Software update for satellite receiver GS U210 ver. 3.8.98, LCS1 ver. 0.1.217. Download
In the new release software satellite receiver GS U210, additional functionality and improved previously available services:
Software update for satellite receiver GS U210CI ver. 3.8.98, LCS1 ver. 0.1.218. Download
The new software release of the GS U210CI satellite receiver introduces additional functionality and improves previously available services:
- Expanded the capabilities of the application "Cinema halls" Tricolor TV ";
- Fixed bugs in applications;
- Fixed problems connecting to Sony TVs via HDMI;
- Improved receiver stability.
Return previous version Software will be impossible!
Before updating, read the instructions in the archive.
Software update for satellite receiver GS B210 ver. 3.8.98, LCS1 ver. 0.1.216. Download
Software version for USB upgrade the main software of the receiver and the software of the LKS-1 module.
The new software release of the GS B210 satellite receiver introduces additional functionality and improves previously available services:
- Expanded the capabilities of the application "Cinema halls" Tricolor TV ";
- Fixed bugs in applications;
- Fixed problems connecting to Sony TVs via HDMI;
- Improved receiver stability.
It will be impossible to return the previous version of the software!
Before updating, read the instructions in the archive.
Software update for satellite receiver GS E212 ver. 3.8.98, LCS1 ver. 0.1.220. Download
Software version for USB updating of the main software of the receiver and software of the LKS-1 module.
The new software release of the GS E212 satellite receiver introduces additional functionality and improves previously available services:
- Expanded the capabilities of the application "Cinema halls" Tricolor TV ";
- Fixed bugs in applications;
- Fixed problems connecting to Sony TVs via HDMI;
- Improved receiver stability.
It will be impossible to return the previous version of the software!
Before updating, read the instructions in the archive.
Software update for satellite receiver GS B211 ver. 3.8.98, LCS1 ver. 0.1.219. Download
Software version for USB updating of the main software of the receiver and software of the LKS-1 module.
The new software release of the GS B211 satellite receiver introduces additional functionality and improves previously available services:
- Expanded the capabilities of the application "Cinema halls" Tricolor TV ";
- Fixed bugs in applications;
- Fixed problems connecting to Sony TVs via HDMI;
- Improved receiver stability.
It will be impossible to return the previous version of the software!
Before updating, read the instructions in the archive.
Software update for satellite receiver GS B212 ver. 3.8.98, LCS1 ver. 0.1.221. Download
Software version for USB updating of the main software of the receiver and software of the LKS-1 module.
The new software release of the GS B212 satellite receiver introduces additional functionality and improves previously available services:
- Expanded the capabilities of the application "Cinema halls" Tricolor TV ";
- Fixed bugs in applications;
- Fixed problems connecting to Sony TVs via HDMI;
- Improved receiver stability.
It will be impossible to return the previous version of the software!
Before updating, read the instructions in the archive.
Acer has expanded its range of monitors by announcing the XZ271Ubmijpphzx model, which is designed for use in gaming systems.
The novelty is made on the basis of a VA matrix measuring 27 inches diagonally. A WQHD curved panel with a resolution of 2560 × 1440 pixels has been applied.
The monitor has a 1ms response time and a 144Hz refresh rate. Claimed 85% coverage color space NTSC. Viewing angles horizontally and vertically reach 178 degrees.
The brightness is 250 cd/m2. Typical and dynamic contrast ratios are 3000:1 and 100,000,000:1. To connect signal sources, digital HDMI interfaces 2.0, DisplayPort v1.2 and miniDisplayPort.
Supported AMD system FreeSync, which ensures frame rate synchronization between graphics card and monitor. This improves the smoothness of the gameplay.
The panel is equipped with 7W stereo speakers and USB hub 3.0. The stand allows you to adjust the angles of inclination and rotation of the display, as well as change its height in relation to the table surface.
Implemented Blue Light Filter technology, which contributes to the reduction of intensity of blue color illumination. The Flicker Less system, in turn, eliminates flicker.
From
On Tuesday, September 18, the TV premiere of the sci-fi thriller "People" will be on the Spike TV channel. Its action takes place in a world where robots have become familiar devices designed to help people in their daily tasks. The series stars Gemma Chan (Fantastic Beasts and Where to Find Them, Doctor Who), William Hurt (Condor, Into the Wild) and Katherine Parkinson (Sherlock, Rock Wave).
The protagonist, husband and father of three, Joe Hawkins (played by actor Tom Goodman-Hill) buys a robot named Mia (actress Gemma Chan) to free his wife Laura from household chores. The android transforms the life of the whole family, but over time, it becomes difficult for the Hawkins to believe that they are in front of a robot: Mia's actions and decisions are more and more like human ones. Laura even begins to suspect that a romantic feeling is emerging between her husband and Mia.
People is an Anglo-American remake of the Swedish TV series The Real People. The authors of the new version decided to develop the storylines of individual characters and go deeper into the topic artificial intelligence and its impact on life ordinary people. Special attention The creators of the series paid attention to where the line between a man and a robot passes. For example, to create a special gesture for androids, the performer leading role Gemma Chan, along with other actors attended special classes.
The first season of the series premiered in June 2015. In the reviews, critics noted that the series is permeated with intrigue, which keeps the audience on their toes and makes them watch the thriller until the very end.
The sci-fi thriller "People" opens its season of premieres on Spike. The series airs on weekdays at 20:10 starting September 18. Following him, the channel will start new episodes of the comedy detective "Psych" (from September 20 on weekdays at 18:30) about a private detective who pretends to be a psychic, and the police drama "Shades of Blue" starring Jennifer Lopez (on air from September 24 at 21:00 on weekdays).
From
The other day, Nintendo held a Nintendo Direct, in which, it would seem, completely revealed all the details paid subscription Nintendo Switch online. It's scheduled to launch on September 19, and features include cloud saves, multiplayer access, and access to the NES Project Collection with multiplayer support. All this, however, we knew before, however, several fresh and interesting details surfaced in the FAQ.
According to the official FAQ on the UK Nintendo Switch Online page, saves stored in the cloud will be deleted if your subscription to the service expires. “Save data stored in the cloud cannot be stored outside the validity period of a Nintendo Switch Online subscription. [NES games] also use cloud saves, so this applies to them as well. However, if your data remains on the console, it can be reused when you renew your membership,” the site says.
On the page for the North American region in the FAQ, the wording is somewhat different. It is already mentioned here that for some time, your saves may still linger in the cloud after the subscription expires: “We cannot guarantee that the data saved in the cloud will remain there after a long period of time since the end of your membership . However, you can continue to use save data that is in system memory."
So far, nothing has been written in the FAQ about cloud saves on the Russian site.
As a reminder, other consoles deal with cloud saves are completely different. Sony allows you to keep them for six months after the end of your PlayStation Plus subscription, and Microsoft does not require any cloud usage fees at all, so the data is stored there forever.
In other weird subscription details, Nintendo Switch Online is a weekly online membership check, without which you won't be able to run Nintendo Entertainment System (NES) games. This, of course, is unlikely to cause problems in modern world, unless you decide to take your Nintendo Switch on a country trip where there will be no access to the Internet.
However, as a member of the Nintendo Switch Online service, you can purchase retro controllers for Nintendo Switch.
Individual membership fee (per account) Nintendo Switch Online is 279 rubles for 30 days, 559 rubles for 90 days and 1399 rubles for 365 days. However, you can share a family subscription with other Nintendo Switch users, which costs RUB 2449 for 365 days.
From
Work failures mail service"Yandex.Mail" are observed in a number of regions of the Russian Federation, follows from the data on the site downdetector.ru. Basically, users complain that they cannot access the mail, some people get an error when they try to open the site.
According to complaints, the mail web interface does not work for users from Moscow, Voronezh, St. Petersburg, Novosibirsk, Yekaterinburg, Kazan and a number of other cities.
"AT this moment some users may have difficulty accessing Mail. Lite-version of the service (https://mail.yandex.ru/lite) works in normal mode, we advise you to use the light version now.
Our employees are already working to restore the usual operation of the service as soon as possible," Yandex commented on this situation.
From
Stock Apple suppliers from Asia fell significantly in price on Monday following US President Donald Trump tweeted that the tech giant must make goods in the United States if it wants to avoid duties on Chinese imports.
Tricolor TV subscriber support specialists are most often asked a question related to the fact that there is no reception of television and radio channels, and the message "No access", "Scrambled channel", "Error "0" or "No signal" appears on the TV .
Error "0" on "Tricolor TV"
What should I do if this message appears on the TV screen?
Most often, the "0" error appears when access to viewing channels disappears. This is usually due to a glitch in the receiver's software. There can be many reasons, up to a voltage drop in the mains.
In any case, if an error "0" occurs on Tricolor TV, experts advise what to do. First of all, turn off the power to the receiver for a while. Then turn it on again. This procedure takes about five minutes. When using the module conditional access you need to take it out, and then put it back in the receiver.
Very often, instead of the error message "0", the information in the form of "DRE Encoded Channel" is displayed on the screen. At the same time, live broadcasts cannot be watched.
So what does the "0" error on Tricolor TV mean? The answer should be sought in the causes of the problems. There is universal ways to solve this problem, which are suitable for all types of receivers that are used to receive channels provided by Tricolor TV. They can be used when channels are not displayed, but the "Info channel" is working.
Bug fix "0"
If an error "0" is found on "Tricolor TV", how to fix it yourself?
First, you should check if the subscription to the package services has suddenly ended. This is done in your personal account on the official website or in the menu of the receiver itself. If the subscription has expired, then this may well cause a similar error.
It is possible that the access card is not installed correctly in the receiver, so you need to check that it is installed correctly in the appropriate slot in the receiver. If a conditional access module is used instead of a card, then the check should be carried out in it.
If the card is inserted correctly, when you press on the remote control remote control No. ID button, a message will be displayed on the TV screen displaying its number.
Also, if an error occurs, it will not be superfluous to try resetting the receiver to factory settings. In other words, nullify them.
This operation is quite possible to do on your own. You need to enter the receiver's menu and go to the "Settings" section. You will need to enter four-digit code- dial four zeros 0000. After that, you need to find "Factory settings" and select the line "Delete settings", along with the list of channels. There is nothing dangerous in this operation, after rebooting the receiver using auto search, channels can be found again. Most of the time the error disappears after that.
If the subscription is over, and if the channels from the "Single" package are not accepted, it is possible to search free channels. They are usually at the very end of the list.
When the receiver is turned off long time, there may also be a problem with the "0" error as soon as the receiver is turned on. How to fix the error "0" on "Tricolor TV"?
You should not turn off the receiver, but leave it on for eight hours, wait until the error disappears. Most often this happens much earlier, in an hour and a half. But this is only if both the antenna and the receiver are in good condition.
Other reasons for the error
If an error "0" appeared on "Tricolor TV", what to do if the cause of the error "0" turned out to be poor quality or low level the received signal from the satellite? Or lack of activation keys. In this case, if you simply leave the receiver on long term turned on, it won't help.
You can either send a request to the support service, or try to fix the antenna yourself.
It must be remembered that when the receiver is expected to be activated, it must be turned on on the first channel - that is, on 1ORT, and no other. Regardless of whether there is a broadcast on it or not.
If the conditional access module is malfunctioning, this error may also appear. To determine the version of the installed software on the receiver, press on the remote control to enter the "Status" menu section. You can restore the software yourself, while repairs are best left to a specialized service center.
In most cases, error "0" also appears when the satellite receiver is overloaded.
How to fix the problem
Having dealt with the question of what error "0" is on Tricolor TV, we perform several actions to eliminate it ourselves:
- Wait a while (usually 8-10 minutes) and the channel will most likely start broadcasting on its own.
- Reboot the receiver by turning it off for 3-5 minutes and then turning it on again.
So in what situations does this error most often appear.
TV shows "No Signal" message
First, you first need to try to determine who issued this message - a TV or a receiver. You should click on remote control on the OK button "- with a favorable outcome, the channels of "Tricolor TV" should appear on the screen. Otherwise, an inscription will appear that the list of channels is empty (which means the error "0" on "Tricolor TV").
If the receiver responds normally to pressing the button, then the cause of the error may be hidden:
- If a small diameter is used (from 50 to 60 cm) or it is installed poorly and incorrectly configured, then the signal may be absent due to the manifestation of precipitation. It can be rain, snow, even dense clouds.
- Antenna alignment may be off. For example, due to strong winds or a blizzard. You either have to fix the setting yourself. satellite dish or call a specialist.
How to set up the antenna yourself
In principle, there is nothing complicated in setting up. You just need to change the position of the antenna and follow the TV screen. Move the antenna should be gradually, slowly, literally centimeter. As soon as an image appears on the "Info" channel, the antenna must be fixed.
If you call a special scale showing the signal strength by pressing the red button "F1" or "i" twice on the remote control, the signal strength will be on the left of the screen, and its quality on the right. In order for channels to be received stably, it is necessary that the signal level be at least 70%.
There is such a situation when some channels are not displayed, a message appears stating that there is no signal, while others are displayed normally. The reason for this may be that the transponders have changed - the frequencies on which the channels are broadcast. You need to rescan them either in manual or automatic search mode.
You will have to enter the menu and select the item "Search for Tricolor TV channels." Then scan the channels.
An error may also occur if the antenna fails. Then you have to replace the converter itself.
When the reason is that it's damaged coaxial cable then the cable needs to be replaced. You can repair it, but the signal quality may be worse. The cable junction may cause additional interference in channel reception.
The receiver does not respond when the "OK" button is pressed
- If a GS 8306 receiver is used, the outputs of the receiver itself will often randomly move. The fact is that on the remote control in its upper left part there is a button, inadvertent pressing of which leads to a change in outputs, the image disappears. You can check which output is currently active by looking at the indicator visually. RCA - bells are shown, HDMI - the indicator glows in its lower part.
- It is possible that the cause of the error is the television receiver itself. It is necessary to check if the accidentally switched input is not connected incorrectly. You need to find the "Resources" button on the remote control and press so that the output matches the selected mode - Scart, HDMI or RCA.
If on the screen television receiver one of such inscriptions appears as "Encoded channel DRE", "No access", "Error "0", then we check the following:
"TV Tricolor" subscription activity. The "0" error on the second receiver is also checked either through your personal account on the official website, or in the " Personal Area"receiver.
Service subscription active
- You should make sure that the receiver detects the Tricolor smart card.
- Whether it determines the ID number of the satellite receiver.
Receiver menu item "Status"
If there is no ID number, then:
- If you use a receiver that uses a smart card to receive channels - models GS 8306, GS 9303, GS 8302, GS 8304, GS 8300N, after disconnecting the receiver from the network, remove the card, make sure that it is installed correctly, insert it back and turn on the receiver to the power supply.
- If the receiver works without a card, and these are receivers using MPEG2 - GS 8300, GS 8300M, most likely the access module is broken. Will have to contact service center where the module will be repaired.
In a situation where the ID number is defined and the subscription has not ended, then:
- It is necessary to reset the settings to the factory settings, reboot the receiver, after which the setup wizard will be activated and the channels will be scanned again.
- If the receiver has not been turned on for more than three days, you will have to get activation keys again. To do this, having overloaded the receiver, it should be turned on on the "Info channel" channel, and if it shows, then go to the "Film screening" channel - after which the channels usually decode themselves.
So that the "0" error does not appear on Tricolor TV in the future, what should I do if the receiver turns off after all, when leaving for a long time, for example? You will have to reactivate the keys.
To prevent the error message from appearing in the future, you should sometimes leave the receiver plugged in, for example overnight.
ATTENTION!
Do not turn off the power of the receiver until the end of the update procedure! Otherwise, the receiver may be damaged!
It will be impossible to return the previous version of the software!
Software update via USB-drive (flash drive)
If your receiver is not connected to satellite dish, you can update the software via a USB flash drive. Before downloading the software to a USB flash drive, it must be formatted in FAT32. In the downloaded files you will also find detailed instructions by installation.
Software update via satellite step by step
To update software via satellite, the receiver must be connected to a tuned satellite dish.
The software update consists of two components: the receiver's main software update and the module software update.
PROCEDURE:
1.Turn off and on the receiver by power.
2. Switch the receiver to information channel 333.
3. After a few seconds, a message will appear on the screen asking you to update the software as follows:
4. When appearing this message Confirm the start of the update by selecting the "OK" option.
After agreeing to the update, the receiver will switch to the bootloader mode, and service messages about the software update process will appear on the screen. The message type is shown below:
5. Upon completion of the update, the receiver will reboot and turn on in the channel viewing mode.
6. To continue the update, you must turn on the receiver again on channel number 333 in the general list. Within one minute, a message will appear on the screen about the need to update the module software of the following form:
7. When this message appears, confirm the start of the update by selecting "OK"
The receiver software update takes about ten minutes, the module software update takes about two minutes.
Upon completion of the module software update, the receiver will reboot and turn on with new version ON.
After the software update is completed, go to the "My Account" menu section and make sure that the receiver software version has changed to 3.8.98 , and the software version of the module to one of the following, depending on the model of the receiving equipment:
Module software version - 0.1.218
Module software version - 0.1.217
Module software version - 0.1.216
Module software version - 0.1.220
Module software version - 0.1.221
Module software version - 0.1.219
This completes the update of the receiver and module software, and the receiver is ready for further work.
GS U210, GS U210CI, GS E212, GS B210, GS B211, GS B212 receiver software update video tutorial
How to update the list of Tricolor channels on the receiver GS U210, GS U210CI, GS E212, GS B210, GS B211, GS B212
To find new channels, do the following:
Why do you need to update the channel list?
You may need to update the channel list in several cases:
1. To find new Tricolor TV channels that are not on your receiver
2. After preventive work on satellite
3. When initial setup equipment
4. When changing the broadcasting parameters (changing frequencies) of some channels
5. Prophylactically twice a year
