Daughter jerked her mobile phone off the table. And he was standing in the dock, the dock, I must say, fucker. In fact, just a lightning plug sticking out of the stand, like a dilda. On which you need to put the phone. All this disgrace is kept only by the strength of the connector, which is quite good for Apple. If it is not fake China, then it is an order of magnitude stronger than any micro USB. But everything has a limit. This is where the cap came to him. He bent, but I did not notice it, and with a sweeping, honed movement, planted the phone on a stake. The plug was bent and broken.
Dick would be with him, but half remained inside.
Problem…
However, how is it in the song? Most importantly, the weather in the house, everything else is shit. There is a telephone, and everything else is easy to fix with the help of a machine tool ... Something like that. I have a machine, as usual. We take and drill this chip:
At first I wanted to drill it into crumbs, and then pull it out piece by piece with tweezers. But after the first hole I came up with a better idea.
Drilling a hole
I picked up a wire of a suitable diameter, coated it with superglue and drove it into this hole.
It's no secret that many computer users treat their devices carelessly, but in vain, because often after such treatment, even the smallest devices can break down and thereby significantly complicate life. We will now consider the problem with broken plug stuck in the sound card of the computer, and we will tell you how you can fix this problem without resorting to the services of a wizard.
To begin with, I would like to talk about how this problem can appear: firstly, you can just accidentally pull the speaker or headphone wire, and pull it so that the plug simply breaks. Secondly, careless connection or disconnection of this plug, as a result of which it will also break. And finally, thirdly, there may be various force majeure circumstances, for example, the children accidentally broke or the dog gnawed or something else, there can be many reasons, but this is not more important for us, if it needs to happen, because somehow solve this problem.
It is worth noting that the problem we are considering is rather non-standard and occurs quite rarely, but this does not mean that this can be neglected. So, now we will look at four ways to solve this very strange problem:
The first method is non-standard
One of the easiest ways to remove the stuck plug from the sound card socket, is to stick it and just pull it out. A little more detail: for starters, we buy a box of matches, or we find another thin object at home that can crawl into a narrow nest. Then you need to purchase a special glue. best to buy universal superglue, which can glue any surface, including metal and wood. Important: when buying glue, it is worth remembering that it must be a gel, that is, glue-gel. Such adhesive will not spread inside the sound card slot and therefore will not damage it. After everything is ready, you can proceed directly to the procedure itself. First, disconnect the system unit from power, as well as from all wires, and put it in a well-lit place. Then take a match and grease its tip with purchased glue. As soon as this is done, immediately insert it into the sound card socket, and insert it so that the tip of the match touches the center of the broken plug. As soon as you feel that contact has occurred, keep the match in this position for several minutes. A good sign that the glue has worked is the fact that when you release the match, it will stay in the same position. When you are completely convinced that the glue has dried and securely glued the plug to the match, all you have to do is pull the match towards you, which will pull and stuck plug. Unbelievable, but true, with the help of such a very simple method, you can solve this problem.The second way is even easier.
It would seem much easier than the method that we have already described, but no, there is an even easier solution to this problem. In this method, the only thing we need is hands growing from the right place and small tweezers. After the word tweezers, everyone probably guessed what we were going to do. And strangely enough, this method is really quite simple. All you need to do is gently grab this plug with tweezers and pull it towards you, sooner or later, you will pull it out. Do not despair if nothing works out the first time, the tweezers may slip and it will be difficult to pull out at the first attempts, but be sure that after several attempts you will get the hang of it and easily achieve your goal. The only problem that may arise is where to get such small tweezers? For some, this may indeed be a problem, but if you think with your brains, then it will be solved. To begin with, it’s worth saying that you can buy tweezers in a specialized store, but if you feel sorry for spending money, then we take the phone and call our friends. Surely one of them will still find tweezers, because this is such a thing that is necessary in many fields of activity, from pharmacists and chemists to builders.The third way is extreme
The next method, which we will talk about, can be called only in one word: extreme. It is recommended to use it only if you are really confident in your skills and are not afraid to break your computer, and, of course, if you are extreme. To solve this problem in this way, you will need an electric drill, a drill and a self-tapping screw. You need to find a drill with a diameter of about 2.5 millimeters and a self-tapping screw of about the same size. With a drill and this little bit, you should make a hole in the plug, and then screw a self-tapping screw into this hole and after that, again, again, just pull this design towards you and the problem will be solved. At plug removal thus, you need to be extremely careful, because if you work carelessly, you have a high chance of getting damage to the nest itself, and these are already more serious problems. In addition, when everything is ready and the plug is removed, do not forget to perform one more step: before plugging the computer into the network, you need to remove the metal shavings from the socket. There will not be much of it, but, nevertheless, it is unacceptable for foreign objects to be there. The easiest way to get rid of the chips will be with a cotton swab - carefully clean the nest, thereby leaving no chance for foreign objects to stay there. You can also use an ordinary vacuum cleaner, sucking out all the dust and chips. If you do everything right, and everything works, then you can proudly call yourself a jack of all trades.The fourth method is the most expensive, but the most effective
This method, although it is the most expensive of all, is also the most effective and is suitable for those who still doubt that they can hold a drill in their hands or not overdo it with glue. To use this method, all we need is buy a new sound card. It's simple, isn't it?! Now there are a large number of sound cards of various price categories on the market, and which one to choose is up to you. If you don’t have a good speaker system, but have ordinary speakers, then you definitely shouldn’t chase the high cost, you can buy the simplest sound card that costs 10-15 dollars. If you want something special, then you should already look at other, more advanced models. Once you've made your purchase, all you have to do is install the card either in the PCI port on the motherboard or in the USB port. Where to install depends on which sound card you bought. Also, do not forget about the drivers that should be included, and if there are none, then you can download them from this site. After successfully installing the drivers, you can safely start using the new device and, in fact, you will simply not need the old sound card.So, we immediately considered four ways to solve a very non-standard and rather rare problem, but after reading this article, you now know what to do in a similar situation. In addition, after this article, we can conclude that it is far from always necessary to contact a computer wizard in the event of a breakdown. Sometimes some problems can be solved on your own, because in addition to saving money, you also get invaluable experience in knowing your computer.
It's no secret that many computer users treat their devices carelessly, but in vain, because often after such treatment, even the smallest devices can break down and thereby significantly complicate life. We will now consider the problem with broken plug stuck in the sound card of the computer, and we will tell you how you can fix this problem without resorting to the services of a wizard.
To begin with, I would like to talk about how this problem can appear: firstly, you can just accidentally pull the speaker or headphone wire, and pull it so that the plug simply breaks. Secondly, careless connection or disconnection of this plug, as a result of which it will also break. And finally, thirdly, there may be various force majeure circumstances, for example, the children accidentally broke or the dog gnawed or something else, there can be many reasons, but this is not more important for us, if it needs to happen, because somehow solve this problem.
It is worth noting that the problem we are considering is rather non-standard and occurs quite rarely, but this does not mean that this can be neglected. So, now we will look at four ways to solve this very strange problem:
The first method is non-standard
One of the easiest ways to remove the stuck plug from the sound card socket, is to stick it and just pull it out. A little more detail: for starters, we buy a box of matches, or we find another thin object at home that can crawl into a narrow nest. Then you need to purchase a special glue. best to buy universal superglue, which can glue any surface, including metal and wood. Important: when buying glue, it is worth remembering that it must be a gel, that is, glue-gel. Such adhesive will not spread inside the sound card slot and therefore will not damage it. After everything is ready, you can proceed directly to the procedure itself. First, disconnect the system unit from power, as well as from all wires, and put it in a well-lit place. Then take a match and grease its tip with purchased glue. As soon as this is done, immediately insert it into the sound card socket, and insert it so that the tip of the match touches the center of the broken plug. As soon as you feel that contact has occurred, keep the match in this position for several minutes. A good sign that the glue has worked is the fact that when you release the match, it will stay in the same position. When you are completely convinced that the glue has dried and securely glued the plug to the match, all you have to do is pull the match towards you, which will pull and stuck plug. Unbelievable, but true, with the help of such a very simple method, you can solve this problem.The second way is even easier.
It would seem much easier than the method that we have already described, but no, there is an even easier solution to this problem. In this method, the only thing we need is hands growing from the right place and small tweezers. After the word tweezers, everyone probably guessed what we were going to do. And strangely enough, this method is really quite simple. All you need to do is gently grab this plug with tweezers and pull it towards you, sooner or later, you will pull it out. Do not despair if nothing works out the first time, the tweezers may slip and it will be difficult to pull out at the first attempts, but be sure that after several attempts you will get the hang of it and easily achieve your goal. The only problem that may arise is where to get such small tweezers? For some, this may indeed be a problem, but if you think with your brains, then it will be solved. To begin with, it’s worth saying that you can buy tweezers in a specialized store, but if you feel sorry for spending money, then we take the phone and call our friends. Surely one of them will still find tweezers, because this is such a thing that is necessary in many fields of activity, from pharmacists and chemists to builders.The third way is extreme
The next method, which we will talk about, can be called only in one word: extreme. It is recommended to use it only if you are really confident in your skills and are not afraid to break your computer, and, of course, if you are extreme. To solve this problem in this way, you will need an electric drill, a drill and a self-tapping screw. You need to find a drill with a diameter of about 2.5 millimeters and a self-tapping screw of about the same size. With a drill and this little bit, you should make a hole in the plug, and then screw a self-tapping screw into this hole and after that, again, again, just pull this design towards you and the problem will be solved. At plug removal thus, you need to be extremely careful, because if you work carelessly, you have a high chance of getting damage to the nest itself, and these are already more serious problems. In addition, when everything is ready and the plug is removed, do not forget to perform one more step: before plugging the computer into the network, you need to remove the metal shavings from the socket. There will not be much of it, but, nevertheless, it is unacceptable for foreign objects to be there. The easiest way to get rid of the chips will be with a cotton swab - carefully clean the nest, thereby leaving no chance for foreign objects to stay there. You can also use an ordinary vacuum cleaner, sucking out all the dust and chips. If you do everything right, and everything works, then you can proudly call yourself a jack of all trades.The fourth method is the most expensive, but the most effective
This method, although it is the most expensive of all, is also the most effective and is suitable for those who still doubt that they can hold a drill in their hands or not overdo it with glue. To use this method, all we need is buy a new sound card. It's simple, isn't it?! Now there are a large number of sound cards of various price categories on the market, and which one to choose is up to you. If you don’t have a good speaker system, but have ordinary speakers, then you definitely shouldn’t chase the high cost, you can buy the simplest sound card that costs 10-15 dollars. If you want something special, then you should already look at other, more advanced models. Once you've made your purchase, all you have to do is install the card either in the PCI port on the motherboard or in the USB port. Where to install depends on which sound card you bought. Also, do not forget about the drivers that should be included, and if there are none, then you can download them from this site. After successfully installing the drivers, you can safely start using the new device and, in fact, you will simply not need the old sound card.So, we immediately considered four ways to solve a very non-standard and rather rare problem, but after reading this article, you now know what to do in a similar situation. In addition, after this article, we can conclude that it is far from always necessary to contact a computer wizard in the event of a breakdown. Sometimes some problems can be solved on your own, because in addition to saving money, you also get invaluable experience in knowing your computer.
So, you're out of luck and your headphone jack remains in your laptop's jack. And not just broke away from the wires, but broke inside. Such a nuisance can happen to anyone, especially if you take into account the race of manufacturers to reduce the cost of all kinds of audio devices. Even well-known manufacturers move production to China, and Chinese “quality” is known to everyone. The situation is unpleasant, but solvable.
A regular customer came to us with exactly the same problem. A fragment of a plug was left in the audio jack of his beloved MacBook Pro.
We googled on one of the sites a way to solve the problem on our own. In short, the method is to use a plastic tube, superglue and a screw with a diameter of about 3.5 mm (this is exactly the diameter of the audio jack). The set of tools, to be honest, is already a bit alarming. It is proposed to insert a plastic tube of a suitable size into the mini-jack with a screw fixed inside. Place a drop of superglue on the side of the screw that will touch the broken plug. Wait 5-10 minutes and remove the screw with the fragment of the plug. If it doesn't work right away, then try again.
In theory, everything sounds just great, but it’s worth saying that this is a “do not repeat at home” trick. And here's why: firstly, the screw can stick to the audio jack and, in addition to the already stuck fragment of the headphones, there will also be a screw in the mini-jack. Secondly, there is no certainty that after such an operation the audio connector will remain operational. As a result, the chance to ruin the laptop with the need to completely replace the connector (solder the old one, solder the new one) is quite large.
In this unpleasant situation, you can recommend one thing, you need to seek help from professionals. Repairing a laptop or tablet at home and using improvised means is not worth it. We will solve this problem quickly, efficiently and, of course, with a guarantee. In our service center there are tools designed to work better than a conventional screw. Also, our specialists have all the necessary qualifications, the client does not have to worry about his computer.
Naturally, more serious trouble can happen to a laptop than a stuck piece of a plug in an audio jack. No need to invent anything, just contact the service center you trust and order the repair of your electronic assistant.
P.S. And we pulled out a piece of the plug. Clickable photos below. The client is satisfied, this is the main thing for us.
UPD: We also take out from ipad and andoid tablets. Just taken out of the Nexus 7. The cost of repairing a broken plug is 250 UAH.
09.05.2010, 16:56
People who are more inventive - help!
In some incomprehensible way, the tip of the plug broke off from the headphones and remained in the socket. They tried to pull it out with needles, toothpicks, tried to glue it back (they smeared the remaining tail with a supermoment and stuck it into the nest) - nothing came of it.
What to do??? Is it possible to take to the workshop ??? and now it's the weekend.
09.05.2010, 18:00
09.05.2010, 19:52
If the chip is not solid metal, but plastic inside, with met. coated, then heat the needle, stick it deeper into the plastic (with a slight slope), wait until it cools down and pull it out!
Unfortunately metal. In order to verify this, we cracked the second plug (microphone).
09.05.2010, 20:17
09.05.2010, 22:15
Something is not very clear - the socket in which the chip is stuck is in a computer, laptop or player?
In computer. And I put in a headset-headphones for Skype.
09.05.2010, 22:17
here people share their ways of pulling out a piece of plug -> http://forum.freedom-vrn.ru/viewtopic.php?f=23&t=2488&start=0
Wow! I am glad that we are not the first to have such a setup! People have come up with many ways. Now we will look for the rod from the handle.
Thanks for the link! :flower:
09.05.2010, 22:23
09.05.2010, 23:36
If in a computer, then you can simply switch to another pair of sockets. If the socket on the front panel has died, then use the socket on the back. Or vice versa. To do this, you need to switch the cable on the motherboard and, possibly, rearrange the jumpers in the same place. If you can’t figure it out, then take a close-up picture of the area of \u200b\u200bthe motherboard to which the cable is connected and post the photo here.
We do not have sockets on the front panel :(, only on the back - 3 outputs - green, blue, pink (microphone). The plug in green has broken. Blue, as I understand it, is also an audio output, but some other one. In short, nothing works in it.
09.05.2010, 23:45
10.05.2010, 00:16
Must be! Look closely, perhaps somewhere on the side near the front panel or somewhere else. Sometimes these things hide in unexpected places...
