The Lenovo A319 phone is one of the best options for lovers of budget gadgets. The manufacturer has a good reputation, and the smartphone itself is quite inexpensive. Nevertheless, no matter how reliable the device is, one day you may encounter technical problems.
Many are worried about the question: what to do if the A319 does not turn on? And what if Lenovo a319 does not turn on and hangs on the splash screen? Many users of this gadget faced this problem. Since it is very common, we suggest that you familiarize yourself with the main options for solving it.
Option number 1. Reboot
We are all used to the fact that if some technique does not work, then it needs to be rebooted. And it is not at all necessary to find out why exactly it does not start or starts to turn on, but does not load to the end. There are a huge number of reasons for failures, and even experts cannot always name the problem that you encountered in a particular case.
So if the Lenovo A319 won't boot up or freezes when turned on, the best and easiest way to resolve the issue is to reboot your phone.
Have you tried restarting your device but that didn't help? Then repeat five more times. Getting the system to boot normally is not so easy, but multiple reboots in the vast majority of cases become successful.
You can also try holding down the home button and the power and volume keys at the same time. Some Lenovo models, including A 319, respond to such an impact and stop hanging.
The main advantage of these methods of solving the problem is the absence of any risk to the phone and the data stored on it. This is their main difference from the methods of returning the phone to life, which we will consider next.
Option number 2. hard reset
If an elementary reboot did not help, and still Lenovo a319 does not turn on or does not boot beyond the splash screen, you need to resort to more drastic measures. The best option is to reset all settings, or, in other words, Hard Reset the phone. To do this is quite simple - you just need to go into Recovery mode.
To make it easier for you to perform this procedure, we offer a simple algorithm:
- Turn off the phone by pressing the power key for 10-15 seconds.
- Simultaneously hold down the power and volume down keys. You can do this with one hand, but we recommend using both. There were cases when, through negligence, people dropped the device, trying to press both buttons with the fingers of one hand.
- We are waiting for the manufacturer's logo to appear, and after a few seconds we get into Recovery mode.
- Using the volume up and down buttons, select the "Wipe Data" item. It involves deleting all data and settings from the phone. Thus, whatever the software problem, most likely you will fix it.
- The system will ask you if you really agree to the deletion of all data. Confirm the action and wait about a minute. Then you agree to reboot the device and wait for the updated software to be downloaded.
If all systems start normally, and the phone functions as it did before the problems occurred, then congratulations - you have found a relatively simple and painless way to solve the issue. If the phone still does not turn on, or the download does not go beyond the splash screen, it remains to resort to the third method.
Option number 3. flashing
The third method is the most radical, but you should definitely use it if the phone suddenly turns off, does not turn on or freezes. We act according to simple logic - if the system cannot be restored, then it should be replaced. In the case of computers and laptops, we usually reinstall the operating system, and for phones, firmware changes work.
First, download the firmware to your computer, and then transfer it to the memory card installed in the phone. The firmware is downloaded as an archive, and you do not need to extract files from it. We throw it on the card in this form.
Now we go to Recovery in exactly the same way as in the previous case, that is, by holding down the power and volume buttons. If there are installation files on the memory card, the system will recognize them by offering you the following item: install zip from sdcard. Just it is needed if the phone turns off and we need to change the firmware. Confirm the action by starting the file upload.
The flashing usually takes a few minutes. Do not be alarmed if the phone turns off during it - this is quite normal. It can reboot, and repeatedly. And this is not a cause for concern.
After several reboots, the system will turn on, and, most likely, you will no longer see freezes and brakes. This means that the problem is in the past, and now you know how to turn on the phone, which started to slow down or does not turn on.
Most owners of modern gadgets have repeatedly encountered situations when the device malfunctioned or did not respond to commands. Unfortunately, almost all smartphones fail from time to time, regardless of manufacturer and price.
Today we will consider the problem when the lenovo phone does not turn on, and analyze the reasons for this.
Lenovo cell phones often suffer from malfunctions in software and hardware components, especially if we are talking about budget models. One of the most common is spontaneous shutdown and the absence of a subsequent reaction to various user actions. Although the situation seems scary at first glance, only in extreme cases will you need a service repair or replacement of your smartphone. The sources of these breakdowns are of three types:
- Hardware - a problem in the "iron" after falls, temperature jumps, tests by the sun, moisture and sand.
- Software - refers directly to the operating system, viruses and failures.
- External - most often, a charger failure is mistaken for a malfunction in the smartphone itself.
Let's take a closer look at the reasons why the Lenovo phone does not turn on, and how to solve them.
Trouble-shooting
In this section, we will look at the most common malfunctions due to which Lenovo does not turn on:
- Complete discharge of the battery and other related problems with the battery.
- Firmware update failures.
- Software problems.
- Virus attack.
- Mechanical damage to internal parts.
Full battery discharge
Battery problems can be temporary or permanent, and they have different solutions:
Incorrect system update
From time to time, the Android OS firmware and its shell are updated, but failures may occur during the process. Often, after installing a new version of the system, the equipment turns into a non-working “brick”. However, do not rush to replace it with another model, this is solved by rolling back to the factory settings.
It is done using Recovery Mode. Three buttons are simultaneously pressed in the following sequence:
- Volume up rocker.
- Without releasing the previous one, the return key to the desktop.
- In parallel with them, the power on and off button.
A menu will appear on the screen. The pointer moves the volume rocker up and down, respectively. You must select the Factory Reset item, confirm the selection and wait for the process to complete.
If after that the smart does not work, then you need to contact a specialist, and he himself will be engaged in flashing the system.
Software failures
Even more often, Android-based cell phones do not start due to various kinds of software failures. The manufacturer and developers of the system have provided for such scenarios, therefore, it is advised to reset the settings in such cases. How to do it, we have already discussed above.
Please note that sequential key presses will not work on some models to start recovery mode. It is launched by a special button on the end of the case, which looks like a small hole, using a needle or a special pin that comes with the kit.
Viruses
Viruses are another popular cause of problems with Android technology. They get in by downloading files and applications from unknown sources, and can seriously damage the system data needed to run. Most likely, a flashing will be needed, which will completely delete the information. But in some cases, the service center specialists still take up the manual cleaning of the system storage from viruses and malware.
You can avoid this outcome by first downloading anti-virus software, such as Dr.Web or ESET.
Mechanical damage and moisture ingress
Consider the most popular types of mechanical damage that prevent switching on:
- Breakage of the screen (malfunctions of the cable, display or moisture ingress through the seams).
- The charging socket is dirty. Dust, fabric threads from clothes or crumbs get into it. you need to carefully, using a regular needle for this.
- Breakage of gadget contacts with batteries. This can be both oxidation and mechanical stress, which led to deformation.
- Damaged power button. If the device is new, then most likely it is a factory defect.
- The worst of the options is a burnt power controller that controls charging.
Ask a question to a virtual expert
If you still have questions, ask them to the virtual expert, the bot will help you find the problem and tell you what to do. Talk to him about life or just chat, it will be interesting and informative!
What to do if Lenovo phone does not turn on?
If you encounter such a problem that the phone does not turn on Lenovo You need to do some diagnostics on your own. And, perhaps, you can fix the problem with your own hands at home, without contacting a service workshop. Of course, this depends on the complexity of the damage and therefore we suggest that you familiarize yourself with the most obvious reasons.
Full battery discharge
Due to non-compliance with the recharging mode, that is, when you continue to use the gadget with a minimum percentage of charge, a so-called deep battery discharge may occur. And then, when you connect the phone to a charger or PC, it will not show signs of life.
These devices simply do not recognize it, since the nominal value of the battery voltage has fallen below the minimum indicated on its marking. Connect the charger and leave it like that for a couple of hours.
Charger, power connector
You need to make sure that the smartphone is receiving power from the network. Inspect the charger completely. The power supply, cord, cord plugs on both sides must not have obvious damage. Check it out on another gadget. Examine the connector itself on the smartphone. Possibly a phoneLenovo A319, A328, A2010, S60, A6010and other models does not turn on due to non-contact when recharging.
Battery
A failed battery will also cause the phone to Lenovo turned off and won't turn on. Some models have a removable back cover, and some need to be removed using a certain heating and peeling technology.
But to inspect the battery and check its rated voltage is necessary. You can contact the smartphone service Lenovo where experienced specialists will accurately determine the cause of the defect.
Firmware update
Often, due to incorrect operation of the operating system Android malfunctions occur and you are faced with the fact that the Lenovo phone does not turn on. Reasons that contribute to this:
- the system does not have anti-virus protection;
- using a large number of applications from unknown developers;
- program garbage is not cleaned;
- phone memory is full.
Problems related to errors in the software are solved in three ways:
Flashing should be the last resort, but it eliminates most of the defects caused by platform functionality failures.
Power button, cable
Triggered power button on/off , a broken or oxidized cable also leads to the fact that the smartphone does not turn on Lenovo . Perhaps the sinuses of the button location are dirty and it needs to be cleaned. Without disassembling the gadget, such a problem cannot be eliminated.
Screen
Connect your gadget to a PC, is it detected by the system? If the computer sees it, then in this case, a matrix (display) defect is likely. The device itself is working, but the screen does not give an image. What preceded the manifestation of the problem that the phone Lenovo won't turn on? Was it a fall, a strong blow or moisture? Contact the service center for specialists.
Mechanical damage and moisture ingress
Any careless action with the gadget will lead to negative consequences. Such mechanical damage as a fall or blow can cause damage that is corrected by expensive repairs. The same is the case with the ingress of liquids on the phone. It is necessary to take immediate action to prevent further oxidation of the elements inside the smartphone.
Lenovo A319 is a popular smartphone that has been out of production for a long time, but is still widely used among people. If you are one of the owners of this smartphone, then you definitely need to know how to hard reset Lenovo A319.
A hard reset is literally translated into Russian as a “hard reset”, but a more literary name is a reset.
Instructions for Lenovo A319 hard reset helps in almost all cases of smartphone malfunction. This may be a locked smartphone through a forgotten pattern. You can also use the Lenovo A319 reset if the smartphone freezes or does not turn on at all.
In short, Lenovo A319 hard reset can be used in any incomprehensible situation, but you must be prepared for the fact that all data on the smartphone will be deleted. You need to back up your data so you don't lose your photos, contacts, messages, apps, and more.
Also make sure your smartphone battery is at least 70% charged. The Lenovo A319 hard reset process itself takes only a couple of minutes, but the smartphone must not be allowed to turn off while cleaning the internal memory.
Lenovo A319 hard reset
1. Hard reset starts with shutdown smartphone. You can also pull out the battery to turn off the power completely. Don't forget to put the battery back in.
3. The image below is hard to see, but you need to select the first option " Recovery».
4. The new menu is called AndroidRecovery, or recovery mode.
5. Here you need to select “ wipedata/factoryreset”.
6. Now confirm that you agree to the deletion of all personal data - " yes-deletealluserdata».
7. 2-3 seconds, and Lenovo A319 hard reset is done!
8. You just have to choose “ Rebootsystemnow” to exit recovery mode.
We hope we helped you to hard reset Lenovo A319. If not, write in the comments below.
Phone lenovo a319, s60, s960, s860 and others sometimes hangs on the splash screen, when turned on on the logo and during application launch.
There are several reasons, but most often the fault is in the software (firmware), memory and applications installed on the phone.
If there is not enough computing power, then the “trap is provided” - lenovo hangs, or reboots
The manufacturer says that 700 MB of free space in the main (system) memory is required for stable operation.
It is also necessary to keep track of the number of installed applications, update them on a regular basis and, if possible, transfer them to the SD card.
NOTE: if you have suffered such a fate, then what to do and how to restart your lenovo phone if it freezes and does not react to anything
Why lenovo phone freezes and works slowly
Too many processes running at the same time can affect performance and lead to slowness and freezing.
What to do? Try the following tips below which may help you resolve the issue and troubleshoot errors.
NOTE: Viruses can also cause freezing. There are free diagnostic programs and antiviruses to check.
Lenovo stuck - turn it off and on
Turning off the phone for a few seconds will refresh and clear the RAM and restore the device to normal operation.
The work of some applications and processes may freeze if there is not enough memory: operational and telephone.
Check by going to Settings > Storage and delete or move to a memory card if the phone supports it.
Make sure all apps are up to date - many developers provide performance updates.
Open the Play Store. Click the icon, then click My Apps & Games. See a list of available updates for installed applications.
Click update all. To update apps individually, click on the app and then click Update.
If your Lenovo phone freezes frequently, then it may have installed an application that does not work properly and consumes too many device resources.
If problems appear after installation or while using a particular application, try uninstalling it to see if that solves the problem.
Phone freezes further - update android software
If the problem is not caused by the application, look for a software update, it may have appeared.
To do this, go to "Settings". Click "About device" > and go to software update. Select check now and install if available.
Developers are well aware of how their firmware works and if they receive a lot of notifications about freezes and crashes, they release fixes.
However, it also happens the other way around - the new version starts to freeze, then you should return to the old one. You can do this through a reset.
Restoring factory settings in case of a lenovo phone freezing
As a last resort, you can. Before doing this, pay attention to the following points:
Resetting will delete all phone data and media files. They will be lost and will not be restored if not previously synced or backed up.
Therefore, you should back up all important data and files. Also make sure the battery level is at least 35% or the phone is connected to a charger.
Make sure you don't forget your Google username and password. They will be needed to unlock the phone after a factory reset.
Phones running Android 5 or higher may have security enabled, which means that after the reset, you need to sign in with the same Google account you used before.
Phone freezes when turned on and won't turn on
This can happen if you install software from unverified sources. Return (reset) will return the phone to the "primal" state (as after purchase).
Also, the problem can be solved (not always, of course, depending on the specific one) by changing the firmware. You can do it yourself or at a service center.
Just keep in mind - erroneous actions or inappropriate firmware can completely ruin your lenovo.
CONCLUSION: of course, it is impossible to take into account all the points. I have described only the basic ones. If they did not help you, use a friend, in the form of a comment function. Good luck.
