Why is wifi not blue but gray. Wi Fi icon with exclamation mark

After purchasing their first Android device, the newly minted user will immediately try to access the Internet using their device. But - it was not there - many have problems with the correct choice of Wi-Fi settings, and they cannot immediately do this. In this article, I will explain the whole process of setting up Wi-Fi on Android in as much detail as possible.

Suppose you already have an active Wi-Fi network that you organized at home (for this you need a special device - a router) and you plan to connect a device running Android 4.0 and higher to this wireless network. The whole process is scheduled in as much detail as possible, every step, even the most insignificant, will be explained to the smallest detail.

• So, first you need to turn on the Wi-Fi signal receiver on your device. This is done in the standard system menu: "Menu" -> "Settings" -> "Wireless networks" -> "Wi-Fi". Also, Wi-Fi can be enabled using the standard widget, if you placed it on the desktop before.

• Immediately after turning on Wi-Fi in the system settings, you will see a list of networks available for connection on your screen. Choose any. If, when setting up the router, you created a secure network, then after selecting it, the Android system will prompt you to enter the password in a special window. I must say that more often than not, with standard Wi-Fi network parameters, further steps are simply not required! But if you have any problems - move on.
• Then you need to carry out the most interesting and, perhaps, difficult thing - setting up a Wi-Fi connection. To access the network parameters, you need to hold its name for a few seconds, and then select the "Change settings" item

• Android will then show you the Wi-Fi setup panel itself. To manually set parameters such as IP address, gateway and addresses of DNS servers, you need to check the box "Advanced"

• Enter in the fields indicated above exactly the data that your internet service provider provided you with. If the network administrator is not you, then it is advisable to contact an experienced specialist who will help you correctly configure the router so that it "distributes" the Internet to all connected devices. Also note that Android has a function to automatically detect all network parameters - DHCP. It is better for an inexperienced user to use it, and in case of any problems, already look for a solution in the advanced settings

• After all the manipulations, you can make a short press on the line with the name of the network to view the settings that you have set. Also, in the window that appears, other network parameters are available - bandwidth and signal strength indicator.
• By the way, be sure to pay attention to the Wi-Fi connection icon in the system status bar. If everything is configured correctly, then it will not glow gray, but blue. This is very important, otherwise you will not be able to access the Internet from your device.

That's all, actually. In fact, the process of setting up Wi-Fi on Android is very simple and requires only a little concentration and perseverance. Setting Wi-Fi settings on an Android phone is no different from the process described above for tablets. Good luck to you!

If your smartphone runs on Android 5.0 Lollipop and you connect to the Internet via Wi-Fi, you may encounter a problem with the exclamation mark displayed next to the familiar Wi-Fi icon. What does it mean? How to solve the problem and should it be done? To begin with, the "!" suggests that it would be nice for you to learn more about the wireless network that you decide to use - the caution is associated with it. There are probably many solutions to this problem, but so far we have found the only way that really works.

So the problem is with the wireless network. To solve this problem, we suggest setting a static IP address for this specific Wi-Fi connection. This means that you need to know the available LAN address, gateway address and DNS addresses (DNS1 and DNS2) for the network. As the latter, you can use the default Google DNS addresses 8.8.8.8 and 8.8.4.4. We are not claiming that this is the best solution, but it works.

Procedure:

• Go to " Settings"on your Android device, find the Wi-Fi subsection.

• Find the network to which you are currently connected, press and hold its name, then select from the options offered " Change network».

• At the bottom of the screen, select " Show advanced features"then select" IP parameters"and further" Static".

• Enter the required network information in the fields provided and click " Save". Once you've done that, restart your device. When the device restarts, take a look at the notification bar and make sure you were able to connect to the same network without showing an exclamation mark.

It is possible that you will have to do these steps several times - for each of the wireless networks that you use. But usually updating the operating system to Android Marshm fixes this problem once and for all. Until then, a simple static IP address will keep your device safe. " ! ".

There is such a problem on Android devices, when after connecting to a wireless network, the Wi-Fi icon is gray, not blue, and the Internet does not work in Google Play and other programs. Sites usually open, but there are also cases when there is a connection, and the Internet does not work at all, even in a browser. Moreover, on Android, not everyone immediately notices this gray Wi-Fi network icon, most likely everyone is faced with a problem when simply I can't access the Google Play Store, the error "No connection" or "Check the connection and try again" appears.

And in the browser, when trying to open a site, the error "Clock is behind" (NET :: ERR_CERT_DATE_INVALID) may appear.

As for the Wi-Fi connection icon itself, on Android devices without any branded skins, it really can be gray instead of blue. It looks something like this:

But basically, the wireless network connection icon does not change. Even when such a problem appears. Checked on Lenovo, and Meizu M2 Note. There, in Google Play, YouTube, etc., it was not possible to enter, but the Wi-Fi connection icon itself did not change in any way. He is always gray there 🙂

Gray wifi icon on Android and Google Play not working. How to fix?

I myself have already encountered this problem several times, and have seen a lot of information on the Internet on this topic. So now we will consider the most popular reasons and solutions due to which such problems with Wi-Fi on Android may appear.

First of all, I advise you to try method number 6! As it turned out, installing Dr.Web anti-virus immediately solves the problem with the gray Wi-Fi icon.

1 Time. Date. Timezone. These parameters should be checked first. If the date or time is incorrectly configured on your phone or tablet, then Wi-Fi will be grayed out and Play Merket will not work. This is checked, we change the date on the phone, and the Market cannot access the Internet.

Therefore, go to the settings of your device, to the tab where the time is configured, and check if the settings are correct there. You can check the box next to the automatic date and time setting, or, on the contrary, uncheck it and set everything manually. Also, be sure to check your time zone settings.

If you had the wrong parameters there, then after setting everything should work.

2 Freedom. If you are familiar with an application such as Freedom, or LuckyPatcher, you have it installed, or you installed and uninstalled it, then you need to open Freedom (if necessary, reinstall it), wait a few minutes, and press the button Stop.

It doesn't matter what version of iPhone you have. It could be the old 4S or the brand new 6S Plus. Quite often, the owners of Apple smartphones visit service centers with a request to restore their Wi-Fi functionality. Everyone has different problems. Someone's phone finds networks nearby, but cannot connect to them, while others have an inactive gray icon. What if Wi-Fi doesn't work on iPhone? Is it possible to overcome this malfunction on your own? Or is there not a single chance and should you go to the master?

What to do if WiFi is not working on iPhone?

As we have already found out, Wi-Fi inoperability problems are different. Accordingly, the methods of their solution are also different. In general, any malfunction can be eliminated on your own - the Internet is full of instructions for repairing and disassembling smartphones, but is it worth it to crawl under the body of an iron friend? Good question, huh? There is always a chance to harm even more, and not to eliminate the root of the problem.

First, let's try to understand why Wi-Fi can become "Gray". Offhand, you can name the following options:

The iPhone has recently been dropped and, as a result, mechanical damage could be received that is invisible on the entire body of the smartphone. They can easily become the root of the problem;

A short circuit has occurred;

Moisture got inside and the chip is out of order;

Failure in the operating system.

How to "cure" Wi-Fi yourself?

As you have already noticed, an ordinary person on his own without special knowledge can only influence the operating system. That is, if it is a hardware failure, you can fix the problem and restore your Wi-Fi to work.

Let's say more, it is unlikely that it will be possible to independently establish what kind of “disease” struck your gadget, if it is not a glitch in the OS. Yes, of course, if before that he fell into the water or on the asphalt, you can guess what led to this problem. But it is better not to guess, but to consult a specialist.
As for the fourth option, you can try to solve the problem. It is enough to make an ordinary reset of all settings, that is, a rollback to the standard.

How to do it?

The procedure is extremely simple and will take you no more than five to seven minutes. Well, let's get started (make a backup):

1. Find the icon labeled “Settings” and tap on it;

2. A menu opens where you need to select the "Basic" sub-item;

3. At the very bottom there is an inscription “Reset”, press it once;

4. It remains to choose what exactly you want to restore. Since our failure is software, we will have to reset all settings - select the appropriate item;

5. We agree that all user settings will be lost. To do this, click on the “Reset all settings” button again.

Actually, this is all that is required of you. Now wait for the smartphone to reboot - make the basic settings, if necessary, synchronize. Well, then try to check if Wi-Fi is working on your iPhone. If this does not help, there is only one way out: contact a specialist in the service center for diagnostics and further troubleshooting.

If you are having problems connecting to a Wi-Fi network (for example, authentication or connection stability), try the solutions below. A problem is indicated by the exclamation mark next to the Wi-Fi icon on your Pixel or Nexus device.

After each step, try to reconnect to the network and open any website on the device.

Step 1. Check the settings and reboot the device.

Step 2. Determine the source of the problem.

• Device
  Try connecting to the Wi-Fi network from another device, such as a friend's laptop or phone. If a connection is established, the problem is likely with your device.
• Net
  Try connecting your device to a different Wi-Fi network, such as at a coffee shop or at a friend's house. If the connection is established, the problem is most likely on your network.
• Internet
  Is the device connecting to the network but cannot access the Internet? The problem is likely with your internet connection.

Step 3. Fix the problem.

Solve device problems

Solve network or internet connection problems

Reboot your Wi-Fi router or modem

If you have access to your router or modem, turn it off and on again. Here's how to do it:

1. Unplug the power cord of your router or modem from the outlet for 15 seconds.
2. Reconnect the power cord to the outlet.
3. Make sure all cords and cables are securely fastened on both sides.
4. Wait a few minutes for the lights on your modem or router to work normally.

If the lights do not flash as instructed, the problem might be with your modem, router, or Internet connection.

In this case, contact your network administrator or Internet service provider. The problem might be due to a power outage or reset of the Internet connection.

Sign in to connect to the public network

Typically, to work with a public Wi-Fi network (for example, in a cafe or airport), you need to sign in on the authentication page. Otherwise, the connection will not be established.

If this page appears when you connect to a network, please sign in or accept the terms of use.

If the authentication page does not open, follow these steps:

• Check to see if the login notification appears.
• Try opening a new web page in a new window.

If that doesn't work, try connecting to the network again. Here's how to do it.