laptop.
When you install or remove programs, the system creates restore points with which it can be restored. But when a lot of them accumulate, they take up enough memory, which also affects the operation of the computer. In the menu - System Restore in CCleaner, you can manually delete unnecessary points, leaving the last 2-3.
The above CCleaner settings for are aimed at the general user. If you are an experienced computer scientist, you can customize the program more professionally.
CCleaner is a free utility from Piriform that can:
1) (temporary and obsolete files);
2) ;
3) ;
4) uninstall software and remove uninstaller shortcuts;
Where can I download
You can download the latest version of the program from the link to its official website: https://www.piriform.com/ccleaner/download/standard
Installation
Attention! Every time you install a new version of CCleaner, you don't have to manually uninstall the old version. The program is able to make the correct upgrade of the virus automatically.
Run the downloaded ccsetup [version] .exe file:
Please select Russian language.
Click on Next:
Click on Install:
Click on Ready:
Configuring CCleaner
Run the program and enter Settings.
1. Go to the section Additionally... Here we recommend unchecking the box. Only delete files older than 24 hours from Temp folder:
2. If you do not need constant monitoring of the system, you can disable it.
V Settings go to section Tracking... Remove the jackdaws Monitor the system and Enable active monitoring... Then press YES in the window with a question :
Summon Settings You can also right-click on the CCleaner tray icon:
Using CCleaner
Cleaning your computer from unnecessary files
We advise you to check the boxes as in the next two screenshots. The main thing is to clear " Temporary files" in the section "System" and " Temporary files" in all installed browsers:
After selecting items to clear, press Analysis:
The program will analyze the system and the amount of files that can be deleted. After the analysis, you can delete the found files or refuse to delete and, for example, change the file search areas. However, you can also press the button Cleaning so that the program finds and immediately deletes all files that meet the selected criteria:
Click the button Cleaning:
If you do not want the program to warn you about the final deletion of files every time, check the box Do not show this message again. Click the button OK:
After that, all found files will be deleted from the disk:
Cleaning the registry with CCleaner
Go to section Registry and press Search for problems:
When finished, press To correct. The program will offer to save a copy of the changes. Click on Yes and specify the folder where to save the backup for recovery:
If you want to be able to undo the changes, click Yes to save a backup of your changes:
Click the button Fix marked to fix registry errors:
Click on Close:
Removing extensions
Go to section Service.
.Here you can view the installed extensions for all browsers present on the system. To remove or disable an extension, select it in the list and click the corresponding button in the right part of the window.
CCleaner is one of the most popular utilities for optimizing your PC. In this article, we will help you learn how to properly work with this useful software in order to make the most of the opportunities it provides. So, CCleaner - how to use the program, instructions for use:
How do I clean junk files (cached and temporary) from my computer using CCleaner?
To do this, we need to go to the "Cleaning" section, select the desired section (Windows or Applications) there. In the list that appears, you must mark the programs that you want to "clean up" from the accumulated unnecessary files. You can leave the checkboxes where the program suggests. Then click "Cleanup" if you want to clean up immediately, or "Analysis" if you want to preview the scan results.
How do I clean the Windows registry from errors using CCleaner?
In order to clean up the registry, you need to go to the "Registry" section, where you can check the boxes which items in the registry you want to fix. By default, the program offers to fix all keys and we recommend that you do so. The first step is to click the "Troubleshoot" button, after which the application will scan the registry for errors. The results will be displayed. After that, the "Fix" button will become active. Press it - and the program eliminates all found errors.
Watch the video tutorial "How to clean the registry with CCleaner"
How to properly uninstall a program from a computer using CCleaner?
To do this, go to the "Service" section and select the "Remove Programs" item. CCleaner will check the list of installed programs on your computer and display it in the appropriate window. Then you can select the application you do not need and click the "Uninstall" button. CCleaner will not only delete the application itself and the folders and libraries it created, but will also make the appropriate entries in the registry.
How do I edit the startup list of my computer using CCleaner?
To make changes to startup, go to the "Service" section and select the "Startup" tab there. CCleaner will list Windows startup and other programs that have this capability. This list will list all applications that start when the system boots. If you know for sure that you do not need any of them, you can select this application in the list and click the "Turn off" button. You can later enable autoload in the same way.
How to securely erase discs using CCleaner?
Simple deletion of a file using Windows does not actually delete the information, but only overwrites the first byte with the file address. Thus, with the help of special software, it is possible to restore it later. If you have a need to erase a file for sure, we recommend using CCleaner for this. To do this, go to the "Service" section and there select the "Erase Disks" tab. Next, you need to choose which disk you want to erase, and in how many times this should be done. The more hits, the higher the erasure quality. Then you need to press the "Erase" button, and the program will perform the required action.
It just so happens that it is quite difficult to maintain the performance of a computer on its own. This is due to the fact that the system is gradually clogged with unnecessary files, folders, programs, settings in the registry and other information, which slowly but surely will lead to the fact that the computer will slow down. In order to carry out a comprehensive cleaning of the system, the CCleaner program was implemented.
CCleaner is a popular software that aims to comprehensively clean your computer. The program has in its arsenal a lot of functions and capabilities, using which correctly, you can achieve maximum computer performance. That is why we will look at how to use the CCleaner program.
First of all, let's say a few words about the program's interface. The main tabs are located in the left area. Opening one or another tab, the functions and settings of the program (or another set of tabs) will be displayed to the right. The largest third part, located in the right pane of the window, as a rule, allows you to launch a particular function, as well as monitor the progress of the execution.
How to clean the system from temporary files and garbage?
Over time, Windows accumulates a huge amount of garbage, which is left behind by the programs you install. The problem is that garbage remains in the system even after you remove all unnecessary programs.
In the left tab open the tab "Cleaning" ... Slightly to the right, you will see two tabs - "Windows" and "Applications" ... The first tab is responsible for system files and programs, and the second, respectively, for third-party ones.
A list of components with which the program will work will be displayed under the open tab. Please note that not all items are checked in the program. Study all the points carefully and, if necessary, check (or uncheck) the checkboxes. If you do not know what this or that item is responsible for, it is better not to mark it.
So, for example, in the tab "Windows" in the block "Other" is the point "Free space cleaning" , which is recommended to be marked only in extreme cases, because otherwise, the progress of cleaning the program may take many hours.
Before the program can perform the cleaning, the analysis must be run. In the center of the window there is a button "Analysis" which will run a check for junk and temporary files for both system applications and third-party applications.
Please note that in order to analyze the information accumulated in the browser, it is necessary that all web browsers on the computer be closed. If you cannot close the browser at the moment, then it is better to exclude it from the CCleaner list.
When the data analysis is complete, a report on the files found and the amount of space they occupy will be displayed in the center of the program. In order to clear all detected files, click on the button "Cleaning" .
You can also exclude certain files from the list. To do this, select those files that CCleaner should not delete (if there are several files, hold down the Ctrl key), and then click on the "Cleanup" button or right-click on the selected files and select the item "Cleaning" .
As a result, the files that we have selected will remain in the system.
How do I clean the registry?
The registry is an essential component of Windows, which is a database responsible for storing settings and configurations of both the system and third-party applications.
The registry clogs up quickly enough, because By installing and uninstalling programs, the files in the registry remain, thereby over time causing not only a decrease in the speed of the computer, but also the appearance of "brakes".
We have already described in more detail how to clean the registry in the CCleaner program in one of the previous articles on our website.
How do I uninstall programs with CCleaner?
With CCleaner, you can also remove unnecessary programs from your computer. It is noteworthy that you can uninstall not only third-party programs and applications, but also standard ones, of which there are especially many preinstalled in Windows 10.
In order to remove unnecessary programs through CCleaner, go to the tab "Service" "Remove programs" ... A general list of both third-party and standard programs will be displayed on the screen.
Highlight the program you want to remove from your computer, and then click the button "Uninstall" ... Complete the uninstallation process.
How to remove programs from Windows startup?
After installation, many programs really want to get into Windows startup. Startup programs will automatically start every time the computer is started and, accordingly, if there are too many of them, the system will slow down a lot, spending a lot of time launching all applications.
To edit programs included in Windows startup, open the CCleaner tab "Service" and go to subtab.
The screen will display a list of all programs installed on your computer. Some programs have a status "Yes" , about some - "Not" ... In the first case, this means that the program is located at startup, and in the second, it is absent.
If you want to remove a program from startup, select it with one click of the mouse, and then click on the button "Turn off" .
The program is added to startup in the same way. To do this, select the program by clicking the mouse, and then click on the button "Turn on" .
How do I disable browser add-ons?
Add-ons are tiny programs, an overabundance of which can significantly undermine both the speed and stability of the browser and the system as a whole.
CCleaner allows you to disable unnecessary add-ons from all browsers installed on your computer at once. In addition, CCleaner will become an indispensable assistant in the event that the browser refuses to start due to the fault of an incorrectly working add-on.
In order to clear the list of browser add-ons, go to the tab "Service" and then open the sub-tab "Browser add-ons" .
The top center area of the window will display a list of your browsers. Highlight the desired browser to go to its list of installed add-ons. Select the unnecessary add-on by clicking the mouse, and then click on the button "Turn off" ... In the same way, you can activate the work of disabled add-ons by clicking on the button "Turn on" .
How do I remove duplicate files from my computer?
Over time, a huge number of files are typed on the computer that twin brothers may have. CCleaner allows you to scan the system for duplicates and, if found, safely remove.
To do this, go to the program tab "Service" and open the sub-tab Search for duplicates ... In the window that opens, if necessary, configure the filter, for example, by specifying the maximum file size or a specific disk on which scanning will be performed, and then in the lower pane of the window, click the button "Find" .
Select unnecessary files by checking the box next to each take, and then click on the button Delete Selected .
How do I restore the system?
When major changes are made to Windows, rollback checkpoints are created on the system, which allow the system to return to the selected time period.
If you need to perform a system restore, open the tab "System" and go to subtab "System Restore" ... All available rollback points will be displayed on the screen. In order to restore the system, select the point, and then click on the button "Restore" .
How do I erase discs?
Erasing discs is one of the most interesting features of CCleaner, which allows you to erase both the entire disc and only the free space on it.
The fact is that after uninstalling the program (especially in the standard way), traces remain in the system, which allow, if necessary, to easily restore the deleted file, program, etc.
To increase the stability of the operating system, as well as ensure the inability to recover files and programs, go to CCleaner to the tab "Service" and then open the sub-tab "Erasing Discs" .
In the window that opens near the item "Wash" you will have two options to choose from: "Only free space" and "Entire disk (all data will be destroyed)" .
Near point "Way" you will be prompted to select the number of rewrites. In order for the process to complete faster, 1 pass is marked by default.
And finally, below you will be asked to select the disk (s) with which the program will work. To start the erasing process, click on the button "Erase" .
How do I update CCleaner?
The CCleaner program in the free version is not endowed with an automatic update function, and therefore you will have to check for updates and install the new version of the program yourself.
To do this, go to the tab "Upgrade" , and then in the lower right corner by the button "Check for Updates" .
You will be redirected to the developer's site, where you can see if the current version of the program is installed on your computer or if it needs updating. From here, if necessary, you can download an updated version of the program, which you will later need to install on your computer.
CCleaner is a really useful program that can be used skillfully to keep your computer "clean". We hope that with the help of this article you were able to understand the basic functions of this unique program.
Our readers have already familiarized themselves with some of the capabilities of the CCleaner program, when they studied a way to quickly clean up the computer registry. Then we decided not to waste time on a detailed overview of all the features of this wonderful program and limited ourselves to only one of the functions.
However, the functionality and efficiency of CCleaner, as well as the capabilities of the free version, are so great that it would be a big omission not to pay attention to them. Therefore, today we are analyzing how to speed up a computer using CCleaner.
Introduction
In fact, quite objective reasons pushed me to write this article. The computer in the office, a real workhorse, began to think for a long time and freeze. It is not surprising, because the hot summer is just in full swing, and the increased volume of work and "mountains" of accumulated garbage on the disk affect the speed of work in a far from the best way.
This is how the site of the Russian community of the CCleaner program looks like. Please note that, in addition to the regular version, we are offered to download the Portable version, which does not require installation.
And this is the official site from the developers of the British company Piriform. The usual free version is quite enough for us.
The professional version costs $ 24 and differs from free extended technical support and some additional functions that are also performed by standard Windows programs.
We launch our file, the installation program opens, in which we indicate the language in the upper right corner, and click on the blue button Install.
Uncheck the box and click on the button Run.
The main program window opens. At the top of the program, brief information about our device is immediately displayed. As you can see, our work computer is running Windows 10 Pro, 64 bit version and a few lines about hardware.
Important! Take your time to run a system cleanup. Go to the Applications tab and uncheck Cookies if you don't want to re-enter passwords on multiple sites. I don't want to, so I'm taking pictures. Also, the history of visited sites is important to me for work, so for now we will not delete it either.
Push the button Cleaning, we agree with the deletion of files and see how the program frees up 1.5GB of temporary files with a graceful movement of the progress bar, which significantly slows down the system!
Registry cleaning
We mentioned more about cleaning the registry in the corresponding article. The main thing is, do not forget to make backups and clean the registry no more than once every couple of months.
Click on the button Search for problems, after analysis we study the list, click Fix Selected.
In the next window, we agree with the creation and saving of backups, indicate the location where to save the backup. Next, boldly click on the button To correct or Fix marked.
If, after cleaning the registry, you have lost the necessary shortcuts, programs stopped working and any errors in the work were found, you can always reverse the changes made.
