Let's start with a common computer literacy question: "What is a touchpad on a laptop?" Laptops, netbooks and other similar portable devices (for example,) usually have a built-in computer mouse. This built-in mouse is nothing like the usual computer mouse that you can move around the table and press the buttons.
The built-in mouse in portable portable computers has a completely different device. If an ordinary mouse moves on the table, then the built-in mouse of portable computers stands, as they say, tightly. But you can move along it with your fingers, which is completely similar in response to the movement of an ordinary computer mouse on the table.
Pros of a touchpad or what is a touchpad for?
Such a fixed device of the built-in mouse is convenient for portable computers, where you need to have as few moving parts as possible. Precisely because the computer itself is portable, it is not desirable to have something else moving in it.
With this built-in mouse, you can not only move your finger, but also perform many other actions. For example, you can tap on the built-in mouse, which will be similar to pressing the left button of a conventional computer mouse. In more advanced computers, especially Apple's Macs, the built-in mouse allows you to rotate the image, zoom in or out, and perform many other convenient actions with the movements of a few fingers.
Also, the built-in mice of portable computers have left and right buttons, completely similar to the left and right buttons of a conventional computer mouse.
Since actions on the built-in computer mouse of portable portable devices are most often performed by touching the fingers on a rectangular area on the computer case, this mouse got its name "touchpad" from the English words "touch" - touch and "pad" - pad. That is, in plain language
"touchpad" means "to touch a special area with your fingers."
And speaking in technical language, then
"touchpad" means "touchpad".
Cons of the touchpad or how the touchpad interferes with the user
Any convenience can always have a downside - inconvenience. This "law of harmfulness" did not bypass the touchpad, touchpad, built-in mouse of portable computers. The fact is that usually this touch panel is structurally located just below the computer keyboard (laptop, netbook, tablet computer, etc.). When working with the keyboard, you can accidentally touch the touchpad, the same panel (platform) located below the keyboard, imperceptibly for yourself.
The touchpad can perceive any touch not only with a finger, but also, for example, with a shirt cuff, as a signal for action. On this false signal, a signal will go to the computer from the touchpad, for example, to move the mouse cursor up, down, left or right.
And now imagine, for example, that you are typing text. And suddenly, at some point, the mouse cursor “moves out” to a completely different place in the text, where you continue, without suspecting anything, typing the text further. Not everyone knows the method, so when typing, all attention is usually directed not to the screen, but to the keyboard. And you just don't notice that the cursor has "moved out" for a long time, and the test is printed completely in the wrong place where it should be.
Unpleasant? Still would. And then you need to edit everything, look for where the text “left”. Extract it from there, move it to where this text belongs. It takes a long time and sometimes tedious to fix everything.
Therefore, developers of portable portable computers have long attended to the problem of temporarily turning off the touchpad, touchpad, and built-in mouse. Unless, of course, the user needs it. This switch off (and, of course, on if the touchpad is needed again) is quite handy. Therefore, it is always useful to know and be able to use this function.
Conclusions and main question:
The touchpad is similar to a computer mouse. The appearance of such a touch panel is due to the peculiarity of portable computers.
At home, where a laptop can be placed on a table, many people prefer to use a regular computer mouse. Only in this case, the included touchpad can greatly interfere, so the question arises: how to disable / enable the touchpad?
Manufacturers have worried about the function of turning off the touchpad: laptops have a special key or a key combination. You do not need to resort to any special technical or software tools.
1 option how to enable the touchpad on a laptop or disable it
Modern laptop models have a small indentation in the corner of the touchpad. This is the touchpad enable/disable button. By pressing it twice, you will activate the touchpad or disable it if it was enabled.
This is very convenient, although this button is not provided in all models of portable portable computers.
Option 2, how to enable or disable the touchpad on a laptop
In other laptops, to enable / disable the touchpad, you need to press the key combination Fn and one of the top row F1-F12. The Fn key is usually located in the lower left corner of the keyboard. Which of the F1-F12 keys to press can be judged by the icons applied to them, which are made in the same color as the Fn key.
For a Sony Vaio laptop, you can disable / enable the touchpad using the Fn + F1 keys. Pressed the two keys Fn + F1 once and thereby disabled the touchpad. Pressing Fn+F1 again will turn the touchpad back on.
Rice. 1 For a Sony Vaio laptop, you can disable/enable the touchpad using the Fn+F1 keys.
The icon for turning on / off the touch panel usually looks like this touch panel - a rectangle with rounded corners (an image of a "platform"), under which two small rectangles are shown (like buttons, left and right mouse buttons) and above all this there is a cross, like the letter "x" means "turn off". But there may be other mnemonic pictures of the touchpad, here computer manufacturers are trying their best.
Option 3, how to enable / disable the touchpad on a laptop
If for some reason the described methods cannot enable or disable the touchpad with a special button or using , then this can be done through the BIOS settings. To access these settings, you need to hold down the F2 or Del key while starting the laptop. As a rule, when turned on, a hint is displayed at the bottom of the screen which key to press. It must be remembered that this hint appears for a very short time. And you need to press this key exactly at the moment when the hint is displayed. Otherwise, it will be impossible to enter the BIOS setup program, you will need to restart the laptop.
In the BIOS settings we find the item Pointing Device (literally "pointing devices"). Change its value to Enabled (literal translation "Enabled") if you want to enable the touchpad, or to Disabled (literal translation "Off") - to disable the device. Then exit with saving (usually this BIOS setup menu item looks like "Save & Exit" or "Exit with Saving") for the changes to take effect.
Remember, you need to be more careful with BIOS settings, especially if you don’t know what this or that setting is for. You can even damage your computer to such an extent that it cannot be repaired, this is how this BIOS is “insidious”.
Option 4, how to enable / disable the touchpad on a laptop
Another way to find information on how to disable / enable the touchpad on a laptop. To do this, you can use the instructions for your laptop, which recently, as a rule, not in paper, but in electronic form, is located on the hard drive C: of the laptop, as a rule, in the “Documentation” folder, but not necessarily in it.
When All 4 Options Don't Work
So, the touchpad is easy to turn on and off. But if the touchpad cannot be turned on by the methods described, then it is likely that
- the device is faulty,
- or not installed, for example, as a result of reinstalling the operating system (I wanted, say, instead of the “native” XP (that is, “wired” by the manufacturer into the device at the time of its sale), install the seven, or instead of the “native” seven - the eight or ten!). .
Instruction
Well, the most radical way is to apply a strip of wide adhesive tape on the touch panel, but this is only worth it in cases where other methods have not brought an effect.
Related videos
However, in some cases the touchpad is inconvenient, and sometimes you even want to turn it off. Especially often the desire arises when entering text with a blind ten-finger method, because in this case touches with the palms often occur, which is interpreted by the system as mouse movement and can lead to an undesirable and unexpected reaction for the user of the programs with which he works. You don't need a touchpad when you connect a mouse, which is still much more convenient to work with.
There are several different ways to disable the touchpad, some of which are model dependent.
- A number of models have the ability to disable the touchpad using a special button located near it. Sometimes it is activated using the functional Fn. Just disable the touchpad while texting or when you don't need it.
- Open the touchpad settings window. You can do this through by selecting the "Mouse" section or a special section created by the touchpad driver (if one appeared in the Control Panel after installing the driver). As a rule, there is a "Stop device" button here, which allows you to simply turn off the touchpad. However, a more flexible option for disconnecting and connecting the touchpad is provided by the "Disconnect when connecting an external USB mouse" checkbox. In this case, the touchpad will be inactive when the mouse is present, and after removing it from the USB port, it will work again without the need to turn it on separately.
- The most flexible way to disable the touchpad when no external mouse is available is based on a simple observation: when the user is typing (and there is a risk of the touchpad being triggered, causing the desire to disable the touchpad), they are usually not using the touchpad or the mouse at the same time. This is exactly what Google's TouchFreeze utility uses in its work: it simply turns off the touchpad while typing, and turns it back on when you stop using it. You can download the utility from the official website: http://code.google.com/p/touchfreeze/
Related videos
When using a laptop, you can use the analogue of a standard computer mouse - the touchpad (Touch Pad). This is a device located just below the keyboard, which can completely replace a computer mouse. The advantages of this device include quiet operation of the keys and a compact size. By cons - inconvenience in navigation, especially in computer games or graphic editors.
You will need
- System and software disable the touchpad.
Instruction
Regardless of which one you have: Asus, HP, Acer, Samsung, Lenovo, the shutdown occurs in the same way. It is important to understand only the essence of how the shutdown is performed and in the future you can easily turn off the touch pad on any, regardless of the company, model and year of assembly. For most laptop users, using a mouse is much more convenient than using a touchpad. In addition, the touchpad sometimes even gets in the way and can delete, modify or otherwise corrupt the owner's important documents. Most often, the user may accidentally touch the panel with the hand while typing. But even those who often use the touchpads can confirm one more minus: during active work, something like scuffs, visually ugly spots that look like greasy spots are formed.
Most laptop manufacturers use Synaptics touchpads. This company has been producing touch panels for several years now. With the help of application software, you can edit the parameters that were originally included in the touchpad operation device (device sensitivity, click speed, scrolling, etc.). The latest versions of these touchpads allow you to lock your laptop. Only the person who has locked it can unlock the laptop, using fingerprint technology.
To disable the touchpad in your laptop, you need to go to the properties of the touchpad or refer to the Synaptics Pointing Device Driver program, which is responsible for the operation of the touchpad. The program allows you to turn off the device until the next system boot or completely.
To access the touchpad capabilities, click on the "Start" menu, select "Control Panel", then select "Mouse". In the Mouse Properties window that opens, select the Device Settings tab. Find the device name and turn it off.
The touchpad can be disabled using hotkeys on . Hold down the Fn function key and the key that shows a hand touching the touchpad at the same time. To enable the touchpad, do the same. For Asus laptops, the additional keys will be F7 or F9. To disable the touchpad on Acer, press Fn+F5. Lenovo has additional keys - F5 or F8. Samsung uses an additional F5 or F6 key to disable the touchpad.
Some laptops are equipped with a special button, located next to the touchpad, which allows one easy movement to turn off the panel, and if necessary, quickly turn it on without any difficulty. You can find out if there is such a key on your device by referring to the instruction manual for your laptop. The info section will provide all the keys that interact with the panel.
Some touchpads do not have a button to turn it off. But on the other hand, they have a whole area on the touch panel, when touched twice, the panel automatically turns off. The presence of such a site has a significant drawback: it is possible to uncontrollably press on the forbidden area and, accordingly, accidentally turn off the touch panel when there was no need for it.
Shut down the operating system on the laptop in the correct way and wait for it to turn off automatically. Turn off power to the computer and all peripherals connected to it. Remove the battery. Use a screwdriver to pry off the bezel covering the additional keyboard board. Carefully unfasten the latches and remove this bezel.
See if there is a laptop power button on the same board with additional keys. Even if this turns out to be the case, see if any separate cable is used to connect this button. If there is such a cable, disconnect from the computer motherboard one of the cables that belongs to the auxiliary keys, and leave the one that goes to the power button in place. In the event that the cable for the auxiliary keys is the same, you cannot turn it off, and to block the latter, you will have to use a hard overlay. It must be thin enough, otherwise, when closing the laptop, it can crush the screen.
Place the connector disconnected from the motherboard in such a way that it does not interfere with putting on the false panel. If there are protruding contacts on it, isolate them from the board with a thin film. Install the bezel in place. Carefully fix it with all the latches.
It remains only to connect the battery to the laptop. Supply power to it, as well as to all peripheral devices. Click on the power button - if everything is done correctly, it should start. Wait for the OS to load and make sure that the additional buttons do not work. Install the multimedia kiosk software and configure it so that when the program is running, it is impossible to launch any other applications using any key combinations.
If it becomes necessary to use the laptop again outside of the multimedia kiosk, do all of the above again, but instead of disconnecting the auxiliary keypad connector, plug it in.
Helpful advice
For those who do not quite understand what a laptop touchpad is, we will tell you. The touchpad is a wonderful touch device that is designed specifically for laptops. Oddly enough, sometimes disabling the touchpad on a laptop is easier than enabling it. Depending on the laptop model, the touch pad may be disabled in different ways.
Related article
Touch panel or as it is also called touch mouse- a great invention, but for modern conditions, this device moves to the background, because. today, almost every laptop is equipped with a separate and small usb- mouse Yu.
Instruction
Surely many laptop users have noticed how often sometimes, i.e. panel, spoils the mood and significantly increases the time spent on work. For example, when typing a lot of text, the thumb of both hands is above the space bar. But next to the space is and , when pressed, the cursor moves to another part of the document. If you take your eyes off the keyboard infrequently, you will see that some of the text has jumped.
Some users, when buying, view the work of individual programs, then remove or disable unnecessary ones (in their opinion). Most touchpads today are manufactured by Synaptics. The devices of this company can only be deleted when the program is installed, but since. a competent user got rid of it, therefore, it is not in his power to perform this operation.
If this program was not on, it is recommended to refer to the original source, i.e. visit the manufacturer's web page and in the Download section look for anything related to Synaptics. You can also disable it by pressing the Fn + F7 key combination. Some laptop models have specific prompts in the form of patterns on the buttons. The touchpad disable button, as a rule, is located on the F7 key - a rectangular panel and an outstretched index finger are drawn on it.
In some cases, the touchpad can be disabled through the Device Manager applet, which can be called through the context menu of My Computer. You need to find the touch device, call its context menu and select the "Disable" command.
Related videos
Some modern models of laptops, netbooks and computers are equipped with an additional feature that allows you to use the device monitor as a touch control panel.
You will need
- - your touch device.
Instruction
Examine your keyboard carefully for special control buttons. screen monitor. Pay special attention to the multimedia keyboard - sometimes the key with the desired command is located there. Press it and deactivate the touch screen, turning it into a normal state if you need it. Also look at the touchpad touchpad with buttons if your laptop model has one.
Read the instructions for your device for special combinations. Usually they use the system keys: Ctrl, Fn, Alt, Shift, and so on. If you have an Fn key, look on the top numeric keypad for a button with an icon to disable the touch screen, F1, F2, F5, and so on are also commonly used.
Go into the BIOS of your computer. To do this, when loading it, press the special button that is responsible for entering this menu. It can be Delete, F8, F1, F2, Fn+F1 and so on, combinations may vary depending on the model. Also pay attention to the boot screen when you turn it on, there should be a line “Press ... to enter setup”, instead of dots, the desired combination will be written.
Find the control of your monitor in the BIOS and disable the touch control using the specially assigned keys listed in the menu below. They may vary depending on the device model. Exit the BIOS program after saving the changes.
Start your computer and see if the touch screen turns off. If it does not help, carefully read the instructions. Going in the box, or view the information you are interested in on the official website of the computer manufacturer by searching for your model, you can also find out from the seller of your computer when buying.
note
The touch screen disable feature is not available on all models.
A list of some parameters will appear, where there will be two sliders "". We set them to the maximum, mark the item opposite " Ctrl - speed up" And " Shift - slow down". We confirm our intentions.
To quickly and easily manage in this way, you can use the "blind method". To do this, put the fingers of the right hand on the buttons: 4, 5, 6, 0. Now, to press other keys, move the desired limb up and down.
It is worth noting that exactly the same system is provided in the Linux operating system. The only difference in launch is that you need to use the keys " Shift + Num Lock". And the manipulations themselves are performed in exactly the same way as in the version with the operating system from Microsoft.
Well, as you can see, different operating systems provide options for controlling the cursor, without connecting the corresponding manipulator. It turns out that the keyboard can be used as a mouse. This is convenient, because such cases can occur late, when the stores that sell gadgets are simply closed. At the same time, there is no way to take a “substitute” even from acquaintances. Users are offered not the most convenient and at the same time effective tool to complete current affairs.
The touchpad is a touch pad that works like a mouse on a desktop computer. At first, many users are skeptical about this part of the laptop, as it seems uncomfortable. In fact, it's all just a matter of time - with prolonged use, the touchpad becomes no less comfortable than a mouse.
When using a laptop computer, it is not always possible to use an external mouse
Another thing is that the touch panel does not always work and respond to touch when turned on, so you should know how to turn it on and if you set it up for the most convenient use. Let's figure out how to enable the touchpad on a laptop and change its settings.
How to enable touchpad?
There are several ways to enable the touchpad:
- Many modern laptops have a small indentation right next to the touchpad - use this to turn the touchpad on or off. If you do not have such an in-depth button, use the following method.
- Every laptop has an Fn function key that performs different tasks when you press it with the F1 to F12 row buttons. One of them is dedicated to launching the touchpad and most often has a corresponding mark on it. Therefore, try pressing Fn with one of the keys in this row, or use each of them in turn.
- It is possible that the touchpad is disabled in the system itself, and it needs to be activated through the BIOS - go to the menu when you start the laptop or reboot it, find the Pointing Device section, where the device will be indicated. To enable it, you need to select the option Enable, disable - Disable. Do not forget to save the changes by selecting the F10 combination or another, opposite which is the Save and Exit option.
If all the above actions did not work, it is worth checking if everything is in order with the drivers - they may be outdated. To do this, do the following:
- Through Start, go to the Control Panel menu and select Device Manager.
- Find the Mouse section, the touchpad line and look at the hardware properties - if the drivers are outdated or do not work (this happens after replacing the operating system), this will be indicated in the window that appears.
- If something is wrong with the drivers and they need to be updated or reinstalled, the computer will do it on its own, or you can find the necessary files on the Internet and specify the path to them in the hardware properties.
If you cannot turn on the touchpad through the operating system, key combinations, BIOS, it is most likely a hardware malfunction - in this situation, you will have to bring the laptop in for repair.
Touchpad settings
In addition to the fact that this detail can be turned on or off, the touchpad can be configured so that it is most convenient for you to use it at work or at leisure. Let's see how you can change its settings.
So, to change the parameters of the touchpad, you should follow these steps:
- Go through Start to Control Panel.
- Select Device Manager and the Mouse section.
- Open the line with the name of the touchpad, select properties and in the window that appears, under the name of the equipment, click on the parameters.
What settings might be useful for you? Pay attention to the following options:
- You can enable or disable scrolling, activate the ChiralMotion function, which allows you to scroll through pages not only from top to bottom, but also in a circular motion - this is convenient if you are scrolling through a long document or website.
- Modern laptop models support multi-touch, which allows you to work with the touchpad with not one, but several touches, which expands its functionality - you can also activate this tool here in the device settings.
- One of the most important tools is sensitivity, which can be adjusted according to criteria such as accidental touches and finger typing. For example, if you constantly hit the touchpad while typing and it responds, you might want to lower the scale in the Palm touch control setting. If you want the touchpad to be less or more responsive to your fingers, select Touch Sensitivity.
- In some cases, if you still constantly touch the touchpad when typing, you can activate the lock when using the keyboard - this way you will be sure that the cursor will remain in its place and will not scroll the page until you enter text or click on individual buttons.
- Additionally, the speed of cursor movement, the area of pressure on different parts of the touchpad and the scrolling speed are adjusted.
As you can see, the touchpad, although different from the mouse familiar to desktop users, can be well adapted to your needs. Now you know how to enable the touchpad using several methods and configure its settings.
The touchpad (touch mouse) provides the full functionality of the laptop, but there are times when the actual touchpad needs to be disabled for more productive work. For example, while typing, your fingers or palm may accidentally touch the touchpad, which will move the mouse cursor to the wrong place in the document.
Alternatively, you can use a free utility for Windows - TouchPad Pal. It temporarily disables the laptop's touchpad while typing. The utility works in the system tray and does not require specific settings. You can get rid of the touchpad activity if you disable it through the BIOS - when you restart the laptop, you need to enter the BIOS by pressing a certain button, usually it is “Del”. In different laptops, the exact way to manipulate the BIOS can vary significantly. In Acer, Asus, Samsung, iRu, RoverBook models – “F2”, in Lenovo – “F12”, Toshiba – “Esc”, Asus – “Ctrl” + “F2”, “F10” in Compaq and Toshiba models, “F1 ” in Dell, Packard-Bell, Gateway, IBM, HP, “F3” should be pressed for Dell, Sony, in Acer - the key combination “Ctrl” + “Alt” + “Esc”. After entering the BIOS is completed, you need to find the “Advanced” tab, and in it click on the link “Internal Pointing Device”. To disable the touch mouse against this link, you need to change the “Enabled” value to “Disabled”. After that, boot the OS as usual.
Many people use the touch panel on a laptop, but when performing work related to processing or typing large texts, it is advisable to deactivate it temporarily or permanently. There are plenty of options to do so.
