Doesn't show otau tv. Original satellite equipment

OTAU TV transfers broadcasting to a new satellite. In this regard, subscribers must reconfigure their equipment.

For reference. - This satellite operator Kazakhstan. It offers over 100 TV and radio channels, 57 of which are available for free, without paying subscription fee. Operator services are available in any region of Kazakhstan. One of the company's advantages is a convenient menu. Users can choose 1 of 3 languages ​​and use those additional functions, How parental control, program guide, etc.

To begin, make sure that:

1. There are no types of interference in the form of trees, high-rise buildings, etc. in the antenna’s field of view, and a direct line of sight to the satellite is created.

2. You can securely attach the “plate” to the building.

3. If service work is necessary, you will be able to easily access the antenna.

4. Storm water or ice floes from the roof will not get onto the “plate”.

5. The antenna is located at a minimum distance from the satellite receiver.

1. Offset “plate” assembled with a reflector, rods, support, positioner, fasteners, and irradiator holder. Depending on the region of installation, the antenna diameter can range from 90 to 120 cm.

3. F-type crimp connectors.

4. RG-6 cable.

5. Subscriber receiver or CAM module. The first option is compatible with all types of TVs. The second is only with those equipped with a CI connector.

What you need to know before reconfiguring your equipment

The scope of work depends on many factors. The location in which it is located is taken into account satellite antenna. The length of the cable and the location in which it is placed are taken into account. subscriber receiver. If the equipment is placed according to the operator's recommendations, then most of the action will focus on reconfiguring the antenna. If you did not follow the recommendations when installing the antenna, it is possible that you will need to move the “dish” to another location. First, you need to reconfigure your satellite receiver or TV (when using a CAM module).

For reference. – national satellite of Kazakhstan. It was manufactured by specialists from JSC Information Satellite Systems named after Academician M.F. Reshetnev". The government of Kazakhstan decided to create it back in 2010. The spacecraft has 28 Ku-band transponders. March 1st in funds mass media information was received that the testing was completed successfully. And subscribers began the transition to the new satellite.

Receiver reconfiguration guide

If you managed to update software receiver to latest version, then you need to reset the settings to factory settings. Enter the menu and select the KazSat-3 satellite. Data about the signal level and quality will appear at the bottom of the TV screen. If you have not updated the software to the latest version, you will have to do so first. Otherwise, you will not find KazSat-3 in the list of available satellites.

Guide to reconfiguring the CAM module

Owners of CAM modules must complete the following steps. Enter the TV settings and change the Intelsat 904 spacecraft (60°E) to the KazSat-3 spacecraft (58.5°E). If you do not find this satellite in the list, you can enter its name manually as “Custom”. After selecting a satellite, we proceed to changing the frequency. Change LNB to “9750”. Next, add 6 transponders, use the settings specified in Appendix 1 below. To do this, go to the menu for setting/changing transponder parameters. Select the added transponders and check if the signal matches required level. This can only be done with a pre-tuned antenna.

For reference. They provide subscribers with access to media content in digital television. CAM modules - great alternative satellite receivers, since they do not take up extra space and perform all the necessary functions.

Note: By angle we mean the angle by which the line of sight on the spacecraft deviates horizontally. By azimuth we mean the angle between the direction that points to the spacecraft and north.

Guide to reconfiguring a satellite dish:

1. Determine the coordinates optimal placement"dishes". Using a special device (GPS module), determine the appropriate latitude and longitude.

2. Calculate optimal values azimuth and elevation. Then determine the “LNB tilt angle” value. Adjust the antenna only after all values ​​are known. The calculation can be made online using special programs, or using applications for mobile devices working for Android based and MacOS.

NOTE! THERE WILL BE DIFFERENT PARAMETERS IN DIFFERENT REGIONS OF KAZAKHSTAN. THERE IS NO SINGLE STANDARD.

3. Next, we try to rotate the antenna in azimuth, focusing on the parameters of the KazSat-3 satellite (58.5°E). To determine the correct position, we use a device or one of its analogues. The antenna can be tuned manually, without the use of special instruments. But it will be a little difficult. In this case, we focus on the level and quality of the signal. It is necessary to ensure that the receiver displays the highest quality picture on the TV screen. To do this, we try to change the elevation angle.

To set up over-the-air television, you don’t need to call a technician. If you have step-by-step instructions, you can easily cope with this task yourself. How to set up Otau TV on your TV without wasting time and nerves? Read on.

How to set up Otau TV on your TV yourself

First, let's deal with necessary equipment. To catch maximum amount national channels terrestrial television V good quality, it is important to use decimeter antenna in combination with a special receiver.

OTAU TV recommends the Strong SRT-8520 receiver. It is capable of processing the T2 signal and decoding the IRDETO cipher. In addition, for more quality reception better to apply outdoor antenna. Internal organization also does a good job of this, but only if the subscriber is not too far from the radio and television station.

So, step-by-step instruction OTAU TV settings looks like this:

Step #1. Receiver connection:

• Turn the receiver back towards you and familiarize yourself with the connectors. We are interested in: ANT input, RSI or HDMI set.
• Connect the antenna cable to the ANT input.
• Connect the RSI cable (“tulip”) to the corresponding sockets by color. The yellow cable is intended for transmitting a video signal (video-in), red and white - for audio: red - audio-in stereo; white - audio-in mono+stereo.

• HDMI is a more advanced analogue of the “tulip”, thanks to it there is no need to understand the matching of colors and connectors.

Note: An HDMI cable must be purchased separately as it is not included in the package.

Step #2. Network connection:

• Connect the receiver to the electrical outlet by inserting one end of the cord into the device and the other into an outlet.
• Activate the receiver by pointing the remote control at it remote control and pressing the red button on top of it.

Step #3. Setting up Otau TV channels:

• Using the TV remote control, switch it to AV mode. When the receiver is turned on, the inscription “National Digital Terrestrial Television OTAU TV” should appear on the screen.

Note: if there is no sign, check whether the receiver is plugged into the network and that the connection is correct antenna cable and connecting wires.

• Wait for the menu to load. This usually takes no more than forty seconds.
• Go to settings. Select the interface language, quality, image format and region of location. If you use active antenna, set this function in the Antenna Power parameter.
• Click the "Next" button and it will launch automatic search channels.

Setting up Otau TV manually

If automatic method did not give results, run manual setting channels.

It's easy to do:

1. Press the exit button on the remote receiver.
2. Go to "Antenna Settings" and set frequency range broadcast depending on your region.

Note: full list You can find broadcast frequencies in the user manual or find out by calling support.

As you can see, there is nothing complicated in setting up Otau TV. Connect the equipment according to the instructions, search for channels and enjoy excellent quality digital terrestrial television. Detailed information You can find connection conditions on the website otautv.kz.

To set up over-the-air television, you don’t need to call a technician. If you have step-by-step instructions, you can easily cope with this task yourself. How to set up Otau TV on your TV without wasting time and nerves? Read on.

How to set up Otau TV on your TV yourself

First, let's look at the necessary equipment. To catch the maximum number of national terrestrial television channels in good quality, it is important to use a decimeter antenna in combination with a special receiver.

OTAU TV recommends the Strong SRT-8520 receiver. It is capable of processing the T2 signal and decoding the IRDETO cipher. In addition, for better reception it is better to use an outdoor antenna. The internal device also copes well with this job, but only if the subscriber is not too far from the radio and television station.

So, step-by-step instructions for setting up OTAU TV look like this:

Step #1. Receiver connection:

Turn the receiver back towards you and familiarize yourself with the connectors. We are interested in: ANT input, RSI or HDMI set.

Connect the antenna cable to the ANT input.

Connect the RSI cable (“tulip”) to the corresponding sockets by color. The yellow cable is intended for transmitting a video signal (video-in), red and white - for audio: red - audio-in stereo; white - audio-in mono+stereo.

HDMI is a more advanced analogue of the “tulip”, thanks to it there is no need to understand the matching of colors and connectors.

Note: An HDMI cable must be purchased separately as it is not included in the package.

Step #2. Network connection:

Connect the receiver to the electrical outlet by inserting one end of the cord into the device and the other into an outlet.

Activate the receiver by pointing the remote control at it and pressing the red button on top of it.

Step #3. Setting up Otau TV channels:

Using the TV remote control, switch it to AV mode. When the receiver is turned on, the inscription “National Digital Terrestrial Television OTAU TV” should appear on the screen.

Note: If there is no sign, check that the receiver is plugged into the network, and that the antenna cable and connecting wires are connected correctly.

Wait for the menu to load. This usually takes no more than forty seconds.

Go to settings. Select the interface language, quality, image format and region of location. If you use an active antenna to receive the signal, set this function in the Antenna Power parameter.

Setting up Otau TV manually

If the automatic method does not produce results, perform manual channel tuning.

It's easy to do:

1. Press the exit button on the remote receiver.

2. Go to “Antenna Settings” and set the broadcast frequency range depending on your region.

Note: You can find a complete list of broadcast frequencies in the user manual or find out by calling support.

As you can see, there is nothing complicated in setting up Otau TV. Connect the equipment according to the instructions, search for channels and enjoy the excellent quality of digital terrestrial television. Detailed information about connection conditions can be found on the website otautv.kz.