Rollback Windows systems or System Restore is a function of urgent computer resuscitation. It returns all settings and programs that were on the computer before the crash. You should resort to using it after critical errors, not properly installed programs and drivers when the PC is not started. In cases where the system has been damaged by something and attempts to eliminate it are currently unsuccessful.
There are three ways to roll back the system. Everyone brings the same result. The difference is how damaged the performance of the computer is and whether it is possible to log into Windows. Consider the first option: Windows starts, but errors prevent the computer from working normally. To enter the System Restore window, click the "Start" button, then "All Programs". Go down the scroll bar and go to the "Accessories" folder, then to the "System" folder and click "System Restore". In the window that appears, click the "Next" button. Now we select a restore point. Choose the most recent (within reason), the moment when the computer worked perfectly. Click "Next". We confirm the restoration by clicking the "Finish" button. In the dialog box, we confirm the last warning with the "Yes" button and observe the preparation process for system recovery.
Hope you were able to rollback Windows and all problems have been fixed!
Rolling back the windows 10 system means returning the settings to an earlier state, but it does not mean returning to the seven or eight from which the update to ten may have occurred. You can only rollback if a restore point has been created and it is disabled by default.
How to roll back windows 10
To do this, you need to go to the recovery section, for example, through the classic "Control Panel". In this panel you need to find the recovery partition, click on it. After that, three links will appear on which you can go. You must select "Start System Restore" by clicking on it.
Then put a tick in front of the line "Select another restore point", it will open big choice rollbacks after clicking "Next". 
A window will then appear showing all previously saved points. You need to select the required one by highlighting it with the left mouse click, and again select "Next". 
Then the Windows 10 system will do everything on its own. It only remains to wait a while. If the system files were deleted before the procedure, then it will not be possible to return everything back. This can be done only if you have an image of your operating system, for example, on a disk or flash drive.
How to rollback windows 10 system
To do this, you need to go to the "Control Panel", select the "System and Security" section, open the "System" item, then click on "System Protection" (top left). After that, the "System Properties" window will open, in the "System Protection" tab, click on the "Restore" button. 
In the window that opens, select a suitable point, click "Next". 
It will be shown to what date the rollback will occur, click "Finish". 
How to rollback windows 10 through recovery environment
To reanimate Windows 10 is provided special environment recovery, implemented in the form of a selection menu different actions on the blue background screen. 
If the computer boots, then you can get into this environment by holding Shift key and pressing the restart button. 
If it does not boot at all, you can try to get into the recovery environment by holding down the Shift + F8 keys during system boot. As soon as the computer starts to boot, you need to quickly press the Shift key, and then very quickly press the F8 key.
It's easier to enter this environment with installation disk or a specially created recovery disc. To do this, you need to insert installation DVD into a computer drive, or connect a bootable USB flash drive. Set the BIOS to boot from the appropriate media. Click "Next" in the first window of the OS installer.
In the window that opens, select "System Restore". 
This will open the recovery environment, in the menu you need to open the "Diagnostics" section. 
Click "Advanced options". 
Next, select the recovery partition. 
If your computer has two operating systems, you will have to choose the one you need.
The process of rolling back the system will start. Click "Next". 
In the window for selecting restore points, check the box for showing other points. Then it will be possible to choose a suitable date. After choosing the optimal point, click "Next". 
Then "Done". 
Confirm the rollback decision. 
When the process is complete, restart your PC. 
After that, the restored OS should start.
How to roll back the system
How to roll back from windows 10 during OS recovery and delete all user data, including account settings, personal settings and the files will be discussed further.
Using this method after per Windows installations 10 turn out completely new computer, which will not save important information, which was previously stored there.
To return the OS to its original state, you need to click on the Start button and execute the "Options" command. The Application Options window appears.
Then click on the Update & Security icon. Go to the left panel, click on the "Recovery" section. On the right panel find the subsection "Return the computer to its original state", click the "Start" button. 
A new window will ask you to choose one of two recovery methods initial state computer. 
You need to select one of the options ("Keep my files" or "Delete all"), click "Next".
Has your computer or laptop started to glitch badly? Or does it not turn on at all? First of all, try Windows 7 System Restore. The operation is performed in 10-15 minutes, but it can really help. Indeed, in in this case the system rolls back windows 7 a couple of days ago, when the PC or laptop was still working fine.
Windows 7 system restore: what is it?
What is Windows 7 Rollback? This is an operation during which all parameters and system files are restored from the created Windows backup copies. That is, if you accidentally deleted important files or changed the settings (for example, set new driver), and after that the computer began to slow down (or does not turn on at all), then this can be fixed. By at least worth a try.
Restore the previous windows versions is carried out from checkpoints that are created every week, as well as after any changes (installation or removal of programs). Typically, this feature is automatically enabled. Plus you can create checkpoints manually.
How to check if this option is enabled on a computer / laptop, and how to create new points manually, you can read here - How to enable system restore?
There are at least 3 ways how to start windows 7 recovery:
- Windows means;
- across safe mode;
- using a USB flash drive with Windows 7.
Let's consider each of them in more detail.
When you roll back windows 7, all your personal files will remain in place. Therefore, you can not worry about this.
But there is one caveat here. When restoring, files recorded between today and the day to which you decide to rollback may disappear. Therefore, if you recently (today, yesterday, the day before yesterday, etc.) dropped on your PC important documents, it is better to save them to a USB flash drive. Just in case.
How to roll back the system using windows 7?
The first way to roll back windows 7 is by means of the OS itself. But it only works if your PC or laptop turns on. It doesn't matter if it freezes or glitches, the main thing is that you can load the desktop.
So, to start Windows 7 System Restore, do the following:
After that, the rollback of the Windows 7 system will begin. When the operation is completed, the computer or laptop will reboot, and you will see a message that everything went well.
Restoring windows 7 startup via safe mode
If the PC or laptop does not turn on at all, then you can try restoring windows 7 startup in safe mode. To do this, when turning on (or restarting) the PC, press the F8 key repeatedly until the menu appears. Next, select the "Safe Mode" item and click Enter.
However, there are some nuances associated with different versions Windows. Therefore, in order to avoid difficulties, I recommend that you familiarize yourself with - How to enter the safe Windows mode?
Wait until the computer or laptop turns on, and then perform all the same actions as in previous version... That is, to roll back the windows 7 system, follow the steps 1 through 7 described above.
Restoring windows 7 from a flash drive
And the third way: recover windows 7 from a flash drive (or disk) with installation files... The disadvantage of this option is that you need to write it to the Windows USB flash drive, which is on your computer or laptop. And the plus is that in this way you can try to restore the windows 7 system, even when the PC does not turn on and safe mode does not start. That is, this is your last chance.
In this case, you need to create bootable USB stick With installing Windows(you can do this from friends or acquaintances), and then download windows from it. Read more about this here:
How to make bootable flash drive windows in UltraISO?
How to set boot from USB stick in BIOS?
If you did everything correctly, a window with the installation of windows 7 will start. To restore the Windows system, do the following:
Wait for the procedure to be completed and click on "Restart". Then immediately remove the USB flash drive from the connector (or the disk from the drive), after which the PC should turn on in the usual way.
By the way, restoring windows on a laptop and a computer is carried out in the same way. So you can try any method you choose.
That's all. Now you know how to rollback windows 7. Hopefully, one of the 3 methods will work, and you can restore your PC or laptop to work.
What if there are no restore points? You can try one option - restore windows 7 system without restore points.
(1 ratings, average: 5.00 out of 5) Loading ...
it-doc.info
How to restore windows 7 system without restore points
The computer system is a complete "organism", usually working without failures and problems. However, no device is immune from breakdown or malware attack, when the integrity of the system is completely violated. In such cases, it is important to react in time and try to quickly restore the system. Most often, restore points are used for this purpose, but they must be created in advance. Unfortunately, it is not always possible to play it safe, therefore this material I want to devote to the question regarding how to restore windows 7 system if there are no restore points. Moreover, there are far from one methods, and it is better to be familiar with them, otherwise you do not know when you will have to resort to similar methods.
Recovery using windows
The first option, which I want to tell you about, is to restore the system using the most operating system... I will not beat around the bush, I will immediately go directly to the actions:
Safe mode
Above, a situation was described when the computer's OS boots and works. But you are not always so lucky, it happens that it simply does not load. How then to be? Simple: use Safe Mode! Earlier, I have already described how this procedure takes place, so I will repeat it literally in two words. At the moment when the computer just started to turn on, you need to press the F8 key. If everything goes well, a black window with options for action will appear in front of you, if not, you will see the windows logo, therefore, you need to turn off the computer again and start over.
Go to the "Safe Mode" item and do almost the same thing as described above.
That is, first go to "System Restore to an Earlier State", then click the "Start System Restore" button. Now you select a checkpoint, confirm the recovery of disks and recovery points, after which the recovery procedure will start. After that, it will not be superfluous to try to improve the performance of the system by getting rid of unnecessary garbage on a PC.
Hope my advice helped you!
learnwindows.ru
How to roll back Windows 7 to a restore point?
Hello dear readers of my blog. In the previous lesson, we learned how to create a restore point, because, as you know, it is recommended to do this every time before installing new programs or updating device drivers. Well, in today's lesson we will talk about rolling back the Windows 7 system to the previously created control point... To begin with, I want to warn you that you do not need to worry about the safety of the files contained on the hard disk, because they will not be touched, however, the settings you made after last creation checkpoints will be reset. Now let's get started! To roll back Windows 7, open the start menu, type system restore in the search bar and select "restore system files". In the next window, click the "next" button, then select the control point that is the last and click "next" again. 
Now confirm your intention to rollback windows system by pressing the "done" button. 
Further, the system will warn you that when the recovery process begins, it cannot be interrupted, to continue, click "yes". After that, the system rollback will begin, after which the computer will shut down spontaneously, and after rebooting, it will display a notification on the successful recovery on the desktop screen, after which all that remains is to close it.
Now you know how to roll back a Windows 7 system to a checkpoint and in the event of a system failure, you will always know how to fix it. The main thing is not to forget that every time before updating device drivers or downloading some software that is not on the official website of its developer, it is recommended to create a restore point.
That's all for me, if you have any questions regarding today's topic, please contact me. Thank you all for your attention and see you soon.
www.yrokicompa.ru
How to restore windows if there are no restore points?
Computer or laptop crashes happen unexpectedly. It seems that everything worked yesterday, but today it does not even turn on. In this case, the easiest way is to roll back the system to a workable version.
And how to restore Windows if there are no restore points? It is not for nothing that there is almost nothing on the Internet on this topic. But there is still one way to restore the work of a PC or laptop. Consider this your last chance.
System restore without a restore point
How to roll back the system if there are no restore points? Not really. After all, if these very points are not there, then there is nothing to restore from. Is it logical? It is logical.
Still, a system restore without a restore point is possible. But no longer by means of Windows, but with the help special program- LiveCD.
Making an emergency flash drive
Boot LiveCD images a lot, so any can be used. For example, Active Boot is considered a great option.
When choosing a program, pay attention to its capabilities (what it can do). Need to reset your password? Recover accidentally deleted files? Check your computer for viruses? Looking for a program that can do this.
To create an emergency flash drive, you need to burn this LiveCD to it. For example, with with UltraISO.
Read more about it here - Creation bootable USB in UltraISO
Usually, to enter the BIOS, you need to press the F2 or Del button. Although there can be many options (especially on laptops).
At turning on windows on the first screen you can see the button to enter the BIOS. V this example is the Del button. Change boot priority
The flash drive (USB-HDD) was put in the first place (First Boot Device). Now, when you turn on windows, it will be loaded first. The second is the CD-ROM (floppy drive). If you do not know how to do this, you can read detailed instructions- Configuring BIOS to boot from a USB flash drive
Restore windows without a restore point
If you did everything correctly, the laptop or PC will boot from the USB flash drive, after which the LiveCD program will start. And then do what it was all started for.
That is why you need to choose the right program, which was written about a little above. If she knows how to reset the password or check the PC for viruses, then simply select the appropriate item in the menu and wait for the procedure to be completed.
But first of all, it is recommended to copy all important files, documents and photos to a USB flash drive. Almost all LiveCD programs have an explorer (like Total commander), with which you can open desired folders and copy them to your USB stick.
If the reason for the failure of the computer or laptop is unknown, then you can try to restore windows from archival copy registry. The LiveCD will also help you with this.
To do this, boot from the USB stick and open the RegBack folder. She is on the way:
windows \ System32 \ config \ RegBack
In this case, the name local drives is likely to change. For example, the local drive C can be renamed to D or E. Focus on the total size, as well as the folders and files that are on it. You don't have to look at the letters.
So, to perform a system restore without a restore point, you need:
After that, restart your PC (or laptop) and boot from HDD disk(to do this, you need to change the boot priority of devices in BIOS).
If the malfunction was related to the registry, this will help fix the problem. After that, windows will be loaded and will work in the same mode.
This is how a windows 7 restore without a restore point is performed. There are no other ways (except with the help of special programs). Henceforth, try not to allow similar situations... To do this, configure Windows to automatically create restore points.
Read more about it here - How to enable System Restore in windows 7?
(2 ratings, average: 2.50 out of 5) Loading ...
it-doc.info
How to create a system restore point and how to rollback windows XP / Vista / 7/8
Sometimes a situation arises when it is necessary to promptly cancel unwanted changes in the system: for example, after updating the software, installing drivers or cleaning the registry, stability problems began windows work... However, not all users know how to rollback, how and when to make rollback points on their own, and in what cases the OS makes them in auto-mode - in general, for everything pressing issues on this important topic, I will try to answer compactly in this article.
Let's start by checking if the System Restore service (rstrui.exe process) is running. To do this, through the "Start" button, click right key mouse on "Computer" → then, in the drop-down menu, select "Properties" → "System protection". The available security settings are displayed in the Security Settings area. local drives and the degree of their security. By default, System Restore is enabled for the drive where windows (C :) is installed. However, you can enable it for any other disk by marking the desired one (for Vista, these are all manipulations!) And clicking the "Configure" button (see the first screenshot in Win7 design). In the window that opens, activate "Restore system parameters and previous versions files "and confirm the changes with the" OK "button. In addition, the ability to manage disk space for system recovery, as it was in XP, but for some reason it was "forgotten" in Vista (see the screenshot below).
When does windows itself (automatically) create restore points?
This happens in following cases:
- when installing programs and drivers;
- when installing OS updates via the Internet;
- on schedule (every 24 hours at windows vista and every 7 days in the "seven");
- when the system is rolled back to one of the earlier restore points.
Of course, the user can independently create a rollback point (see the first screenshot) before any potentially dangerous actions (such as changing system files) on the "more - not less" principle.
How do I roll back the system?
All windows restore points are hidden system folder C: \ System Volume Information. You can independently "roll back" to the desired point in several ways, for example:
- via the "Start" button, click "Help and Support" → "Undo changes using System Restore" → "Restore an earlier state of the computer" and "Next" (for windows XP);
- through "Start", click "Control Panel" → "System Restore" (or "Recovery") → "Start System Restore" → in the final select the desired point rollback (see screenshot);
- via the "hot" key combination "WinKey + R" → in the window enter rstrui → "OK" (the most convenient option for windows 8).
Several important notes
- I am quoting a help article from the Microsoft website: "System Restore does not protect drives with the FAT32 file system and other file systems FAT, since such disks do not support shadow copies". In XP, when creating rollback points, only key files systems and programs, unlike windows Vista / 7/8, where, thanks to the Service Shadow Copy Volumes (English Volume Shadow Copy Service or VSS), changes are recorded throughout the section. In any case, personal files are not included in OS restore points, i.e. all your documents and photos will not disappear after the "rollback".
- When there is a k.-l. problems with loading and stability of "Windows" should be used last point recovery that was created shortly before the date and time the problems started. If the situation, alas, has not changed, you can always choose another (earlier) rollback point.
- Beginners computer users I recommend reading my article " Fast creation System Restore Point: Single Click Restore Point (SCRP) ". More experienced users having a registry cleaner on the PC Wise Registry Cleaner, the luckiest one, because everything you need for operational creation rollback points and, in fact, "rollback" windows are "at hand", see details here.
Dmitry dmitry_spb Evdokimov
The question is whether they will be able to return after that to old version OS, in the case when the "ten" does not like it, will they have to completely reinstall their OS.
There are a dozen methods for how to roll back to the original version of your OS. To do this, you can use the tools built into the OS or resort to using additional tools.
How to rollback windows 10 to windows 7 using built-in rollback option
To start the process, press the "Win + I" button in combination, thus calling the settings screen. Then click on the item titled "Update and Security". Then select the section called "Recovery", it will be on the left navigation. A "Return to Windows X" window will appear, where x is the version of the OS that was installed earlier. Click the "Start" button.
You will need to select the reason for switching to windows 7. This data is sent to Microsoft. Put a tick on the appropriate one of all the proposed options. Click "Next". 
Providing any reason why you decided to roll back from the new version, you will be warned about the likely consequences of the installation. Then all the recommendations for carrying out the process will be shown. Click the "Next" button. 
Then Microsoft will thank you for using her product. If you decide to perform a system restore from 10 to 7 Windows, you will need to click on the item "Return to Windows 7". 
After performing all the manipulations, the previously installed update will be canceled. So it will be possible to return windows 7 back.
How to return windows to an earlier state
If you have upgraded Windows to newest version, but since that time has not yet passed a month, you can easily cancel the update, return to the version that was before.
How to remove 10 and return 7? This manipulation is possible due to the creation of the "Windows.old" folder on the hard drive of the computer.
It stores all information about previously installed version... This folder is stored on the hard disk of the device for exactly one month. After this time, it is deleted irrevocably. Therefore, it will definitely be impossible to return the old OS using this method.
The folder takes up a lot of disk space, resulting in a shortage free memory on a PC. If updated regularly, the system automatically creates backups, each of which is approximately 10 GB.
During the rollback will be used Windows files from the folder "C: \ Windows.old".
You can find it as needed in the Explorer / File explorer... Opening it you can restore certain files from the old installation. 
You can find out how much space it takes with the Disk Cleanup tool. To launch it, open the "Start" menu, enter the sentence "disk cleanup" in the search, select the search result "Free up disk space by deleting unnecessary files". Then run the tool and scan the disk. Click on the item called Clean up system files.
From the list select the item under the name Previous Windows installations / Previous Windows installations, after which it will be indicated how much space the old OS takes up space on the hard disk. If you no longer need it, you can uninstall it using the Disk Cleanup application to free up a lot of space. 
How to install windows 7 instead of windows 10
If you do not know how to change the OS, then you can install the version you want again. This manipulation will erase all the information on the disk. To install you need bootable DVD/ USB stick. Insert the media into your computer and start the installation. If necessary, you can create an image at Microsoft, with using Windows 7 Software Recovery and Windows 8.1 Installation Media. 
Reboot the system and wait for the screen with the message "press F12". A window will open with a list of all boot devices, you need to choose the one you want.
Use the arrow keys to select a device, then press Enter. Then follow the instructions of the installation wizard. After that, the seven will be installed on your computer.
How to restore Windows 7 from an image
It is possible to return the OS using a pre-recorded image. You need to create it before updating the system from Windows 10. If updates are installed, the disk image will not help.
If the hard drive or removable media there is a disk image with Windows 7, then at any time you can return everything to its previous state.
First, you need to open the control panel, then find an item called "System and Security".
Select "Backup and Restore".
In addition to system recovery, it is possible to create a disk image by clicking on the line "Create a system image" on the left side of the window. 
Then choose where to save the image (on the hard drive, on removable media or on the network).
Then select those disks that need to be backed up immediately with the creation of an image. To create images of several disks, you need to put a checkmark opposite the corresponding items.
After confirming the backup parameters, the image creation process will begin. Upon completion of which, a corresponding message will appear.
Often, after installing a program, a computer under Windows control 7 begins to behave in a strange way. Glitches, interface slowdown, failure to start the system - all this suggests that you have installed malicious software or your PC has undergone viral attack... What to do in this case? How to rollback Windows 7?
In fact, the system rollback is the only one the right way solving the problem with Windows glitches after installing any software. Windows automatically creates a restore point prior to installing programs. If the system includes automatic creation restore points, then you can roll back the system from under Windows. If the computer does not turn on, then you will have to restore the system from safe mode. In case of damaged system files, Windows recovery will have to be connected boot disk With Windows distribution 7.
Let's analyze each recovery method separately and highlight their benefits.
1. Roll back the system from under Windows
The simplest and quick way system rollback - using a special recovery program in Windows 7. But it has one significant drawback: without a restore point, you will not be able to roll back the system.
Open "Start", select "All Programs" and follow the path "Standard >> Utilities". Find the "System Restore" program in the list and run it.
You can open "System Restore" in another way: click the "Start" menu and start typing the word "recovery" in the search. After 4-5 Windows letters will offer you programs, where we select "System Restore" from the list.
After starting the program, a window will open, which briefly but clearly tells you what System Restore is. Click "Next".
If there are restore points on the PC, the system will offer the entire list. Select the last point by date and press the "Next" button. If you need to view the list of programs that will be "affected" during the recovery process, click on the "Search for affected programs" button.
In the next window, confirm the rollback of the system with the "Finish" button.
The system will warn you again that the recovery cannot be interrupted. We click "Yes" and wait for the end of the process. During a system rollback, the computer may restart several times.
2. Recovery using safe mode
Most users roll back the system in "hopeless" cases. With them, the PC refuses to boot, but for this problem there is a safe mode that allows you to roll back the system to working condition... In order to enter the safe mode of the system, when starting the PC, press the F8 button and use the "up / down" buttons to select "safe mode" and click Enter.
Windows will start with a black desktop and "degraded" graphics. Then you can start the system rollback process described in the first paragraph.
3. Windows recovery using a boot disk
Minus this method the fact that you need to always have at hand a bootable disk with the operating system Windows 7. But this method can restore the system in the most severe cases, even when Safe Mode does not work.
Insert the bootable Windows 7 disc into the drive. At Windows startup press F12 on the keyboard and select from the list optical drive... After loading the disc, select the Russian language and click "Next". Then Windows 7 will offer to install. But you need to click on the "System Restore" link.
After searching installed systems in the new window, select "System Restore".
When you start this program, the same rollback process will begin as in the first paragraph of the article.
After restarting the computer, we take out the disk from the drive and enjoy the restored Windows 7.
How do I roll back a system to Windows 7 if a checkpoint has not been created? This question torments many, but there is no solution to this problem. Windows cannot be restored without a checkpoint. As a result, the only option is to reinstall Windows.
