Lenovo vibe shot firmware 6. Lenovo Vibe Shot Z9 firmware for international version

24.09.2020 Reviews

It should be warned that if you decide to update Android and reflash L V S, then you are acting on your own. In short, I take my review about this device and I did not wait for a normal firmware from. Before the European firmware there was a version of Z907, after the firmware it became a version of Z9040. Communities Chinese Smartphones Gadgets and Accessories Blog L V S 9040. Watch Firmware L V Video! . Here you can download the firmware for the L V S phone running on A 5 for free. The firmware for the phone is quite simple, so the L V S Z90A40. L V S Z90A40 Unlock acc. L V 9040 factory firmware. Firmware for cell phones Firmware L Firmware L V S. Firmware L V S Z907 p. A little background on why the L Z907 is also the Z9040 of the Russian version. Firmware L V S Z9040 7 Android

Android below the one installed from the memory card for security reasons is not possible. L Z90A40 V S, A 6, 16 MPX, 32 GB M, 3 GB RAM. Firmware L V S Z907 with the transformation of the Chinese into. There is no pure android and is not expected, factory. Firmware L V S Z9040 7 Android L V S Z9040 B. Selling due to uselessness. When making a request to L, asking for clarification on how. Wireless charger for L V S 32GB -
Lenovo custom firmware -

Lenovo Vibe Shot firmware can be done in several ways. If the firmware file has not been uploaded here yet, then create a topic on the forum, in the section, experts will help you and add firmware. Do not forget to write a review of 4-10 lines about the smartphone in the subject line, this is important. The Lenovo official website, unfortunately, will not help to solve this problem, and we will solve it for free. This Lenovo model has a Qualcomm Snapdragon 615 MSM8939, 1700 MHz on board, respectively, there are such flashing methods:

Recovery - flashing directly on the device
A special utility from the manufacturer, or

We recommend the first method.

What are custom firmware (firmware)?

CM - CyanogenMod
lineageOS
paranoid android
OmniROM
Temasek's

AICP (Android Ice Cold Project)
RR (Resurrection Remix)
MK(MoKee)
flymeOS
Bliss
crDroid
Illusion ROMS
Pacman ROM

Problems and disadvantages of a smartphone from Lenovo and how to fix them?

If Vibe Shot does not turn on, for example, you see a white screen, hangs on the splash screen, or the notification light only blinks at all (possibly after charging).
If it freezes when updating / freezes when turned on (requires flashing, 100%)
Not charging (usually, hardware problems)
Can't see sim card
The camera does not work (for the most part, hardware problems)
Sensor not working (depending on the situation)

For all these problems, please contact (you just need to create a topic), specialists will help for free.

Hard Reset for Lenovo Vibe Shot

Instructions on how to make a Hard Reset on Lenovo Vibe Shot (factory reset). We recommend that you familiarize yourself with the visual guide, which is called on Android. .

Reset codes (open the dialer and enter them).

*2767*3855#
*#*#7780#*#*
*#*#7378423#*#*

Hard Reset via Recovery

Turn off the device-> go to Recovery
"wipe data/factory reset"
"yes - delete all user data" -> "Reboot System"

How to enter Recovery?

hold and hold Vol (-) [volume down], or Vol (+) [volume up] and the power button (Power)
a menu with the Android logo will appear. That's it, you are in Recovery!

Factory reset on Lenovo Vibe Shot can be done in a very simple way:

Settings->Backup & Reset
Reset settings (at the very bottom)

How to reset pattern

How to reset the unlock pattern if you forgot it and now you cannot unlock your Lenovo smartphone. On the Vibe Shot model, the key or PIN code can be removed in several ways. You can also remove the lock by resetting the settings, the lock code will be deleted and disabled.

Reset graph. blocking -
Password reset -

This article contains information about the mobile device. Here you can find and download the latest Android firmware for Lenovo Vibe Shot Z90-7 and you can also find out how to get root rights.

You can read more about root rights. Instructions for getting it are below.

In what cases it is necessary to update the firmware

I want to install a new firmware to expand the capabilities of a mobile device;
Recovering from an unsuccessful firmware is necessary
The device constantly reboots for no reason;
The smartphone does not turn on.

What firmware do we have

To download the firmware Android 8.0 Oreo, 7.1 Nougat, 6.0 Marshmallow, Android 5.1 Lollipop on Lenovo Vibe Shot Z90-7 read the article in full - this is important. By installing the latest available version of Android, you will be surprised by the new possibilities. And also you can download the official version of the MIUI firmware of different versions and custom original firmware.

If you have any questions, you can contact us via the comment form.

Firmware available: available.

Download firmware

Leaving a review through the comment system, indicate a real email if you have problems installing the firmware. Please note that the site administration may not answer questions immediately, depending on the workload. In addition to the administration, ordinary users can answer and help you, just like on the forum.

The manual on how to install the firmware is on the links below. Downloading firmware for Lenovo Vibe Shot Z90-7 is available via torrent with instructions.

Firmware installation instructions

To download, select the firmware you need and click on the link.

For installation:

Download the file with firmware and special program
Run the program on the computer
Select the required firmware version
Follow the instructions from the file archive

Video on firmware Lenovo Vibe Shot Z90-7

PROBLEM SOLVED. I got Z90-7 on Ali. It has a Chinese version of the robot 6.0.1 with a crooked Russian localization. Assembly: VIBEUI_V3.1_1621_5.273.1_ST_Z90-7. I tried to reflash to the European Z90a40_S363_160625_ROW (this topic) via QFIL. Failed.

The problem itself: Failed to pair smartphone and QPST package. Stuck on the point of adding a port, because the program simply did not see the port Lenovo HS USB Diagnostics. I tried several versions of QPST, reinstalled the drivers in the "without digital signature verification" mode, to no avail. In the QFIL port itself HS-USB Diagnostic visible. The second problem is that the smartphone (in the off state) when clamping vol + and inserting the usb cable did not go into firmware mode, but simply charged peacefully via usb.

OS: Windows 7 x64

Firmware components: Qualcomm USB Driver 1.0.14 (select exactly checked bld driver version), Lenovo USB Driver 1.1.24, QPST 2.7.437 with MS Visual C++ 2010 x86, MiFlash 2016.04.01.0, QPST 2.7 Driver COM LeDriver (the adb driver cannot be installed without it).

I made a backup and NVRAM, just in case.

I took out a flash drive and a SIM card (required), logged out of my Google account (required), reset the smart to factory settings through the settings.

Turned off the smartphone, clamped volume- and inserted the usb cable, released the key as soon as the smartphone went into recovery.

In this mode, in the manager, the smartphone was defined in several sections: ADB, Modem, HS-USB Diagnostics and HS-USB NMEA.

How I solved the problem: in QPST Configuration (in port and port labels the same - COMX, where X is the port number) manually registered the port, taking it from the device manager. Added, the port appeared as if nothing had happened. Closed QPST Configuration, opened QFIL, then the subheading and what I chose:

select port...> chose Lenovo HS-USB Diagnostics(not Lenovo HS-USB QDLoader 9008)

Select Build Type- Flat Build;

Select Programmer- selected file "prog_emmc_firehose_8936.mbn" from the unpacked firmware folder;

pressed Load XML and chose first rawprogram0, and then patch0.

pressed Download Content, the firmware was uploaded, QFIL independently sent the smartphone to the firmware mode, and the port changed from above to HS-USB QDLoader 9008. I read in the firmware manuals on w3bsit3-dns.com and here that they say you need to send the smartphone itself via adb to QDLoader 9008 mode, this is not mine case, the program did this step for me.

After ~5 minutes, the cherished ones appeared in the log: Download Succeed and Finish Download. I disconnected the smart from the cable and pressed the power button, after about 20 seconds it vibrated and after 3 minutes it was fully loaded.

In the process of preparation, I “squirmed” for a very long time with the addition of a port and “viewing” a lot of manuals in RuNet, trying to figure out how RIGHT Chinese to flash on the European firmware. It was much easier to flash your Xiaomi redmi note 2)))

Don't forget to change the region code, dial in the caller ####682# and choosing for example RU, then confirm, the smart will boot into recovery and change the region, after that it will boot in normal mode. After that, you can check the code, dial in the dialer ####5993# or####59930#, a window with the version will pop up, at the end it should be ROW_ru.

I hope you found something useful in my text. I wish you good luck with the firmware, and may luck be with you!

I took all the software and drivers from w3bsit3-dns.com (attached below).

Screenshots:

Spoiler

Task Manager:

QFIL:

I recently received mine Lenovo Vibe Shot Z90-7. The smartphone was the original Chinese firmware. In principle, I do reviews of both Chinese and Russian versions, in the case when there are no other firmware for the phone, or when there is at least English or Chinese in the firmware. But it so happened that Lenovo Vibe Shot Z90-7 has a large number of English items, and not only in the menu. Therefore, before reviewing the smartphone and its graphical shell, I decided to change the Chinese firmware to the international one. We will deal with Lenovo Vibe Shot Z90-7 firmware today.

We will flash our smartphone on the official international firmware. Given the problems of working in two networks and LTE on Android 6, we will flash on Android 5. In addition, if you need a six, then you can upgrade to it using OTA updates.

To flash the Lenovo Vibe Shot Z90-7, we need a software package, and . Download the archive from and unpack it. First of all, we launch vcredist_x86 in order to restore Microsoft Visual C++ 2010. The fact is that the MV settings, knocked down by the installation of games or programs, can interfere with the correct flashing of the smartphone. After restoring the MV, run the installation QPST 2.7.422.

The most important step is to remove the SIM card and memory card from the smartphone. 100% of phones from which memory cards were not removed turned into a "brick". Therefore, be sure to remove the memory card and SIM cards before flashing.

We launch the Device Manager to monitor the correct connection of the Lenovo Vibe Shot Z90-7 to the computer. Most likely, your smartphone will be determined as Vibe Shot with the bad driver installation icon.

We need the smartphone to be defined as a port Qualcomm HS-USB QDLoader 9008. Neither a removable drive, nor a smartphone, nor a Qualcomm HS-USB QDLoader 9006. But a Qualcomm HS-USB QDLoader 9008 port. To do this, completely turn off the smartphone. After turning off the smartphone, hold down the Volume + key (increase the volume) and insert the USB cable. You will have a device like QHSUSB_BULK.

Press the right mouse button to bring up the context menu, and select Update drivers. Automatic search will not return any results, so select - Search for drivers on this computer. In the window that appears, specify the unpacked folder with our drivers. To the warning about the danger of installing unknown drivers, we answer - Install this driver anyway. After that, our Lenovo Vibe Shot Z90-7 will be defined as Qualcomm HS-USB QDLoader 9008 COM 10. You may have a different port. The main thing is to determine how the Qualcomm HS-USB QDLoader 9008 port.

What to do if the smartphone is defined as Qualcomm HS-USB QDLoader 9006.

We launch QFIL. In the top line of the program, our device and the port on which it is located should be determined. If everything is correct, we continue.

In field Programmer path press Browse and select the path to the unzipped folder with the firmware, or rather, to the file prog_emmc_firehose_89XX.mbn. Then press Load XML... and select, in the same folder, first rawprogram0.xml, and then patch0.xml. In principle, you can’t go wrong, because when you select, the program will not see files other than rawprogram0.xml, and after loading it, it will not see files other than patch0.xml. Click Download.

Lenovo Vibe Shot Z90-7 firmware for international firmware has started. This can also be seen on the smartphone screen.

After the firmware, the first step is to change the region code. To do this, in the dialer, you need to dial ####682# . In the window that appears, select EN. Please note that after changing the region code, all data from your device will be deleted. And installing programs for your region may take a long time. My settings were applied for about 20-25 minutes. After changing the region, it is advisable to reset the settings in order to clean up all the tails.

This completes the Lenovo Vibe Shot Z90-7 firmware for international firmware.

Problems encountered when flashing Lenovo Vibe Shot Z90-7 and how to solve them:

Buy Lenovo Vibe Shot Z90-7.