Nowadays most laptops and computers are not equipped with optical discs, which means that you need to use an external drive if you want to watch DVDs on your laptops. This would bring a lot of inconvenience, since it is impossible to constantly bring DVDs and an external drive with you.
So is there a more convenient way to watch DVDs? You can convert DVDs to digital formats. You can then store DVDs in your laptop, USB, and more. You can store as many DVDs as you want, as long as you have enough disk space. WonderFox DVD Ripper Pro is a software that helps you rip DVDs to over 300 formats and devices.
With this software, you can learn how to convert DVDs within 3 steps. Let's take a look at the software and see how to use it.
Open the software and select DVD source
As you can see, most of the interface is occupied by three large buttons. You can select buttons based on your DVD content. It supports you to choose from: DVD Disc, ISO Image and DVD Folder.
After clicking on “DVD Disc” you will be prompted to select a drive. Simply select the driver letter that contains your DVD and click OK.
Select output video format
The next step is to choose the output format you want. After successfully loading the DVD into the software, you can see the list of movie titles. This software will automatically select the main movie for you. All you have to do is choose the output format that suits your device. You can choose from: MKV, MP4, AVI, H264, MTS, M2TS, FLV, SWF, HTML5, WEBM, TOD, VOB and more.
In addition, you can also select a digital device directly. You can choose from major manufacturers such as Apple, Samsung, Microsoft and more.
Click "RUN" to start the conversion process
The last step is extremely easy. After the output format is set, you can click "RUN" to convert DVD. The video settings are already automatically optimized by the software. There is no need to change any settings if you are not familiar with the video format. However, it also allows you to customize your video settings if you're an advanced user. For example, you can adjust settings such as bit rate, frame rate, resolution, and more.
A laptop is a portable computer.
A laptop is just like a personal computer. And it has the same parts, only smaller. That's why laptops are more expensive.
A laptop can be compared to a mobile phone, and a regular personal computer can be compared to a regular home phone.
In order to open a disk, floppy disk or flash drive on a laptop, you must first insert them.
Let's start with the floppy:
Look at the laptop:
If the laptop has a special floppy drive, that is, a floppy disk drive, then you can open the floppy disk. But most laptops do not have this drive, as floppy disks are considered obsolete and unreliable.
You can learn more about floppy disks by reading the article "Diskettes".
To insert a floppy disk, there should be a hole like this:
If your computer does not have such a hole, then you can skip the next paragraph.
We insert the floppy disk in the direction of the arrow that is drawn on it, until it stops (until it clicks). After you have inserted the diskette, go to "My Computer". It is located either on the Desktop, that is, on the screen, or it can be opened from the Start button:
Then double click the left mouse button on the icon
"Disk 3.5" (A):
You will see what is written on the diskette (files and folders). To get the diskette out of the computer, you must first close all the files and folders that you opened from the diskette. Then press the small button under the hole into which the floppy disk was inserted. The floppy disk should pop out of the laptop by itself. Now about how to open a CD or DVD disc:
Either on the side or front of the laptop is a disk drive. It's called a CD or DVD drive.
To open it, you need to click on a small rectangular button.
When you press this button, you will hear a click and the drive will slide out of the laptop a little. Gently "help" him move forward until it stops. Then you need to literally “put” a disk on it with the shiny side down and “push” it into the laptop until a familiar click. After you have inserted the disc, wait 15 seconds: the disc may open by itself (this happens with discs that contain movies and music). If it doesn't, open the My Computer icon. It is located either on the Desktop, that is, on the screen, or it can be opened from the Start button:
Then double-click the left mouse button on the "CD drive" icon (may also be called a CD-RW, DVD, DVD-RW drive).
What is written on the disk will open.
Now let's learn how to open flash drives on a laptop. The flash drive looks like this:
In order to open a USB flash drive on a laptop, you need to insert it into a special hole:
You will find several of these holes either on the side or behind.
After you insert the USB flash drive into one of the holes, open "My Computer" (recall, it is located either in "Start" or on the Desktop).
There should be a new icon there. For example, like this:
Usually this icon is called "Removable Disk". Double click on it with the left mouse button. You will see what is written on the flash drive (files and folders).
Before removing the USB flash drive from the laptop, click on the special icon at the bottom right (next to the clock) once with the left mouse button.
The message "Safely Remove USB Mass Storage Device" appears. Click on it once with the left mouse button. The message "Hardware can be removed" will be displayed. Now you can get the flash drive from the computer.
sites.google.com
How to watch a DVD disc on a computer or laptop, how to insert a disc correctly
There are many special players for reading DVDs.
Among them: PowerDVD, Windows Media Player, Media Player Classic.
To view the contents of the disc, you will need one of these programs.
The easiest way is to use the media player used by many Windows users, Media Player Classic.
It is worth remembering that the standard player sometimes does not recognize digital signatures and codecs, so you have to use other players.
Launching with PowerDVD
Unlike Media Player Classic, this program is paid. It can read any media format, from MPEG and MP3 to ASF and WMA.
Launching with Windows Media Player
This program is found in every Windows computer, which makes it very convenient for reading discs. Playback manipulations are exactly the same as for Media Player Classic, but this player has a number of its own features. 
The player does not play files because:
- The DVD was recorded in a different region. Mircosoft products have algorithms that prevent pirated recordings from running.
- The default player conflicts with other players. In such cases, you must refuse to use third-party software.
- The computer's optical drive is damaged.
- The file format is not compatible with the player.
composs.ru
Booting from a disk in a laptop
Booting from a disk in a laptop doesn’t work, the instruction is lost, I pressed all the buttons on the keyboard as much as possible, as a result I started some process, now Windows doesn’t boot, I can’t get into the BIOS either, help, HP laptop. When I read this request friend, he said an interesting phrase: "Can you imagine what will happen when it gets into the BIOS?" I imagined and even began to be afraid not for a laptop, but for a girl, because you can boot from a disk in a laptop without changing the settings in the BIOS.
We will give two examples with an HP laptop and a Sony VAIO. So our first laptop is HP.
I want to note that the principle of changing the boot device is not the same for all laptops, and if you have experience with a device from one manufacturer, most likely you will experience difficulties with a laptop from another manufacturer. But as they say, you don’t have to be afraid of difficulties, think, because this computer is yours, aren’t you interested in finding out how it works, but with such things as setting boot from a disk in your laptop or getting into the BIOS, all the more you have to deal with. I hope our article will help you and yet, as soon as we get a laptop from any other manufacturer, the download selection screenshots will immediately be added to this article. Let's start with an HP laptop. One of the largest information technology manufacturers in the world made sure that we would not experience problems when working with his device and setting it to boot from disk is very simple.
When you turn on the laptop, a prompt appears->Press ESC to load the start menu, click.
The menu appears:
F-1 system information F-2 diagnostics F-9 (changing boot settings) will give us the opportunity to boot from a disk on a laptop without going into BIOSF-10 terrible BIOSF-11 laptop factory reset We skip the first and second points and it’s so clear, let’s press F-9 Boot Device Options (change boot settings) and see what happens, clicked
such a window appears, where they explain to us in the language of a potential enemy that if we are afraid to enter the BIOS, we can change the boot of the laptop from the disk here. We are happy and with the help of the F-10 key, we can change the boot priority, by the way, now the boot is set just from the disk, and if we reboot, and there is a DVD with the operating system in the drive, its installation will begin. The deed is done, and now, with the most daring, consider our BIOS, exit this menu and press ESC, a reboot occurs. When choosing the start menu, press ESC again and then F-10 
And here we are in enemy territory, select the System Configuration option with the arrows on the keyboard and press Enter 
Before us is the menu of this menu, select Boot Options 
Here we allow or prohibit changing the boot from any device. I explain, for example, you see the latest device Internal Network Adapter (network boot) set to Disabled, 
it means network boot is prohibited, if we set Enabled, then firstly, network boot will become possible, and secondly, the offer to boot over the network will appear at the very beginning, in the start menu. The start menu appears when the laptop is booted, when you first press ESC and then F-9, where without entering the BIOS you can change the boot priority to the drive, this menu will look something like this. Note: unfortunately, we already gave away the laptop when writing the article, so screenshot made in photoshop. 
Now go back and select the Boot Order option and press Enter 
in this menu we see that the laptop is ordered to boot from the hard disk, 
and we can choose what our heart desires, we want and boot from a flash drive, by the way, loading from a USB device is a little lower. By the way, you forgot that we are in enemy territory, so we quickly change the boot from the hard drive to the drive, move using the keyboard to our CD / DVD ROM, then using the F-6 key, as indicated on the right side of the BIOS window, we extend the CD / DVD ROM to the first position. 
Next, ESC, exit this menu, then ESC again and move to the Exit option, press Enter, we are asked to save the changes, we agree Yes. 
A reboot occurs and if there is a Windows disc in the drive, the installation process will begin. It's the Sony VAIO laptop's turn. When you turn on the laptop, a prompt also appears to press F12, but it means booting over the network, we don’t have instructions for the motherboard, in order to get into the BIOS, you basically need to press F2 or Delete when loading, less often, even less often, press F2 and enter the BIOS 
Using the arrows on the keyboard, select the Boot tab, which is responsible for changing the boot device, and press Enter 
On the Boot tab, we see that the flash drive is set as the first boot device, select it using the keyboard and press Enter In the menu that opens, select our Internal Optical Disc Drive 
Disk drive is currently set as the first boot device www.imspice.ru
How to boot a laptop from a disk through the BIOS
In order to start a laptop from a disk, you need to change the boot order of devices. By default, a working laptop has the following order: hard drive, DVD drive, flash drives, and so on. The CD can contain both an operating system installer and a full-fledged mobile version of the operating system, so that if the laptop OS fails, you can fix it or save important data before reinstalling the OS.
To enable booting from a CD, you need to enter the BIOS by pressing the "Delete" (Del) or "F2" button after switching on and before loading the operating system. On some laptops, there are other BIOS entry buttons, but they are so rare that they are rather an exception to the rule.
In the BIOS, select the "Boot" or "Boot menu" tab. If there are no such tabs, in the “Advanced” tab you need to look for the line “Boot” or “Boot priority”. In the tab or in the "Boot" line, you should set the boot order so that the drive is in 1st place.
After that, you need to press F10 and Enter, or select Save settings and reboot in the last tab, thereby saving the new boot order settings.
Insert the boot disk into the drive, now booting from the CD will be done automatically. After carrying out all the operations that require booting from a disk, you should go back into the BIOS and set it to boot from the hard disk for the first time. You need to do this for faster loading of the operating system.
If the first in line is booting from a DVD disc, then every time the laptop is turned on, the drive is first polled, and after the computer realizes that there is no disc in the drive or the disc is not bootable, it boots from the hard drive. This increases the boot time of the operating system.
SovetClub.ru
How to put boot from disk on HP
About the BIOS (Basic Input / Output System), each user remembers only when you need to reinstall the operating system from the disk. The key combination that calls the start menu with the necessary options for each laptop depends on the laptop motherboard model. When loading, the system gives a hint for a certain combination, for example, for HP laptops, this is the “Esc” button - “Press the Esc key for Startup Menu”.
One of the largest information technology manufacturers in the world, Hewlett-Packard, not only took care of the trouble-free entry to the start menu to reset the boot parameters, but also developed two options for changing the settings: without entering the BIOS and directly in the BIOS environment. You can select the desired item in the start menu:
- "F-1" - system information,
- "F-2" - system diagnostics,
- "F-9" - change boot settings,
- "F-10" - BIOS,
- "F-11" - restore the factory settings of the laptop.
Item "F-9" allows you to change the boot settings without using the BIOS menu. Selecting this item gives you the choice between a CD/DVD drive and an HP notebook hard drive. Navigation is carried out using the cursor keys, that is, the up and down arrows. The selected option is activated by pressing the F-10 key, which confirms the changes in the settings and, with the CD / DVD disc with the operating system inserted in the drive, starts loading it.
Item "F-10" opens the BIOS environment for changing parameters. Navigation is also carried out by the cursor control keyboard. The name of the current section or subsection is displayed in the upper part of the window. To change the settings, you need the “System Configuration” section. In the menu that opens, the “Boot Options” section is responsible for the changes, which provides a list of possible sources for loading data. If any value from this list is activated, then the value "Enabled" is in quotes opposite it, if not, then "Disabled". Accordingly, activate "CD-ROM Boot". Below the list of possible activations, there is the “Boot Order” option, which you must enter in order to change the order of boot locations. By default, the list is headed by the laptop's hard drive; to change the list, use the "F6" key to move "CD / DVD ROM" up to the first position. To exit to the main BIOS menu after the necessary changes, use the "Esc" key. In order for the changes to be saved, you need to confirm them when you exit the BIOS.
If in both cases, when changing the parameters, loading is not performed from the selected CD / DVD disk, then you need to make sure that the disk is multiboot, that there are no defects or damage to the disk. You can use Nero Express 6 to create a multi-boot disk with an operating system such as Windows XP.
After restarting the HP laptop, the operating system will boot from the disk drive. After installing the system, you will need to go into the BIOS again and return the boot settings from the hard drive.
is a portable computer.
This is the same computer as a stationary one and it has the same parts, only smaller. That's why laptops are more expensive.
It can be compared to a mobile phone, and a regular computer to a regular home phone.
In order to open a disk or flash drive on a laptop, you need to insert them first.
Let's start with a CD or DVD:
Look at the laptop:
Either on the side or in front of it is a device for disks. It's called a CD or DVD drive.
To open it, you need to click on a small rectangular button.
When you press this button, you will hear a click and the drive will slide out of the laptop a little. Gently "help" him move forward until it stops. Then you need to literally “put” a disk on it with the shiny side down and “push” it into the laptop until a familiar click.
After you have inserted the disc, wait 15 seconds: the disc may open by itself (this happens with discs that contain movies and music). If it doesn't, open the My Computer icon. It is located either on the Desktop, that is, on the screen, or it can be opened from the Start button:
Then double-click the left mouse button on the "CD drive" icon (may also be called a CD-RW, DVD, DVD-RW drive).
What is written on the disk will open.
Now let's learn open flash drives. They look something like this:
In order to open a USB flash drive on a laptop, you need to insert it into a special hole:
You will find several of these holes either on the side or behind.
After you insert the USB flash drive into one of the holes, open "My Computer" (recall, it is located either in "Start" or on the Desktop).
There should be a new icon there. For example, like this:
Usually this icon is called "Removable Disk". Double click on it with the left mouse button. You will see what is written on the flash drive (files and folders).
Before removing the USB flash drive from the laptop, click on the special icon at the bottom right (next to the clock) once with the left mouse button.
The message "Safely Remove USB Mass Storage Device" appears. Click on it once with the left mouse button. The message "Hardware can be removed" will be displayed. Now you can get the flash drive from the computer.
This seems obvious, but not to everyone. For many new laptop owners, playing DVDs on their new Acer laptops is not as easy as it sounds. In connection with my work, I am often asked this question. Here are some easy solutions to get you to run DVD on your Acer laptop.
Instruction
- 1 Make sure your laptop has the ability to play DVDs. The laptop should have a picture of the familiar white logo on the sliding cover of the DVD drive. If this image is not present, then you will only be able to play CDs.
- 2 If you find the DVD logo, press the button on your Acer to pop out the DVD drive cover.
- 3 Place a DVD in it face up and gently push the cover back in and then wait for playback to start automatically or a menu to appear.
- 4 If DVD playback does not start automatically (or when you see a selection menu), you will need to set up autoplay. In Microsoft Windows, click on the "Start" -> "Control Panel" -> "AutoPlay" button and select automatic DVD playback.
- 5 If you have Windows Vista Home Basic Edition installed, Windows Media and Real Player may not play DVDs correctly. You may want to download a free player from download.com. Then you will have to start the player manually each time.
- 6 Select what action you want the Windows operating system to take each time you launch a DVD on your Acer laptop (from the drop-down menu). You will have at least two media players to choose from or you can select "Do nothing" if you are not using the media player via the pop-up menu.
- 7 Pull out the DVD and reinsert it into your Acer notebook. Now all your DVDs will play successfully every time with the player of your choice.
- 8 Locate the control buttons at the bottom of the screen. These are standard DVD controls such as the volume control or the pause button. You can press F11 for full screen view if you're comfortable with the settings.
This is a portable computer.
A laptop is just like a personal computer. And it has the same parts, only smaller. That's why laptops are more expensive.
A laptop can be compared to a mobile phone, and a regular personal computer can be compared to a regular home phone.
In order to open a disk, floppy disk or flash drive on a laptop, you need to insert them first.
Look at the laptop:
If the laptop has a special floppy drive, that is, a floppy disk drive, then you can open the floppy disk. But most laptops do not have this drive, as floppy disks are considered obsolete and unreliable.
You can learn more about floppy disks by reading the article "Diskettes".
To insert a floppy disk, there should be a hole like this:
If your computer does not have such a hole, then you can skip the next paragraph.
We insert the floppy disk in the direction of the arrow that is drawn on it, until it stops (until it clicks). After you have inserted the diskette, go to "My Computer". It is located either on the Desktop, that is, on the screen, or it can be opened from the Start button:
Then double click the left mouse button on the icon
"Disk 3.5" (A):
You will see what is written on the diskette (files and folders). To get the diskette out of the computer, you must first close all the files and folders that you opened from the diskette. Then press the small button under the hole into which the floppy disk was inserted. The floppy disk should pop out of the laptop by itself. Now about that how to open CD or DVD disk:
Either on the side or front of the laptop is a disk drive. It's called CD or DVD. drive.
To open it, you need to click on a small rectangular button.
When you press this button, you will hear a click and the drive will slide out of the laptop a little. Gently "help" him move forward until it stops. Then you need to literally “put” a disk on it with the shiny side down and “push” it into the laptop until a familiar click. After you have inserted the disc, wait 15 seconds: the disc may open by itself (this happens with discs that contain movies and music). If it doesn't, open the My Computer icon. It is located either on the Desktop, that is, on the screen, or it can be opened from the Start button:
Then double-click the left mouse button on the "CD drive" icon (may also be called a CD-RW, DVD, DVD-RW drive).
What is written on the disk will open.
Now let's learn open flash drives on a laptop. The flash drive looks like this:
In order to open a USB flash drive on a laptop, you need to insert it into a special hole:
You will find several of these holes either on the side or behind.
After you insert the USB flash drive into one of the holes, open "My Computer" (recall, it is located either in "Start" or on the Desktop).
There should be a new icon there. For example, like this:
Usually this icon is called "Removable Disk". Double click on it with the left mouse button. You will see what is written on the flash drive (files and folders).
Before removing the USB flash drive from the laptop, click on the special icon at the bottom right (next to the clock) once with the left mouse button.
The message "Safely Remove USB Mass Storage Device" appears. Click on it once with the left mouse button. The message "Hardware can be removed" will be displayed. Now you can get the flash drive from the computer.
