At present, Russia (like other countries of the world) is switching to digital broadcasting (DVB-T and DVB-T2). Russia started digitalization much later broadcasting, due to which she passed the stage of the first DVB-T standard and immediately introduced a new, more advanced DVB-T2 standard. In this case, MPEG-4 compression is used instead of MPEG-2 (most European countries). MPEG-4 compression allows, with low signal quality loss, to provide a significantly lower bit rate, which allows a much larger number of programs to be placed in one package (multiplex) and even to use high definition television (HDTV).

What gives the consumer the transition from the traditional analogue broadcasting, familiar to us, to the DVB-T2 standard?

Excellent signal quality. The digital signal has a very characteristic feature- either it has an excellent (original) quality, or it does not exist at all. The analog signal has a smooth transition from excellent to Bad quality reception.

Increased number of channels with the same frequency resource. Physically, this means that in one physical channel with a bandwidth of 8 MHz, several programs are simultaneously broadcast (from 6 to 18). A set of programs located in one physical channel (8 MHz) are called a "package" (they are, as it were, "packed" into one single digital stream) or a "multiplex".

Simplified admission conditions. Physically, this means that where previously analogue channel reception was difficult or impossible, DVB-T2 reception becomes a reality. DVB-T2 signals are perfectly "read" when they are very noisy. This is their feature.

Absence of repeated pictures on the TV screen... A very important factor in practice. Now, the presence of multiple reflected signals does not affect the reception quality in any way (of course, within reasonable limits).

The ability to broadcast high definition channels (HDTV). As a rule, such programs are necessarily present in any of the broadcast packages. Anyone who has seen the quality of HDTV signal, he no longer wants to watch even the quality of DVD signal from DVD players. HDTV quality can really be enjoyed. There are no fundamental restrictions on the broadcasting of 3D programs (at present, there are few interesting content in 3D).

Reception of programs not available on satellite broadcasts. As already noted, satellite (SAT) broadcasting is characterized by the feature that with this satellite far from all the desired programs are broadcast. In addition, SAT broadcasting is paid, while state broadcasting is free, which also plays an important role. It is also important to add that the image quality at DVB-T2 broadcasting is much better than SAT broadcasting due to increased speeds transmission.

The ability to receive on the move. Standard DVB-T / T2 was formed initially with such a characteristic feature. Now it can be taken reliably and stably in a car, plane, train, etc. The maximum speed of movement depends on the broadcasting format of the DVB-T / 2 signal and usually lies in the range of 220-440 km / h. Thus, almost every motorist can now install a small-sized flat tv(battery powered) and enjoy high quality digital signal reception (reliable reception is observed even in narrow tunnels).

Moscow is DVB-T2 channel broadcast room 30, room 24 and room 34(see frequency grid). Digital packets broadcast as demon pay channels standard definition (SD) and paid high definition (HD) channels.

Our company will select for you (and, if necessary, install) a small-sized antenna for quality reception DVB-T / T2 signals.

We can also supply you with an economical tuner (STB) DVB-T2 - HDTV / MPEG-2/4 for receiving digital channels.

If necessary, we can dilute digital signal for several rooms (according to the number of STBs), or already received demodulated signal for several rooms (no additional STBs are required, but all TVs will only show identical programs received by a single tuner).

The most economical way is for you to install one or another set recommended by us for DVB-T2 broadcasting. At the same time, only 1 UHF range antenna.

Moreover, if you already have a collective cable network, then we will help you "mix" digital packages v cable network without any harm to you. Naturally, in your home network we can also mix in satellite (SAT) broadcast signals. In this case, all signals will be broadcast over one single cable.

There are many options for solving a particular problem, and everything is determined by the wishes of the Customer and his financial capabilities.

Free of charge digital channels are becoming the new norm by providing unique quality services. DTV is confidently striding across the country, covering not only Moscow, but also many other large regions. And all because the century modern technologies implies the most rational and competent use of innovative technical means... Such as the transmission of image-sound using digital signal programming on specific digital frequencies... In this case, the quality is transferred to the highest level absolutely not being subjected to all kinds of interference. Due to the expansion bandwidth there was a chance of viewing more programs of a wide variety of topics. The exact lists are being specified for each individual region covered by the federal broadcasting of TsETV, but now you can connect to the most advanced television, which is improving its services every season.

To watch free terrestrial channels on the territory of the Moscow Region, you will need to purchase and install an individual UHF antenna. Home tv must certainly be equipped digital tuner DVB-T2 (digital TV standard). For older models, you need to buy a set-top box that supports MPEG 4 video compression, as well as the Multiple PLP mode. After that, it is enough to professionally connect the equipment and set up terrestrial DVB-T2 channels that are broadcast from the Ostankino TV tower. The coverage area today is almost 95% of the Moscow region.

The ordered list of TV channel frequencies is designed to make setup as easy as possible, including older non-HD TVs. Today, open digital channels are broadcast without subscription fee, in addition to the first, the second and third multiplexes were launched with the ability to view 10 programs in each, now there are already 20 of them. It is worth remembering that the equipment of the first generation DVB-T format unable to support new standard, it was officially disabled in early 2015. With a terrestrial antenna and a DVB-T2 tuner at your disposal, you can easily connect big package news, entertainment, sports, music programs.

The first multiplex of digital terrestrial TV
Channel logo	Name	Number	Frequency	genre	Video format	Audio format
	30	546 MHz	Federal	MPEG4	MPEG2
	30	546 MHz	Federal	MPEG4	MPEG2
	30	546 MHz	Sport	MPEG4	MPEG2
	30	546 MHz	Federal	MPEG4	MPEG2
	Petersburg - 5 channel	30	546 MHz	Federal	MPEG4	MPEG2
	30	546 MHz	Federal	MPEG4	MPEG2
	30	546 MHz	news	MPEG4	MPEG2
	30	546 MHz	Child	MPEG4	MPEG2
	30	546 MHz	Russian public television	MPEG4	MPEG2
	30	546 MHz	Federal	MPEG4	MPEG2
	30	546 MHz	Radio	-	MPEG2
	30	546 MHz	Radio	-	MPEG2
	30	546 MHz	Radio	-	MPEG2
Second multiplex of digital terrestrial TV
	24	498 MHz	Federal	MPEG4	MPEG2
	24	498 MHz	Religion	MPEG4	MPEG2
	24	498 MHz	Entertaining	MPEG4	MPEG2
	24	498 MHz	Entertaining	MPEG4	MPEG2
	TV3	24	498 MHz	Entertaining	MPEG4	MPEG2
	24	498 MHz	Entertaining	MPEG4	MPEG2
	24	498 MHz	Military patriotic channel	MPEG4	MPEG2
	24	498 MHz	CIS channel	MPEG4	MPEG2
	24	498 MHz	Movies	MPEG4	MPEG2
	Muz TV	24	498 MHz	Music	MPEG4	MPEG2
The third multiplex of digital terrestrial TV It has not yet been officially launched, so the channel list is displayed on separate page with broadcast schedule

Information obtained from open sources and is relevant at the beginning of 2019. As the grid changes, the data will be updated.

Article 37. Erotic publications

×

Law of the Russian Federation of December 27, 1991 N 2124-1 (as amended on July 13, 2015)
"About funds mass media"

The distribution of specialized radio and television programs of an erotic nature without signal coding is allowed only from 23:00 to 4:00 local time, unless otherwise established by the local administration.

For the purposes of this Law, a mass media specialized in messages and materials of an erotic nature means a periodical or a program that, in general and systematically, exploits an interest in sex.

Retail sale of media products specializing in messages and materials of an erotic nature is allowed only in sealed transparent packages and in specially designated premises, the location of which is determined by the local administration.

TV), it's time to move on to the most important part - at the construction site digital television ... How to set up digital TV with your own hands? Read on for more details.

I will show using the example of a receiver Mystery MMP-71DT2 and like me, his software is exactly the same as Rolson's. If you have a different set-top box, the principle will be the same, but you may have to look at the instructions.

How to connect everything

First, we connect antenna to the receiver, and the receiver to the TV... Preferably through, so the image quality will be as clear as possible. If there is none, then through the usual "tulips", they come complete with a prefix, as a rule. We look at the connectors in the instructions, you get something like that. If the antenna is with an amplifier, first turn it off, then you can always turn it on.

We launch all this economy, set-top box, antenna, TV. We select the required video input. If everything is done correctly, then you will see start menu, of this type:

How to set up digital TV through "autosearch"

By default, the set-top box is not configured for anything, and you yourself will need to catch the channels that are transmitted in your region. The easiest way is to run autosearch.

After launching autosearch, the set-top box will think for a long time, and must find something in the end. Important: since everyone is transmitted on the same frequency, then you will catch channels not one at a time, but immediately in batches of ten. So be patient. If in analog TV channels are caught one by one, then it may take several minutes, and the set-top box will search. But then all 10-20 channels will pop up at once.

After the search is over, the set-top box will offer you to add the found channels. If you find all 20 pieces - congratulations, the process is complete!

List of tuned channels, "TV Guide" function

How to check the signal quality when setting up digital TV

Check that the signal is strong enough and everything is set up well.

It's very easy to do. You must have an INFO button on your STB, triple tap displays data on the quality and intensity of the signal. Look in the instructions, it may have a different name, but it will do the same:

The higher the signal, the better. Optimally - from 60% onwards

If both indicators are high, above 60%, everything is fine.

Check it out on both multiplexes, say, on Channel One and on TNT.

Since different multiplexes are transmitted, you can catch the first one well, and the second one bad, or vice versa. Your task is to turn the antenna so that both are well caught.

But in practice it happens a little differently. For example, you can catch takes. When identical channels will occupy several places at once. It seems not critical, but annoying. How to treat me.

What to do if you caught takes, or nothing was caught

The second option is when not everything was caught, or nothing was caught. Fine tuning and manual mode will help us here. We read about it. However, if you live in a city, and there are towers near you, then in 90% of cases, autosearch is enough for you.

Summarizing

As you can see, setting up a dvb t2 digital television with your own hands is not a complicated matter. And you certainly shouldn't call a master who will do the same for you for a thousand rubles)

A package of channels broadcast on one frequency is called multiplex... The number of channels in one multiplex can be from 1 to 10. The composition and number of channels is determined by the broadcaster, for example, the state.

In Crimea, there are now 3 multiplexes, so that they do not interfere with each other, as in analogue broadcasting, in each region broadcasting is carried out at different frequencies (CHANNELS).

DVB-T2 broadcasting in Russia, Ukraine and a number of other countries is carried out only in the decimeter frequency range - these are from 21 to 69 UHF (UHF) channels.

List of transmitters and frequency channels broadcasting in Crimea

Alupka - 21, 30, 43 (st.Lenin 64)

Alushta - 30, 32, 56 (St. Sergeev-Tsenskogo 13)

Annovka (Belogorsk district) - 22, 32, 41

Belogorsk - 36, 37, 58 (st.Nizhnegorskaya 33a)

Dzhankoy - 24, 28, 30 (ul.Kraynaya 20)

Evpatoria - 23, 29, 32 (Razdolnenskoe highway 17)

Zavodskoe (Leninsky district) - 27, 26, 30

Kerch - 24, 41, 43 (Ordzhonikidze 144)

Kirovskoe (Black Sea region) - 21, 24, 40

Krasnoperekopsk - 24, 31, 43 (Tavricheskaya 105)

Partenit - 26, 27, 37

Sevastopol - 30, 40, 47 (Prospect Pobedy 96)

Simferopol - 36, 37, 51 (st.Studencheskaya 14)

Sudak - 32, 49, 60 (East Highway 33)

Feodosia - 26, 27, 30 (Simferopol highway 45a)

Foros - 21, 43, 44 (Cape Sarych)

Yalta - 26, 35, 37 (South Coast Highway 55)

To receive DVB-T2, you need (preferably) an external decimeter television antenna without an amplifier with modern cable with minimal attenuation of the signal in it. Use of all-wave antennas is possible. More often antenna with good cable receives the signal better than an antenna with an amplifier and an old cable. Usage Soviet cable RK-75 is not allowed, such a cable was not designed to receive signals in the UHF range, therefore, there are large signal attenuations in it.

It also happens that in the same settlement, for example, Nikolaevka, Zuya, depending on the place of reception, reception can be carried out from different directions. So on one side of the lowland in Zuya, the signal can only be received from Simferopol, and on the other side of the settlement only from Belogorsk.

If reception is carried out outside the line of sight of the direction to the transmitter, then maximum signal possible even in the opposite direction from the transmitter. In this case, the reflected signal is received. To determine the ideal orientation of the receiving antenna, select the mode on your TV or set-top box manual search channels, then enter one of the channels (preferably with a lower number from the list above) from the transmitter from which you want to receive the signal. Now you can see the received signal level scale and orient the antenna along it.
Rotate the antenna 5-10 ° in any direction, count in your head to 10, write down the signal strength. Rotate the antenna 5-10 ° more in the same direction
(further) and again count down to 10 and write down the received signal level. Thus, rotate the antenna 360 ° around its own axis.
After that, you will see from your records from which direction the maximum signal is coming.

With the advent of digital terrestrial television, many cable and satellite networks began to think more and more about connecting free broadcasting... Indeed, according to the FTP, on the development of the digital broadcasting network, in open access will appear over twenty television channels v excellent quality absolutely free . Which includes the compulsory federal television channels.

The question arises - how to connect digital terrestrial television at home?

This is not difficult. To receive digital terrestrial television you will need any subscriber equipment of the standard DVB-T2 / MPEG-4 with mode support Multiple PLP and decimeter antenna ( UHF) range. The antenna can be either collective (installed on the house, it is also called common in the house) or individual, installed directly in your house or apartment. Depending on the distance to the transmitting center, you must select the desired antenna... They are divided into active (with an amplifier) ​​and passive. When buying an antenna, you can first check the power of the transmitting equipment installed in your region and the distance to the transmitting center. Based on the data received, select an antenna.

Approximate coverage radius of transmitting stations:
10 watts- about 3 km;
50 watts- about 5 km;
100 watts- about 15 km;
500 watts- about 25 km;
1 kW- about 30-35 km;
2 kW- about 35-40 km;
5 kW- about 40 - 50 km.

Let's go directly to the equipment for receiving. There are three main groups: TVs with a built-in DVB-T2 tuner, set-top boxes of the same standard and digital computer DVB-T2 tuners. Their setup is similar, if not the same.

Video: how to set up digital terrestrial television DVB-T2

Connect digital terrestrial attachment best of all, according to the manufacturer's instructions, it is almost impossible to make a mistake there. Also, you can see official video from RTRS:

Several recommendations, also from RTRS:
connect the plug of the antenna cable and, if necessary, the digital set-top box to the TV;
connect autosearch of channels - the TV will tune to the corresponding digital terrestrial channel, when tuning to a channel in manual mode it is necessary to indicate the frequency of the channel (for example, 35 TV channel, 685 MHz);
most digital TVs (and set-top boxes) have a built-in signal level and quality indicator, which will optimally tune your antenna to receive digital broadcast signal(see the operating instructions for the TV).

On TVs with a built-in DVB-T2 tuner, all manipulations are carried out through the TV menu. Difficulties should not arise there either.

We recommend updating the software of your subscriber equipment to the most current one. This can be done in specialized services, or on your own (if you are confident in your abilities). The software can usually be downloaded from the manufacturer's official websites.

Frequencies of digital channels DVB-T2:

21st television channel- receiving frequency 474 MHz;
22nd television channel- receiving frequency 482 MHz;
23rd television channel- receiving frequency 490 MHz;
24th television channel- receiving frequency 498 MHz;
25th television channel- receiving frequency 506 MHz;
26th television channel- receiving frequency 514 MHz;
27th television channel- receiving frequency 522 MHz;
28th television channel- receiving frequency 530 MHz;
29th television channel- receiving frequency 538 MHz;
30th television channel- receiving frequency 546 MHz;
31st television channel- receiving frequency 554 MHz;
32nd television channel- receiving frequency 562 MHz;
33rd television channel- receiving frequency 570 MHz;
34th television channel- receiving frequency 578 MHz;
35th television channel- receiving frequency 586 MHz;
36th television channel- receiving frequency 594 MHz;
37th television channel- receiving frequency 602 MHz;
38th television channel- receiving frequency 610 MHz;
39th television channel- receiving frequency 618 MHz;
40th television channel- receiving frequency 626 MHz;
41st television channel- receiving frequency 634 MHz;
42nd television channel- receiving frequency 642 MHz;
43rd television channel- receiving frequency 650 MHz;
44th television channel- receiving frequency 658 MHz;
45th television channel- receiving frequency 666 MHz;
46th television channel- receiving frequency 674 MHz;
47th television channel- receiving frequency 682 MHz;
48th television channel- receiving frequency 690 MHz;
49th television channel- receiving frequency 698 MHz;
50th television channel- receiving frequency 706 MHz;
51st television channel- receiving frequency 714 MHz;
52nd television channel- receiving frequency 722 MHz;
53rd television channel- receiving frequency 730 MHz;
54th television channel- receiving frequency 738 MHz;
55th television channel- receiving frequency 746 MHz;
56th television channel- receiving frequency 754 MHz;
57th television channel- receiving frequency 762 MHz;
58th television channel- receiving frequency 770 MHz;
59th television channel- receiving frequency 778 MHz;
60th television channel- receiving frequency 786 MHz;
61st television channel- receiving frequency 794 MHz;
62nd television channel- receiving frequency 802 MHz;
63rd television channel- receiving frequency 810 MHz;
64th television channel- receiving frequency 818 MHz;
65th television channel- receiving frequency 826 MHz;
66th television channel- receiving frequency 834 MHz;
67th television channel- receiving frequency 842 MHz;
68th television channel- receiving frequency 850 MHz;
69th television channel- receiving frequency 858 MHz.

Let's clarify that the equipment of the standard DVB-T is not compatible with DVB-T2 standard equipment.
You can ask questions about the broadcasting of digital terrestrial television by calling the toll-free number of a single information center RTRS 8 800 220 2002 .

Digital terrestrial television channels (DVB-T2 standard)

First channel;
Russia 1;
Match TV;
NTV;
Channel 5;
Russia-Culture;
Russia 24;
Carousel;
OTP;
TVC.

Ren-TV;
Saved;
STS;
Home;
TV3;
FRIDAY;
Star;
Peace;
TNT;
Muz TV.

These channels are open and broadcasted absolutely free.

When a new stage of data transmission quality appeared, digital network TV DVB-T2. Digital television gives high quality pictures and excellent transmission signal. But to set up a connection to this network, you need to have necessary knowledge, choose the correct receiver and set it up well.

How to connect the T2 module and configure it will be described below.

How to connect a T2 set-top box to a TV

It is quite easy to connect the T2 tuner to the TV. If you have experience connecting turntables, antennas and other devices to a TV, then it will not be difficult to connect the receiver.

We connect the antenna to the receiver, and from it we connect the wires to the TV. This can be done using standard HDMI, Tulip or SCART leads. The most important thing is that you don't have to pay to call the master. However, if the master can connect the set-top box to the TV for free, then it is worth giving the case to him.

How to connect DVB-T2 to a TV without a set-top box

To connect your TV directly to the DVB-T2 network without buying a receiver, you can immediately purchase a TV with a built-in DVB-T2 tuner. This saves space, time and costs. Among other things, it will be possible to control T2 channels with one remote control from the TV, while the receiver will have two remotes.

Almost all LCD TVs today have a built-in tuner for easy connection. Simply insert the antenna into the desired slot.

How to set up DVB-T2 using a receiver

After installing and connecting the receiver, you need to set up the television. To do this, we perform simple steps:

• We go to the console menu.
• Click "Quick setup".
• If the default is another country, then we set "Russia".
• Then you must select the "DVB T2" standard. Often stands in the field of the DVB T / DVB T2 standard, which leads to the fact that the receiver is looking for channels DVB quality T, and only then DVB T2. What we need is DVB T2 and its excellent quality.
• Then we press "Autotuning" and everything will be done automatically.
• After finding the channels, you can also watch detailed information by the quality of communication by pressing the "Info" button.

Thus, you can set up the receiver to receive all desired channels... But tuning doesn't always go smoothly. At times, problems arise.

What to do if DVB T2 setup fails

There are several options for why the setup fails:

• The problem is in the receiver;
• Antenna problem;
• The problem is on the TV.

Try to tune with a different antenna first. If it helps, then the problem is in the antenna, and if not, then the receiver is to blame.

If the antenna is to blame, then only a specialist will help. If the receiver, then several options are possible. First, the receiver can have wrong firmware... Then you need to reflash the prefix. To do this, go to the manufacturer's website, download the new firmware, write it to a USB flash drive and insert it into the receiver. It will update itself and the problem will be fixed.

If the firmware update does not help, then the point here is most likely in the electronics. In this case, it is better to return the set-top box to the service or change it under warranty.

You can also check the TV itself. To do this, use a set-top box on another TV, and if it works, then the matter may be in the TV settings. In this case, contact the manufacturer. There they will be able to tell you how to correctly set the TV settings for connecting the receiver.

How to choose a set-top box for DVB-T2

The choice among receivers is quite large. Here are the most popular receivers we recommend to buy:

• Trimax TR-2012HD
• Strong SRT-8500
• Strong SRT-8502
• Thomson THT702
• Trimax TR-2012HD PVR (TR-2013HD PVR)

Their price starts from 1000 rubles and more, depending on the functions. More expensive receivers have more fine tuning, better signal reception, more different inputs to connect additional devices and they are also faster. Compared to satellite boxes, the DVB-T2 receiver is inexpensive.

You can also go to any hardware store and there, on the spot, choose new receiver in consultation with a specialist.

The introduction on the territory of Ukraine of terrestrial digital television of the DVB-T2 standard made it possible to significantly expand the zones of reliable reception of the TV tower signal, in comparison with analog signal... Also, the simplicity of setting up and installing T2 did the trick, they became much more popular. satellite TV with MFA channels.

Let's move on to the practical side and talk about the direct installation of all the equipment necessary for receiving DVB-T2. Many modern TVs are already equipped with an integrated DVB-T2 receiver, in this case it is enough to find out the position of the repeater, point the antenna at it and scan it using the TV available channels... In case of simple TV, installation and connection of T2 takes place in a slightly different way, we will now discuss it. To install T2 in standard version would need:

1. Digital receiver of DVB-T2 standard , the form factor you need, for example, for hidden installation with an external IR sensor, etc. The choice is huge now, there is practically no significant difference, everyone can choose for their needs. Practice shows that it is worth buying in a reliable store with a guarantee, we suggest you buy a receiver from our partners who will provide you service, warranty and repair.

   Buy digital set-top box MINI DVB-T2 with delivery from china

1. UHF antenna , in practice, the so-called "Polish antennas" are often used, you can also purchase an antenna manufactured by the enterprise "Konwalia", "Margoon", etc. hard to say. It is also desirable that there is an amplification board in it, which can be powered both from and from an external power supply.
2. Cable, regular television , almost any will do, but it is better to take it with a braid filling percentage of 50% or more.
3. RCA or HDMI cable to connect the receiver to the TV , may be included or need to be purchased separately.

Connecting digital T2 using the example of the World-Vision T38 receiver

First you need to install the antenna, if it was not installed before. Here it is probably stupid to advise something, I will just say follow the manufacturer's recommendations, and at least first turn it in the required direction. In which direction to direct the antenna, you can find out by looking at neighboring antennas or calculate the direction, for example, using Google or Yandex maps.

Connecting a digital receiver T2 to an antenna will also not cause great difficulties, the manufacturer and standardization makes this process simple and it is quite difficult to make a mistake here.

When connecting, it's hard to confuse something, RCA - the cable is connected simply, you just need to observe the color on the plug and on the socket, yellow to yellow, white to white, red to red. The antenna connector will also not allow you to connect other plugs to it, in this model of the receiver it is located on the left edge. It is also possible to connect via HDMI, everything is simple here, the COAX connector is used to connect a digital audio signal amplifier and standard configurations practically not used.

After all the cords are in place, we connect the last one - the power supply connector, for this model it is located on the side panel.

This completes the connection of the T2 receiver. Next, you need to turn on the TV and receiver. By pressing the "AV-TV" switch button on the TV remote control, we switch from the antenna jack to the "tulips", in newer TVs we select the input to which the receiver is connected. The following should appear on the screen:

The receiver will restart and a menu appears with channel search and setting initial parameters receiver:

Select the parameters and press "Autosearch", the receiver will scan and display the found channels.

If not all channels are found or none at all, adjust the antenna and repeat the search from the receiver's menu until the number of channels and the quality of reception satisfy you. Happy viewing!

The table shows the channels that can be received from the Ostankino TV tower in Moscow and the Moscow region. The list is divided into two groups - digital DVB-T2 and terrestrial analog. Operating frequencies, numbers, characteristics are indicated. Broadcasting all federal channels conducted free of charge. Encoded or paid services not yet provided. Package distribution digital programs goes through multiplexes, each with 10 channels, 20 are already going to normal operation and the third multiplex is being tested. First and Russia 1 go as high resolution HD. Broadcast breaks are regulated by the preventive maintenance schedule. Search and adjustment are possible in automatic or manual mode. Most apartment buildings have cable TV and in the general list you will find only the list provided by the operator. In this case, an external or internal independent antenna is required for reception.

The first multiplex of digital terrestrial TV
Channel logo	Name	Number	Frequency	genre	Video format	Audio format
	30	546 MHz	Federal	MPEG4	MPEG2
	30	546 MHz	Federal	MPEG4	MPEG2
	30	546 MHz	Sport	MPEG4	MPEG2
	30	546 MHz	Federal	MPEG4	MPEG2
	Petersburg - 5 channel	30	546 MHz	Federal	MPEG4	MPEG2
	30	546 MHz	Federal	MPEG4	MPEG2
	30	546 MHz	news	MPEG4	MPEG2
	30	546 MHz	Child	MPEG4	MPEG2
	30	546 MHz	Russian public television	MPEG4	MPEG2
	30	546 MHz	Federal	MPEG4	MPEG2
	30	546 MHz	Radio	-	MPEG2
	30	546 MHz	Radio	-	MPEG2
	30	546 MHz	Radio	-	MPEG2
Second multiplex of digital terrestrial TV
	24	498 MHz	Federal	MPEG4	MPEG2
	24	498 MHz	Religion	MPEG4	MPEG2
	24	498 MHz	Entertaining	MPEG4	MPEG2
	24	498 MHz	Entertaining	MPEG4	MPEG2
	TV3	24	498 MHz	Entertaining	MPEG4	MPEG2
	24	498 MHz	Entertaining	MPEG4	MPEG2
	24	498 MHz	Military patriotic channel	MPEG4	MPEG2
	24	498 MHz	CIS channel	MPEG4	MPEG2
	24	498 MHz	Movies	MPEG4	MPEG2
	Muz TV	24	498 MHz	Music	MPEG4	MPEG2
The third multiplex of digital terrestrial TV It has not yet been officially launched, so the list of channels is displayed on a separate page with the broadcasting schedule.

In the analog range, the number of conventional channels is less and it is planned to turn them off in accordance with official program governments to develop digital television.

The information was obtained from open sources and is relevant at the beginning of 2019. As the grid changes, the data will be updated.

Article 37. Erotic publications

×

Law of the Russian Federation of December 27, 1991 N 2124-1 (as amended on July 13, 2015)
"About the mass media"

The distribution of specialized radio and television programs of an erotic nature without signal coding is allowed only from 23:00 to 4:00 local time, unless otherwise established by the local administration.

For the purposes of this Law, a mass media specialized in messages and materials of an erotic nature means a periodical or a program that, in general and systematically, exploits an interest in sex.

Retail sale of media products specializing in messages and materials of an erotic nature is allowed only in sealed transparent packages and in specially designated premises, the location of which is determined by the local administration.