Modern world offers the user great amount gadgets for both work and play. Almost every such device has the ability to access the Internet. As a rule, this is a wireless module wifi connections, which connects to a device called a router. Much depends on such a device. This is the quality of communication, performance, speed and much more.
At the word router, many people remember the most famous brands such as D-Link, TP-Link, Asus. Due to their popularity, these manufacturers sometimes unknown reasons raise the price of their goods very high. But what about less popular and cheaper analogues?
AT this moment market digital equipment offers users huge selection routers to work on the Internet. Some models have a lower cost compared to famous brands, have richer functionality.
No exception is the line of routers from Netgear, which always offers its customers high-quality and productive network hardware. Most popular model this manufacturer is netgear n300. This is due to the pricing of this model and stable operation.
This article will show, using the n300 model as an example, that setting up a netgear router is not difficult and does not differ from others in more famous models routers.
The Netgear n300 router (JNR3210-100RUS) is modern device running at 1Gb. The main advantages of such a device can be attributed to the ability to connect various USB modems (4G,3G), support wifi technology 802.11n, which provides speeds up to 300 Mb / s, the ability to connect a printer via USB or a USB flash drive to organize a home file server.
Considering the devices from the hardware side, we can say that the router is equipped with very impressive details. The device has on board the microprocessor Realtek 8198, which operates at a frequency of 620 MHz. Volume random access memory is 128 MB.
Support is also a plus. digital television IPTV. The only thing that will not work is to register a separate Vlan for streaming, but this can be compensated by dedicating a separate device port for this purpose.
The n300 router can work as a wifi repeater. But this is far from the main advantage of this device. The device has RP-SMA type antennas. This means that, if desired, you can replace standard antennas 2dBi for more powerful ones. Thus, increasing the coverage area of the wireless network in an apartment or house.
The device supports the technology WPS connections to wifi.
For owners of modern TVs, it will be an undoubted advantage of acquiring this device for setting up a DLNA server on it.
The only downside is that the router has a meager list of supported USB modems. More details about it can be found in the device manual or on the manufacturer's website.
Some users report that the router sometimes refuses to work with external drives a certain brand. There were also complaints about the very bright power indicator.
If we talk briefly about the Netgear JNR3210 router, then this stable work networks, confident level wifi signal and low temperature at the maximum load of the device.
Netgear N300 Router Features
To configure the router, you need to go to its web interface. To do this, open any browser and in address bar we write its IP or the name of the web script routerlogin.net (default IP 192.168.1.1). At the first step, the user will be prompted to enter a username and password. If the device has not been used before, then the login will be Admin, and password password. If the data is entered correctly, the user will be opened start page as shown in the picture below: 
Configuring Dynamic IP
This add-on is relevant when you need to connect an Internet provider that is distributed via DHCP.
After you managed to enter the web interface, you must select the "Internet" tab. In the window that appears, the user needs to check the box next to the item "Do I need to enter a username and password when connecting." If the provider provides for binding the MAC address of the device and the Internet used to work on the computer, then you need to check the box next to the item that activates the use of the computer's mac address. Next, click the "Apply" button and reboot the device. 
PPPoE
Many providers work with this type of connection. To configure the Netgear router, you need to go to the “Internet” section in the setup interface and specify what is required in the “Do I need to enter a username and password when connecting” field.
Next, you need to select the type PPPoE connections, then enter the login and password provided by the provider in the highlighted lines. Select "Always On" in the connection mode section. Be sure to put a marker in front of the line "Obtain an IP address automatically." 
A number of providers require binding by MAC address. In this case, in the "MAC address of the router" field, check the box next to "Use the MAC of the computer."
After saving all the settings and rebooting the router, you can connect wifi connection on any device.
L2TP
If the provider uses the L2TP connection type, then in the interface of the Netgear router, you need to go to the "Internet" item, and opposite the request for the need to specify a login and password, put a "Yes" marker. Select the L2TP connection type and enter your individual login and password in the lines below.
For users whose provider requires binding by MAC address, put a marker in front of the line "Use computer address".
After all the settings have been made, click Apply. 
To set up a Wi-Fi network, you need to go to the "Wi-Fi network" menu
Come up with a name for the network and write it in the "Name (SSID)" line. Then fill following lines: channel - auto, mode - up to 300 Mbps.
Specify "WPA2-PSK" security settings, write down your personal security key below. You need to come up with it yourself, it can consist of letters and numbers and must be at least 8 characters long.
Then click save/apply and reboot your device. A Wi-Fi network with your name will appear in the row available for you to connect. 
If the provider does not have a VlanID, it will be enough to specify the port in which the set-top box is installed in the router
To make this setting, you need to go to the Advanced mode section, select "Settings", "Internet port settings" in turn. Make sure that there is no marker in front of the "Disable IGMP proxy" item.
Next, in the "Redirect IPTV stream for set-top box" item, put a marker on the port to which the equipment is connected. Then save and reboot your router. 
In contact with
This article will focus on setting up the N150, N300 and WNR1000 models. Each device has a similar system of settings, and having dealt with one of the routers, the user can easily understand the menu of other models. The presented routers are one of the most common routers in the line from the manufacturer at the moment.
Like any other routers, they have factory settings that can be changed during installation by specialists from the provider. The article also provides instructions for those who have just purchased a router and plan to install them themselves. Adjustment of these models provides work with any provider. It will be about the configuration under operating system Windows. We will describe how the Netgear router is configured below.
SettingNetgear N 150
This little router has one WAN and two LAN port. This device is designed for home use and for the so-called SOHO solutions. Can be used as an Access Point. Like any device, you need to take it out of the box, connect it to the network, insert the cable into the WAN port, connect the router to the computer using a LAN cable (or WiFi) and get to work.
How to connect a Netgear router
Login to Netgear 150 can be done through LAN cable or through wifi protocol. Connection via LAN port does not require additional settings or data. To connect via Wi-Fi, the default address is 192.168.1.1. This value is relevant for new devices and all routers that have not been reconfigured during network connection by other specialists. Typically, most workers various internet providers change these values in order to increase the security of the modem.
How to set up a Netgear N150 router if there is no cable at hand and the address has been changed? To solve this problem, you need to reset the router settings by pressing special button reset. It is located on the back end near the power button. Upon successful connection to the router, an authorization window should appear. The default username is "admin" and the password is "password". If it turns out that these data are incorrect, and the username data is unknown, you should use the reset button.
Further, setting up the Netgear N150 router involves setting up the receipt of IP addresses. AT Windows system open the "Network and Sharing Center" tab public access" and go to the "Change adapter settings" section. Choose suitable connection, click on it right click and go to "Properties". In the window that opens, find the item "Internet Protocol version 4 (TCP / IPv4)" and double-click on it. Now in the tab that opens, you need to select the items “Obtain an IP address automatically” and “Obtain DNS server address automatically” or manually enter the values of the static IP that the provider will issue. This criterion directly depends on the method of connection to the provider.
Tip: if you got a new device and the menu offers to carry out automatic settings Netgear router, then you should refuse and go to the self-configuration of the modem.
How to set up wifinetgear routerN150
An Internet Service Provider can operate through various protocols. If he provides PPTP connection, then you have to execute following instructions. In the "Basic settings" column, you must select an Internet service provider. In the drop-down menu, select the PPTP item. The contract with the provider must contain the username and password for it. If such data is not available, then you will have to contact technical support provider and get information. If during the setup you follow all the instructions, but the network still does not work, this may be a reason to find out from the provider the missing configuration parameters, such as the IP address or DNS servers.
Setting up an L2TP connection may be required for Beeline subscribers. The principle of setting up this type of connection is very similar to PPTP, with the exception of selecting the "always on" menu in the "connection mode" field.
Netgear N150 Router Main Settings Menu
The PPPoE protocol is configured for providers such as Rostelecom. At the moment it is one of the most common connection protocols. In addition to this, it is also one of the most simple modes jobs that require only a username and password. Additional settings not required for this mode. This type connection is implemented as follows:
- in the “new settings” tab, you need to find the field “is it required to enter connection information when connecting to the Internet” and select “yes”;
- The username and password must also be specified in the contract. Otherwise, this data can be obtained from technical support;
- static and dynamic IP address settings proceed in standard mode.
After setting these parameters, the router is ready for use.
Configuring a Netgear Router linked to MAC address
MAC address is serial number a device that allows you to recognize a user on the network by the physical address of the router. Each device has such an identifier and some providers set up work with binding to the MAC address. In such cases, you need to go to the router settings, and in the "general" section, select the field with the MAC configuration. There you need to enter the number that the provider will provide, as a rule, this data is indicated in the contract. In the absence of this data, you should contact technical support and make a request to provide this information.
After successfully connecting to the network, you need to configure wi-fi on the router. Netgear routers that are configured in the "wireless settings" section require the "name (SSID)" fields to be filled in (the name of the point wi-fi connections), select the WPA2 PSK AES security protocol. After activating the last item, an additional field for the password will appear. Enter a password in this field. The password must be at least 8 characters long. Capitals and lower case, as well as numbers and allowed characters.
How to set up a Netgear routerN300
This is a router with throughput in 1 gigabit. Its main advantage is to support 3G/4G and LTE modem. Installed here USB port, wi-fi up to 300 megabits, file and print server. A fairly strong chip and 128 MB of RAM.
The configuration of this router proceeds in the standard mode, and differs little from the configuration of the Netgear N150 WRN612v2 router. Same IP address - 192.168.1.1, same reset. The only difference between the Netgear N300 router is the choice of security protocol. Here you need to select the WPA2 PSK encryption options.
As additional function, this router has a setting. So far, this router can only send a multicast stream to a specific port. If it is necessary to use VLAN ID for IPTV, then the router will not be able to do this. This router can only work with the port to which the set-top box is connected. In the configuration settings, make sure that the "disable IGMP proxy" function is not enabled.
How to set up a Netgear WNR1000 router
This device is set up in standard mode. The interface of this model is in many respects similar to the N300 model, the entire configuration proceeds in the same mode. Here you can find the function to change the factory password, which is used to improve the security of the device. Setting up the Netgear WNR1000 router requires the following security settings: WPA2 PSK AES. Then you need to enable SSID broadcast, enter a name, select a channel in the drop-down menu (44) and mode up to 866 megabits. All other configuration settings use the default values described above.
A few words in conclusion
So we figured out how the Netgear router is configured. In general, all configuration systems on Netgear devices have overall structure. Having dealt with one, the logic of the work of all the others becomes clear. The Netgear JWNR2000 or Netgear R6200 setup works the same way. You just need to be patient, and you will certainly learn how to tune home network on one's own!
Fast internet to you!
New generation routers are becoming more complex in design, while becoming easier to use and configure, so an article on how to set up a NETGEAR router using the NETGEAR N300 as an example will be useful to many. Today, even an ordinary user is able to create a wired or radio connection to the Internet, having in his hands step by step algorithm actions.
Device preparation
To start connecting the n300 router to the Internet, you need to perform a number of preliminary operations:
- Connect the power supply to the rear panel and turn on the device;
- Plug in the WAN cable and connect the PC with a second patch cable (plugged into one of the five dedicated ports);
- Press the power button, which this model has moved to the front panel.
After these manipulations, the indicator lights should indicate that the device is turned on in one of the ports and the network cord is connected to the router, which means: you can proceed to the software setup.
It starts with setting automatic IP acquisition and DNS addresses router. To do this, we need to get into the settings panel of the wired and wireless network adapter. The algorithm for Windows 7 and 8 is as follows:
- Right click on the icon network connection in the right corner of the monitor;
- Open the Control Center and in the side menu select the settings for the adapter;
- Right click - properties of the current cable connection;
- In the window that opens, look for the line of settings for the fourth version of the Internet protocol, open the properties (by clicking on the button a little lower);
- The settings selectors for both items in the new window must be set to auto fetch;
- We save the settings, close the open windows.
Modem setup
To get into the area of the web configurator of the router and connect the Internet, you need to enter the following ip in the address bar of any browser - 192.168.1.1
To enter the settings, open the browser, and enter the address: HTTP://192.168.1.1
Then, in the form that appears, enter the login “admin” and the password “password”. We click on Ok and we get into the main settings menu. A feature of the Netgear n300 model is that the instructions for setting up the connection will differ for different Internet providers. And the first difference is the presence of a dynamic or static IP.
If your ISP (and most of them) works with dynamic ip addresses(that is, you are assigned new address for each new session), then the setting should go as follows:
- In the menu on the left, select the Internet item;
- We refuse to enter information when connecting to the Internet;
- We do not specify anything in the account name and domain name;
- Specify automatic receipt ip-addresses and DNS servers;
- In the event that the provider does not work with binding to MAC addresses, leave this settings item with the default value and set the “address of this PC” otherwise;
- Save the changes and check if the connection works.
If your provider uses a connection using the PPPoE protocol, for example, as with Rostelecom or DOM.RU, the setting is as follows:
- Open the Internet menu item;
- In the first selector, set the value to "Yes";
- Next, select the connection type "PPPoE";
- Below we indicate the authorization data that the provider provided us in the contract;
- The network connection mode must be permanent, therefore "Always on";
- As in the previous case, we choose automatic installation addresses;
- If your provider is Dom.ru (it uses MAC address binding), set the selector to use your computer address in the last settings item;
- We save the results, open any site for verification.
If your provider uses an L2TP connection, as is the case if your operator is Beeline, the instruction above will change to the following:
- Instead of PPoE, select the connection type for your router - L2TP;
- Manually enter the address of the Internet provider's server (for Beeline, this is tp.internet.beeline.ru).
For the rest, we use the same settings (without reference to the MAC address of your device). We check the automatic receipt of the IP and save the changes. After that, the wired network of the Netgear n300 router should work.
WiFi setup
In order to connect wifi network on the n300 model, do the following:
- Open the item from the menu on the left "Wi-Fi network";
- A new window opens: in the line with the name, set the name for your wireless connection;
- Channel selection can be left automatic, or you can set eigenvalue if there are many other wireless networks around;
- The connection mode must pass up to 300 Mbps;
- In the security settings, select the last selector (the most advanced type of encryption);
- In the area for specifying the password, enter our key, which should contain numbers and letters (preferably in a different case);
- We apply the changes and try to enter any website via wifi.
How to update the firmware?
So that in the future the router can be connected to the Internet without problems, you need to install latest version Software, that is, reflash the device. This is done in several stages:
- The first step is to enter the official website of the manufacturer and download the latest firmware version, for example jwnr2000v2;
- We disconnect the Internet cable of the device, but leave the one that connects it to the computer;
- We enter the device settings menu, click on the firmware number in the page header;
- Select the update file on the computer by clicking on the Browse button;
- Download, wait until the router reboots and we can go back to the settings;
- Download the configuration file from the official site or from the disk;
- We select the item "Manage settings" in the menu of the router, then - "Restore settings";
- Download from computer required file and wait for it to install.
After that, try to go to the settings page again, and then insert the WAN cable (Internet) and enter any site. If everything works, congratulations! You managed to connect the Internet to the Netgear router yourself.
If something went wrong, you can return the settings to the factory settings. To do this, there is a Reset button on the back of the device, holding which you need to wait 10-15 seconds. After we release and wait until the n300 starts up. After that, you can try again to set up the Internet and update the firmware.
Found a typo? Select the text and press Ctrl + Enter
hero this review became the Netgear N300 router. It was he who was the leader in sales in 2015. In terms of the number of models sold, this router caught up with such famous brands as Asus, TP-Link, D-Link. For the domestic buyer, the main criteria were low cost and functionality. In this matter, there is practically no equal to the Netgear router. The N300 model will be able to provide the user with a home wireless network that works flawlessly. So let's take a look at the features. this device and ways of setting.
Router selection
When it becomes topical issue about choosing a router, the user pays attention to some criteria. First of all, if we are not talking about offices, then most often preference is given to cheap devices. This is exactly what the Netgear N300 is. Two years ago, the router went on sale at a price of about 1,100 rubles. It allows you to create a home network that provides access to the Internet. The device is designed for both wired connection and wireless. With the help of the latter type, you can work with any gadgets equipped with WiFi support. In addition to the main function, you can work with the router via USB. This model The router is compatible with 3G/4G modems, printers, drives, or an external drive.
Indisputable advantage this device is the encryption of the wireless network channel. Also in the router menu, you can set passwords that will protect the connection from hacker attacks. The device is equipped intelligent system. She can block everything. suspicious attempts connections.
Packing and scope of delivery
Buyers, having come to the point of sale, will see the router in the packing box. It is made from thick cardboard. Top available glossy finish. Two colors were chosen for the color design: white (main) and blue (finishing). On the front panel The name of the company is written in capital letters. On the opposite side are presented brief characteristics router. Of course, there was also a photo of the Netgear N300 device itself. Instructions that will help you properly configure the router are inside the box. Also included in the package were items such as a patch cord (cable for connecting to a PC), USB extension cable, a special stand for convenient operation and a power supply.
According to most owners, nice bonus became a set of accessories. Special attention attracted an extension cord with which you can connect any device that has a USB connector in the form of a large platform.
Design features
Now let's look at what the Netgear N300 router looks like? External design practically no different from devices of this type. Its dimensions are 17.3 × 11.7 × 3.8 cm. The standard rectangular shape of the case is taken as a basis. The bottom panel in front has a small gap and a ledge. It is designed to be attached to a special stand, which is provided by the manufacturer in the kit. Also on the front side are led light bulbs. These indicators inform the user about the enabled operating modes of the router.
The top cover is non-functional, only the company logo is on it. Its surface is glossy. Due to the fact that the device is installed on the surface using a stand, there are no usual legs on the bottom. Connectors and function buttons located on the back of the router.
Buyers in their reviews drew attention to the fact that the manufacturer provided two color solutions. Both options are classic: black and white.
Leader positions: advantages and disadvantages
Netgear N300 is a device that can satisfy all requirements. It is installed not only in homes, but also in small offices. It is important to pay attention to what is included in the package special cable which can be connected to any device standard type. These are not only computers, laptops, but also modern TVs. If you need to connect several outlets, an additional module is purchased separately at any outlet. This method is suitable for those who do not have the opportunity to run a cable around the room.
It was also not without drawbacks. most main problem is the lack of a network hub. This item is used for wired connections. Users are not yet ready to completely abandon past generation technologies, but the manufacturer guarantees that they will be completely replaced in the near future. wireless interfaces. For example, consider the characteristics of a similar device that transmits a signal over a wired connection at a speed of 100 Mb / s, and via Wi-Fi - at 300 Mb / s.
router potential. A few words about performance
AT based on Netgear The N300 is based on the Realtek RTL8196B processor. During operation of the device, it operates at a frequency of 330 MHz. In order for the router to function, you need not only a processor, but also a communicator. The N300 uses a five-port model. The router operates in 2T2R mode with the 802.11n standard, while using the 2.4 GHz frequency.
The signal is transmitted using antennas. They are located directly on the board. The functionality of the device is provided by 32 MB of RAM. And the amount of built-in is 4 MB.
Configuring the Netgear N300 Router: Entering the Menu for the First Time
A little later, it will be possible to familiarize yourself in detail with how to quickly configure a router of this model, but for now, just consider the main points that all users will encounter, without exception. The first thing all buyers should know is to create local network It will be quite easy even for those who do not have special knowledge. This moment can also be attributed to the list of advantages of the N300 router.
So, in order to enter the settings menu, you must enter in the address bar of the Internet browser standard set digits (IP) - 192.168.1.1. As a rule, it is used for all routers. If the address is entered without error, then a window will appear on the screen asking the user to enter the system. To do this, you only need to write a username and password in special fields - by default this is the word admin. After that, the settings for the wireless network access point will appear on the screen.
For those who absolutely do not understand anything about routers and their principle of operation, it is proposed to use the tips of the interactive wizard. But if you study user reviews, then this method will drag on for a long time, since the program is designed to teach the user all the knowledge of administration and study the full functionality of the device. But in fact, to create an access point, it is enough to configure only the “torrent” client and wireless connection(wi-fi).
Preparing for installation
What do I need to use the Internet through Netgear N300? Configuration is carried out only after certain actions have been taken. But what, you can find out by reading further. For convenience, we will make a list of them.
How to set up a Netgear N300 router?
As mentioned above, in order to enter the menu, you need to enter the IP of the router in the browser line. Then write your username and password in the pop-up window. A menu will open on the screen. It is important to remember that the connection settings may differ depending on the Internet Service Provider. The first thing you need to know is the IP type. It can be static or dynamic. Consider the options for settings, taking into account individual characteristics.
- Enter the menu item "Internet".
- Refuse to enter information manually.
- string account leave empty.
- Activate automatic acquisition of IP address and DNS servers.
- Specify the MAC address if the provider works with binding. If not, then leave the default value.
- Save settings.
- Reboot the device.
PPPoE protocol:
- Enter the item "Internet".
- Select "Yes" in the first section.
- Activate connection type. In this case, PPPoE.
- Enter authorization data. As a rule, they are indicated by the provider when concluding a contract for the provision of services.
- In the "Connection mode" line, select "always on".
- Put a tick on the definition of addresses in automatic mode.
- Working with MAC addresses is determined by the provider's settings. User actions are the same as in the first case.
- Save the entered information and reboot the device.
L2TP connection. The settings scheme is identical, with the exception of two points:
- In the "Connection Type" section, select L2TP.
- Enter the server address manually.
Firmware update
By studying the reviews, you can find out that the most frequently asked question is: “How to change the firmware of the router?” Basically, users become interested in this if the device starts to malfunction. You can also observe a significant decrease in the speed of the wireless network created thanks to the Netgear N300 router. The latest firmware usually fixes this problem. What steps are required to update the system?
- Download the latest firmware from the manufacturer's official website.
- Disconnect the cable through which the Internet is supplied to the router.
- Enter the device menu.
- In the page header, find information about the current firmware and click the "Browse" button.
- Select a file on your PC to install and download.
- Wait for the router to reboot.
After carrying out these manipulations, the user can only check the performance of the device.
Netgear routers are still rare in the post-Soviet expanses, but they managed to establish themselves as reliable devices. Most of the routers from this manufacturer that are on our market belong to the budget and mid-budget classes. One of the most popular is the N300 series routers - the configuration of these devices will be discussed further.
To begin with, it is worth clarifying important point– index N300 is not a model number or designation model range. This index points to top speed built into the router wifi adapter 802.11n standard. Accordingly, there are more than a dozen gadgets with this index. The interfaces of these devices almost do not differ from each other, so the example below can be successfully used to set up all possible variations of the model.
Before starting the configuration, the router must be properly prepared. This stage includes the following actions:
After these manipulations, we proceed to configuring the Netgear N300.
Configuring N300 Family Routers
To open the settings interface, launch any modern internet browser, enter the address 192.168.1.1 and navigate to it. If the address you entered doesn't work, try routerlogin.com or routerlogin.net . The login combination will be a combination of admin as a login and password as a password. Exact information for your model can be found on reverse side corps. 
Will appear before you main page router web interface - you can start configuring.
Internet setup
Routers of this model range support the entire range of connections - from PPPoE to PPTP. We will show you the settings for each of the options. Settings are located in paragraphs "Settings" — "Basic settings".
On the the latest options firmware, known as NetGear genie, these options are located in the section "Extra. settings", tabs "Settings" — "Internet Setup".
Location and name desired options identical on both firmwares.
Connection by PPPoE protocol NetGear N300 is configured like this:
PPPoE connection is configured.
The connection using the specified protocol is a VPN connection, so the procedure is slightly different from PPPoE.
Note! Some older versions of NetGear N300 do not support L2TP connection, firmware update may be required!
PPTP, the second VPN connection option, is configured as follows:
Dynamic IP
In the CIS countries, the type of connection to a dynamic address is gaining popularity. On Netgear N300 routers, it is configured as follows:
Static IP
The procedure for configuring a router for a static IP connection is almost the same as for dynamic address.
As you can see, setting up both a static and a dynamic address is incredibly easy.
WiFi setup
For full-fledged work wireless connection on the router in question, you need to make a number of settings. Required parameters located in "Installation" — "Wireless Settings".
On the Netgear genie firmware, the options are located at "Extra. settings" — "Setting" — « WiFi setup networks".
To configure a wireless connection, do the following:
If all the settings are entered correctly, a Wi-Fi connection with the previously selected name will appear.
WPS
Netgear N300 routers support the option Wi-Fi Protected Setup, WPS for short, which allows you to connect to a wireless network by pressing a special button on the router. More details You will find about this function and its settings in the corresponding material. 
That concludes our configuration guide. routers N300 is coming to an end. As you can see, the procedure is very simple and does not require any specific skills from the end user.
