Disk Windows recovery 7 is required when serious problems occur in the operating system. If Windows boots, then the user can enter the Windows RE recovery environment directly from the operating system to troubleshoot the computer.
In the recovery environment, the user performs necessary actions to bring the computer to normal working condition, depending on the nature of the malfunctions and failures that have occurred in the operating system.
What to do in a situation where the system refuses to boot at all? In this case, the Windows 7 recovery disc will help solve the problem (of course, if it is solvable).
After turning on the computer, you need to enter the BIOS in order to set the boot priority from the optical drive (CD / DVD) or from bootable flash drive(USB flash drive). Another option: sign in boot menu (boot menu) to select the drive to boot from. After booting, the user needs to restore Windows 7 from the disk by performing certain actions.
To restore system parameters, in case of impossibility Windows startup 7, there are two options to boot the recovery environment:
- Using the Windows Recovery Disc (CD/ DVD disc or bootable flash drive)
- Using the Windows installation disc (DVD disc or bootable USB flash drive with the operating system)
In the first case, the user creates a system recovery disk in advance, from which, after booting this disk, the recovery environment starts.
In the second case, use installation DVD disk or bootable USB flash drive with the distribution kit of the operating system (you must have a disk or USB flash drive with Windows 7).
In both cases, the user can execute necessary actions for system recovery:
- Repair System Startup - automatic solution problems with the Windows bootloader
- Restore Windows using restore points - restore the state of Windows to the date the restore point was created
- Start System Image Restore - restore the system from a system image previously created using the backup function
- Perform some other technological operations to solve computer problems - memory diagnostics, command line launch
If the Windows bootloader is damaged, the system restores it by doing possible launch operating system.
A fairly simple way to solve system problems: perform a system restore using previously created Windows 7 restore points, provided that the function to create restore points has not been disabled on the computer.
Restoring a system image involves restoring an image of everything system disk with Windows OS, with installed programs, user data, from pre-made backup disk image created with the archiving and backup tool Windows copy 7.
If necessary, you can run memory diagnostics for errors, or open a command prompt window to run the necessary commands.
You can create a Windows installation disk yourself. operating room image Windows systems 7 you need to burn to a DVD disc using a disc burning program, or create a bootable USB flash drive.
When creating a recovery disc in Windows 7 with a regular system tool, one nuance comes to light: by default, a recovery disc can only be written to a CD / DVD disc.
What to do for those who do not have a disk drive on their computers (especially laptops)? You can bypass this limitation and create a Windows 7 recovery disk on a USB flash drive.
How to Create a Windows 7 System Recovery Disc
The process of creating a recovery disc on a CD or DVD takes place in several successive stages:
- Enter the start menu.
- Follow the path: "All Programs" => "Maintenance" =>
- In the "Create System Recovery Disc" window, select a CD/DVD drive.
- Paste in optical drive blank laser disc.
- Click on the "Create Disc" button.
- Next, the disk creation process will begin.
- When the disc burning is complete, the tool will inform you that the system recovery disc has been created.
- The window that opens provides information about the name of the recovery disk.
- Click on the "Close" button.
- In the "Create a recovery drive" window, click the "OK" button.
The Windows 7 recovery disc is ready for further use.
How to create a Windows 7 recovery disc on a flash drive
It is not possible to create a Windows 7 recovery disk on a USB flash drive with a regular tool, because support is not initially provided there USB disk. But, laptop owners who do not have a drive can bypass this limitation.
I draw your attention to the fact that there are articles on the Internet describing the creation of a disc Windows recovery 7 on a flash drive, in which the image is first created on a physical optical disk, and then transferred to a flash drive. But I have one question: "How can the user first burn the recovery disc to a CD or DVD disc if the computer does not have a disc drive?". It turns out that such articles are divorced from practice.
We need a program - an emulator to create virtual burners. it required condition. I was interested in the possibility of creating a Windows 7 recovery disk on a flash drive, so in the process of writing this article, I spent several hours testing similar programs until I found a workable application for this method.
The Phantom Drive program (you can find a program with localization on the net) was successfully corrected with the task.
To create a Windows 7 recovery disk on a USB flash drive, you must follow these steps:
- In the emulator writing drive a system recovery disk is created.
- Then a bootable flash drive is created for the recovery disk.
- From the emulator optical disc the contents of the recovery disk are copied to the bootable USB flash drive.
First step: first you need to write the recovery disc to the Phantom Drive virtual drive:
- Launch the Phantom Drive software.
- In the start window of the program, select the task: “Create. Create new blank disc».
- In the "Phantom Drive - Creation" window, in the "Create as" setting, select the type of disc (I chose DVD-RW), click on the "Create" button.
- After that, in the Explorer window, the inserted virtual optical disk will be displayed in the virtual drive.
- Follow the path: Start Menu => Maintenance => Create a System Recovery Disc.
- In the "Create a system recovery disk" window, select a virtual drive, click the "Create a disk" button.
- Next, the process of creating a recovery disk goes through, when it is completed, close the windows of the system tools.
The second stage: creating a bootable USB flash drive using the command line.
Diskpart list disk
- Insert the USB flash drive into the computer's USB port.
- Enter the menu "Start" => "Accessories" " Command line».
- Run the command prompt as an administrator, enter the following commands in sequence (after entering the command, you must press the "Enter" key to execute the command):
select disk 1
- The command line interpreter window will display all disks connected to the computer. Identify a flash drive among computer disks, focusing on size USB flash drive. From this image it is clear that the flash drive is called "Disk 1" (you may have a different disk number, depending on the number of disks connected).
- Select the drive in this case"Disk 1".
clean
- Next, you need to enter the following commands, as a result of which the flash drive will be cleared of data, create partitions, select a partition, mark the partition, format the partition in FAT32, assign a drive letter, and shut down the DiskPart utility.
- In the command line interpreter, run the following commands in sequence:
create partition primary
select partition 1
active
format fs=FAT32 QUICK
assign
exit
- After DiskPart is finished, close the command prompt. The bootable flash drive has been created.
Open the Explorer window, give the bootable flash drive some friendly name.
- open start window Phantom Drive program, select the Image. Paste existing image.
- Click right click mouse on the drive with the recovery disk, in context menu select Open.
- The Explorer window will display all the files on the disk.
- Copy the contents of the disk from the Explorer window to a bootable USB flash drive.
Everything, now, in case of occurrence emergency situation, you can boot from the Windows 7 system recovery disc using bootable USB flash drives.
If you don't want to mess with the command line, use program UltraISO. The procedure is as follows:
- After burning a disc with virtual drive, open the image in Phantom Drive.
- Insert flash drive into USB port computer.
- Launch the UltraISO program.
- Enter the "File" menu, select "Open CD / DVD ...".
- Select the image mounted in the virtual drive.
- Next, go to the "Boot" menu, select "Burn image of Hard disk...".
- Create a bootable USB flash drive with a system recovery disk according to this article.
Starting System Restore from a Windows 7 Recovery Disc
Boot your computer using the Windows 7 recovery disc. Next, follow these steps:
- Immediately after booting from the recovery disk, in the "System Recovery Options" window, select the keyboard input language, and then click on the "Next" button.
- Next, the recovery tool will search for installed systems Windows.
- In the Recovery Options window, select the operating system (if there is more than one). By default are used regular funds recovery.
- If you need to start a restore using backup image system, activate the item "Restore your computer using a previously created system image."
- Click on the "Next" button.
- Then select one of the suggested recovery environment tools:
- Launch Recovery
- System Restore
- Restoring a system image
- Windows Memory Diagnostics
- Command line
- Depending on the tool you choose, perform the necessary recovery steps healthy state operating system.
Restoring Windows 7 from an installation disc
Restoring Windows 7 from an installation disc is the most best option to restore the system. The advantage is that from the installation disk or flash drive, in addition to recovery, you can install the operating system on your computer.
To run the Windows 7 recovery tool, you must boot your computer from a bootable USB flash drive or DVD with the operating system.
After downloading, the installation of Windows 7 starts.
In the window " Windows installation» Agree us with the choice of the Russian language, click on the "Next" button.
In the next window, in the lower left corner, click on "System Restore".
Conclusion
The user can burn a Windows 7 recovery disc to a CD / DVD disc or USB flash drive, for use in case of problems with the system. In another way, the recovery environment starts directly from a bootable USB flash drive or a Windows 7 installation disk, after booting from removable media.
Creating a Windows 7 recovery disk on a USB flash drive (video)
https://vellisa.ru/windows-7-recovery-disk
It makes sense to use the Windows 7 recovery disc when the OS has experienced a serious failure, as a result of which neither the OS itself nor the troubleshooting menu is loaded when pressing F8 during startup. Therefore, you need to make a recovery disk in advance, using standard Windows tools 7 or suggestions third party developers. The latter may have even more extensive functionality, therefore, on the record rescue disk should also pay attention.
How to create a Windows 7 rescue disk
In the OS in question, there is already a way to create a rescue disk that has sufficient functionality to solve most problems associated with booting or abnormal operation of the system. Consider the process in stages:
After a few minutes, the recording will complete and you will have a media with which you can solve most problems with Windows 7.
How to use the rescue disk
To boot using the installer or use boot disk you must first configure the BIOS accordingly. AT general case the procedure is as follows:
Please note that modern computers and laptops are equipped with more secure UEFI BIOS. To enter from the rescue disk, for this system you will have to disable secure boot. The ways to do this in stationary PCs and laptops are different, so it is better to contact the manufacturers of a particular device for help.
Restoring Windows 7 from disk
After the restart, the recovery application will open, where the first step is for the user to select the language for working with the program and click "Next". When you enter using the installation disk, to switch to this mode in the installation window, click on the "System Restore" link. After that, you can start direct work with program:
Using the installation disc, you can usually get rid of many problems, for example, restore Windows bootloader 7. If it is not restored automatically, you can use the command line:
Using breakpoints
The second item will cause the program to try to return Windows 7 to a previous stable state. Windows 7 allows you to create saves the most important parameters using restore points. Their OS tries to create before any important changes- installation big applications, drivers, etc. To roll back the OS, do the following:
You need to be prepared for the fact that previously installed applications will disappear after a rollback to an earlier configuration and they will have to be installed again. See what installed programs can be lost after a rollback is possible by clicking on the search for affected programs button.
Restoring a system from an image
Not always using the installation disk can make the system work again. Standard Tools recovery disk in this case suggest to apply Windows image 7, the creation of which is the task of the user himself:
You can also select the image yourself, for which select the very last item in the selection window.
If you are not satisfied with the set of recovery tools provided by the standard boot Windows disk 7, you can run other utilities.
For example, good set Recovery tools for this OS are offered by MSDaRT 6.5.
Disk
system recovery
Theme for computers or laptops,
with Windows OS installed.
And after the "Autorun" window appears and formatting
disk - click in the initial tab, the "Create disk" button.
A scale will appear in the same tab.
Which will, as the recovery disk is created,
fill in green. Until the disk is created
fully.
You just have to click on this tab "OK".
And the tab will close.
In the "Autorun" window, the final result will also be shown.
You can open the folder with the created recovery disk,
Pressing active button in "Autostart"
We made sure that the folder is not empty and the recovery disk was successfully created. You can close and eject the disc safely.
By creating a system recovery disk, you can be sure
that if there are serious problems with Windows, the disk will help you.
Or the system will notify you
use the recovery disk.
Or you can initiate a system restore yourself.
If you have serious problems with your computer.
If, after turning on the computer, Windows generally
not loading - you can paste system recovery disk
into the drive, and since the disc contains system recovery tools, the computer will resume.
Of course, before using the recovery disk, you need to make sure that the problems really exist. That is, if Windows did not boot from one time, then turn off and turn on the computer again.
And further. You should keep in mind that after you restore your computer using the recovery disk, you may lose some files that are important to you. Be it photos, videos, music, text documents. Therefore, in order to avoid loss, you need to transfer such files to external media.
On a flash drive or disk.
You probably may have lost your installation disk Windows 7 or your supplier didn't give it to you when they pre-installed OS Windows 7 to your computer. To protect yourself so that you can continue to do work or get information when your Windows OS turned on, but it does not start correctly, it always a good idea to prepare Windows 7 system recovery disk for use in emergency situations.
repair disc Windows 7 operating system allows users to boot the computer and download Windows Recovery Environment (WinRE). The Windows Recovery Environment offers users Windows 7 a set of recovery tools to help users diagnose problems, repair serious technical errors and restore your computer from a system image. Users can create such a repair disk for their computer/laptop for any emergency use.
For creating Windows 7 system recovery disc, users need to go to Control Panel -> System and Security -> Backup and recovery. Then in the left panel you need to find the item " Create a system repair disc - Create a system repair disc". Alternatively, users can simply type recdisc.exe into the search box on the start menu.
As soon as you click on the " Create System Recovery Disc", You will be prompted with a small window that requires users to insert a blank disc into the drive in order to start creating a system repair disc. Once users have inserted a blank disc, they can click on the " Create disc - Create disc” to start creating a system recovery disc.
Process of creation system recovery disk takes only a few minutes. Once this is done, users can keep a system recovery disc for any emergency use in case operating system cannot be loaded correctly. If users want to access options System Restore in Windows 7, users just need to insert the disc and choose to boot the computer using CD/DVD disc. When users boot their computer from this repair disk, users will be prompted with a list of system recovery options - Startup Repair, System Restore, Recovery System image, Windows Memory Diagnostic and Command line. Users can select the appropriate options from there and click the Next button to continue.
General creation Windows 7 repair disks is not a complex or difficult task. Create a system recovery disk, users are advised for emergency purposes. Even if this repair disk does not allow users to reinstall the entire Windows OS but it can be very useful tool to reboot Windows, and allows users to receive important data without much delay.
Many of us at least once, but faced with a situation when you turn on the computer, and it gives a black screen or an error - although everything was fine yesterday. There are a lot of reasons for such a malfunction.
This can happen when incorrect installation driver, from the actions of a virus, if damaged system registry, damage to the Windows "kernel" files and bootloader files, or simply from our erroneous actions while working with a computer.
If you have an installation disc with Windows distribution 7, you can use it to get to the system recovery utilities and try to restore it. What if there is no such disk? Then we ask a very good friend or call the master and pay for his services, which are not so cheap.
To isolate yourself from similar situation and try to revive the operating system yourself I RECOMMEND you create a windows system recovery disk or, as it is also called - boot disk. It is created very simply, but there is one condition - at the time of creating the boot disk, your operating system should work normally.
1. Create a Windows 7 system recovery disk.
Go to menu " Start» -> « All programs» -> « Service"and run the program" Create System Recovery Disc».
Insert an empty CD or DVD disc into the drive and click " Create disc". After a few minutes, the boot disk will be created. Press " OK».
Now sign and store the disc in a safe place.
2. System recovery using a boot disk.
Let's say that you turned on the computer, but the operating system does not want to boot. Then we take the boot disk, insert it into the drive and reboot. If your computer is not configured to boot from CD or DVD, then you will first have to go into the BIOS and set the boot priority from DVD drive. How to do this is written in the article.
So. When a black window appears with the inscription " Press any key to boot from CD or DVD…"Press any key, after which the download will begin installation files from the boot disk.
After downloading the files, select the language, and the recovery program will immediately start scanning HDD for operating systems.
At the end of the scan, you will see all the operating systems installed on the computer. In my case, it is "Windows 7-Basic". Select the operating system and click the " Further».
The program window will open in front of you. System Recovery Options».
Launch recovery.
First of all, run the utility " Launch Recovery”, which will try to find and eliminate errors that prevent Windows boot. During the operation of the utility, we may be warned that problems were found in the boot options, and in order to fix them, you need to restart the computer.
The screenshot below shows that my operating system is running in normal mode and contains no errors.
If problems are found in the Windows boot options, a window will open asking you to fix them. Press the button " Fix and restart».
System Restore.
When an attempt to restore the launch does not help, then select the next menu item - " System Restore". After starting, the utility will find all existing restore points or the so-called rollback points, which Windows automatically creates when installing programs and applications and, thereby, will provide us with the opportunity to roll back the system to a stable state.
We select the last stable restore point, in which Windows 7 worked fine, and click " Further", and in the next window we confirm our actions and click" Ready».
After pressing the button " Ready» A window will open in front of you with a warning that it will be impossible to interrupt the restore operation. Press " Yes».
At the end of the recovery utility, the computer will reboot, after which your Windows 7 will boot with working parameters.
Now you can easily create system recovery disk and with his help restore windows 7.
Good luck!
