Disable driving mode on samsung. Disabling Automotive Mode in Android

Sometimes our blind users are interested in what program can be used to make them say the name or number of an incoming call? So on Samsung S3, Android 4.3, no additional software is required for this. There is quite a decent built-in solution that you just need to simply turn on.
I will also draw your attention to the fact that "Driving Mode" may be called "Hands-Free Mode" on other Samsung devices.

This feature is enabled along the way:

• (Settings\My device\Drive mode);

You can also enable it differently, through the notification panel. On the notification panel, you need to find the "Handsfree mode" icon, which enables / disables this setting. Tapping twice while holding on the icon opens the driving mode settings. If you have a device from Samsung, then it may still be worth checking the availability of this functionality on it, maybe it will also flicker on your device. For some reason it seems to me that this setting refers to the S-voice application, who is not in the subject, such an application is a built-in voice assistant. If you have this application pre-installed, then in all likelihood the driving mode will be in place.

In general, we set the desired switch in the "Driving Mode" section to the "ON" position. And check the boxes for the items that you need the most.

1. Incoming call - Speak caller information when receiving calls;
2. Messages - Speak sender information when receiving new messages;
3. Alarm clock - Speak alarm information when an alarm goes off;
4. Schedules - Speak details of a scheduled event when an alarm is triggered;

After the "Incoming call" setting is enabled, the smartphone will say the name or phone number three times with the ringtone fading out and with a short interval between notifications. If suddenly, for some reason, this mode does not work correctly, then as one of the options in the talkBack settings, try unchecking "Voice Caller ID".

I also discovered such a thing that with the help of the Vocalizer Expressive engine, you can make the pronunciation of the incoming name / number in the voice of Yuri. For example, you use the default voice of Milena, and the name / number will be pronounced by Yuri. Or you can also do it in reverse voice order. To do this, go to the parameters of the TTS module of the engine. Next, select the "Settings for VocalizerEx TTS" section, where in the "Russian" item we select Milena, and in the "Russian (Russia)" item we put Yuri. We go back one step, there we select the section "Language - the choice of voice for pronouncing the text for a specific language" and mark the flag "Russian". After that, by default, you will have Milena, and the incoming call will be played by Yuri. If you need to do it in the reverse order, then in the "Settings for VocalizerEx TTS" section, change the voices in the "Russian" and "Russian (Russia)" items in places.

By the way, with the SmartVoice engine, this also works. To do this, press the "Open TTS module parameters" button, go to "Settings for SmartVoice", in the "Setting automatic language switching" section, check that all the boxes are unchecked there. In addition, in the paragraph "Preferred language for pronouncing the Latin alphabet" English was chosen. This is necessary in order for the English text to be pronounced by the English voice speech synthesizer, and not by Russian. After we go to the "Selecting voices" section, and do everything there by analogy. As I described above, for the Vocalizer Expressive engine.

Anyway, good luck everyone, keep practicing.

Content:

Smartphones on Windows Phone and Android platforms have a special “Driving Mode” that can be activated when a Bluetooth headset is connected. Driving Mode is meant to encourage safe driving, but if you need to turn it off for any reason then that task is easily accomplished on any of the platforms.

Steps

1 windows phone

1. 1 Look at the top of the screen. When Driving Mode is enabled, you will see the Driving Mode icon in the center of the screen.
   • The driving mode icon resembles the back of a car.
   • Please note that once you have set up Driving Mode on your smartphone, it will turn on automatically when you connect a paired Bluetooth headset if the smartphone's screen is turned off. If the screen is on, then Driving Mode is enabled only with your consent.
2. 2 Find Settings in the application list. Go to the application list and select Settings.
   • To open the list of applications, swipe left on the main screen of your smartphone.
   • Paragraph Settings is at the top of the list, but you may need to scroll up or down the list.
   • You can also press the letter "H" on your smartphone keypad to navigate to applications starting with the letter "H" and then select Settings.
   • Also to select an item Settings you can just find the gear icon in the list.
3. 3 Go to settings driving mode. Find an item driving mode on the menu settings by flicking it up or down. When you find it, choose driving mode.
   • After clicking on driving mode the settings for this mode will open. Please note that the current state of the mode must be indicated as "ON".
4. 4 Perform shutdown. Find the slider next to the word Status. Drag the slider from right to left to disable Driving Mode.
   • At this point, the slider should change from blue to gray and the state should switch from "ON" to "OFF".
   • By disconnecting in this way, Driving Mode will be disabled until the next time you connect a Bluetooth headset paired with your phone in Driving Mode.
5. 5 You can also disable Driving Mode for a specific device. If you want to permanently disable Driving Mode for a specific Bluetooth headset, then you need to unpair that device.
   • Click the button Add devices on the menu driving mode.
   • Find the name of the Bluetooth device you want to delete, then click the device name once. It will remain in the list, but the "Ready for Driving Mode" label under the name will disappear.
   • If you want to completely turn off Driving Mode, you will need to click on the names of all devices to unlink all Bluetooth devices from the list.

2Android

1. 1 Make sure Driving Mode is on. When Driving Mode is enabled, an icon should appear on the left side of the status bar.
   • The driving mode icon resembles a steering wheel.
   • You should be aware that Driving Mode is disabled by default unless you intentionally enable it.

Option 1: Settings Menu

1. 1 Go to Settings. On the home screen, swipe left or right until you find the icon Settings on one of the desktops. Click on it to open Settings.
   • On some devices to open the menu settings just press the menu button on your smartphone. Next, find and select Settings.
   • In any case, the icon settings looks like a gear. After opening the menu settings it should pop up on the left side of the screen.
2. 2 Locate Driving Mode. Scroll through the settings until you find the item driving mode under the Device heading. Click on it to enter the menu.
   • On some devices, opening Driving Mode requires a few extra steps.
     • Scroll to the item Language and Input. Click on it.
     • Click on the line that appears Output for text-to-speech.
     • Find an item General and click on it. The next screen should open the settings menu driving mode.
3. 3 Perform shutdown. To disable Driving Mode completely, drag the Status slider from right to left.
   • The slider should change color from green to gray, and the state should switch from "ON" to "OFF".
   • Please note that when opening the settings driving mode you will also see two separate options: Anxiety and State. You can deselect one or both of these items to disable one or both of the Driving Mode features. When you disable both features, you will also disable Driving Mode.
     • Anxiety speaks aloud unscheduled alarm information when an alarm occurs.
     • Schedule speaks aloud planned alarm information when an alarm is signaled.

Option 2: Quick Settings Screen

1. 1 open screen . Place your finger on the status bar and drag down. This will open the screen Quick settings and notifications.
   • This way you can quickly turn off the driving mode. The screen contains a limited number of items, but this method is very convenient when you do not need to switch many settings.
2. 2 Scroll through the notification panel. Find the notification bar at the top of the screen. Drag from right to left with your finger to find the desired item. Look for the button driving mode.
   • The button may be labeled "Drive Mode" or simply look like a steering wheel icon.
   • If Driving Mode is enabled, the button will be highlighted in green.
3. 3 Click on the button driving mode. Press the button once driving mode. After that, the icon should change color from green to gray, and this function will turn off.
   • When Driving Mode is disabled, a message will also appear on the screen informing you that this feature is disabled.

• Although driving mode is available on both Windows phone and Android, the function settings will be different on different platforms.
  • Driving mode on Windows automatically turns off all notifications except for messages and calls. Using the settings, you can also turn off messages and calls.
  • Driving mode on Android simply reads aloud all the alarm information that sounds when driving mode is on.

Many users use their Android devices as car navigators. Many manufacturers build this mode into their shells, and automakers add Android support to on-board computers. This, of course, a convenient feature sometimes turns into a problem - users either do not know how to disable this mode, or the phone or tablet spontaneously activates it. In today's article, we want to introduce you to ways to disable car mode in Android.

First, let's make an important remark. The car mode of the Android device is implemented in several ways: shell tools, a special Android Auto launcher, or through the Google Maps application. This mode can be switched on spontaneously for several reasons, both hardware and software. Consider all possible options.

Method 1: Android Auto

Not so long ago, Google released a special shell for using a device with a "green robot" in a car, called Android Auto. This application is launched either automatically when connected to the car's systems, or manually by the user. In the first case, this mode should also be deactivated automatically, while in the second case, you need to leave it yourself. Signing out of Android Auto is very simple - follow these steps:

Done - Android Auto should close.

Method 2: Google Maps

A kind of analogue of the Android Auto mentioned above is also available in the Google Maps application - it is called "Drive Mode". As a rule, this option does not interfere with users, but not all drivers need it. You can disable this mode like this:

Method 3: Shell Manufacturers

In its early days, Android didn't have the rich functionality it has today, so many features, like driver mode, first appeared in skins from major manufacturers like HTC and Samsung. Of course, these features are implemented in different ways, therefore, the methods for disabling them also differ.

A separate car mode, which is called "Navigator", first appeared in HTC Sense, the shell of the Taiwanese manufacturer. It is implemented specifically - it is not provided for direct control, since the Navigator is activated automatically when connected to the car's systems. Therefore, the only way to disable this way the phone works is to disconnect it from the on-board computer. If you do not use the car, but the “Navigator” mode is turned on, there is a problem, the solution of which we will discuss separately.

On the phones of the Korean giant, an alternative to the Android Auto mentioned above is available called Car Mode. The algorithm for working with this application is very similar to that for Android Auto, including the shutdown method - just press the button marked in the screenshot below to return to normal phone operation.

On phones running Android 5.1 and below, driving mode refers to hands-free mode in which the device speaks basic incoming information and is controlled by voice commands. You can disable this mode as follows:

The device is now disabled in vehicle mode.

I do not use a car, but the "Navigator" or its equivalent still turns on

A fairly common problem is the spontaneous inclusion of the automotive version of the Android device. This happens both due to software failures and due to hardware problems. Do the following:

If the above actions did not fix the problem, this is a sign of the hardware nature of its manifestation. The fact is that the phone determines the connection to the car through the contact connector, and the spontaneous activation of the “Navigator” mode or its analogues means that the necessary contacts are closed due to contamination, oxidation or failure. You can try to clean the contacts yourself (you need to do this with the device turned off and the battery disconnected if it is removable), but be prepared for the fact that you have to visit a service center.

Conclusion

We've covered ways to disable car mode from third-party apps or system shell tools, and provided a workaround for issues with this procedure. Summing up, we note that in the overwhelming majority of cases, the problem with the Navigator mode is observed on HTC devices manufactured in 2012-2014 and is of a hardware nature.