Which monitor screen is better, matte or glossy? For me, this topic has long been resolved - definitely matte. It has a lot of advantages over gloss. We will consider all of them below. But, by personal example, I know many people who prefer glossy displays. In fact, the whole article today boils down to proving with specific examples why matte monitors are better than glossy ones. Immediately I will make a reservation that we will consider monitors with conditionally the same extension.
The main advantage of matte screens over glossy ones is that they do not glare and do not reflect a lot of glare. Have you ever tried working behind a glossy screen outdoors or in a brightly lit room? If not, then better not try! In it, nothing is visible at all. More precisely, it is visible, but only a reflection, and not what is needed.
Another advantage of a matte screen over gloss is that it is not soiled. Gloss, it is like a phone screen, just rubbed it to a shine with a cloth, and it is already covered in fingers. This does not happen on matte screens. Handprints are much more invisible on them. and a splash of ketchup.
But these are all obvious reasons why a matte monitor is better than a glossy one. And here are a few facts about which you probably did not know before.
To make the colors brighter and the colors more contrasting on glossy monitors, you have to increase the brightness. Think it's not scary? Then think, why did mom and dad tell you as a child not to look at welding? The same with the increased brightness of the monitor. The exposure time is required longer, but the effect is the same.
By the way, another negative factor follows from brightness. If a glossy screen is installed on a laptop, then at increased brightness, its battery will not last for a long time. And a laptop, it's a laptop, so that they can work for a long time without recharging.
Well, and the last argument, glossy screens are worse in quality than matte ones. Why? Let's figure it out further.
Let's move a little away from the philistine language of the article and talk a little in an advanced language (we will feel smart). A glossy or matte screen is nothing more than a matrix coating. Matrices, like everything else in the world, are good = expensive and bad (not always, but still) = cheap. Manufacturers of monitors or laptops in a low-price category are trying to save on everything, and even more so on matrices. Thus, cheap and low-quality matrices, say TN type, are inserted. Let me tell you a big secret: they have terrible color rendition. Black looks like dark blue through which the sun breaks, and white is some kind of withered canvas. Maybe not quite accurately described, but somehow so. The easiest and cheapest way to fix all this mess is to put a filter on the matrix, which is a glossy surface.
From the above, only one conclusion can be drawn: if you want to watch a high-quality picture without harm to your health, save up some money and buy matte screens. There is no money, but you want a computer - buy glossy displays. But, I hope that my article will incline many in the direction of buying all the same matte surfaces. For this I say goodbye, I will be glad if you click on the buttons of social networks.
How I increased my hosting tariff for free and got 1 year for free
Hello to all readers of the Old Crow blog. Today I will tell you a wonderful story that ...
Any user of modern technology will be delighted to buy a brand new monitor or laptop. But often already in the store, the question arises, which matte or glossy laptop screen is better? To answer it, you need to analyze the pros and cons of both options. Moreover, it is better if you independently figure out this issue, and do not follow the lead of the sellers, who are often interested in selling certain models of equipment. In order not to leave the store without buying at all, prepare in advance and decide for yourself which monitor is better to take. Actually, we will study and solve this issue in this article.
Features of the work of glossy screens
- The main features of glossy screens are considered brighter and more saturated shades, high color rendering and significantly pronounced blacks.
- But in cases where such displays are used, glare and reflections become more noticeable.
- When choosing which monitor is better - matte or glossy, keep in mind that even when the device is turned off, fingerprints are visible on the screen.
- If the sun's rays fall on it, then the image is significantly deteriorated. Because of this, it becomes completely impossible to work on it.
Important! The glossy surface greatly overloads the eyes.
Features of matte monitors:
- Matte "brothers" are distinguished by a special anti-reflective coating, thanks to which reflection is prevented.
- The matte displays are convenient to use at any time of the day and in any conditions.
- They don't overwhelm the eyes as much as glossy screens.
Important! The only caveat is that they do not reproduce colors well, and look dull and faded.
Under what conditions should matte and glossy monitors be used?
If you are thinking about which screen surface is better - matte or glossy for home use, then consider the following factors:
- If the lighting in the room is not very bright, then a glossy display with the most saturated color return is ideal.
- If you plan to work indoors with bright lighting or even outdoors, a matte screen is preferable. But remember that it will not protect you one hundred percent from glare. Be that as it may, you have to hide all light sources that are near the screen.
- Many offices and workplaces use workplace lighting sources such as floor and wall lamps. Therefore, in such situations, it would be appropriate to use matte displays. Due to all their properties, they make the highlights not so sharp, in other words, they blur them.
Important! It is simply impossible to imagine a modern person without a computer. Some purchase ready-made options, and some assemble it themselves. If you decide to assemble a personal computer with your own hands, the main thing is to take care of a high-quality power supply unit. In another of our articles, we have collected useful information about.
- Glossy surfaces when working with graphic pictures, objects are able to artificially increase the contrast, as a result - they turn out to be more saturated, bright. But excessive contrast only visually creates a sense of false beauty. Therefore, if you often come across such images in your work, then it is better to give preference to a matte monitor.
- If you just intend to read news on the Internet or watch movies, play video games, use a graphic editor for personal purposes, then gloss will be the ideal option for you. Reflections are not so noticeable on it, and in films entertainment, color saturation is very important.
- Note also that glossy screens consume a minimum of energy on laptops, since at lower power the picture looks brighter and more colorful.
Important! Naturally, it is impossible to foresee in advance in what conditions a brand new computer will be used in a month or even a few days, because situations are different. For example, you can buy a device with a glossy screen, and you will be sent to work on the street, then you will need to buy an anti-glare film, which will quickly solve this problem. But of course, you won't be able to completely transform the monitor into a glossy one.
Which monitor to choose for working with numbers or text?
If you buy a computer for working with numbers, texts, then when deciding which screen cover is better - matte or glossy, keep in mind that it should be as comfortable as possible for the eyes to perceive, and so that you can use it in a variety of conditions:
Important! If you are an active gamer looking for a laptop specifically for gaming, it is very important that it meets all specifications, such as processor power, memory size, screen expansion, etc. Such gadgets are not cheap at all, so, in order not to miscalculate, check out our other article about.
- Experts advise in such cases to buy matte monitors, because, unlike their glossy counterparts, they are not so saturated with colors and bright. But if the sun's rays hit them, they do not shine, and the text is well read.
- If in the first place you have the maximum need to convey the tint gamut of the image in a room with secondary lighting, then it is better to consider a glossy model.
Important! If you used to work on a computer with a matte monitor and suddenly switched to a glossy one, then at first it will be difficult for you, and you will feel discomfort at work.
Advantages and Disadvantages of Modern Monitors
To decide whether to choose a matte or glossy laptop screen, be sure to remember their pros and cons.
The pluses of glossy screens include the following:
- Distinct black color.
- Richer, more vibrant hues and superior color reproduction.
- They are ideal for graphics, video viewing and image processing.
Important! The central processing unit is the main component of a laptop, which is responsible for its operation. Nevertheless, there are times when the original chip fails for some reason and needs to be replaced with a new one. In order to facilitate your work, we have done a thorough job and made it relevant.
The disadvantages of glossy surfaces are:
- Negative effect on vision.
- The appearance of glare when sunlight hits the monitor.
- Manifestation of fingerprints.
Pros of matte screens:
- The presence of an anti-reflective coating.
- Comfortable conditions when working with numbers and texts.
- Minimal response in games.
Cons of screens with matte finish:
- Low color rendering.
- Dull and faded colors.
- The presence of grain in inexpensive models.
Important! Thermal paste ensures normal heat transfer between the processor surface and the laptop heatsink. Based on this, it should be borne in mind that it must be of exceptionally high quality. In order not to be trapped, follow the direct link and you will learn about
When you buy a laptop or a monitor, you are faced with a choice: matte or glossy? What's the best screen cover? What turns into a "mirror" in the light of the Sun, or one on which colors appear faded?
We hope this article helps you decide.
Glossy vs matte
Where did this opposition come from? After all, both glossy and matte monitors use the same LCD panels.
However, manufacturers produce glossy and matte monitors, and buyers are in the throes of choice.
Let's consider the advantages and disadvantages of each of the coatings.
Glossy displays are brighter. They have richer, more intense and contrasting colors; especially deep black color. This is a plus.
However, they shine on the Sun. This is a minus. If you often work outdoors or your work area is near a window, glare can get in the way.
The matte displays have an anti-reflective coating that dampens glare. Therefore, in rooms with bright artificial or natural lighting, it is more comfortable to work with such monitors.
The disadvantage of matte displays is that they are faded. The colors look a little duller on them.
The pros and cons of glossy and matte monitors are clearly demonstrated by the cover photo. On the left is a matte Dell and on the right a glossy Apple.
What should you choose?
It all depends on your goals.
If you are looking for a desktop monitor and the room is not very brightly lit, then a glossy finish with more vibrant colors is likely to suit you.
If you buy a laptop and plan to work outdoors often (on a terrace on a sunny fine day), then look for a matte display. Likewise, when buying a monitor for a stationary computer in very good lighting conditions (table by the window, powerful lamps). But remember: AR coating a matte display will not protect you 100% from glare, but it will be slightly less noticeable than on a glossy screen.
Of course, you cannot create ideal conditions for the entire life of the screen (especially when it comes to a laptop). Today your desk is far from the window, and tomorrow you have been transferred to an office bathed in sunlight. Therefore, choosing a glossy or matte display is always a compromise.
(Not only notebooks with matte (left) and glossy (right) finishes, but also different models from different generations. Please do not make direct comparisons.)
If it were possible to make a monitor where, at the click of your fingers, the matte finish would change to glossy (and vice versa), many would be happy. After all, this would make it possible to "tune" the monitor for specific conditions. But this is unreal.
Therefore, the contrast between "glossy vs matte" is likely to continue. After all, how many people, so many opinions.
A source
Which monitor - glossy or matte - did you choose and why?
The matrix is not only the name of a famous film, but also nothing more than a liquid crystal screen, which is an integral part of any laptop. The price of a matrix, depending on its type, can vary greatly: it all depends on the properties of this matrix, its color rendition and image quality. In general, this part of the computer may not be called the most expensive, but the quality and speed of your work will largely depend on it, or rather, on the type of it that will be installed on your "machine".
So, before purchasing a computer, you must decide whether you want the screen to be matt or glossy... Physically, in essence, matte and glossy surfaces are no different from each other, since they are based on the same liquid crystal panels. It's all about the final surface treatment.
"Gloss" was the brainchild of the Japanese company Toshiba, and at that time the technology had a long and difficult to pronounce name CASV (Clear Advanced Super View), which can be roughly translated as "clean, improved super-view / look", which partly reflects the essence of the phenomenon. Later, "gloss" was so named due to the fact that it has a smooth, so-called "polarizable layer". The advantage of gloss is that you get a sharper image. This is due to the fact that a special film is used, which has successfully begun to replace the glass previously used by the manufacturer. In addition, such matrices - in comparison with matte ones - are very popular due to the fact that the image is seen more expressive, juicy and expressive. You will hardly feel the "grain" that is more inherent in matte surfaces. Black colors are very intense.
Nevertheless, this type of coating has one very serious disadvantage that must be taken into account. The fact is that "gloss" has the property of reflecting light, which can infuriate anyone. Thus, if the room is very light, then it will be very difficult to see something on such a monitor.
In addition, one should take into account such a "trifle" as the slight dirtiness of the glossy surface. Even if you don't look closely, you can easily see dust, dirt and greasy fingerprints on such surfaces. Consequently, if you are tired of daily cleaning and dusting, then these qualities may be clearly not in favor of "gloss".
It is interesting to note that some manufacturers (in particular, the notorious Apple with its LED Cinema Display series) refuse to use any protective anti-reflective agents for treating such surfaces and use an almost untreated lens as the uppermost layer of the matrix. This is done mainly for aesthetic purposes only, since such a screen does not particularly benefit in color rendition compared to other types of surfaces.
On the other hand, there is also a "mat", which can act as an analogue of "gloss". In fact, it is not particularly different from its "colleague", but as far as the technology of its manufacture is concerned, everything is a little different here. The polarizing layer is specially “roughened”, as it were, using mechanical and sometimes chemical means. The “mat” will really be a great compensation in the event that you are annoyed by light reflections, as well as faces and other objects on the computer screen. It doesn't matter if your room is brightly lit: be it daylight or artificial light, which is a source of fluorescent lamps, you will still see information and images on the monitor.
Indeed, matte surfaces have a certain coating to diffuse reflected light, but that's the catch. Light is scattered, thereby increasing the degree of blur in the image. On top of that, this is reflected in the reduction of contrast, color intensity and reduces the angle of view. In other words, what is the strong point of "gloss" is a weakness for a matte surface.
If we give a more practical comparison as an example, it’s like looking at the world around you from a window: everything will seem somewhat muffled, somehow wrong and a little unnatural. This is the "world" through the prism of a matte surface. You must admit that we will never be able to see all the colors through glass! We will not even be sure that red is exactly red, and not some other color. But if we open the window and look at the world around us without obstacles, we will see the bright colors of real nature, rich tones of greenery and the bright beauty of the sky. And this will already be a real "gloss".
When it comes to cleaning matte surfaces, there are also some difficulties. Since the surface itself is rough and textured more complex than the “gloss”, the dirt, together with the dust, penetrates deeper into it, thereby making it difficult to clean. Thus, it is sometimes very difficult to appreciate the fruits of your labor. However, on rough matte surfaces, dirt, dust and grease are still less noticeable than on “glossy” surfaces.
Of course, sometimes the type of coverage is just a matter of habit and does not carry any utilitarian character. If you just like the way the picture looks on the "mat", then buy it. After all, any advice should always be carefully considered before applying to yourself and your situation, especially when it comes to expensive equipment, with which you will be working every day for a long time.
It seems that this war "mat against gloss" will never end. You can spend hours weighing all the pros and cons of this or that type of coverage, without coming to a decision that suits everyone. But if you approach this problem from the utilitarian side, you must first of all answer this question to yourself: what exactly do you use your computer for? What tasks do you solve on it? Each will have an individual answer to these questions.
