Why you should put a screen protector on your iPhone X right now. How to stick a protective glass on a smartphone How to stick a protective glass on an iPhone 5

Ever since the days of plastic phones, resistive films have been a screen protector. They protected the display from scratches, but in the event of a fall, the sensor may be damaged. In addition, the film worsens the view, and on the touch screen it also slows down the movement of the finger. The development of technology has led to the emergence of an oleophobic coating, from which protective glasses are made. How effective are they really?

Tempered glass is a coating that has been chemically treated. It is several times superior to the film. The surface hardness is 2-3 times greater than that of the film. Its thickness is 0.26mm, 0.33mm, even 0.5mm. Such a layer is not visible to the eye, it is difficult to feel it with your fingers, but it does not interfere with using the device. Through the transparent protective glass on the phone, a clear image is transmitted. A finger glides easily on a smooth surface.

Glass has a five-layer structure:

• silicone base that fixes the glass on the display;
• a containment layer that holds back a broken screen;
• anti-reflective layer that prevents tarnishing in bright light;
• protective layer responsible for the absence of damage;
• Oleophobic coating protects the screen from grease, fingerprints and moisture.

The manufacturing process consists in heating the surface to a high temperature and etching in reagents. As a result, the structure of the glass changes, increases the mechanical strength and hardness. Despite all these advantages, protective glass has one serious drawback. The increase in stability reduces the ability to withstand blows to the butt. The screen can withstand being dropped flat on pavement, but may shatter if hit with an angle. Even in the event of such a blow, the touchscreen still remains intact.

Each new generation of flagships is equipped with oleophobic coating. However, the protective glass on the phone gives protection from scratches and scuffs. And even for that, it's worth using.

How to choose and stick a protective glass on the phone - tips

Before sticking a protective glass on the phone, you should choose the right glass based on the screen parameters. Let's consider them in more detail.

OGS displays with 2.5D touchscreen

OGS is a touch screen that is tightly glued with a transparent adhesive to the module. 2.5D is a type of touchscreen without the usual edges, that is, with polished chamfers. Such screens were used by Apple in the iPhone. Since the sensor smoothly passes into the frame, it is impossible to stick the glass. It will hang over the edges, forming an air gap, or leave the edges unprotected.

The behavior of glass on such an apparatus depends on its quality and impact characteristics. When falling from a great height with the sensor down, the low-quality glass will burst without affecting the touchscreen. But high-quality glass will remain intact, but the sensor may suffer. Adjacent close to the screen, the glass has a higher strength than the touchscreen. But high rigidity does not allow shock absorption.

OGS displays without 2.5D

Such sensors do not have polished edges. The glass will cover the edges of the sensor. In the event of a fall from a height or a side impact, the display is less likely to be damaged. Therefore, protective glass must be glued on such screens.

On such displays, the sensor and matrix are connected along the perimeter, and between the surface there is a layer of air of 0.1-1 mm. Upon impact, such a structure flexes faster. Therefore, a protective glass should be glued to the screen. If we take into account that such displays are installed on budget models, then a smooth surface will also increase the sliding of a finger on the screen.

Before sticking the protective glass on the phone, you should prepare a napkin, alcohol, medical gloves, silicone suction cup (if any).

Usually they come with glass. Otherwise, all parts will have to be purchased separately.

Sticking should be done in a well-lit room, since in case of dust particles it will not be possible to separate the screen. Therefore, you should learn in advance how to properly stick a protective glass on a smartphone:

• 1. Degrease the screen. Putting on gloves, wetting a napkin in alcohol, we wipe the screen from streaks.
• 2. The screen should be grasped by the edges with your fingers. The sticky layer must remain intact. Otherwise, the adhesion reliability will deteriorate. The ideal option is to grab the glass with a suction cup.
• 3. Remove the protective film from the bottom side. We hold the glass at a distance of 5-10 cm from the screen so that dust does not stick.
• 4. Slowly bring the glass to the screen. As soon as it began to seize, we draw a napkin in the middle (from the speaker to the buttons).
• 5. As soon as the center sticks, we blow out the air, drawing a napkin from the middle line to the edges.
• 6. When the glass is fully adhered, you can remove the top film.

From the first time, it will not work to stick the protective glass on the smartphone correctly. In case of dust ingress, you need to peel off the edge from the corner closest to the bubble with a bank card. A gap of a couple of millimeters is enough to pull out the dust with tweezers or blow it out.

How to stick a protective glass on an iPhone

You can properly glue the protective glass on an Apple smartphone in the same way as on any other phone. First, you should disinfect your hands so that there is no dust left on the film. Then you should attach the glass to the device, try on the borders. Then remove the glass and wipe the screen with a napkin and a damp cloth. We remove the protective film and lower the glass to the screen so that all the cutouts match exactly. Smooth the surface with a napkin from the center to the edges to remove bubbles and dust. The whole process takes 10 minutes.

However, not everyone succeeds in sticking the glass perfectly the first time. Usually there are air bubbles. To get rid of them, it is enough to attach a dry rag to the place and push the air out.

How to glue the original glass

Before sticking the protective glass on the phone, you need to remove the old one.

Due to the difference in weight, glass is harder to remove than film. It is tightly connected to the touchscreen, but not by glue, but by electrostatic properties. Do not dismantle the glass with sharp metal objects. They can damage the screen, the silicone suction cup can tear off the cables.

If dismantling is carried out due to improper installation, then the easiest way to remove the glass is by using a tab at the top of the glass. The old surface can be removed by prying off the edges with a credit card, and pulling the surface gently with your hands or a suction cup. Broken glass should be removed piece by piece, starting with the largest.

During installation, it is easier to hold the new glass using a silicone suction cup. If this is not at hand, then you can use ordinary tape. It is attached to the edges of the protective glass film.

Today, most safety glass comes with cut edges. Such 2.5D sensors are completely adjacent to the screen. But due to the smaller size, they do not cover the entire visible display area. During the installation process, it is easier to eliminate the shortcomings. It is enough to hook the edge of the glass with a bank card.

Original glasses are produced as close as possible to the size of the screen. They cover the entire display. But there are always unglued edges that are noticeable when the display is off.

Especially for the Apple iPhone, Full Cover glasses are made with painted frames around the display. The glass is glued to the screen, completely repeating the shape of the smartphone.

For popular positions on Android, Full Cover glass is also released. It is glued around the perimeter and held along the edge. This affects the responsiveness of the display, dust quickly gets under it.

Service life and operation

The lifespan of the protective glass depends on how you use your phone. If the device is constantly located together with sharp objects. for example, in a bag next to the keys, the screen is quickly scratched. This will not render it unusable, but the aesthetic appearance will be violated.

Small particles and metal dust can not only clog the ports on the case, but also get under the glass. Dust and dirt accumulates under the non-glued edges. These particles can scratch the display itself.

In general, if you store your smartphone in a closed case, the glass will last for several years, ensuring not only the safety of the gadget, but also its aesthetic appearance.

Video

On iPhone 6. For example: onext protective glass. The price of which is only 150 rubles. At the same time, it perfectly protects the screen from various damages. You can not only hit it hard, but also carry out various manipulations with it with a knife.

Appearance and complete set of onext protective glass for iphone

The first thing that falls into the hands before starting work is, of course, the protective glass itself. It comes in a good package, where you can find all the features and specifications that it has:

Protective coating hardened or hybrid - what to choose?

The thickness of the flexible glass is 0.2mm. The superiority of hybrid glass over tempered glass is mainly due to its aesthetic aspect - it is thinner than standard tempered glass and better presented on the phone, especially when the protective layer does not cover the entire surface of the device. However, lovers of thin lenses may also be interested in the increasingly popular 0.15mm tempered glass thickness.

Both hardened and hybrid guards are so much faster, but they are equally easy to clean. However, it should be emphasized that tempered glass is more scratch resistant even with extremely sharp objects. Hybrids are much worse than damage, which doesn't mean they don't protect the display well. Both protective coatings can easily withstand the impact of falling objects. Unfortunately, it often happens that when the phone falls to the floor, the tempered glass is tempered, which is not consistent with the hybrid coating.

• completely transparent;
• the sides of the glass are covered with silicone so that the user is not scratched;
• the glass is real, not fake plastic;
• the perception of the screen remains unchanged with the application of protective glass;
• the glass is coated with a special layer that has the function of anti-reflective.
• Each glass can have different characteristics and properties.
• On the back of each package there is an instruction on how to glue the protective glass.

The iPhone kit usually contains: an alcohol wipe, a rag for wiping, a sticker for the button, a card for removing air from under the glass, and the protective glass itself.

When such accidents happen, it is better to bet on a hybrid. The choice between tempered and hybrid glass should really come down to where the phone is stored and whether it's exposed to sharp objects or often dropped on the floor. The individual aesthetic preferences of the smartphone user are also important. A large selection of glass screen protectors makes it easy to choose the right lid, whether you choose the tempered or hybrid version.

It is a popular editor among software developers because these are color - coded keywords that make it easier to edit source code . Granby received a Bachelor of Science degree in Computer Engineering from Purdue University. When choosing a phone case, perhaps the most important thing to consider is what your lifestyle is, where you work, and how you spend your free time, ie. What environment are you using your phone in? If you work in an office, you like cleanliness, order, and are very careful - it goes without saying that you can do without a tray.

Protective glass application

• Wipe the screen thoroughly with an alcohol wipe.
• Then carefully wipe with another, dry, napkin that comes with the kit.
• We peel off the protective film (number two) from the glass itself, while holding the glass at the edges.
• Next, we try to put it very evenly and carefully on the screen of our phone.
• Then you need to press your finger on the center of the screen (for better docking of glass and screen). Further, this speck expands, which indicates that the glass began to stick on its own. This process may take several minutes.
• After all the glass has stuck, we expel the air remaining under the glass with the help of a card, gently smoothing it from the middle to the sides.
• We remove the protective film number one.

The color gamut of the screen, its sensitivity and tactility did not suffer, as you can see for yourself. If necessary, you can stick an additional button "Home", which is included in the kit.

If you work in construction, farm work, athletics, enjoy outdoor activities, and never hold onto your phone, then you need to consider protecting your phone from bumps, dust, and scratches. Generic cases may not be the same unless you go to a phone accessories store from different options, checking out each one. The extra glass on the screen will give you even more protection. The screen does not shock, it will be resistant to mechanical scratches when interacting with sharp objects, sand, moisture and other contaminants.

You can also verify the strength of the glass by using a screwdriver or ordinary keys as an irritant, because it often happens that our glasses become their victims.

For clarity, you can watch a video on how to stick glass on an iPhone

The iPhone 7 Plus has a larger screen, which means it has more scuffs and scratches. Therefore, it is worth considering buying a good tempered glass screen protector, if you are looking for the best screen protectors for iPhone 7, look here. If you are looking for tempered glass for iPhone 7 Plus, check out the list below.

Protective glass Deppa 3D

Designed specifically for the iPhone 7 Plus (and iPhone 6s Plus), the Deppa 3D Protective Glass is 3D Touch compatible so no cracks or bubbles appear when pressed hard. It's real tempered glass, but it's designed so that if it breaks, the pieces are harmless, ie. it will not damage the screen or cut your hands.

This screen protector is coated with an oleophobic coating that repels grease from your hands, keeping the screen clean and fingerprint-free.

The Deppa 3D protective glass is very transparent, so after it is applied it is almost invisible. It comes with a microfiber cloth, a degreasing cloth, a sticker to remove dust particles, and a sticker for easy glass installation.

Safety glass Red Line Tempered Glass

Red Line is proud of its "world's thinnest" phone screen protectors. The thickness of their glasses is 0.2-0.3 mm, so that the sensitivity of the pressing force is not lost at all and it is even imperceptible that this glass is there.

The Red Line Tempered Glass is ideal for people who also use an iPhone 7 Plus case, as it leaves a slight indentation around the edges.

With a hydrophobic and oleophobic coating, this screen protector will always be clean and you won't have to carry a microfiber cloth with you.

The kit comes with two protective glasses and a guarantee for bubbles and cracks, Red Line promises to replace the glasses for free.

uBear Nano Full Cover Premium Glass

Another tempered protective glass, this time from uBear. Its protective glass is almost as thin as the previous one, 0.3 mm, and uBear promises 99% transparency, so after the sticker it should not be visible on the screen.

This protective glass completely covers the flat part of the iPhone 7 Plus screen, leaving a small space around the edges. Without a case, you might notice a ring around the screen where the screen protector doesn't cover. This is a fairly common "halo effect" today, as most phones have beveled edges around the edges.

uBear Nano Full Cover Premium Glass Tempered Glass comes with a lifetime warranty, so if bubbles start to appear, just report it to uBear and get a free replacement.

Safety glass NILLKIN

I personally used the protective glass NILLKIN, however, it was on the iPhone 6, but the glass lasted three years. Nillkin 3D CP+ is a real ballistic glass made from 5 layers of Japanese Asahi glass, the same company makes windshields for Mitsubishi.

Lifetime warranty on NILLKIN, and the company's website says that the warranty applies even if you get confused during the sticker and pasted incorrectly, you will receive a free replacement.

It's important to note again that the iPhone 7 Plus has curved edges, so these screen protectors will only cover a flat surface to prevent bubbles and peeling. With Nillkin 3D, you get superior transparency, unobstructed pressure sensitivity, and 3D Touch compatibility.

Baseus 3D Arc Tempered Glass

Baseus is also considered one of the best manufacturers of protective glasses for screens, if you do not want to glue the film, but want glass, you should pay attention to this particular manufacturer. Its safety glasses are made from a single layer, which combines all the qualities of a laminated safety glass.

Baseus 3D is classified as a "smart film" as it easily adheres to the screen of the iPhone 7 Plus and has the ability to self-adjust when removing minor scratches as if no one was there.

Like any protective glass, Baseus 3D has a warranty period, so if you are not satisfied with the quality, please let Baseus know.

Tempered Depp glass

Deppa tempered glass is completely transparent and barely visible on the screen of the iPhone 7 Plus. It's 3D Touch compatible, so you won't lose touch sensitivity or access to amazing touch features. It is scratch-resistant and if it breaks, it will not scratch the screen, since the edges of the glass are blunt when broken.

Includes protective glass, microfiber cloth, degreasing cloth, sticker to remove dust particles, sticker for easy glass installation. The glass costs 909 rubles.

What do you protect the iPhone 7 Plus screen with?

Do you want to recommend protective glass and use it yourself on iPhone 7 Plus? Write about it in the comments below!

The screen of any communication gadget needs protection. Even if you have purchased the latest iPhone model, do not neglect the opportunity to install an additional film on the display. This will extend the life of the phone, make it look attractive longer. Such mechanical damage as scratches, bumps will not be terrible if you know how to stick a protective glass on your phone. The task is not easy, but if you follow the instructions, you can do it at home without outside help.

How to stick a protective glass on a smartphone

For a beginner, the procedure may seem complicated, but a few workouts will make you a real expert. It is worth noting that there is no significant difference in whether we glue a protective glass on an iPhone 5, other phone models or a tablet. The procedure remains the same. It is better for an inexperienced person to start from the back of the gadget, and then move on to the screen.

Necessary materials and tools

If you have just purchased a smartphone, then it is important to understand how to stick protective glasses on the phone. The display of the device is very sensitive to mechanical damage. Being just in your pocket, the gadget will be damaged by coins, a fingernail or keys. Even minimal scratches can cause bubbles to form during application. The same goes for situations where you just want to replace your old phone protection.

For the procedure you will need:

• alcohol wipe;
• dry cloth;
• special liquid for cleaning TV or computer screens;
• adhesive tape or dust collector;
• glass.

Step-by-step instruction

An important point is the preparation of the workplace. Choose a room with a minimum amount of dust. A kitchen or bathroom is best. There is too much textile in the bedroom, which attracts particles to itself. Such a moment prevents the correct process and can complicate the procedure. If you do not know how to stick a protective glass on your phone, follow the steps:

1. Wash your hands with soap and water, then lay out the equipment, the protective glass for the iPhone 6 or other phone on a clean, smooth surface.
2. Before starting the procedure, remove the old film from the device. To do this, pull slightly on the edge at a 60 degree angle.
3. Use an alcohol wipe or cleaning cloth to remove dirt from the phone screen. Such a tool is sold in hardware stores or made independently. To do this, you need to mix 5:1 water and alcohol, add some dish gel there.
4. We rub the display to a shine. If there are dust particles, then we pass along the surface with adhesive tape or a dust collector.
5. We take the device out of the package and remove the film from it.
6. We set the protection so that it matches the central button of the gadget and the speakers.
7. Swipe down the center from top to bottom to secure the patch surface.
8. We expel the remaining air from the center to the edges with a credit card or a spatula, which is often included.

Do not press too hard on the screen to remove small air bubbles. They will disappear on their own within a few days after the procedure. As a result, you should get a smooth, perfectly even screen coverage. Although tempered glass on the phone has a thickness of only 0.18 mm, it perfectly protects the device from mechanical damage.

Is it possible to re-glue the protective glass on the phone

High-quality surfaces for iPhone 5s and other gadget models can be reused. To do this, carefully remove the glass and treat the adhesive side with formic alcohol. Gently wipe it with a cloth soaked in such a liquid, and let it drain a little. Then set the protection according to the speaker and the button. With light movements from the center to the edges, expel air and liquid. Small bubbles will disappear on their own in a day.

Video: how to glue protective glass without bubbles

The videos below will tell you how to equip a gadget display at home without the help of a specialist. You will learn how to stick screen protectors on phones or tablets. With such a coating, the screen will be reliably protected from negative impacts, which will allow it to retain an attractive appearance for a longer time. Protection will protect the device from scratches, as well as absorb shock when dropped. In this case, the sensitivity of the sensor of your phone will remain the same.

A smartphone is an expensive thing. Even when purchasing a budget class device from 5 to 15 thousand rubles, we want it to serve for a long time and faithfully. The fidelity of the gadget, in turn, depends on two parameters: internal and external. And if we cannot influence the first one (represented by the hardware), then we can overcome external factors just the same. We can protect our smartphone, if not from drowning, then from mechanical impact, for sure. And the glass on the phone will help us in this. How to glue it? This is what we will talk about today.

What is safety glass for?

It is hard to disagree with the fact that prolonged use of any smartphone does not imply the appearance of chips, cracks, scratches, scuffs. This fate is typical not only for the side faces, the top and bottom ends and the back panel, but also for the front part. And there is perhaps the most important element - the smartphone screen. Protective glasses were invented precisely in order to protect the display of the device. You can use a film, but it has a lower protection factor. In any case, it is important to know how to properly glue the protective glass on the phone.

What does it represent

The appearance of the protective glass is similar to the exterior of the film. Indeed, the tasks of these two elements are similar to each other. However, it is rightfully considered to be a more reliable component, since it has a higher density compared to the film. In addition, it is transparent and flexible, and this also has a certain importance. Of course, it will cost more than the film. However, it is worth it, especially in cases where there is either a high probability of mechanical impact, or when the gadget is really expensive. For everyone, this bar is different, but most users prefer to buy glasses if their devices cost more than 10-15 thousand rubles. When buying, the user reduces the likelihood of damage to the main screen to almost zero, since the entire blow will be taken by the above component. Before talking about how to glue on the phone, I would like to focus on the advantages of the element.

Functions and useful properties

Much can not be said about the functions of the protective glass. From its name it is already clear why it was developed and what it is intended for. Whether it's a feature that you can talk about for hours. Their list, for example, includes resistance to scratches and other similar damage. Someone may doubt this parameter, but usually all doubts disappear after an indicative test. To do this, you can use ordinary keys. Run the sharpened edges across the glass and you'll see that it doesn't really mark.

The second useful property of protective glass is shock absorption. We have already mentioned this briefly above. A large number of smartphones, when dropped down the surface of the screen, receive physical damage up to the complete breakdown of the display. With protective glass, this problem will be solved, because it will break instead of the screen. By the way, the word “break” here should also be understood a little differently from its usual meaning. Fragments from the phone protective glass do not scatter to the sides. Finally, we can note the fact that the glass is held very, very reliably. Especially if we compare it with a simplified element - a film. Users who so often ask questions about how to properly glue glass on a phone can be glad to know that this operation does not require any special experience.

We consider a complete set

A very large number of requests are related precisely to how to glue the film (glass) on the iPhone 6 phone. However, it should be understood that the process is, in general, similar for other devices. And why then dwell on specific models, if you can describe the operation universally? First of all, let's see what is in the package with protective glass? Different manufacturers offer different equipment, but usually there is the glass itself, an alcohol wipe and a cloth made of a special material. If there are no rags or napkins, then you can use improvised analogues, this is unprincipled.

Glass on the phone: how to glue? We prepare the surface

If you have previously installed a film or glass, these components will need to be removed. To do this, remove the cover, if there is one, then we cling to the edge of the element. To prevent the appearance of greasy stains on the glass, you should thoroughly wash your hands and dry them in advance. By the way, the preparation of the workplace remains an important step. You need a flat horizontal surface and powerful lighting. It could be, for example, a table. Lighting will help to avoid unnoticed streaks and dusty areas. So what does it take to integrate glass on a phone? How to glue it? The correct operation will only be if the “bare” screen is processed in advance.

Why do you need cleaning

The screen freed from film or glass should be cleaned with a damp disc soaked in alcohol or an alcohol wipe. Wipe the screen thoroughly so that no dirt remains on it. After that, you should wipe it with a special cloth, if it is included in the kit. If not, then you need to find an analogue. Now it's time to attach the glass to the phone. How to glue? Let's find out further.

The most important stage

There is a special film on the adhesive side of the glass. It needs to be removed. After that, we apply the glass itself to the screen. Care should be taken to ensure that it is aligned with the edges of the device, combined with the speaker and controls. By the way, you need to remember that you can only hold the protective glass by the edges. Only in this case there will be no traces after the operation. When the fit is complete, simply lower the component onto the screen. The glass will stick on its own. Great, now we know how to glue the glass on the phone.

Are there any cons

Yes, like other elements, protective glass has some drawbacks. Some users who are interested in the topic may think that the main disadvantage is the exponential complexity of the integration process. Like, if you stick it wrong the first time, then you can’t do anything later. In fact, it's not about that right now. The main disadvantage of this component is the fact that the apparatus on which you will glue it will become more voluminous and heavy. However, if this does not bother you, and you are not very sensitive to the weight and size indicators of the phone, but you want to protect it, then you can contact mobile phone stores. They will offer not only the best products, but for extra money they will be able to glue the glass with high quality.

Pitfalls and tricks

Most users are afraid of air bubbles. Or rather, that they will remain. Few people can boast that they glue the protective glass neatly the first time, and there are no bubbles. However, they can be easily dealt with with a dry cloth. The procedure is simple to horror: just squeeze out the bubbles from the center to the periphery. The ability to glue protective glasses will save money that is charged for this procedure in mobile phone stores.

Prices

Now protective glasses are quite important and common accessories. Therefore, a large number of companies are engaged in their production. Budget options are represented mainly by Chinese firms, which was to be expected. However, they are not that bad. Glasses of different brands differ only in the degree of hardening. However, one should not think that glass from a Chinese company will not provide the necessary degree of security. Now, after we learned how to glue tempered glass on a phone, we can move from words to deeds.

Despite the high quality of the materials used in the manufacture of modern gadgets, there is a need to protect them from bumps, drops or moisture. For iPhone users, this is very important. After all, everyone knows that Apple products are expensive, they need care, no one wants to accidentally destroy, for example, two monthly salaries in a few seconds.

Fortunately, manufacturers have taken care of creating accessories that ensure the safety of devices. So, special films or protective glasses are provided to protect the screen. The latter, in turn, are presented to the buyer with different thickness parameters.

How to stick protective glass on iPhone?

Of course, you can stick the protective glass directly in the store when buying it. However, this is not always convenient, and some stores provide such services for a fee. Although it is small, you can still do this work yourself:

• First you need to remove the case from the smartphone (if any);
• If there is an old screen protector, it should be removed;

Open the package with new glass. Usually, napkins are supplied with the device. One for degreasing, it contains alcohol, and the second - to remove dust from the display;

• Wipe the screen with an alcohol-containing cloth;
• The second is to remove stains and dust;
• Remove the glass from the package and remove the sticker from it.

• Align the glass at a distance, guided by the button and the speaker;
• Gently lower the glass onto the display.

If air remains under the glass after this procedure, it can be removed with a plastic spatula. However, if there are microscopic bubbles, you should not worry, they will come out on their own after a while.

If dust has got under the glass, then you need to bend the glass from the side of the damaged area and carefully remove the dust with the help of adhesive tape. Then again you need to press everything back. If you are doing this for the first time and you do not succeed, then do not worry, the procedure requires practice, even if the first pancake is lumpy, do not despair.

In general, this work takes a few minutes. However, the result of such efforts is fully justified. With an iPhone screen protector glued on, you won't have to worry about your screen being scratched or chipped.

How to stick a protective glass on the iPhone screen