How to restore windows on asus laptop? Step-by-step instruction. Hot keys (buttons): BIOS boot menu, Boot Menu, Boot Agent, BIOS Setup

Due to the presence of viruses, inconsistencies in drivers or software, the OS may fail. If your Windows crashes, don't panic. The situation can be corrected by returning the state of files and programs to the moment when the PC was working properly.

While running OS Windows 7, 10 or 8, certain errors and problems may occur. As a result of such failures, a new launch of the operating system in operating mode becomes impossible. In this case, it is not at all necessary to do a laborious reinstallation of the OS. It is enough to perform a system restore.

OS recovery using the recovery environment

At work, we use the following scheme of actions:

1. Reboot the computer, press the F8 key during boot;
2. Troubleshooting;
3. System restore, OS restore point selection;
4. click "Further" and again "Further";
5. We press the button "Ready", reboot the system (in the Menu, select boot with the last known good configuration).

Windows 7 System Restore

There are several ways that you can resort to resuming the operation of the OS. Some of them are based on reverting to saved settings. Others simply clear the data.

You can perform "resuscitation" of the OS in one of the following ways:

• by selecting restore points;
• using the command line;
• through safe mode;
• using the recovery environment;
• using an image/boot disk.

Restoring the operating system using system "resuscitation" checkpoints is one of the most affordable, effective and popular options. To apply it, you need to make a series of clicks:

1. Panel "Start";
2. "System Restore";
3. "Further";
4. "Select a restore point";
5. "Ready".

This operation will fix the problems with the computer, undo the changes and return the system to a working state that allowed the PC to boot normally. Loss of data, files and documents does not occur during such recovery. All data is saved. The operation is reversible. You can roll back the system to a previous state of the computer and use a different restore point.

Many people ask themselves how to make a recovery point on their own (manually) in order to choose it in the future? To do this, in the same menu "Start" - "System Restore" You can create such a point yourself at any convenient and suitable time for you. It will be saved with the current date, which can only be remembered.

From a restore point

In computer engineering, there is such a thing as a restore point. These are saved PC settings. As a rule, saving occurs automatically with each successful OS boot. The easiest way to resume Windows 7 is to use exactly this data.

Press F8 when the computer boots up. This command will bring up a menu of system startup options. Next, select the Last Known Good Configuration option.

You can also use another method. Enter the properties of the My Computer folder. Find the System protection line, clicking on which you will open the dialog box of the same name. Click Recovery - Next. We set a key date, indicate the disks that are subject to correction, and confirm the actions. After rebooting, the PC should work normally.

No restore points

You can fix OS problems without having restore points. To do this, you will need to resort to the LiveCD program. It needs to be downloaded and written to a USB flash drive with the .iso extension.
Further, all actions will take place in the BIOS. You need to configure boot from a flash drive. To do this, in the Boot section, select USB-HDD in the First boot device line.

Before proceeding directly to recovery, copy all the necessary files to a removable drive. The LiveCD program provides a special menu for these purposes.

We will fix the system error using the backup copy. Connect the flash drive, open the folder Windows\System32\config\ . Files with the names default, sam, security, software, system must be moved to any other folder. In their place, we transfer similar files from the RegBack folder and restart the computer.

The described method will only help if the problem is related to the registry.

Command line

You can resort to "reanimating" Windows 7 from the command line if the PC begins to freeze or work slowly, however, the system boots up. Enter the menu "Start" and using the right mouse button, launch the command prompt as an administrator. Issue the rstrui.exe command, which will open the System Restore program. Click "Further". In the next window, select the desired rollback point and click again "Further". Upon completion of the process, the PC should work normally.

You can enter the utility in another way. We go to "Start". To call the command line, press "Run" and write the CMD command. We click on the found file CMD.exe and wait for the launch. Next, enter rstrui.exe on the command line and confirm the action with the Enter key on the keyboard.

It is not always possible to play it safe and create OS restore points in advance. There may be problems that block the option of such a "resuscitation" of the PC. Then you can use another, no less effective and easy option - restoring the Windows system using the system itself.

Based on the diagram:

1. Icon "My computer"- right mouse button "Properties";
2. "System Protection";
3. In a new window, click "System Protection", restore button;
4. "Further";
5. Choose a restore point according to the date;
6. Specify the system disks to be restored;
7. Confirm the operations and reboot the system.

Restoring Windows 7 using Safe Mode

This method is preferred if the usual system boot is not possible. Then, after pressing the PC power button on the system unit, hold down the F8 key to call "Launch Menu". One of the menu options is "Safe mode". Select it and press Enter on the keyboard. As soon as Windows loads, we perform the algorithm of actions that we described earlier.

System Restore Windows 8/8.1

If you were able to start the OS, you can resume Windows 8 via "Options". Hover over the upper right corner and enter them. Click on "Changing computer settings" – . Chapter "Recovery" will offer several options:

1. "Typical Restore with Information Preservation".
2. "Delete data and reinstall OS".
3. "Special Option".

Decide exactly what needs to be done. Then follow the menu prompts.

If you choose the latter method, in the window that opens, click on the diagnostic item. You will be offered the following options:

• "Reestablish";
• "Return to original state";
• "Extra options". This item includes the ability to roll back to the desired resume point.

To resume Windows 8.1 press Win+R and call sysdm.cpl . In the system properties window, on the tab "Protection" specify the required system drive. Click "Reestablish". Clicking "Further", you will be able to see a list of rollback points. Select the one you want and click "Search for affected programs". Changes that have been made to the PC since the selected moment will be deleted. End the process by clicking "Ready".

In the case of working with Windows 8, there may be problems, incorrect Internet operation, etc. To fix this, you can use the classic recovery method through restore points.

Another option is to roll back the system. To do this, open the menu "Start" - "Control Panel" - "Windows Update". Choose an item "Uninstall updates". You can do the same using the command line.

So, in the list of updates that opens, we remove those of them, from the moment of installation of which (we look at the date) problems and malfunctions began. Delete unnecessary files and reboot.

In Windows 8.1, you can perform a factory reset. Important files will not be affected during this operation. The method is effective, but for its implementation, the OS needs to boot without any problems. We use the algorithm:

1. Right side of the monitor - "Options";
2. "Change settings";
3. "Renewal and Recovery" - "Recovery";
4. "Recovery without deleting files".

If you cannot log into the system in the usual way, you must use the disk with the system. Load the installation disk, select "System Restore". We press the button "Diagnostics", and "Reestablish".

Windows 10 System Restore

If you're having problems with Windows 10, press Windows + Pause. Go to "System Protection" and press "Reestablish" – "Further". Select the desired indicator and click again "Further". When finished, press "Ready". The computer will automatically restart and the changes will take effect.

One of the advantages of the "dozens" is the ability to return the settings to the factory settings. This helps avoid having to install the system first. To reset your data go to "Computer Settings" – "Update and Security" – "Recovery" – "Reset your computer". Click "To begin".

You can take care of the possibility of rollback in case of failure in advance. Resume points can be created independently or configured to be automatically created at the desired frequency. To do this, in the settings, in the Update and security item, select the Backup service. Specify where to save copies, click Add disk. After selecting a device, the function will be activated.

You can restore the Windows 10 system again through the use of restore points. In this case, the system will be rolled back to the moment when it was freely loaded and worked without failures. This recovery method is described at the beginning of the article.

If the OS is not loaded, then a warning table appears on the screen with the key "Additional recovery options". Click it and choose "Diagnostics" - "System Restore". We make a choice of a Windows restore checkpoint, we are waiting for a system rollback and reboot.

If such operations did not help and the computer continues to work incorrectly, you can roll back to the basic settings. Some programs and utilities, personal PC settings will be reset, and personal data will be deleted.

This technique is used extremely rarely if the other options described above do not help. The algorithm of actions in this case is as follows:

1. "Start" - "Setting Options"- tab "Updates and Security";
2. Paragraph "Recovery"- button "To begin";
3. Choose to delete all files or save some of them.

The system rollback after that will take 40-90 minutes.

Resume using the installation disc

One of the radical methods of fixing the error involves using the installation disk. After running it in BIOS, click System Restore. In the Troubleshooting section, select the desired action. Then follow the system prompts to complete the process.

Similar posts

The debate about which is better than Windows 10 or Windows 7 does not subside. This phenomenon is not accidental. Microsoft developers claim that nothing is better than Windows 10, and experienced users say the opposite, they say, the system is more reliable than Windows 7 now ...

Computer freezing is a rather annoying problem. This can occur both at the stage of system startup, and in the middle of the process of its operation. Let's see why this can happen and what to do about it? Why does my computer freeze...

Sometimes, when installing programs or applications, a message appears on the computer screen stating that error 5 Windows 10 has occurred. This means that the user is denied access. This happens if there are several accounts in the system ...

Often, users of computers running Windows 7 encounter operating system health problems. Computer problems usually appear when it slows down and programs do not open. Also, the computer may not start at all or do it every other time.

The reasons that cause problems in the performance of the operating system can be very different. For example, if a computer gets virus, it can damage system files. Also, difficulties with the PC may appear during installation. low-quality software, which can damage the structure of system files. To solve the problem with the health of a computer on Windows 7, you need to roll back to the previous restore point.

To protect the OS in Windows 7, restore points are used that the system periodically creates. Essentially, restore points are previous state of Windows 7 system files. To help the Windows 7 PC user, we have prepared a material that will describe the detailed system recovery process in various ways.

Recovery in the loaded seven

If your computer running Windows 7 boots, but the system is not stable, then it's time to roll back to a previous restore point. First of all, we need to get into the window in which you can call up the system recovery options. To do this, open the program "" by pressing the key combinations Win + R, through which we enter the following command: systempropertiesprotection

A window should open before us. Properties of the system» tab « System protection". You can also get to this window in the standard way through the menu " Start". The next step is to press the button Recovery….

After clicking, the System Restore window will open. It will prompt you to restore the system using the recommended access point or choose another one. We will stop at recommended restore point.

This window requires confirmation for the selected restore. To confirm, press the button Done.

This button will bring up a message warning that after the restore procedure it will be impossible to return to the previous parameters of the seven. By clicking on the Yes message, we will start the Windows 7 system restore.

If the process of returning to the previous state occurred without errors, then a corresponding message will be displayed.

If you are unable to roll back to the previous settings using the recommended point, then you should select the point that was created later than the selected restore point Windows 7 systems. I would also like to note that to perform this operation, you will need special privileges. That is, when you log in, you must select an account admin and enter a password for it.

We return the computer to working capacity at OS startup

In case your PC is running seven at all is not downloading, then you can start the operating system in safe mode. After the BIOS start window appears, press F8 on the keyboard (for laptops there may be another key, for example, Del or one of the function keys). This action will cause menu of alternatives loading sevens.

In this menu, select the item " Safe mode”And continue by pressing Enter, after which the system will start in safe mode.

If the system has successfully started in safe mode, then start the recovery of the seven, as shown in the previous example. In this mode, for maximum security many features disabled OS, including the Windows Aero graphical interface. This is how the running program "" with the command " system properties protection” on a system running in safe mode.

We return the computer to working capacity using the installation disk or bootable USB flash drive

If the two previous examples do not help you, then you will need to restore the seven installation disk or flash drive. For computers that do not have an optical drive, you need to use a bootable USB flash drive with the OS. A bootable USB flash drive can be created using special utilities. The most popular utilities for this purpose are Windows USB/DVD, Download Tool and Rufus.

Boot from the installation disk or via a USB flash drive. In the start window of the installer, click the Next button and proceed to the next window.

After searching, select the OS you want to restore and click Next.

In the window that appears, select the same item " System Restore».

This action will launch the seven recovery utility. In the utility, click the Next button. This action will take you to restore point list. We choose a suitable point and continue.

A window will appear in front of you, as in the first example. Therefore, we press the Finish button and respond to the message, after which we will start the recovery.

After a successful rollback to the previous state, you will receive the following message.

Windows 7 Disaster Recovery with Antivirus

If your PC is infected viruses that interfere with the correct operation of the computer and the first three examples considered do not help you, then a good way to restore in this case would be an anti-virus life disk from Dr.Web. With this disc you can clean the system from all kinds of dangerous software. In addition to cleaning, Dr.Web LiveDisk can disinfect infected objects, which are necessary to restore Windows 7.

The Dr.Web LiveDisk image can be used both for recording onto an optical disc and a flash drive. To use Dr.Web LiveDisk on a USB drive, you need a special program. You can download the program for writing to a USB flash drive and the image itself on the official website by going to the page www.freedrweb.ru/livedisk.

Let's start the recorded image on the disk, setting it in the BIOS as the first boot.

In the start window of the bootloader, select first item Dr.Web LiveDisk and press Enter. These actions will start downloading Dr.Web LiveDisk.

After downloading Dr.Web LiveDisk, we will get a full Linux-based operating system. As it was written earlier, the main purpose of Dr.Web LiveDisk is to clean and cure of virus software. Therefore, antivirus is built into this OS. Dr.Web CureIt!. This antivirus is launched along with the OS.

Let's click in Dr.Web CureIt! button Start scan, which will start scanning, cleaning the system and disinfecting viruses.

After verification, Dr.Web CureIt! delete or disinfect infected objects.

Since there will be no more malicious code in the system, you can safely restore the system in three ways, which are described above.

If after checking the system files you cannot restore the Windows 7 system, then the only reasonable solution is to make a full backup of the information and reinstall the system again.

How to make a system image in seven

Another recovery feature in Windows 7 is creating a system image. In this image, you can save all the information on the hard drive, including the operating system. By restoring in this way, you will receive an OS with the same parameters as on the day the image was created.

Run " Control Panel' and go to the tabs ' system and safety», «»

In the window that opens for creating an image, specify the location to save it and click Next.

In the window that appears, it remains only to click the button Archive, which will start the process of creating an image.

You can restore the created image with Windows 7 and all information on local drives using the installation disc. The principle of recovery is shown in the second example, only when choosing a recovery method, you need to select " Restoring a system image” and specify its location on the saved drive.

Alternative methods for restoring the Windows 7 operating system

In addition to the standard recovery methods, there is an alternative software that does the same function. The most interesting solution that allows you to restore the system is the program Acronis True Image 2016. This is a proprietary software package from Acronis.

First of all, let's download and launch Acronis True Image 2016 from the shortcut on the Desktop. When launched, the program will ask for a username and password.

Now let's set up Acronis True Image 2016 so that he can do full disk backup with Windows 7. This setting should be done immediately after installing the OS, so that while using Windows, you can restore functionality from several backup copies of the system created in a certain period of time. So let's get started with the setup. To do this, select the type of storage by clicking on the link "".

In the window that opens, select the storage " Acronis Cloud».

Now let's create a schedule for our backups. To do this, press the button " Options” and go to the storage settings settings. On the first tab, select the schedule you like for creating backups of our system.

As you can see, the entire computer is selected as the backup source. Therefore, in the schedule set by us, a backup copy of the system will be created in the cloud storage " Acronis Cloud».

For an example of recovery, let's take an archive copy not from the Acronis Cloud cloud storage, but from the hard drive. If a backup was created on the computer, then Acronis True Image 2016 he will find her.

So we press the button Repair your computer, after which the program will completely restore the system to the state that it was when the backup was created. Also, if you are unable to start Windows 7 on a computer, Acronis True Image 2016 there is a boot image for this that can be burned to disk.

You can download this image on your account page. You can get a password and login on the official website www.acronis.com. The principle of the bootloader is the same as with the desktop version. Load disc from Acronis True Image 2016 on the computer, you can set it in the BIOS first when booting.

From the example it turns out that the utility allows full control over the creation of PC recovery copies and back up your entire system to the cloud.

Acronis True Image 2016 boot disk example

To start a disc Acronis True Image 2016 when starting the system, you must set the boot mode from the optical drive to the first in the BIOS. For example, for the MSI A58M-E33 motherboard, these parameters in BIOS mode look like this.

Another way to boot is to use hotkeys to call up the BIOS boot drive menu. For example, for the MSI A58M-E33 motherboard, the hotkey is the F11 button. By pressing this button, we will launch a special mode in which, when the system starts up, drive boot menu in BIOS.

After booting from the Acronis True Image 2016 disk, we will get to such a menu.

In this menu, select Acronis True Image 2016, after selection, the program will start.

The example shows that starting the boot disk Acronis True Image 2016 using the desired BIOS mode is not at all complicated.

Summing up

In this article, we have analyzed almost all the methods and parameters system recovery. We also looked at ways to restore the seven with alternative software and with the help of an antivirus. Which way to choose to restore Windows 7 depending on the situation is up to you.

Summing up, I would like to note that they mainly disrupt the operation of the OS viruses and experiments with different illegal software. Therefore, so that you do not have to constantly restore the system, use only proven and licensed software, and also use reliable comprehensive anti-virus protection.

I would also like to note that the examples considered in the material will work not only on Windows 7, but also on more modern operating systems, such as Windows 8 and 10 . And we, in turn, hope that our material will allow you to properly restore Windows 7 and you can say with confidence that I can do system restore.

Related videos

If Windows stops loading, then you can use standard utilities to restore correct operation.

One of the main nightmares of computer enthusiasts is to face a situation where they cannot turn on the device. The operating system starts to load, but eventually displays a message like: “Windows updates could not be configured, changes are being rolled back, do not turn off the computer.” After that, nothing new happens anymore - the software fails to recover, and the download stubbornly does not help.
Free online course "Windows 10 Simple Steps" Learn the basics of working with the Windows 10 operating system in our free online course. Short visual lessons will greatly facilitate the daily use of the PC.

System recovery tools

Before the release of Windows 7, this situation turned into numerous dances with a tambourine, and often even a complete reinstallation of the operating system. Now everything is different, and often the problem is solved by standard tools from Microsoft, which do not even need to be specially installed. The task comes down to being aware in principle that such tools exist, as well as to banal mindfulness about it when the “irreparable” suddenly happened.

The trick is to start the computer, even before the Windows boot icons appear, to have time to get into the advanced options of this very boot, where it will be possible to run diagnostics and, if necessary, restore the system to the selected checkpoint. In Windows 7, it was required to press the function key at boot F8, then select the “Troubleshooting” option (although in rare cases the “Last Known Good Configuration” option saved).

Additional Windows 7 Boot Options

Once in the “System Recovery Options” menu, in most cases, one of the first two options became the salvation. “Startup Repair” could save the operating system automatically, and “System Restore” required you to manually select a checkpoint to which the rollback will be performed.

Windows 7 System Recovery Options

In order to be able to restore it to its initial state in the event of a malfunction of the operating system, it is necessary to make a recovery disk in advance.
Microsoft would change itself if, with the update of its offspring, it would leave all the useful tools in the old way. Windows 10 system recovery is carried out by pressing “hot keys” Shift+F8, and, unlike the “seven”, you need to press this combination very, very quickly, since the operating system itself began to load much faster.

The appearance of the saving menu has also undergone changes. By selecting “Diagnostics”, in “Advanced Options” there are already familiar to us “System Restore” and “Startup Repair” (only in a different order). There is also an option to "Revert to a previous build" if you upgraded to Windows 10 from a previous version of Windows.

If Automatic Repair Didn't Work

Restoring a Windows system to one of the past checkpoints is not a difficult task. It is only important that these points themselves exist in the system, because sometimes users themselves manually disable their creation, at the same time deleting the existing ones. It really makes sense to clean out old checkpoints from time to time, as they take up a lot of space. But abandoning restore points altogether is a risky business.
How to navigate the Internet without picking up viruses? Secure DNS servers will help.
To make sure that restore points are automatically created for you or to make changes to the corresponding settings, you need to select the “Large icons” icon display (or Small, but not Categories) in the “Options” window and select the “Recovery” item. There, already select “System Restore Settings”, check whether protection is enabled and, if necessary, use the “Configure” button. Here you can manually create a point for subsequent recovery.

If we have restore points, then using the method described earlier, that is, using the built-in Windows system restore tools, you can quickly roll back to an earlier state of the computer without losing important files.

As a last resort, you will have to restore the system to its original state or to a previously created system image. It is desirable to create a “System Image” and “System Recovery Disk” in a working state of the operating system, after you have installed all the applications you need. This is all done through the same “Control Panel” (they are also “Settings”), when browsing by “Categories”, selecting “Backup and Restore (Windows 7)”. Here you can also restore the operating system to a previously created image if the computer is still booting, but has already stopped working as it should.
With each release of the operating system, Microsoft asks users for more and more information. But you can moderate her appetites.

Restoring a laptop to factory settings

If standard tools do not help, and you do not have a disk or USB device with a recovery image, then laptop owners can use the “hot keys” to launch the built-in recovery utility. Some models may even have a separate key for these purposes, for example, Lenovo's OneKey Recovery, but this is rather an exception. In other cases, it is important to know exactly which “hot key” is for your laptop, since it tends to differ from manufacturer to manufacturer.

Hot Keys for Notebook Manufacturers:

• F3– MSI;
• F4– Samsung;
• F8– Fujitsu Siemens;
• F8- Toshiba;
• F9- ASUS;
• F10- Sony VAIO;
• F10- Packard Bell;
• F11- HP Pavilion;
• F11- LG;
• F11- Lenovo ThinkPad
• Alt+F10- Acer (before that, select in the BIOS - Disk-to-Disk (D2D));
• Ctrl+F11- Dell Inspiron;
• Hold down [ alt] - Rover.

The factory utility will restore the device to its original state, as if it were fresh from the store. This will delete all programs with settings, all files, including favorite photos, which it makes sense to store in cloud services just for such cases. However, the device will be able to work again, and in some cases this method will simply help prepare the laptop for subsequent resale or transfer to relatives.

How to restore the system on an Asus laptop

Restoring a laptop system is a process of returning to its factory settings. As practice shows, the factory settings of the laptop are the most suitable for your Asus laptop model. They are created taking into account all the parameters and power of the laptop, so returning to them is a good idea.

If you have already dealt with similar operations before, then you can handle this one, but if you are not sure, then it is better to contact the best Asus service center, to computer specialists.

System Restore will not work if:

Have you reinstalled Windows at least once? During the installation process, the necessary files for system recovery are deleted.

Do not refer to the fact that your Windows OS was reinstalled by the master, because most likely he could also delete this file we need.

In this situation, you have no choice but to find or buy a disk with the restoration of native settings. It can also be downloaded from trusted sources using the Internet.

We will tell you how to restore the Asus laptop system if you have not reinstalled your version of Windows. In order to perform a system restore via BIOS on an Asus laptop, you need to perform preparatory work.

Preparing for system recovery

1. If there is important information on the computer, then it must be thrown onto a USB flash drive. This is especially true for files on the C drive.

You can not delete anything from Disk D, but to protect yourself, discard important files from this disk as well.

1. Remember that the Windows version will also restart.
2. This procedure will take some time after the computer is first turned on for it to install all the necessary settings on the laptop.

ATTENTION!!! You will not solve all laptop problems with a system restore. Make sure you need this operation at all. By consulting with a professional before starting recovery.

This operation is not difficult. You can manage on your own.

How to run system restore on Asus laptop

Ready! Now your computer is like fresh from the store. Happy use.

Good day everyone!

Why memorize something you don't need every day? It is enough to open and read the information when you need it - the main thing is to be able to use it! I usually do this myself, and these keyboard shortcuts are no exception ...

This article is for reference, it contains buttons to enter the BIOS, to call the boot menu (it is also called the Boot Menu). Often they are simply "vital" when reinstalling Windows, when restoring the computer, setting up the BIOS, etc. I hope the information will be relevant and you will find the treasured key to call the desired menu.

Note :

1. The information on the page will be updated and expanded from time to time;
2. You can see the buttons for entering the BIOS in this article (as well as how to enter the BIOS in general :)):
3. At the end of the article, examples and explanations of abbreviations in the table, decoding of functions are given.

LAPTOP

PERSONAL COMPUTERS

REFERENCE (on the above tables)

BIOS Setup (also Enter Setup, BIOS Settings, or simply BIOS)- this is the button to enter the BIOS settings. You need to press it after turning on the computer (laptop), and it is better several times until the screen appears. The name may vary slightly depending on the manufacturer of the equipment.

Boot Menu (also Change Boot Device, Popup Menu)- a very useful menu that allows you to select the device from which the device will boot. Moreover, to select a device, you do not need to enter the BIOS and change the boot queue. That is, for example, you need to install Windows - you press the button to enter the Boot Menu, select the installation USB flash drive, and after rebooting, the computer will automatically boot from the hard drive (and no extra BIOS settings).

An example of a Boot Menu is an HP laptop (Boot Option Menu).

D2D Recovery (also Recovery)- Windows recovery function on laptops. Allows you to quickly restore the device from a hidden partition of the hard drive. To be honest, I personally do not like to use this function, because. recovery in laptops is often “crooked”, it works clumsily and it is not always possible to select detailed settings “how and what” ... I prefer installing and restoring Windows from a bootable USB flash drive.

Easy Flash - used to update the BIOS (do not recommend for beginners ...).

System Information - system information about the laptop and its components (for example, this option is available on HP laptops).

PS

For additions on the topic of the article - thanks in advance. Your information (for example, the buttons to enter the BIOS on your laptop model) will be added to the article. All the best!