The other day on our resource was published a detailed how to jailbreak iOS 9.3.3 without a computer, using a mobile browser and without entering Apple ID details. After a while, the method stopped working, since. However, hackers were able to revise the instructions and make them relevant to the jailbreak community again. The updated "manual" is available for viewing below!
Attention!
- Before jailbreak, you need to back up the data on your device via iCloud or iTunes.
- It is preferable to jailbreak on iOS 9.3.3 as it fixes many bugs and improves security.
- Supported devices: iPhone 5s, iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPhone SE, iPod Touch 6G, iPad mini 2, iPad mini 3, iPad mini 4, iPad Air, iPad Air 2, iPad Pro.
How to jailbreak iOS 9.2 - iOS 9.3.3 from a browser without a computer?
Step 1: Open this article from Safari browser from your iOS device.
Step 2: Navigate from your mobile device to this link .
Step 3: Click on the Install button on the left of the page.
Step 5: The PP app will start downloading to your device. Open Control Center and watch the app download closely. Once the status changes from Loading to Installing, enable Airplane Mode for successful installation. Once the installation is complete, you can turn off Airplane Mode.
Step 6: After successfully downloading the application to the device, you need to go to Settings - General - Device Management. Please select Beijing Hong Yuan Online Technology and click trust twice.
Step 7: Now go back to the home screen and launch the PP app. We agree with the OK button to send notifications. Remove the bird opposite the PP at the bottom and click on the circle.
Step 8: After that, lock your device, wait 6 seconds, you will receive a notification about the successful completion of the jailbreak.
Step 9: Now unlock our device, launch the PP application again. You will see a circle with a loading animation. Once completed, the device will restart and Cydia will appear. Launch Cydia. Ready!
Please note that the jailbreak is semi-tethered, that is, after each device reboot, you will need to launch the PP application and click on the circle.
After half a year of promises, Chinese hackers still released a jailbreak for iOS 9.3.3. But it has some drawbacks. About them and that how to jailbreak iOS 9.3.3 I will describe in detail in this post.
The great thing about this jailbreak is that you need to activate it after every restart of your iPhone and iPad. But for this you absolutely do not need to connect the device to the computer every time. You just need to launch the application on the device and tap it a couple of times.
Another disadvantage of this jailbreak its compatibility only with devices running on 64-bit processors, namely:
- iPhone 5s, 6, 6 Plus, 6s, 6s Plus and iPhone SE.
- iPad Air, Air 2, mini 2/3/4 and iPad Pro.
- iPod touch 6.
For devices with a 32-bit processor, there is NO jailbreak and will not be(), here they are:
- iPhone 4s, iPhone 5, iPhone 5c,
- iPad 2, iPad mini first generation, and
- iPod touch 5G.
What about firmwares that can be cracked with this utility are:
- iOS 9.2 and 9.2.1
- iOS 9.3, 9.3.1, 9.3.2 and 9.3.3
How to jailbreak iOS 9.3.3 from Windows computer
As usual, before jailbreak, I kindly ask you to back up your data using iTunes.
Step 1: Download the program from the official website: pro.25pp.com
Step 2: Run the program as administrator.
Step 3: Click on the button indicated by the arrow in the screenshot below.
Step 4: Wait until the new program is installed, it is called PP Helper, after installation, an icon should appear on the desktop. Also run it as administrator.
Step 5: Be sure to turn off Find My iPhone and password / fingerprint protection on your device, then turn on Airplane Mode. The functions are in Settings -> iCloud -> Find iPhone and Settings → Touch ID & Password.
Step 6: Now you can connect your device to your computer and wait until the program recognizes it.
Step 7: Then such a page should open, press the green button on it. After that, the utility will start installing the jailbreak on iOS 9.3.3.
Step 8: After a while, a window will appear in which you need to enter your Apple ID and password from it and click on the green button.
Step 9: Now you need to wait until a new PP icon appears on your mobile device. After her appearance, go to Settings → General → Profiles... Choose a new profile and click " Trust»
Step 10: Now it's time to open the PP-chtotam app, which is located on the desktop of your mobile device.
Step 11: Click on the Chinese characters in the circle and lock your iPhone or iPad by pressing the Power button.
Step 12: Wait until a push notification appears on the lock screen. Then unlock your device and launch the PP app again.
Wait until your iPhone or iPad reboots, after which Cydia will appear on your desktop.
Possible errors after installing the jailbreak
Unfortunately, at the moment, most users are faced with certain errors after installing the jailbreak. There is a way to deal with some of them.
What to do if Cydia crashes after jailbreak iOS 9.3.3
For problems with Cydia, you need to:
Step 1. Launch the PP-chtot app on the device and allow it to send notifications.
Step 3. Click on the Chinese characters in the circle and lock your iPhone or iPad by pressing the "Power" button.
Step 4. Wait until a push notification appears on the lock screen. After which the device should automatically reboot.
After these steps Cydia will stop crashing on startup.
We offered a solution to jailbreak iPhone and iPad without using a computer. However, users do not need to provide their Apple ID credentials.
Before jailbreaking iOS 9.3.3 and earlier, including iOS 9.2, you should back up your data to iCloud or iTunes. The jailbreak tool supports iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus iPhone SE, iPad Pro, iPad mini 2, iPad mini 3, iPad mini 4, iPad Air, iPad Air 2, and iPod touch 6G.
How to jailbreak iOS 9.3.3 without a computer
Step 1: On your iPhone or iPad, open this article in Safari.
Step 2: Click this link to install PP app required to jailbreak.
Step 3: In the window that appears, click the "Install" button.
Step 4: The PP application on the desktop starts downloading. Open Control Center and follow the installation progress closely by looking at the icon. As then the phrase "Loading" will change to "Installation", at this moment activate the Airplane mode.
Step 5: After the installation is complete, disable Airplane Mode.
Step 6: Now go to Settings -> General -> Device Management.
Step 7: Select the AKRAM AL NEAMI BUILDING MATERIALS certificate and click the "Trust AKGRAM AL NEAMI BUILDING MATERIALS TRADING CO" button. Click the "Trust" button.
Step 8: Go back to home screen and launch PP app. When prompted to send a push notification, click OK.
Remove the PP bird at the bottom and click on the circle.
Step 9: Lock the screen of the device and wait 6 seconds. You will receive a notification that the jailbreak was successfully completed.
Step 10: Unlock iPhone or iPad. Open PP again. You see an animation in a circle indicating the preparation of the Cydia installation. Wait until your gadget is restarted.
Launch Cydia from your home screen and wait for the app to prepare.
It is important to understand that we are talking about tethered jailbreak, so you need to put your iOS device in jailbreak mode after each reboot. Do not uninstall PP app from your device. You will have to reopen it and click on the circle in case of reboot.
And it is supported on all 32-bit devices with this version of iOS. The jailbreak does not work on 64-bit devices, since it uses an exploit that is present only on 32-bit devices.
Installing Phoenix jailbreak is pretty easy. You need to download the application to your device using the Cydia Impactor program, then open it and start the process. Like the Yalu app, the Phoenix jailbreak is semi-tethered, which means that every time you restart your device, you'll have to re-launch the Phoenix jailbreak.
In this tutorial, we'll show you how to jailbreak iOS 9.3.5 on 32-bit devices using Phoenix.
Before you start, be sure to read the following important information:
- This jailbreak is only supported by 32-bit devices, which include:
- iPhone 5
- iPhone 5c
- iPhone 4s
- iPod touch 5
- iPad 2
- iPad 3
- iPad 4
- iPad mini 1
- 64-bit devices do not support Phoenix jailbreak.
- The jailbreak is semi-tethered. When you reboot your device, the jailbreak will turn off and you will have to reinstall it via the app.
- The jailbreak may not be installed the first time. If you get errors during installation, start over until the jailbreak is installed.
How to jailbreakPhoenix foriOS9.3.5 on 32-bit devices
Step 1: Download the Phoenix IPA file and Cydia Impactor to your computer.
Step 2: Connect your iPhone, iPad or iPod touch to your computer, then open Cydia Impactor.
Step 3: Drag the Phoenix IPA file into Cydia Impactor as shown in the screenshot.
Step 4: You will need to enter your Apple ID and password. This information will only be shared with Apple in order to register the IPA file. Enter your Apple ID and password so Cydia Impactor can begin the app installation process.
Step 5: When the application is installed, an icon named "Phoenix" will appear on the main screen. Before opening it, go to Settings> General> Profiles (also called Device Management or Profiles and Device Management).
Step 6: Open your Apple ID profile and click the "Trust" button.
Step 7: Now go back to your home screen and launch the Phoenix app.
Step 8: To start installing the jailbreak, click the button Prepare for Jailbreak.
The jailbreak installation process will begin. Do not touch your device until the installation is successful. When this happens, the device will reboot and the Cydia icon will appear on the home screen. If an error occurs, restart the installation until it works. As stated on the site, errors can occur with the exploit, so you may need to make several attempts.
You now have jailbreak installed on your iOS 9.3.5 device and can install various tweaks by opening the Cydia app. When you open Cydia for the first time, it will take a little time for the app to complete the installation. When the installation is over, you can start using it, but remember that you can only download those tweaks that are compatible with your device.
How does semi-tethered jailbreak work?
Phoenix is a semi-tethered jailbreak. This means that when you reboot your device, it will crash. You won't be able to use installed tweaks, and Cydia will crash on startup. To re-install the jailbreak, simply open the Phoenix app and run the installation. The jailbreak will be installed on the device again.
When the application expiresPhoenix and how to reinstall it?
If you install the Phoenix app with your free Apple ID, it will expire in 7 days. You will have to reinstall it via Cydia Impactor to renew it for another 7 days. This is done in the same steps as above. Please note that the Phoenix app is only needed to install the jailbreak, so even when the time expires, the jailbreak will continue to work. But you have to download the app if you want to re-install the jailbreak on your device.
After months of waiting, Pangu has finally released a new one. Next, we'll show you how to jailbreak iOS 9.2 - iOS 9.3.3 on your iPhone, iPad or iPod Touch using the Pangu tool.
Before starting the jailbreak process, please read the following notes:
- Pangu supports 64-bit devices such as:
- iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone SE
- iPad Air 2, iPad Air, iPad mini 4, iPad mini 3, iPad mini 2, iPad Pro
- iPod Touch 6G
- Pangu Jailbreak works on iOS 9.2, iOS 9.2.1, iOS 9.3, iOS 9.3.1, 9.3.2, and iOS 9.3.3.
- Pangu is a free jailbreak tool.
- The Pangu jailbreak is tethered and requires a new launch every time the device is rebooted.
- To use Pangu Jailbreak, you need a Windows PC.
- Make sure to take a full backup of your device using iTunes or iCloud so that you can restore your device in case something goes wrong.
How to Jailbreak iPhone, iPad and iPod Touch on iOS 9.2 - iOS 9.3.3 Using Pangu Jailbreak
Instructions on how to jailbreak iPhone, iPad and iPod Touch on iOS 9.2 - iOS 9.3.3 using Pangu Jailbreak.
Step 1: To jailbreak Pangu, you need to use 25PP.
Download 25PP:
Step 2: After you have downloaded 25PP, double click on the icon to open the installer and begin installation.
Step 3: Connect your iPhone, iPad or iPod Touch to your computer with a USB cable and launch 25PP.
Step 4: If your device is running iOS 9.2 - iOS 9.3.3, a big green button will appear in the Pangu Jailbreak window. Make sure your device is connected to the internet.
If you are prompted to enter a code (captcha) during installation, enter it to continue. You will also need to enter your Apple ID and password (this is required to create a developer profile on the device).
Step 5: After the installation is complete, you will see the PP app on the home screen of your device. Go to section Settings -> General -> Profiles and controls. arrange ... and open the Pangu developer profile or the one with the Apple ID entered in step 4. Click on the “Trust” button.
Step 6: Launch PP Jailbreak app and agree to receive notifications.
Step 7: Click on the round button in the center. Also, before installing, you can uncheck the box at the bottom so as not to install PP Assistant.
Step 8: Lock your device. The jailbreak process will start. You will receive push notifications on the lock screen. If the notification “Storage Almost Full” appears, just skip it.
Step 9: During jailbreak, do not disable the device lock. After the procedure is completed, the device will automatically reboot. If you see Cydia on your home screen, it means that the jailbreak process has been completed successfully.
When you start Cydia for the first time, it will take some time to “Prepare the file system”. After the preparation is complete, the application will close and reboot.
Every time you reboot your device, you will have to re-launch the PP app to re-jailbreak. Therefore, do not uninstall this application, otherwise you will not be able to jailbreak after reboot.
Error correction
If you get an error when entering your Apple ID and password, try disabling Find My iPhone and Apple ID 2-Step. Or create a new Apple ID account.
Do you get this error while jailbreaking iOS 9.2 - iOS 9.3.3?
Pangu claims that Apple has made a couple of fixes to their front-end. Now these fixes prevent users from successfully installing PP app.
However, the team has already found a workaround and is working on an update that will fix the installation error.
Write in the comments if you managed to jailbreak?
Don't forget to join our group
