If your favorite way to spend your free time is playing computer games or watching movies online, no doubt it occurred to you one day that the TV screen will provide you with a larger, more spectacular and more comfortable picture.

Today, many people connect a TV to a computer to use it as an additional monitor. Almost all modern TVs provide such an opportunity, so there are few problems when connecting, but still they happen.

Connecting via HDMI cable

If earlier a special cable with several “tulip” connectors was used to connect the TV to the computer, today an HDMI cable perfectly fulfills its role, which provides the highest quality of the screen image.

The connection itself is not a problem, because HDMI connectors are available on any TV and on any computer device - a stationary system unit, a laptop, etc. You just need to connect the appropriate cable connectors to them, and the job can be considered done.

Sound problems

But here sometimes troubles begin: if the image appears on the TV screen without problems, then there are difficulties with sound transmission. Rather, there is sound, but it comes from the computer speakers, and the sound on the TV remains muted.


Of course, you can leave everything as it is, but if you want to achieve complete comfort, you need to complete the connection. First of all, make sure that the sound on your TV is really not coming from the computer, and not turned off. To do this, try adjusting the volume with the TV remote control.

After making sure that everything is in order, look at the computer volume slider - perhaps it is set to “zero”, and the sound does not go to the TV speakers for this very reason.

Sound sync

As you know, in the lower right corner of the computer screen on the taskbar there is an icon for sound devices. Sometimes it is used to increase or decrease the volume, or to adjust the sound. Let's use it this time.

Right click on the speaker icon. In the menu that opens, select "Playback Devices" and open this tab. All available sound devices should be listed there, among which the TV should also be on the list.

You just have to select it and right-click to open the context menu, in which check the box next to the item "Use by default" . In most cases, this is enough to ensure that the sound is normally reproduced by the TV speakers.


A slightly more complicated situation is when the TV is not displayed in the audio devices menu, i.e. the computer just "doesn't see" its speakers. In this case, as in many others, a hard reset can help. Without disconnecting the HDMI cable, .

When the reboot process is complete, open the sound menu again and make sure the TV appears in the list. If it is inactive, proceed as described above - set its status "Use by default" .

Sometimes, in order to resolve a device conflict, it is necessary to disconnect all other audio peripherals, such as speakers and headphones, from the computer. Otherwise, a device priority conflict occurs - the computer cannot choose which one to use to play sound. When the extra devices disappear, the situation returns to normal.

The possibility of a cable defect cannot be ruled out - if some of its connectors are oxidized, or one of the wires is broken, sound reproduction becomes impossible. In order to set up the system, you will need a fully functional tested HDMI cable.

If your computer has a video card NVIDIA, the sound problem may lie in its settings. These video cards have their own sound controller, the operation of which will have to be adjusted through the sound menu of the player that you use to play movies.


Open the player menu and check the sound settings by checking the box next to "NVIDIA High Definition Audio". After that, the problem should be resolved.

— The HDMI interface is a protocol for digital audio and video signal to the monitor. It allows you to freely and easily display a high-definition picture and sound from a PC to a TV. To transfer pictures and audio, you just need to connect a laptop or PC to the device using an HDMI cable.

However, as is often the case when connecting any other information display protocols, some difficulties may arise with HDMI. Frequent problems are created by incorrect adjustment of the Windows OS. The most famous errors are the unavailability of the sound picture on the TV while connecting a computer to it through this interface. Such a problem as no audio signal via HDMI is fixed on the TV in several ways, which will be presented later in this material.

It is important to know: Before following the recommendations posted here, you need to check the following point. Make sure that the unavailability of sound on a TV with a computer connected to it via HDMI protocol is not the cause of incorrect TV settings. Sometimes such a misunderstanding occurs due to the elementary disabling of the “Silence Mode” option, or the volume control is set to the leftmost position.

How to choose the right playback system

When connecting a PC to a TV using an HDMI connector, Windows will automatically recognize the audio source. If a No HDMI sound on TV, by coincidence, when for some reason this did not happen, then you need to manually set the source of the audio signal. In this case, the TV is assigned. This is done in this way:

1. On the bottom right side of the screen, click on the “Digital audio” speaker icon and select “Playback devices” in the drop-down list;

2. In the “Sound” tab that opens, check the equipment you need, then on this block, in the drop-down list, select “Use by default”;

3. Now, to save the selected position, press the Apply and Save buttons in turn.

Attention!: If you do not see your TV or monitor in the list of audio output elements recognized by the system, then do the following. Use the mouse to check the checkbox "Show disconnected devices" and also "Show disconnected devices". And now look for your connected TV there.

Maybe so, No HDMI sound on TV, and even after these manipulations, you did not find a monitor connected via the HDMI port among the invisible components. Then it is still possible to perform the manipulations given below in the material.

No HDMI sound on TV due to hardware issue

Another fairly common malfunction is when there is no sound when the TV is connected to a computer using an HDMI interface. This is a hardware failure of some component, which is detected under two circumstances:

Damaged HDMI connector and No HDMI sound on TV. It is possible that the connecting cable has mechanical damage, or the connector itself has become unusable. In this case, it would be advisable to ring this cord with a multimeter;

To connect the HDMI protocol to the audio playback gadget, a special adapter is used. If you use adapter cables such as DVI-HDMI or VGA-HDMI, then the audio signal will not go through them. It is a completely different matter when the DisplayPort-HDMI signal interface is used, which is used to connect to digital monitors.

Installing drivers to provide audio through the HDMI protocol

In addition, there is another factor influencing why No HDMI sound on TV- this is the absence of the necessary drivers in the system.

To determine the presence of software for organizing an audio signal through the HDMI port on a computer, you need to look in the device manager. This is done in this way:

1. Simultaneously press the buttons on the "clave" Windows + R and in the "Open" field, write the command devmgmt.msc;

2. You will now see the Device Manager utility. At the top of the program, click on the "View" tab and check the "Show hidden devices" checkbox;

3. Go to the "Sound, game and video devices" tab. If there is only one component in the list, then this is most likely a PC sound card. And this means that there are no drivers for providing an audio signal through the HDMI connector and No HDMI sound on TV. It is also possible that the HDMI component is recognized by the system, but is in a disabled state. Under such circumstances, use the mouse to mark the desired item and turn on the device.

If the list of sound devices recognized by the system includes only an audio card, then in this case you should install drivers for the video card. In particular, those software components that provide audio signal playback via the HDMI protocol.

To download the necessary drivers, you need to go to the official website of the video card manufacturer and select the desired version there. Then, on the computer, run the driver installation file and follow the instructions of the installer. Do not forget to select manual mode at this installation step, and from among the available drivers, select "HD Audio Driver".

Important: The driver that provides the creation of an audio stream via the HDMI interface is designated "HD Audio Driver" in particular on an NVIDIA video card. On maps from other manufacturers, it will most likely be marked differently. After the driver installation is complete, restart the computer, and then try to connect it again via the HDMI port to the TV.

Instruction

Perhaps the simplest and most simple way to output sound to a TV is to connect using a stereo cable with a 3.5mm jack on both sides. These cables are often bundled with many MP3 models and can be used not only to connect, but also to play audio through your car or car audio system.
The cable connects to the headphone jack on your computer, but to the Audio IN jack, which is similar in appearance to the headphone jack. The TV will then switch to A/V mode and the sound from the computer will be heard through the TV speakers. If there are several A / V modes, you should turn on sound playback, and determine the desired A / V mode by selection.

Another connection method requires both devices to have an HDMI interface connector and an appropriate cable. HDMI connectors can be found on TVs and computers released in the last few years.
Connect the computer and the TV with an HDMI cable and switch the TV to the external source playback mode. There can be several modes and you will have to select the one you need using the selection method using the button on the remote control, which usually has A / V or a square icon with an arrow. It will be possible to determine a successful connection by the appearance of sound from the computer in the speakers.

Helpful advice

When connecting via HDMI, set the image output mode to an additional monitor in the properties of the computer's graphics card, and you can output not only sound, but also an image from the computer to the TV.

Sources:

• how to connect computer to tv

Built-in speakers often have mediocre sound quality. You can improve it by connecting external speakers. They can be connected in two ways: through an amplifier or directly.

Instruction

In order to use the first method, you will need maintenance skills and impeccable knowledge of safety regulations. Turn it off, open it (do not subject it to shocks so as not to break or the LCD matrix), and then, without touching the high-voltage wire, as well as parts of the power supply, video amplifier, power converter (in LCD), horizontal scanning (and in a tube TV - and any other parts), unsolder the wires going to the loudspeaker, build them up with a long cable, and then bring them outside so that they do not pass near any high-voltage circuits. For a stereo TV , run the cables out from both . Then close the body of the device. If you are not confident in your abilities, entrust this operation to a qualified specialist.

Take a speaker system with an impedance similar to or greater than the built-in TV. Connect the cable you brought outside to this speaker system. If the impedance of one system is lower than that of the TV speaker, but you have two of them and their total impedance exceeds this figure, connect them in series. If the TV is in stereo, connect through the speaker system instead of each of the built-in speakers.

The second method does not require significant qualifications from the master, but it involves the use of an external amplifier and requires a linear output. sound. Remove the output signal from the Audio out RCA connector (case - common wire, center contact - output sound), from the DIN-connector "Tape recorder" (the middle contact is common, and the output, depending on the year of manufacture of the TV, can be either the extreme right or the extreme left contact) or from the SCART connector (pin 3 - output, 4 - common) .

Connect the signal to the input of the amplifier, where an RCA or DIN connector can be used. The connection method to these connectors is described above. The stereo amplifier has either two RCA connectors or one DIN, in which one of the extreme contacts is used for the right channel input (which one depends on the year of its release), and for the left one - the contact located between the contacts of the right channel and the common wire. If the TV is mono and the amplifier is stereo, connect the inputs (but not the outputs!) of the amplifier together.

Turn on the TV and if you have an amplifier. In the second case, first set the minimum volume on the amplifier. Then adjust it to the desired level.

note

Do not carry out the manipulations described above with transformerless and autotransformer TVs.

To connect to the system unit computer It is recommended to use a special cable. Most often, the whole difficulty lies precisely in the selection of suitable connectors.

You will need

• - video cable.

Instruction

Examine the video connectors present on the TV and video card computer. The latter device is usually endowed with VGA, DVI and HDMI ports. Older models of video adapters have an S-Video connector. Modern SHARP TVs are equipped with SCART, HDMI, VGA and DVI ports (rare). Choose similar or interchangeable ports.

Purchase a suitable video cable. Remember that there are special adapters that allow you to connect the following pairs of ports: VGA and SCART, VGA and DVI, HDMI and DVI. Naturally, when connecting a TV to a computer, it is wiser to use digital signal transmission channels such as DVI and HDMI. Connect your video card computer and the corresponding TV socket.

Turn on both equipments. Go to the TV settings menu, go to the item responsible for assigning the video signal reception channel. Specify the port to which you connected the cable.

Now configure the settings for the video adapter computer. First, determine which display (TV or monitor) will be the main one. Remember that it is on it that applications and programs will initially run. Those. if you want to run games on the TV screen, then this display must be assigned as the main one. Open the graphics card settings menu.

Select the graphic image of the selected device and activate the item "Make this display the main one." Now specify the second screen operation parameter. For rational synchronous use of the TV and monitor, it is recommended to select the "Expand this screen" item.

Sources:

• how to set up sharp tv

Tip 4: How to connect a computer to a TV with a cable

To use as a monitor for a computer, it is recommended to connect it via a special cable. The choice of its type depends on the availability of certain connectors in the video card of the computer and the TV.

You will need

• - DVI-HDMI cable.

Instruction

First, find a suitable pair of connectors through which you will connect. Naturally, to ensure the best picture quality, it is recommended to use digital channels. Computer video cards are endowed with HDMI and DVI ports that transmit a digital signal. Despite the fact that the DVI port is quite rare on modern plasma and LCD TVs, it can be replaced with an HDMI port using a special adapter.

Purchase a suitable video cable and adapter if needed. Connect your computer's video card. If you use the monitor and at the same time, then the first device can not be turned off. Now turn on both equipments. Wait for the PC operating system to load.

Open the settings menu. Find the item that lists the connectors for connecting video cables. Assign the signal receiving source to the port through which you have connected to the computer.

Now set up your computer. Open the Control Panel and go to the Appearance and Personalization menu. Select "Connect to an external display" from the "Display" menu. Now specify the display that will be the main one. To do this, select its graphic image and activate the "Make this screen the main screen" function.

Select the option to synchronize the monitor and TV. It is recommended to use the item "Expand screen". This will allow you to use your TV and monitor at the same time to perform different tasks. If you connected a TV to show, or you just want to use it, then activate the "Duplicate Screens" function. In this case, the same image will be displayed on both displays.

Related videos

Related article

Sources:

• how to connect computer and tv at the same time in 2018

Sometimes there is no MP3 function, but in a pocket player she is. But the player, unlike the music center, is not able to sound loud. To correct this shortcoming, it is necessary to connect the player and the center to each other.

Instruction

First, check your music system for front panel RCA input jacks labeled AUX or PHONO. Don't confuse them with headphone or microphone jacks - not only are they made to a different standard, they're designed for a different one.

If you did not find such sockets, then carefully, so as not to tear off any cables, turn the music center with the back wall towards you. You will surely find such nests there. Do not confuse them with other jacks, which can also be made according to the RCA standard.

Now take your unwanted headphones. Cut off the sound emitters from them. Purchase two RCA type plugs. Strip the wires that went to the sounder. One of the pairs consists of a colorless (or yellow) and red (or orange) conductors, and in the other, instead of a red or orange wire, there is a blue or green one. Connect all colorless or yellow wires to the ring contacts of the plugs, and the red (orange) and blue (green) wires to the pins.

Connect the cable to the player and music center. On the latter, select the mode called AUX or PHONO. If it has several inputs, they may be labeled AUX1, AUX2 and the like. When searching for an input, set both to player, and at the center a small volume. Later, set to player volume so that the center preamplifier is not overloaded, and then adjust from the center side.

To prevent the player's battery from being discharged, connect the device to a special power supply that emulates a USB port. You can also use a powered USB hub that is connected to the unit, but not to the computer. Remember that if the player is not powered by a battery, but by a battery, charging the latter in any way is not allowed. Using the music center in conjunction with the player does not exclude the possibility of switching it, if necessary, to other modes.

Tip 6: How to connect multiple TVs with one cable

There are several ways to connect multiple TVs to one cable. Their implementation depends on what type of signal reception you are using. At the moment, the most common signals are satellite and cable.

You will need

• Sharp knife, pliers, adapters.

Instruction

To make several TVs to cable, you will need to carry out several steps. First, you need to purchase a splitter - a device whose task is to distribute a signal to several outputs. Reminds a tee for sockets, only for coaxial cable.

Using tools, we connect the main cable to the tee, and then the cable from the TVs to the splitter. All inputs must be clamped well with pliers, since the quality of the signal depends on this. After the work done, we get a signal at all, while each of them can be different at the same time.

The second method belongs to connecting TVs to satellite. Everything is much more complicated here than in a cable signal. Mainly, you will need to determine how the receiver is connected to yours. At the moment, there are different types of connectors for connection. The most popular ports are VGA, DVI and HDMI. They are all different and you will not be able to directly connect the VGA cable to the HDMI port.

You may need to buy adapters to connect, because the splitters you need only exist with VGA and DVI ports. It should be noted that the use significantly reduces the quality of picture and sound transmission.

To carry out this operation from the tools, you will need the same knife and pliers. Also, if two or more TVs are connected to the same satellite cable, all TV receivers will show the same channel.

Sources:

• connecting multiple TVs

The HDMI interface provides for the transmission of not only images, but also sound. If the Sound over HDMI protocol is supported by both the signal source and the TV, there are no problems. But what to do at lack of support for this standard in at least one of the interfaced devices?

Instruction

You can send an audio signal from a source to a TV not only via the HDMI cable itself, but also via a separate analog cord. Find on TV RCA connector labeled Audio in. If there is more than one, use the one closest to the HDMI input. Connect it with a cable to the signal source connector labeled Audio out.

Some signal sources do not have RCA connectors, but are equipped with standard SCART connectors. To remove a sound signal from such a device, use a SCART-RCA adapter. In the absence of such an adapter, use a SCART plug, for which use the following contacts: 3 - sound output, 4 - common.

There are televisions that are unable to receive image data from one connector, and an audio signal from another. In addition, not only TVs are equipped with an HDMI interface, but also large monitors, in which there are no amplifiers and speakers. In this case, your existing component audio system or music center will come to the rescue. Find a free AUX connector (also RCA type) on the rear wall of the amplifier and apply a signal to it. If the source is stereo, connect it like this: white connector - left channel, red - right.

In the absence of an audio system, computer speakers will come to the rescue. Find a headphone jack on your source (do not confuse it with the microphone jack found on a DVD player with karaoke function) and connect speakers to it. If there is no headphone jack on the source, feed the signal from its line output to the preamplifier, and from the latter to the computer speakers. You can get by with a simple adapter, in which there is no preamplifier, but the sound will be noticeably quieter.

If you have TV repair experience and are familiar with the safety regulations, sound the signal directly to the unit's amplifier. Connect the common wires of the TV and signal source to each other. Find the circuit for switching on the microcircuit on which the amplifier is built. Apply a signal to the input terminal of this microcircuit through a capacitor with a capacity of about 0.5 microfarads.

Active and passive speakers

All acoustic systems can be divided into two main groups: active and passive. Each of the groups implies its own way of connecting to a computer. Active speakers have their own amplifier and direct speaker system. As you know, the output signal of a computer has a voltage calculated in units of volts, so such a signal must be amplified by an external amplifier. Such an external amplifier is contained in active acoustic systems. Passive speakers, on the other hand, have only the speakers themselves. In this case, you need to purchase an acoustic signal amplifier separately. Thus, it is the active speaker system that is most suitable for connecting to a personal computer.

Types of connectors

Depending on which speaker system is used, there are various options for using the connectors for connection. MiniJACK connectors are the most suitable in this situation. If your speaker system only has two speakers, then it has a single miniJACK output plug. Such speakers can be connected both to the system unit and to the laptop. If the number of speakers in your system is six, including a subwoofer, then the output of such a system should have three plugs for connecting each of the channels. Such an acoustic system cannot be connected to a laptop and to some types of system units that have only two audio input connectors without a special external sound card. Most personal computers have all three miniJACK input ports for connecting a 5.1 system. It often turns out that a sound system consisting of two speakers has two “bells” type plugs at the output. This connector is not suitable for connecting to a computer. In such a situation, you need to purchase an adapter from this connector to the miniJACK stereo connector.

Connection procedure

So, if you have a 2.1 sound system, the output connector of which is a standard miniJACK, then insert this plug into the corresponding connector on the system unit or marked with a headphone image. If your speaker system has a three-element input, then you need to connect it based on the color of each of the connectors. The orange plug must be inserted into the pink port of the system unit, signed with a microphone image. Insert the black plug into the socket located in the middle. Connect the green connector to the remaining space.

Modern computers in most cases come with a pre-installed operating system with working sound. However, when reinstalling Windows or after intervention by an inexperienced user in the system, problems with playing sounds may occur.

Before checking the status of the driver, check the status of the sound icon in the tray on the taskbar. Perhaps the sound is not playing because it is turned off in the operating system itself or the wrong channel is selected in the sound settings. Right-click on the sound icon and check all the presented sound options in sequence.

If the sound still does not appear, open the "Control Panel", go to "System and Security" and then to "System", select "Device Manager" in the menu on the left. In the list that opens, expand the item "Audio inputs and audio outputs". If the driver is installed correctly on your system, you will see installed audio devices in the drop-down list. If you could not find this item, expand "Other devices". Perhaps one of the unidentified devices will be your sound card.

Install . This can be done in several ways. You can use the built-in driver search, but very often it cannot help. If the system was unable to install the sound card on its own, you will need to download and install the driver from the Internet. Type in a search engine a query with the name of your computer and the required driver. It is best to download it from the official website of the computer manufacturer. After downloading, install the driver in the standard way and restart your computer. The sound should work.

If, after all the steps described, you still could not connect the sound on your computer, then most likely your sound card is faulty. It can fail for various reasons. Contact the service center or consult with a familiar specialist for help. You will need to replace the sound card with a new one yourself or with someone else's help.

Pay attention to all kinds of forums, blogs and sites, one way or another covering the work and your model. Sometimes the sound is because there is an error in the driver itself or in the operating system. Experienced users of a similar computer model will probably help you solve such a problem.

Decided to watch the downloaded movie not on a small monitor screen, but on a large television? Then you will need an HDMI cable, thanks to which the picture can be broadcast to a large screen, and the sound to good and powerful speakers.

However, when connected, you can periodically notice that the picture is transmitted, but the sound comes only through the computer speakers. What to do if there is no sound through the HDMI cable on the TV?

Correct connection

First, you need to check if you installed everything correctly. It often happens that there is no sound through HDMI to the TV because you have chosen the wrong cable or the wrong ports. The following errors often occur:

Incorrect ports were used by mistake

The cable is not the same

Usually, devices are written for what certain holes are installed in them. Therefore, in this case, it remains only to wish to be more attentive to such things.

As far as cables go, VGA doesn't transmit sound at all.

Setting up a computer

If you did everything right, but the sound on the TV via HDMI does not work, you should try to check if the computer considers the TV a system for playing sound. To do this, go to the “Control Panel” through the “Start” menu, find “Hardware and Sound” there and open the “Playback” tab in the “Sound” window. If you didn’t find anything there, the list is empty, then right-click to open the menu and turn on “Show disabled devices” and “Show remote devices”.

After that, your TV model should appear in the list. Click on it, and turn off the rest of the devices. This should help resolve the issue that audio is not working on the TV via HDMI.

If this method did not help

If you have done everything described above, but there is no sound on the TV via HDMI, it is worth trying to check the performance of the cable itself or the TV. It will also help to update the sound system drivers, which you can do on the official websites of the companies.

I hope we have helped you understand how to transfer audio through an HDMI cable.

Modern laptop computers have a digital audio-video output. You can use the cord to display video and audio content on your TV screen. With the help of a universal cable, you can watch movies, browse the Internet or listen to music through a large screen TV with surround sound. This is very convenient when the TV is on without the ability to connect to the Internet.

However, there is often a problem when connecting one device to another. Some do not have an image on the screen, others do not have sound. What to do in this situation? There is a solution, follow the clearly stated instructions and the problem will be quickly solved.

Why is there no sound on the TV when connecting hdmi

The HDMI cable carries both sound and video. That is, when you connect it to a PC and TV, the sound should come from the second device. So, the reproduced video or audio sounds more voluminous, richer and louder. Therefore, if no sound is observed when connecting the cord, it is worth figuring out what is the cause of the problem. After all, sometimes a seemingly insignificant problem can lead to serious malfunctions.

To solve the problem, most often, you just need to change the settings. In different PC operating systems, this is not so difficult to do. Even an inexperienced user of technology will be able to cope with this task. All you need to do is follow the instructions clearly and connect the cable to the connector correctly.

Remember! The interface of Windows 7.8 and 10 is slightly different, because of this, the settings can be located not only in the bottom panel, but also in the menu.

Checking the volume level

If when you turn on the computer and TV, the sound comes only from the first device. The first thing to do is check the volume on the TV. Sometimes owners of equipment can turn the sound on the device to a minimum or turn it off completely. Therefore, when playing files, there is no sound. You should also check the volume on the TV while watching channels. Perhaps it is faulty and the TV needs to be repaired.

Important! When setting up devices for viewing, they must be connected to each other and to the network. If the laptop does not see digital technology when connecting the cable, you just need to reboot the device and try again.

We install the driver

If there is no sound on the TV when connecting hdmi, the problem with the volume may be a driver malfunction. This happens extremely rarely. However, such a reason should not be ruled out. The driver may fail if it was previously installed manually. And by chance, when setting up, the checkbox was unchecked from the HD Audio component. In addition, the driver version plays an important role. If it is out of date, the audio may not play. In this case, you will need to update the drivers on the PC.

To fix this problem, you must follow these steps:

1. Find the task manager in the control panel. For a quick search, you can simultaneously press Win and X. Of all the options, we find the “sound and game devices” section.
2. If only a sound card is indicated in the settings, then the reason is in the driver. However, if there is also NVIDIA HDA in the lists, then in the menu (opened by pressing the right button) select the “Enable” item.

To install the driver and connect the desired device, do the following:

1. Open the official website of the video adapter manufacturer or a third-party page with drivers.
2. Find the latest driver version among the given options and download it to your PC.
3. After starting the installation, uncheck the automatic mode, this is necessary to control all actions.
4. In the manual installation, when the installation components are displayed, check the box next to "HD Audio Driver".
5. After completing all the steps, you need to close all windows and click on reboot the device.

Important! If you are a beginner and do not know how to manually install drivers, then the Driver Booster program will come in handy, it will simplify the process of installing and searching for firewood for a PC.

Replacing the playback device

How to switch sound on TV via hdmi? To change playback devices, you first need to connect an hdmi cable to two devices. After connecting, an image of the computer desktop should appear on the TV screen. Now you should check if the sound is enabled on the devices.

On the computer, open the menu with the right mouse button and find the sound control item. Then we find the item "Playback device". A window with available devices should appear on the screen. Among them we find a connected TV. Next, click on this icon with the right mouse button and select "Set as default" and click "OK" to confirm. After these steps, the sound on the TV should appear. When reconnecting the device to digital technology, you will not need to repeat the steps.

Hdmi not getting sound to TV? If you need to return the sound to a laptop or speakers. You will need to do the same steps, just choose not a TV, but speakers or a computer.

How to play sound on tv via hdmi? Today, multimedia output to the TV screen is the most popular way to comfortably view various content. There are no problems with the cable and it is convenient to use.

How to transfer sound from a computer to a TV? An hdmi cable is included with some TVs and home theaters. It can also be purchased at any hardware store.

How to output sound from a computer to a TV? To output sound to a digital device, follow the following algorithm of actions:

1. Disconnect all devices from power.
2. Plug one end of the cord into your computer and the other end into your TV.
3. Turn on two units.
4. Select the HDMI audio source in the TV settings.
5. Everything is ready for viewing and listening!

On a note: how to switch sound from computer to tv? you should not buy expensive cables, since the price does not affect the sound quality, it is better to give preference to trusted brands of the manufacturer.

How to switch sound from laptop to TV? In operating systems Windows 7,8 and 10, all settings are similar to each other. Item names may vary slightly.

How to connect a laptop to a TV with sound? When connecting a laptop to a TV, no additional settings are usually needed. Everything runs automatically. You just need to connect the hdmi cable and turn on the desired mode on the device.

No HDMI sound on TV? If the sound and image are not automatically displayed on the screen. Then you will need to manually configure the unit.

If you have Windows 7 or 8 installed. Then we find the sound icon in the taskbar and right-click on it. We find the column "Playback devices". If you are using version 10 of the operating system, the menu will have the item "Open Sound Options". After clicking, a window will appear where you will already need to find the “Sound Control Panel”.

No sound through hdmi to tv? In the window that appears, there should be a connected device. We select it by default. A green circle should appear next to the icon. After that, the sound should sound independently from the TV speakers. This action needs to be done only once during the first pairing. Subsequently, when you connect the cord, the sound will be automatically output to another device.

Sometimes the displayed window does not have the desired device icon. In this case, you need to find the item "Show disabled devices" and check the box next to it. After that, the connected TV should appear in the list. You will need to click on it and turn it on, and only then make it the default device.

In the new version of Windows 10, you can change the device type to output sound in a simplified version, right in the settings. In the control panel, you need to select the desired TV in the item "Select an output device" and "Intel Audio for Displays".

If even after all the actions the icon did not appear. Often the problem is in the cord itself, laptop or TV. If so, then you should look for the cause of the malfunction and solve it. It is best to contact a specialist if you have never dealt with such equipment.

Hdmi cable is a handy device that helps you to play a variety of laptop content on a big screen. User im very easy. It is enough to connect the two sides of the cord to the devices and turn them on. However, quite often users have a problem with sound or image. To display the image and sound you need only a little knowledge and skills to use the technique. And everything will work out. Don't be afraid to try!