The mouse does not work in all usb. The mouse clicks every other time what to do

There are a lot of reasons why a computer mouse may not work and they can be divided into 2 groups - software and hardware.

Software malfunctions include crashes caused by malware or viruses, damage to the mouse driver (control program), or freezing of the computer due to unsafe actions: opening damaged files or files "infected" by computer viruses (pictures, videos, music, etc.) ...

And to the hardware one can be attributed to the breakage of one or more wires in the mouse cable (and often they simply break due to repeated bending-unbending of the cable). As a rule, the wires break near the very body of the mouse. Also, hardware problems include poor contact in the mouse connector, debris getting into the mouse body, pouring coffee, tea, cola and other drinks into the mouse, which makes the mouse shorter and it can malfunction.

And also, if the mouse is already 8-10 years old, then mikriki (microswitches), especially the left one, often fail. The so-called bounce of contacts appears: you pressed, and instead of one clear signal, a burst of pulses went to the PC input, and the computer is often lost in guessing what you want from it - either open or close ... that you cannot select the text and make many attempts for this, or, look at the pictures, clicking, and they periodically slip through one or two, i.e. out of order.

To check if the mouse is to blame or not, you can plug in a known working mouse and see if the picture changes. If your guesses were confirmed, then you need to replace the mikrik, so do not rush to throw away your old mice without taking out the spare parts ... :)

If you recently bought a mouse, for example with a usb connector, stuck it in, but it does not work - the cursor is dead, then the reason may be the lack of necessary drivers in your Windows assembly.

So, let's take a closer look at all of the above typical cases of mouse malfunction. Most of these malfunctions can be fixed by yourself if you have at least a little skills in repairing and diagnosing computer hardware.

If the cause of the malfunction is malware: you need to scan the computer with an antivirus, if this is not possible, restart it in safe mode (Delete or F2 button) and run the scanner of the antivirus program, thus cleaning it. your computer.

It did not help - reinstall the mouse driver, the virus may have damaged it, if there is no driver, restore the operating system from an earlier copy.

If the mouse worked well and the cursor suddenly froze, it doesn't matter, just disconnect and reconnect the mouse connector, sometimes this technique helps. Or, restart your computer, it may just freeze - click the "Reset" button. There are various mechanical reasons, some object (debris) got into the mouse and closed the laser. And if you have been using the mouse for several years, then there is probably a lot of debris, various villi, hair. In this case, you just need to disassemble the mouse and clean it, wipe it with alcohol (just not the optics).

Prevention of the mouse is also very desirable to do, at least once every 2 years. When you turn the wheel, garbage is dragged in there and after 1-2 years there will be a mountain of it, which is why the mouse may also glitch.

If the mouse twitches, it works, but not - the reason for this may be an open or broken wires, as mentioned above. It is necessary to open the case of the mouse and ring the wire with an ohmmeter: on the connector and in the mouse itself, on the board - is there a break there. During the dialing, wiggle the cord, sometimes this is the only way to determine where and which wire has broken ...

Well, there are also the most commonplace reasons: when moving your computer to another place, pay attention - did you confuse the sockets - of the ps / 2 mouse with a round plug with the ps / 2 keyboard socket? With such varnishing, the keyboard and mouse do not work or the computer simply hangs ... The fact is that these slots are very similar to each other, and differ only in color. Mice are green, keyboards are purple, and the connectors must also be inserted according to the color.

As for the wireless mouse, there may be the following additional reasons: the batteries are dead, the receiver is out of order, the driver is damaged, etc.

Special problems arise with the USB mouse. The need for a USB mouse often arises when it is impossible to connect a ps / 2 mouse, i.e. the ps / 2 connector in the system unit broke, or, for some reason, you got a good and comfortable mouse, but here's the problem - it turned out to be with a usb connector.

Not all Windows assemblies (Windows installation discs) have drivers for a usb mouse in their kit, especially they are not in old assemblies of operating systems.

If USB mouse drivers are present, then connecting such a mouse is very simple - insert it into the USB connector, the operating system will detect the device and connect it, and display a message that the USB mouse is ready to work.

Otherwise, it is not always possible to understaff the Windows assembly, especially if you, as a system administrator, are not very ... The first thing to do for this is to go into the BIOS and set the permission for USB mouse connections. The second is to try to find a driver for a specific mouse model on the Internet and install it. And be sure to restart your computer after installing the driver.

USB mouse still not working? There is another simple and reliable way, but you need an installation disc with the drivers we need. No, an attempt to isolate the drivers from there and install them on your Windows will not lead to anything, at least I did not succeed, but updating Windows from this disk gave a result. After updating so. operating system, the universal driver was installed and the USB mouse worked without problems!

Of course, if you bought a 6-button mouse, then perhaps all the buttons will not work after the OS update, but only the main ones, then you will need to additionally install the driver of this particular mouse model.

The mouse buttons (left and right - mikriks) may still not work because dirt has got into the mikrik's case and they just stick. This is usually a grease that hardens over time and becomes sticky. In this case, you just need to clean them, rinse (wrap a cotton swab on a match, moisten them slightly with alcohol and rinse, wipe thoroughly), dry, and everything will function.

If you removed the mouse from the connector, inserted it and after that it refused to work - restart the computer so that it updates the data. In some cases, this helps.

And by the way, the mouse pad can also cause poor mouse performance, try changing it if the mouse does not work well. Although, when buying, you need to choose a mouse that would not be capricious to the rugs ... Often, after making prevention to the old mouse, it works better than the new one.

As you can see, fixing a computer mouse with your own hands, or making it work, is not so difficult, at least in most cases.

Sometimes users are faced with a problem when the mouse does not respond to clicks. Why can this happen? How is it proposed to deal with the task at hand? What features and nuances of the process are recommended to pay attention to? Sometimes factors that are not at all related to information can influence the mouse. Users can immediately take faulty hardware to system administrators for diagnosis. This is a logical decision, but don't rush. You can independently figure out why the mouse does not always respond to clicks, and even cope with problems without outside help.

Garbage

The first and fairly common cause of the phenomenon under study may be a banal clogging of equipment. If the mouse does not respond well to a click or does it every other time, it is recommended to check its cleanliness.

Clogging can be eliminated only on new equipment. If the device has already worked for some time, then in case of problems with the mouse, you can start cleaning the component. This is not so difficult to do. The result will not be long in coming - after the user removes all the dirt accumulated under the buttons, the mouse will work in full force.

Malfunction

But this is only one scenario. In fact, there are a lot of possible layouts. Mouse not responding to clicks? It is likely that the equipment is out of order. Relevant for any device - both new and already working for some time.

It is recommended to take the defective equipment to a service center. There the craftsmen will check the device and tell you if it needs to be repaired. If so, you can leave the mouse in the service center until the problem is resolved. Otherwise, you will have to completely change the input device.

Functional check

If a new mouse or one that has already been cleaned of dirt and dust does not respond to clicks, you can independently check its performance. To do this, it is recommended to connect the device to another computer, install the hardware drivers and make sure everything works.

This technique allows you to make visits to service centers with specific claims. Also, with the help of such a check, you can often understand the sources of problems and failures. What other scenarios are possible? What should you pay attention to in this or that case?

Jacks and connectors

Mouse not responding to clicks? What to do? For starters, don't panic. This problem is encountered by many users, often the source of trouble is a purely technical component, it does not pose any danger to a computer or operating system.

Alternatively, a damaged connector may be the cause of the problem with the mouse. The socket to which the equipment is connected is damaged, as a result of which the contact between the machine and the manipulator is established every time.

There is only one way out - to connect the mouse to another socket. This is the only way to fix the problem. By the way, the connection connector on the device may also be damaged. In this situation, it is best to purchase a new mouse. After all, connectors are usually not repairable. Or, after these manipulations, they still break, and very quickly.

Drivers

What if the mouse does not respond to clicks or does it every other time? There are a lot of options for the development of events. It has already been said that often all problems are technical. But there are exceptions.

For example, the following layout is typical for gaming mice. It's all about the drivers. This software is responsible for recognizing devices in the operating system. The old version or the complete absence of these applications can lead to the fact that the mice will work every other time. Or even find themselves among the equipment unknown to the computer.

In this case, you just need to install the drivers on your computer (usually they are attached to the mice) or update the existing ones. The operating system then restarts. Is there any progress? Then you don't have to worry. Does your mouse still not work to its fullest? We need to look for the source of the problem further. There are still many alternatives.

Touchpad

Only laptop owners face this problem. The mouse does not always respond to clicks or does not work at all, although there is a cursor? You can try to test the operation of the touchpad. If it functions normally, it is recommended to disable this component.

The thing is that some laptops and operating system assemblies do not support the simultaneous operation of the touchpad and mouse. Therefore, there is a hardware conflict. As a result, the mouse refuses to work normally.

As soon as the touchpad is disabled, the connected device will return to full functionality. And you can continue to use the mouse. By the way, do not be surprised if the problem arose suddenly - no one is immune from this.

CPU

But if the mouse does not immediately respond to clicks, then the problem may be different. For example, a slow response from information is sometimes attributed to high CPU utilization.

Why is this phenomenon observed on computers? There are a lot of options. Among the most common are the following:

• a large number of functioning programs;
• inconsistency of the computer with the system requirements of the operating system;
• viruses;
• long operation of the equipment without shutting down or rebooting;
• lack of hard disk space for normal operation of the OS.

In any case, you need to provide unloading to the processor. It is recommended that you close numerous programs running in the background and restart your machine. Better to give her a few hours to rest. Next, the user must resume trying to connect the mouse. The problem should go away.

Viruses

Mouse not responding to clicks? The virus, as already mentioned, is the wave of the real cause of the arising hardware problem. Any computer "infection" can lead to this phenomenon.

What should be done in this case? We need to try to cure the computer. If the problem is observed on a laptop, the touchpad will save. With it, you can easily control the computer and the cursor. The anti-virus system will find and disinfect potentially dangerous files. If this fails, the user will be prompted to delete the document.

As a rule, when the cursor cannot be controlled at all, the computer is taken to a service center. There, the system will quickly be cured of all viruses without causing any damage to the owner's data.

Incompatibility

If the mouse does not respond to clicks, you should pay attention to the system requirements. The point is that all modern equipment has certain requirements for a computer. The discrepancy between them makes it impossible for the device to work. Or it will be unstable.

When incompatibility with the operating system is found, you can solve the problem in several ways. Either the user changes the OS or the connected equipment. The second option is most often encountered in practice. It is recommended to pay special attention to compatibility issues for owners of "Windows 10". A lot of hardware conflicts with this operating system. Therefore, there is no need to be surprised that Windows does not respond to mouse clicks.

What to do in this situation? It has already been said: either change the connected equipment, or change the operating system. How exactly to proceed? Everyone decides for himself.

Power supply

This is the last reason why the mouse connected to the computer is not responding. All the fault of the power supply settings. This problem is most common on laptops.

As practice shows, after that the work of the mouse is getting better. In fact, everything is not so difficult. It is enough to enumerate all possible options. This is the only way to understand 100% what the matter is. You shouldn't rush to buy new equipment either. It is likely that you can do without it.

If the user doubts his abilities, you can take the computer along with the faulty equipment to a service center. There they will quickly help not only diagnose, but also fix any computer problem. How exactly to proceed? The final decision always rests with the user!

Users often encounter problems that arise when working with a computer. One of these problems is the computer mouse stops working. What could be the cause of the malfunction, we will analyze in the article.

Types of mice

Computer mice can be classified according to these criteria.

Causes of malfunctions

There are many reasons why the cursor does not move and the computer mouse stopped working, but they can be divided into two groups: hardware and software.

We will refer to hardware:

We will classify the software as:

1. Malfunctions related to the device driver.
2. Intentional disabling of the mouse by malware.
3. A conflict between the mouse utilities and other software.
4. Operating system malfunctions that created a chain of problems that led to the inoperability of the device.

Trouble-shooting

Before taking any major troubleshooting steps, check:

Important! If the device is not recognized (device descriptor request failed) or your mouse is in the "Other devices" section, the solution to the problem is described in detail in this.

Wired

If you checked the mouse by software, and when connected, the cursor does not move or does not move correctly, the problem is in the hardware part of the device. To eliminate:

Wireless with USB transmitter

If you have a wireless mouse connected to a PC via a transmitter, go through and read the publication about. Nothing helped? Try the following:

Important! Software installed for another product (mouse, wireless keyboard, touchpad, sensor) may conflict with the wireless mouse. We recommend that you remove the utilities, restart your computer and check the operation of the manipulator.

Bluetooth

If you are using a bluetooth pointing device and the cursor stops working:

1. Turn off, replace batteries and turn on the device.
2. Check the operation of the transceiver (reboot it, connect another device to Bluetooth).
3. Check the operation of the driver for the Bluetooth transmitter.
4. If necessary, roll back to a previous version or reinstall the driver.

Wi-Fi

If the Wi-Fi mouse cursor stops working or begins to "twitch", the reason may be in the protocol that the router uses. This is because the device and the router are operating in the same 2.4 GHz band. To solve this problem without replacing the mouse:

1. Go to the router settings in the Wi-Fi section.
2. Change the protocol to 802.11g, and save the changes (experiment was carried out on D-Link Dir-615M).
3. Reboot your router and turn off / on your mouse.

Important! Changing the protocol is suitable if the Internet speed is not higher than 25 Mbps.

Touchpad

First of all, check if the touchpad is enabled on the laptop. We recommend that you familiarize yourself with the information on setting up the touchpad on this one.

The touchpad can be disabled by software. Go to BIOS:

If turning on does not help and everything is in order with the driver, then there is a malfunction in the hardware. This could be:

• damage to the touch panel;
• disconnecting the loop.

Advice! If you are confident in your abilities, you can check the attachment of the touchpad cable. It happens that during transportation, it jumps out of the connector to the motherboard.

If the tips in the article did not help you find the mouse connection problem,. Describe your problem in detail, we will try to find the answer together.

If the mouse is connected to the system unit via the PS / 2 connector (a round socket on the rear panel, next to which there is sometimes a mouse image), it cannot be connected or disconnected "hot", i.e. when the computer is on. A short circuit may occur, to which the PS / 2 ports are very sensitive.

If you see that the cursor is not moving and the system is not responding to mouse keystrokes, turn off the computer using the keyboard. Press Ctrl + Esc or Win to open the Start menu. Use the Down Arrow and Enter to select the Shut Down command and confirm the shutdown request by pressing OK.

Disconnect the mouse cable from the port and carefully, trying not to bend the pins of the electrodes, reconnect - the problem may be a loose connection. Turn on your computer. If the mouse works, then you did everything right.

USB ports are hot-pluggable. However, if the mouse connected via USB does not work, nevertheless turn off the system unit before

If the problem persists, test the mouse on a different computer. If the cursor moves and the keys work, there may be a bad port on your system unit or there is a software problem.

To identify the source of trouble, alternately connect known working mice to the computer through the PS / 2 and USB ports. Usually no special drivers need to be installed - standard Windows utilities are also suitable. If none of the devices work, it is most likely a software problem.

Using the Win keys, directional arrows, Tab and Enter, from the "Start" menu go to the "Control Panel", activate the "System" icon, in the "Hardware" tab, click "Device Manager", then open the list "Mouse and other pointing devices" ... Use the Shift + F10 combination to bring up the context menu and select the "Delete" command, then reboot. The system detects a new device and re-installs the drivers on it.

If you have connected new hardware or installed a new program, the cause may be a hardware conflict. Login to the system in safe mode when it boots in minimal configuration. To do this, restart your computer and press F8 after a short beep. Select "Safe Mode" from the boot modes menu. Answer “Yes” to the system's request to continue working in this mode. If the mouse works fine, remove the new hardware and software. Boot into normal mode.

If System Restore is enabled on your system, try selecting Last Known Good Configuration from the Mode Selection menu. The system will offer you several system restore points to boot. Pick the one that is closest to the time the problems started. If the attempt fails, try a different date.

You can enter the system recovery mode in a different way. When rebooting, select the "Safe Mode" option, but when asked by the program to continue working, answer "No". After that, you will be prompted to select a restore point.

Windows OS has a built-in "Troubleshooter". To launch it, go to the "Control Panel" using the keyboard and expand the "Mouse" icon. Go to the "Hardware" tab using Shift + Tab and press "Diagnostics". Use the "Next" button to run the diagnostics. Press Shift to select an option for answering system questions. Perhaps, as a result, it will be possible to find out the reason for the inoperability.

If these methods do not help, check your computer for viruses. Download the free AVZ4 program and deploy it on a USB flash drive. Press Win + R and enter the command F: \ AVZ4 \ avz.exe in the "Open" window, where F: is the name of the removable disk in the system. Start scanning.

If the mouse works, but freezes from time to time, right-click on the free space on the screen, select the "Properties" option and go to the "Options" tab. Click "Advanced" and select the "Diagnostics" tab. Move the "Hardware acceleration" slider one notch to the left and confirm with OK.

Regardless of what type of manipulator is used, sometimes problems may arise associated with the fact that the mouse cursor does not move, but the mouse works. What are the reasons and how to eliminate the consequences of the problem, read on.

The mouse cursor does not move, but the mouse works: reasons

When starting to consider the reasons, you need to focus on the separation of these devices by type. The easiest way to troubleshoot problems is when standard devices are used that are connected to computers and laptops through a special plug or through USB ports.

In the case of wireless pointing devices or non-standard models designed for games, there can be many more reasons why the mouse buttons work and the cursor does not move.

However, among the most common problems, the following can be noted:

• surface contamination;
• incorrect connection or turning on of the device;
• incompatibility and other problems with the USB port;
• incorrectly installed, missing or outdated drivers;
• exposure to viruses.

The mouse cursor does not move, but the mouse works: what should I do first?

In the simplest case, you first need to inspect the bottom surface of the device. If there is dirt on the underside, it must be removed. Very often, precisely because of this, it is impossible to perform any actions with the movement of the cursor on the screen.

In some cases, when the mouse cursor does not move, but the mouse works, the problem may be related to a short-term software glitch. In this case, you can try to reanimate the mouse by simply rebooting the entire system. Please also note that if there is an inoperative device, the BIOS will not issue warning signals.

In the case of wireless devices, the problem that the mouse cursor does not move, but the mouse works, may be due to an uncharged battery. It needs to be replaced. Another reason is the incorrect inclusion of the device. In many manipulators, besides the fact that you should turn on a special button or power slider on the lower surface (on the back side), you also need to press the left mouse button (this also applies to the sleep mode, which the manipulator enters into when the computer or laptop is turned off). For Bluetooth devices, make sure that the corresponding module is active. For Wi-Fi, sometimes you may need to log into the router and change the protocol to 802.11g.

Sometimes the reason that the mouse cursor does not move, but the mouse works, may be that it is connected to the wrong USB port. As a rule, any modern computer or laptop has several such USB 2.0 and 3.0 connectors. This also needs to be taken into account.

Finally, it is quite easy to test the functionality of a device of any type by connecting it to another computer terminal. If it works, then the problem is with the user's system. Otherwise, drivers may be the main problem.

Driver change

For standard devices, the system installs drivers on its own. But for some gaming mice, they come complete with the manipulator itself, and you need to install them manually. In such a situation, the drivers need to be reinstalled or updated. But what to do - after all, the cursor does not move?

And this is where the knowledge of entering commands and using the switch between different functions, applications and sections of the system using the keyboard will come in handy. For quick access to the "Device Manager", you need to use the "Run" (Win + R) console call, in which the devmgmt.msc command is entered, after which, in the manager itself, movement is carried out using the arrow buttons and tabulator. You can also use the "Start" menu, which opens with the Win key. Calling functions and confirming in the form of pressing buttons are made with the enter key, and sometimes the Esc key is used to cancel actions.

When reinstalling the driver, the system will need to specify its location (removable media or a folder on your hard drive), rather than using the recommended installation from the Windows database. At the end of the driver integration, it is advisable to reboot the system, although this is not always required.

Conclusion

It remains to be said that the cause should be looked for solely taking into account a certain type of device. But in most cases, if the mouse cursor does not move, but the mouse works, and the problem is not related to software glitches or physical damage to the mouse itself (or violations of the integrity of the connection cord), at least one of the above tools will restore the manipulator to work. Virus issues have not been touched upon here, as security should be the first concern for each user.

A computer mouse is an ingenious device that was created almost in the middle of the last century. Without this simple thing, we would not be able to fully manage a computer and a laptop, because a replacement for it as such simply does not exist. Therefore, when it stops working normally or simply "glitches", it is necessary to somehow solve this problem. Today I will talk about why the mouse may not work and what actions must be taken to reanimate it.

Causes of problems and their solutions

• To understand if the device really does not work or if the problem lies with your computer, you need to connect it to another PC or laptop. If the mouse turns out to be fully functional, then try inserting it into a different port on your main computer - it is known that USB ports are often "buggy", and rearranging the plug will work. If you have a PS / 2 mouse, I recommend purchasing a special PS / 2 / USB adapter so that you can use the device through any USB port. The PS / 2 connector itself may not work, hence the problem.

• The next step is to take a close look at the mouse, in particular, at the LED. If it lights up, but the device does not want to work, then the matter is probably in the "software". To get started, just try restarting your computer (and don't laugh, this works in very many cases) and if it doesn't help, then try installing the driver specifically for your device. To do this, go to the manufacturer's official website and download the required drivers.

• In some cases, a problem may arise after installing one or another software - probably, there is a conflict in the system, as a result of which the mouse stops responding to any actions. Often, something similar happens when viruses get on your computer. What to do in such situations? It is recommended to boot the computer in safe mode and check the performance of the "rodent". If it works, then either remove the installed software, or roll back the system to an earlier date. And of course, don't forget to scan your PC for viruses.

• Interestingly, PS / 2 mouse users are more likely to encounter this problem. Why? The fact is that the plug used in such devices is not perfect. It consists of many contacts (such as pins) that tend to bend. For example, you removed the plug from the port and put it back in, after which the mouse stopped working. Some of the pins appear to be bent and need to be returned to their original position. This can be done, for example, using the most ordinary tweezers or something sharp (even the most ordinary ballpoint pen may work for you). USB mice are completely devoid of this problem due to a much more sophisticated system.

• In theory, the wire could be damaged. This rarely happens, since it is not subjected to strong mechanical stress. Still, pets can chew through the wire quite often. So, we carefully examine it for external damage, and if you did not find any, then we do the following: we take the mouse in our hands and begin to move the wire. If the indicator (LED) starts blinking at this moment, then, apparently, the matter is really in the wire. It needs to be replaced, although in most cases it will be cheaper to purchase a new rodent.

• In case you are using a wireless mouse, the most common cause of the problem is a dead battery, as well as a problem with the Bluetooth receiver driver.

• Now let's move on to the buttons and the wheel. If we talk about buttons, then the inoperability of one of them or both is most often associated with a mechanical problem. In theory, it is possible to re-solder the microcircuit, but this is usually economically disadvantageous - a new mouse costs the same amount, if not cheaper. But if the wheel sticks, then it makes sense to disassemble the device and clean it from dirt - hair and other "charms" that interfere with its operation are wound on the wheel. Try to clear the wheel, everything should be fine.

• Continuing the conversation about buttons, one cannot fail to mention that for additional buttons that are located on the sides of the mouse (they are usually used in games), you need to install other drivers that come with the device. They can also be downloaded from the manufacturer's website.

• In the event that the mouse still works, but not quite adequately, for example, it jumps from side to side, then dirt may be to blame for this (in the case of ball-point mice, this can be said to be normal), as well as problems with settings. If in the first case it is enough to clean the device from dirt, then in the second you need to play with the settings. For example, try adjusting the sensitivity of your gadget. How to do it, me.

• If problems with inoperability occur in games, or rather, the mouse does not work in a specific position, then 99% of the problem lies in the settings of the game itself.

What cannot be done?

• If you recently purchased a mouse that is under warranty and it stops working, then do not try to repair it yourself - this may result in a loss of warranty.

• You can damage the device if you start repairing it yourself without the necessary skills. Therefore, I recommend contacting specialists with similar problems.

Finally, I will say that in most cases it is quite easy to solve the problem yourself, for this you just need to find the cause of the problem, which most often lies in the "software". If you have any questions, please contact.

You may also be interested in

Sometimes users are faced with a problem when the mouse does not respond to clicks. Why can this happen? How is it proposed to deal with the task at hand? What features and nuances ...

Sometimes a Windows 10, 8 or Windows 7 user may face the fact that his computer (or laptop) does not see the mouse - this can happen after system updates, hardware configuration changes, and sometimes even without any explicit previous actions.

This tutorial explains in detail why the mouse doesn't work on a Windows computer and what to do to fix it. Perhaps during some of the steps described in the manual, the manual will come in handy.

The main reasons why the mouse does not work in Windows

First, let's talk about the factors that most often turn out to be the reason that the mouse does not work in Windows 10: they are relatively easy to recognize and fix.

The main reasons why a computer or laptop does not see a mouse are (further they will all be discussed in detail)

1. After updating the system (especially Windows 8 and Windows 10) - problems with the operation of USB controller drivers, power management.
2. If this is a new mouse - problems with the mouse itself, the location of the receiver (for a wireless mouse), its connection, the connector on the computer or laptop.
3. If the mouse is not new - an accidentally removed cable / receiver (check if you haven't already) a dead battery, a damaged connector or mouse cable (damaged internal contacts), connection via a USB hub or ports on the front of the computer.
4. If the motherboard was changed or repaired on the computer - disconnected USB connectors in the BIOS, malfunctioning connectors, lack of their connection to the motherboard (for USB connectors on the case).
5. If you have a special, creepy mouse, in theory it may require special drivers from the manufacturer (although, as a rule, basic functions work without them).
6. If we are talking about a fully working Bluetooth mouse and laptop, sometimes the reason is accidental pressing of the Fn + flight_mode keys on the keyboard, the inclusion of the "Airplane" mode (in the notification area) in Windows 10 and 8, which disables Wi-Fi and Bluetooth. More details -.

Perhaps already one of these options will help you figure out what is the cause of the problem and correct the situation. If not, try other methods.

What to do if the mouse does not work or the computer does not see it

And now about what exactly to do if the mouse does not work in Windows (we will talk about wired and wireless mice, but not about Bluetooth devices - for the latter, make sure that the Bluetooth module is turned on, the battery is "intact" and, if necessary, try to pair again devices - remove the mouse and join it again).

To begin with, there are very simple and quick ways to find out if the matter is in the mouse itself or in the system:

These are the basic methods that can help when it's not about Windows. However, it often happens that the reason is precisely in the wrong operation of the OS or drivers, often found after Windows 10 or 8 updates.

In these cases, the following methods can help:

1. For Windows 10 and 8 (8.1), try and then rebooting (exactly restarting, not shutting down and turning on) your computer - this may help.
2. Follow the steps from the instructions, even if you do not have such codes and unknown devices in the manager, errors with a code or messages "USB device not recognized" - they can still be effective.

If none of the methods helped - describe the situation in detail, I will try to help. If, on the contrary, something else worked, not described in the article, I will be glad if you share in the comments.

Hello everyone! In this short post I would like to tell you about why the mouse may not work on the computer. The other day, this happened to me, later the mouse worked again for me and I decided to write an article about it. There are several ways to do this. Well, let's get started.

Method 1 - restart your computer

Most often this happens due to a failure of the operating system or drivers. One way to get your mouse back on line is to restart your computer. In my case, it helped, the mouse worked again for me. Therefore, the most efficient and convenient way is to restart your computer.

Method 2 - checking drivers

If method # 1 did not help you, then you need to check the drivers. The keyboard will help you to do these actions, for this you use the buttons: Tab, windows, shift + F10, arrows. Go to My Computer => Properties => Device Manager => Mice and other pointing devices. If you see an exclamation mark next to the words “mice and other pointing devices”, it means that you must reinstall the drivers on your computer.

Method 3 - check the operation of the mouse itself

If both of the above methods did not help you, then you need to make sure that your mouse works at all. To do this, you need to plug the mouse into another USB port. If you have another computer, you can use this method or check the performance of the mouse with your friends. If your mouse does not work even then, then you will have to spend a little money.

Well, this is where I end my post. I hope my advice helped you get your mouse back to work. Most often, method # 1 helps. This is to restart the computer. At least in my case, it helped. On this I say goodbye to you. Bye everyone!

Sincerely, Albert Karamov.

We are used to interacting with OS Windows using a mechanical manipulator, simply a mouse.

The mouse allows you to almost not use the keyboard, because using the mouse you can:

• manage system processes;
• perform almost any system operations;
• perform the functions of a context menu.

But what if the mouse suddenly stopped working? What if the manipulator does not respond to commands, twitches, does not perform the actions we need?

Mouse does not work: what to do

Physical malfunctions

1. You need to check through which connector the mouse is connected to the system unit. This could be a circular PS / 2 inlet. In this case, it is better not to connect the connector when the computer is working, otherwise a short circuit may occur.

2. If the OS does not "see" the mouse, you need to turn off the computer without its help. To enter the Start menu, use the Ctrl + Esc combination or the Win button. "Down arrow" and Enter, select "Shutdown", press the "OK" button.

3. Often the reason lies in the disappearance of the contact. To check this, unplug the mouse and plug it back in. Now turn on your computer. If everything works, the problem is resolved.

4. If the mouse is connected via the USB port, then it can be connected without turning off the computer. If reconnection does not help, it is better to turn off the system unit, and then try another USB input. It happens that the mouse is not connected through a different connector, then you need to connect it to some working PC and test it.

In the case when a 100% working computer “sees” the mouse, it is possible that the connector on your PC is broken or there is a problem with the software. To check the operation of the connectors and inputs, you need to connect other working mice to the PC (it is better to check both inputs - PS / 2 and USB).

Software errors

If all procedures with connectors and inlets, as well as other physical parameters, do not help, then the problem is probably in the software. Enter the "Control Panel". For this:

1. Press the Win key and then the Directional Arrows, Tab and Enter, in the Start menu, look for Control Panel.
2. Next, find the "System and Security" icon - the "Hardware and Sound" tab.
3. Select "Device Manager".
4. Expand the Mouse and other pointing devices list through Device Manager.
5. Then turn on the Shift + F10 menu.
6. Then "Delete".
7. Restart your computer (below we have presented this process in the screenshots).

When turned on, the system will re-install the drivers on the newly detected device (that is, on the same mouse that we removed in the previous step).

Hardware compatibility errors

What if you installed new programs, connected new hardware, and the mouse stopped working. In such a situation, a hardware conflict is possible.

To fix the situation, you need to enter the system through safe mode. To start Safe Mode, restart your computer and press F8 when you hear a beep.

Select "Safe Mode". Then click “Yes”. If the manipulator is functional, you need to remove recently installed programs. Now turn on your computer normally.

Also, the problem of hardware incompatibility can be resolved by selecting “Load Last Known Good Configuration” in System Restore. Here you need to set a restore point closest to the start date of the difficulties. If nothing happened, then choose a different time.

It is also possible to enter "System Restore" through "Safe Mode", then to continue working you need to click "No", then select a restore point.

Running Troubleshooter

Windows has a "Troubleshooter" module. You can take advantage of its capabilities.

Using the keyboard, you should find the "Control Panel", the "Mouse" icon, the "Hardware" tab. Shift + Tab keys switch to "Diagnostics". Then "Next". To respond to system requests, you must use the Shift key. Diagnostics can help identify faults.

Other probable problems

If all else fails, then scan your PC for viruses. You can install AVZ4 or. Antivirus software can run on a flash card.

True, you will have to prepare such a USB flash drive in advance, which is almost unrealistic. However, those antiviruses that are already installed must be run for verification!

IMPORTANT: to search for malicious programs and viruses that AVAST does not detect, use a super-strong antivirus - here it will 100% find harmful programs!

After checking, the mouse can respond to commands, but hang. In this case, right-click to open the context menu, select "Properties", the "Parameters" tab, then click "Advanced" and select "Diagnostics". Now you need to move the "Hardware acceleration" slider one designation to the left, then "OK" to confirm.

The above methods of reanimating the mouse will not help if the matter is in the computer itself or if the mouse is simply broken.

In this case, contact a service center to identify problems with the computer, or buy a new mouse if the old mouse cannot be repaired. The mouse is not too expensive, and the budget cord models are even cheaper….