The products of the Chinese company HUAWEI have gained popularity all over the world, and this is not surprising - they have enviable reliability, high performance and excellent quality. HUAWEI HG8245h is another development of this company, which allows you to organize access to the network. This optical router allows you to configure the Internet using PON technology. Let's consider in more detail what features the device has and how to flash it.
Provider Rostelecom issues routers for its customers
- the presence of a USB port;
- the device can be located at a distance of up to 20 km from the transceiver module;
- Wi-Fi;
- 2 POTS ports;
- 2.8 * 17.6 * 12.8cm;
- 0 ... 40 degrees Celsius;
- H.248, SIP protocols;
- 4 Ethernet ports;
- filter by URL, IP-address, MAC-address;
- port forwarding;
- 802.11 b / g / n;
- auto-adaptive port;
- VoIP, NAT;
- 60 thousand hours of adapter operation.
According to the manufacturer, the terminal is capable of operating for 23 years, and the maximum power it consumes is 15.5 watts.
It is HUAWEI HG8245h that is issued by the Rostelecom provider for its subscribers. The full name of the product is Echolife HGF8245h.
On the side of the device there are WPS, reset, Wi-Fi on / off keys. In addition, here you can see a BBU-connector, thought out for connecting a backup battery, as well as a USB-connector. You can assess the battery charge level directly from the terminal interface.
Connection
Before starting to experiment with the settings of the router, the device should be connected to the PC and the network. To do this, connect the provider's wire to the optical port of the router (located on the left). You can connect to a computer using Ethernet using a patch cord: one end of it is connected to the PC's network card, the other to the LAN port of the terminal. The TEL2 and TEL1 ports are used if the network is configured for SmartTV or IP telephony.
Internet setup
First you need to open a browser and enter "192.168.100.1" in the line. By this path, you can enter the interface of the HUAWEI HG8245h router. The system will prompt you to enter a password and login. Under the telecomadmin / admintelecom parameters, you can perform a complete configuration of the equipment, and root / admin will allow you to change the Wi-Fi parameters.
After logging in, go to the "Lan Port Work Mode" item in the "LAN" section. Our task is to select the ports that will be used to connect the network. It is best to check all the ports at once, but to use IPTV services, you will need to leave the last port for the set-top box.
Once done, go to "WAN" and enter the following parameters here:
- Enable WAN;
- Service List - Internet;
- Mode - Route;
- Binding options - SSID1;
- Enable VLAN;
- IP acquisition mode - PPPoE;
- Enable NAT;
- username / pass - enter the information provided in the contract (if the document is lost somewhere, call support);
- Dial Method - Auto.
Do not forget to also register the VLAN ID, without which you will not be able to create an Internet connection. The technical support specialist will tell you the correct identifier. The configuration should be saved through the "Configuration File" item of the "System Tools" section.
IPTV
To set up IP TV from Rostelecom for the HUAWEI HG8245h router, we recommend creating a new connection in the "WAN" section. As for the Internet settings, here you need to check the boxes opposite Enable VLAN and Enable WAN connection. Fill in the rest of the fields as follows:
- Mode - Bridge;
- Service List - IPTV;
- Bridge Type - IP_Bridged.
The "Blinding options" parameter is responsible for the port through which the IPTV set-top box will work, so you need to select a free port (LAN4). It is also important to set priority 4 opposite "802.1p". The main parameter is VLAN ID, it is issued by the provider.
In the next step, go to IGMP Configuration in the Network Application section. All that needs to be done here is to set the Snooping parameter in front of IGMP Work Mode, and enable IGMP (IGMP Enable).
Wi-Fi setup
First you need to open the WLAN tab. Here, the developers of the HUAWEI HG8245h router propose to name your network (SSID Name) and select the type of encryption for it. By setting the Autentification Mode parameter to "WPA / WPA2", a menu with security settings will open. All that remains is to enter the password in the WPA PreSharedKey field. Remember that the checkboxes must be selected in front of the WMM Enable, Broadcast SSID and Enable SSID fields.
Setting up wi-fi on huawei HG532e, as well as in router mode
Recently, the question of how to set up wifi on a huawei byfly modem has become very popular. This modem is issued with services, its full model is Huawei Gateway HG532e. Therefore, they often ask how to set up huawei hg532e in router mode, and then wi-fi on it . The modem is notable for being very convenient, unpretentious and relatively easy to configure.
ATTENTION! We highly recommend an article about the beginning of overheating of your laptop. Users often forget about this. It is from overheating that expensive laptop parts burn out. The problem of overheating is solved simply, you just have to not postpone it for later.
Introduction
It can take from 10 to 20 minutes to set up this modem, and sometimes more depends on the experience and ability to use such equipment.
Let's get started with the settings
In order to start setting up the huawei hg532e byfly modem settings, you need to go to some browser, for example, the Internet browser Opera or Mozilla Firefox or another.
Usually, before you start configuring the modem, you need to reset all previous changes made to it and return it to the initial settings. To reset the settings, you need to press and hold the reset button with something sharp for about 10 seconds, which is located almost at the power wire.
And so, in order to deal with the issue of huawei hg532e router, let's proceed to the settings. In the browser, in the field in which we usually enter the name of the sites, enter the path to the modem settings - 192.168.1.1 (do not hesitate when entering in the address bar, just imagine that you are entering the site address).
In the lines that appear Username and Password, you need to enter the word admin - both in the first and second lines.
After entering, a window will appear.
We go into the Basic line.
Click on Internet_B_0_33.
The following window appears.
We make such changes - change Connection Type: bridge to Connection Type: PPPoE.
An additional menu will appear.
In the additional menu that appears, you need to register Username and Password, those that are written in the agreement with ByFly. It contains a personal username and password. Make sure that the entered characters are correct, if at least one error creeps in here, there will be no Internet access.
Eventually…
To apply the settings, press the lowest button - Submit. After applying the settings, after about 20 seconds, the Internet should start working. To check, we register a site in the browser.
Everything, with these settings made to the modem, the huawei hg532e router was configured, that is, we connected the computer to the Internet using a network cable in router mode.
Also, do not forget to immediately install an antivirus with the advent of Internet access, an article about antivirus protection of your computer will help you with this. Also, you can always contact us and our wizard will perform this setting quickly and efficiently.
Configuring Wi-Fi on huawei hg532e
Now let's get down to the issue of setting up wifi huawei hg532e, that is, set up a wireless wifi connection on byfly.
In the Basic tab, move to the Wlan subsection.
We hardly change anything, only in the SSID: - enter the name of the future Wi-Fi network, mark the SSID with the SSID: Enable checkbox and compose a password for the almost already created Wi-Fi connection in the corresponding line: WPA pre-shared key.
We apply the changes made with the Submit button and everything is ready. ByFly wireless network on the Huawei Home Gateway HG532e modem is created.
Checking the created Wi-Fi network
Now you can try a wi-fi wireless network, you need to go to the Network and Sharing Center on your computer (there is Start - Control Panel - Network and Internet - Network and Sharing Center).
We find there the name of the created wireless network, try to connect, a field should appear asking you to enter the password that you entered in the WPA pre-shared key line. Here's how to set up wifi byfly huawei hg532e.
And so on any device that supports Wi-Fi, you must first find the name of your Wi-Fi connection, and then enter the password. Here's how to set up huawei hg532e byfly setup.
If all the settings are entered correctly, usually no problems should arise, but it is not a fact that additional nuances will not arise during the setup. If it was not possible to produce it, then you can contact us at, our masters will solve the issue of setting up wifi on byfly huawei, inexpensively and in the shortest possible time.
- I like it
- I did not like
- 25 Aug 2013
- Alex website
Often when users first get their hands on router Huawei HG8245, they believe that now is their era of ruling the world and that they only need to plug the plug into the outlet to take over the Internet space.
However, it is not. To take the first step towards this, you will have to study first, and then.
Design
It is worth noting that the selected router is a fairly good and very popular option thanks to the promotional offers of some service providers.
The Huawei HG8245 router allows you to get the maximum of the services provided by the provider, which makes it so attractive.
In particular, it can be used not only for, but also as a high quality IPTV receiver.
The HG8245 router belongs to the category of optical terminals, and its design is equipped with 4 ports for connecting wires (LAN). and a pair of IP telephony ports.
Some modifications also have, which allows you to connect a wider range of devices, including.
The design of the router is modern and attractive, while you can find models in both dark and light versions.
Its design is compact and elongated to 19.5 cm, and its thickness is 3.5 cm.
Due to the presence of special fixing holes in the lower part of the case, it can not only be installed on flat horizontal surfaces, but also fixed to the walls.
The HG8245 router, due to its design features, allows you to connect not only a standard set of office devices, but also IP-TV.
If desired, the functionality of the router can be increased by connecting a USB storage device ().
And for the sake of additional security, the manufacturer suggests using a branded one.
Rice. 1 - Router appearance
First start-up and initial setup
The router is connected via two wires. One of them must be optical and connect to the corresponding Optical port.
The other is connected to the LAN input, and it is to it that the connection is required during the initial start-up. Then the Huawei HG8245 router can be connected to the network.
To supply power, you need to use the corresponding button on the body. In order for the router to perform its functions, it needs to be configured after the initial launch.
After connecting the wire to a PC or laptop, you will need to launch a browser, for example, Internet Explorer or.
In the search bar to open the WEB-interface of settings, you will need to enter the local address " http://192.168.100.1", Which will allow you to download a form in which you will need to enter your registration data.
Depending on the firmware version, the “login / password” pair may differ. It could be a couple root and admin or telecomadmin and admintelecom.
Try to enter the second pair if the first did not work and the settings window did not load.
Rice. 2 - Welcome window of the WEB interface
Working with the WEB-interface
Once the settings page has loaded, you can change the operating parameters from factory to custom. Initially, it is required to activate the LAN ports.
This will require using the “WAN” section of the menu. To activate them, check the boxes.
On the tab, the ports will be formatted as a line with their corresponding names. To confirm the changes, you will need to click "Apply".
Then, using the "WAN" menu section in the "Modifications" subsection and "Route" in the "servicelist" list, select "INTERNET".
In order for all the entered data to be saved correctly, you need to make a mark in the "System tools" section using the "Save configuration" element.
Rice. 3 - Tab of the interface "System Tools"
Tuning the router
Fresh versions of popular operating systems allow you to do without fine-tuning your connection. The corresponding network parameters are set automatically.
But all the rules have exceptions, and if the automatic did not happen, then you will have to carry out a number of operations.
In the open window, you will need to select the "Create a new connection" item, and in the dialog - "High speed".
The username and password received from the service provider must be specified in the following requests of the setup wizard. There you will also need to enter the WLAN ID, which is also given by the provider.
Sometimes this is not enough to use the Internet, and therefore you have to add additional parameters and options to the WEB-interface.
After launching the Huawei HG8245 profile in the "WAN" section, you will need to fill in the "Username" (login) and "Password" (password) received from the provider.
Upon completion of the operation, you need to create a new connection by clicking "New".
On the "Mode" and "Route" tabs, options are selected in the lists: "service list" - "INTERNET", connection type - "PPPoE". The "username" and "password" are re-entered.
In the "Blinding options" subsection, you will also need to mark the ports and WLANID that were initialized at the initial configuration stage.
To save the parameters, you need to click "Apply".
At the final stage, you will need to reboot the device, be it a laptop or a PC, and use a cable through the "Optical" connector.
Rice. 4 - Tab "Status"
Setting up Wi-Fi in the router
If you belong to the category of users who often access the network via Wi-Fi gadgets, you cannot do without configuring Wi-Fi in the Huawei HG8245 router.
For this purpose, the same WEB interface is used. However, in this case, changes will need to be made in the WLAN section.
First, you need to set the marker to "Enable WLAN", i.e. permission to distribute. There is little information you need to enter on the tab. These include:
- SSID name (network name) - set arbitrarily (all users will see it);
- the largest number of parallel connected gadgets (preferably no more than 10);
- WPA PreShared Key (Wi-Fi password).
Tip: when choosing a password, make sure that it is easy to remember and enter. Moreover, it can include several numbers and letters with a total length of about 10 characters.
Additionally, to ensure security, you need to fill in the "WPA Group Rekey Interval" field, in which you should also indicate the invented security key.
To save the entered parameters, use the same “Apply” button. Only then will Wi-Fi function according to the configured parameters.
Rice. 5 - Section of the interface "WLAN"
Every huawei router represents a quality mark first and foremost. They are developed by the Huawei Consumer Business Group, a structural division of the company of the same name, created back in 2003. Partly thanks to him, the company became the best brand in 2014 according to Interbrand.
The Huawei router is one of the most famous router devices.
With the gradual spread of the new mobile Internet format, a 3G router has become a necessity. Now you do not need to choose the most suitable tariffs of mobile operators for a long time or wait for the next web page to load. The new format dictates new rules.
Huawei offers a galaxy of routers, from stationary home offerings to ultra-light solutions for travelers and students. The mobile router of this company is easy to recognize, among others: its distinctive features are the placement of indicators on the top of the device, their considerable size and predominantly white color. The emphasis on the external component is one of the reasons why the company's devices have been gaining positions in the rating lately.
How to set up a Huawei router
Standardization is what modern technology is striving for, and the devices presented by Huawei are no exception. All of them can be configured in accordance with a single algorithm. Small changes can be caused by firmware versions and available features, but the instructions below will allow you to put into operation any router of this company.
It is worth starting with the fact that setting up a huawei router does not need additional software.
Before starting the configuration, you must open the start page of the router.
Everything is simple enough. First, open your usual internet browser and enter the following address in the appropriate line: 192.168.1.1. Using this link, you can go to the start page for configuring the router, but first you have to enter the data - username and password. They may differ depending on the provider providing the mobile Internet, but by default the following parameters are included in the mobile router: admin for both fields. Click "Login".
The main interface will open in front of you, where you can find out all the data about the connected huavei. Now you have to choose the ports that will be used to connect other PCs to the router. This can be done in the LAN tab à "LAN operating mode". At the same time, due to the difference in the preinstalled software, the names of the tabs or their location may slightly change.
Then go to the WAN tab. To create a new Internet connection, press the "New" button. Now you have to choose the mode of operation - we recommend "Router". With it, the router will "distribute" the connection to all devices connected to it. In the menu "List of services" select "Internet", and "Connection type" - PPPoE.
In the same tab, you will be prompted to re-enter the "Username" and "Password", but they do not match the previously entered ones. You can find them by carefully reviewing the contract concluded with your provider. In the "Hardware binding settings" select the same LAN ports as in the tab of the same name. It remains to save the changes for them to take effect.
How to set up the IPTV function
But after all, the huawei wifi router is ready to give a lot more options for the user! Therefore, following the instructions, you can set up IPTV. This option does not work on all routers from this company, so check this before purchasing.
First, you need to repeat steps 1 and 3 from the previous algorithm. Only now, in the "Mode" tab, set the value "Bridge", and "List of services" - IPTV. For further configuration, you must check the box "Enable Vlan". In technical support, you can find out the VLAN ID that will be used for IPTV. It should be set in the appropriate field and duplicated in the "Multicast VLAN ID". In the 802.1p window, set the priority with the number "4".
A similar scheme, as in setting up a connection, is used in the "Device binding settings" tab, where it is also necessary to select the port used for IPTV. We save the changes. There are a few things left to finish and your huawei wifi router will be ready for IPTV. Open the "Network Applications" section in which select "IGMP Configuration". Confirm enabling IGMP in the field of the same name, and define the "IGMP mode of operation" option as Snooping. Click "Apply Changes".
Creating a working Wi-Fi network
Setting up a huawei router is not yet complete, because you need to create your own working Wi-Fi network and calibrate it according to your own needs. To do this, you can use the following instructions (in addition to the automatic setup program that comes with the device).
https: // site /
In the main web interface of the router, select the WLAN function and enable it. Next, you will have to put down certain values:
- "SSID Name" - enter any desired name for the future network.
- "Enable SSID" - without this, the huawei router will not "distribute" wireless Internet.
- "Number of bound devices" - in this way, you can in a certain way restrict unauthorized connection in the form of access of a certain, not more than a specified number of devices.
- "Authentication mode" - defines the type of communication encryption. It is worth choosing WPA2 Password as the highest quality security method.
- "Protection Mode" - TKIP & AES.
- "Code word" - enter the desired password of 8 or more characters. Traditionally, Cyrillic is not supported.
https: // site /
And in conclusion on the topic
Congratulations, your huawei router is fully functional! Now you can easily surf the World Wide Web, play the most demanding online games and watch high-quality Internet TV from anywhere in the world.
