How to turn on bluetooth on a beech. How to enable bluetooth visibility on laptop

30.09.2019 Programs

Instructions

However, in order to fully enjoy all these convenient and pleasant features, you must first enable bluetooth and configure it. First of all, make sure that bluetooth is actually present on your laptop. Most manufacturers have very similar laptop models, which have different possibilities in an identical case, and it is bluetooth that this may concern in the first place. The presence of a bluetooth power button and even a brightly glowing indicator are not proof of the presence of a bluetooth module in a laptop. The fact that this model is really equipped with bluetooth is evidenced by a sticker on the case with the corresponding marking confirming the licensing of bluetooth.

If bluetooth is present, then you just need to turn on bluetooth. Often bluetooth is turned on by the same antenna icon button as wifi. In other cases, bluetooth can only be turned on programmatically, for example, by right-clicking on the bluetooth icon in the tray and selecting "Enable". Of course, the required drivers must be correctly installed for this. If necessary, use the website of the laptop manufacturer or the driver disc that came with your computer.

We install the USB-module into the corresponding socket on the computer case. As a rule, correct installation is confirmed by a color signal on the keychain body, usually.

The matter does not end with the installation of drivers, but only begins. Now you need to actually configure bluetooth. To do this, you can either use the program supplied with the module, or try to do it yourself in the Windows Control Panel. In any case, the process is quite simple: you need to specify the name of the computer and its type (by default - "personal computer"). This data will be used to map the computer to other bluetooth devices, such as a mobile phone, when searching for available devices.

The setup is complete. Now the computer will be detected when searching for bluetooth devices from the phone, and you can transfer photos to it, download music found on the network to your phone, or use the phone as a GPRS modem.

To turn on Bluetooth on a laptop running Windows 10, find the enable button for this function, which is located in several places at once. Also, if you switch to airplane mode, Bluetooth will be turned off automatically. In some laptop models, to turn on Bluetooth, you need to move the hardware Wireless switch to the On position (for example, this principle of turning on Bluetooth applies to the SonyVaio model). If this is not done, then you will not see the Bluetooth settings in the system, even with the correct drivers installed. It used to be a common use of turning on with the Fn + keys and the Bluetooth icon, but on the latest models, this method of turning on Bluetooth is rare.

There is a way to enable Windows 8.1, which is only suitable for this version of the operating system. To do this, open the Charms bar (it is on the right) and click on the Settings button, and then on Change computer settings. Select "Computer and Devices", and in this menu - the sub-item Bluetooth. If you do not see this item, go to other methods. After selecting the specified sub-item, the Bluetooth module will automatically enter the state of searching for devices and the laptop itself will be available for searching.

You can turn on Bluetooth on Windows by opening the panel on the right, hovering the mouse pointer over one of them and clicking the Settings button. There, select Change PC settings, and in it - Wireless network. The wireless modules control module will open, where you can turn off or turn on Bluetooth.

It is no longer possible to imagine modern mobile technology without bluetooth technology. A simple, convenient and fast connection of a wide variety of devices at a distance of up to several meters allows you to transfer video or music from one phone to another, connect a headset or a GPS module.

Naturally, the owner of a bluetooth-enabled mobile device has a desire to do without the inconvenient one when connecting it to a computer. Fortunately, setting up bluetooth is not difficult. Of course, it is rarely equipped with a built-in bluetooth-module, but a USB-module is easy to purchase and, besides, its price is quite low. Outwardly, such a module resembles an ordinary one.

We install the USB-module into the corresponding socket on the computer case. As a rule, correct installation is confirmed by a color signal on the keychain body, usually blue.

Windows will detect the device and try to install drivers for it. It is better to take the drivers from the disk that comes with the module. As a rule, it has an installation program in the form of a wizard that is familiar to the user, which will guide you through all the necessary steps, copy files and make changes to the registry.

The matter does not end with the installation of drivers, but only begins. Now you need to actually configure bluetooth. To do this, you can either use the program supplied with the module, or try to do it yourself in the Windows Control Panel. In any case, the process is quite simple: you need to specify the name of the computer and its type (by default - "personal computer"). This data will be used to display the computer on other bluetooth devices, for example, on a mobile when searching for available devices.

Adjust your computer's visibility to other devices. You can make it visible or hide its presence in the bluetooth space. In addition, you can select the services that will be available via bluetooth. Adapters support all services, so everything can be left enabled.

The setup is complete. Now the computer will be detected when searching for bluetooth devices, and you can transfer photos to it, upload to one found on the network, or use the phone as GPRS.

Bluetooth (or "bluetooth") is a manufacturing specification for wireless personal area networks. Bluetooth allows you to exchange information between pocket and regular personal computers, mobile phones, printers, digital cameras, laptops and other devices quite reliably, inexpensively and affordable. Thanks to Bluetooth, these devices can communicate while being within a radius of each other from 1 to 10 meters, even in different rooms. To fully understand these pleasant and convenient features, you must first enable and configure on your laptop.

Instructions

First, make sure you have bluetooth on your. Currently, a large number of models are produced with identical housings, but different capabilities. That is, if on one laptop a glowing indicator indicates the presence of bluetooth in it, then on the other it may be completely different. The fact that it is equipped with bluetooth can be evidenced by a sticker with the corresponding marking glued to the case.

If bluetooth is on laptop is, then you just need it. You can do this using the button on the left above, press F6 or right-click on the bluetooth icon and select "Enable". Mandatory for this on laptop must be properly installed. If necessary, read additional information on the website of your manufacturer.

How to turn on bluetooth on a Windows 7 computer: prerequisites

The first, and most important, condition is that in the computer device itself there must be an installed radio module, so to speak, in an iron version. No virtual devices or additionally installed programs will work without such equipment.

The second condition in solving the problem of how to turn on bluetooth on a computer with Windows 7 is that for the installed device, the corresponding drivers must be installed in the system (control software, without which the equipment is not something that will not work, but the system not recognized).

Module activation options on laptops

Let's leave aside stationary computer terminals for now, for which in most cases it may be necessary to install an additional external adapter. Better consider turning on Bluetooth for a computer that is a laptop or laptop.

Most modern devices of this type are initially equipped with a similar wireless communication module. You can check its presence at least according to the information on the label located on the back of the laptop. If it really exists, additional parameters of the supported connection will be indicated for it (for example, the Bluetooth version itself).

Most often, the question of how to turn on bluetooth on a computer with Windows 7 (as already clear, we mean laptops) comes down to using special buttons or switches on the main or side panels, or key combinations based on combinations with the Fn button (optional the F1-F12 keys can be used).

Software

When it comes to software, you don't have to go far. In Windows, when you try to transfer a file to another device via PCM, you just need to select the appropriate menu item, after which the available devices will be detected and identified.

Note that your computer will have exactly the label that is displayed in the system properties when you call them through the RMB on the computer icon.

However, many users prefer third-party programs, rather than system tools, considering them, so to speak, somewhat antediluvian. Indeed, it is much better and more convenient to use utilities like Widcomm Bluetooth or BlueSoleil.

The first program is best for establishing a connection between two PCs. The second serves to connect between all available devices. In other words, it supports the simultaneous detection of a mouse, a gamepad, and a mobile phone or tablet, while the means of the operating system itself or most other programs do not allow this.

How to set up with Windows 7 or another system?

If we talk about the main parameters and settings, in Windows all this is automated, and something can be changed only through intervention in the system registry or using additional optimizer programs.

But if you install bluetooth in Windows 7 or in any other environment as a separate applet, you can, as they say, dig deep enough in the settings. The most important thing is to set the data exchange rate without any restrictions on transmission and reception. Many utilities, including the above ones, make it possible to perform such actions in a completely elementary way. As an additional option, you can set restrictions or permissions on the size of the transferred files, change the initialization, or select preferred and ignored devices. All this needs to be tried in practice.

What's the bottom line?

It remains to add that the question of how to turn on bluetooth on a computer with Windows 7 is completely elementary. What do you prefer to establish a connection between devices? It seems that the best option is still to install additional third-party software, since the built-in tools of the Windows systems themselves are extremely limited and do not have in their arsenal the tools that are offered by the developers of third-party applications, although their use looks somewhat simpler in terms of organizing transmission or reception some objects. But even such Windows tools, sadly, can fail at the most inopportune moments, which in most cases was not noticed for separately installed applications.

However, giving advice on using a particular tool as a preferred one is completely ungrateful, therefore, the issues of choosing tools are ultimately submitted to the user of a computer system or mobile device for consideration.

Many modern laptops are equipped with a Bluetooth wireless adapter for data transfer. It allows us to use ordinary radio waves (short range) to connect to a wireless network and get full access to peripheral devices: printers, mice, phones, communicators and other computers. This is very convenient, since these devices can be moved within the range of reliable reception and automatically maintain communication. "How to set up Bluetooth on a Windows 7 laptop?" - this question is devoted to this review.

Setting up Bluetooth in Windows 7 begins by reading the laptop's specs and making sure the laptop has a built-in adapter and is turned on. Install the appropriate drivers before starting the setup. Then we run "Add Device Wizards" to automatically detect a new device. To do this, you need to press "Start" and type in the search bar "Devices".

Find "Device Manager" and search for new devices in it (RMB-> "Update hardware configuration")... If the result is positive, then the wireless adapter will be displayed in the list (usually in the corresponding item “Bluetooth”). When the adapter is on, it the indicator light should turn blue, when it is turned off, change the glow to yellow, and when the power is turned off and the laptop goes into sleep mode, it will go out completely, interrupting the connection.

To further configure Bluetooth in Windows 7 on a laptop, open it from the system tray and find the "Options" item. The visibility of the computer, by default, will be disabled, which prevents unnecessary power consumption. Enable this option. The laptop should now be visible to other devices such as smartphones. To create a paired Bluetooth connection pair, we will use another menu line - "Add device"... A list of detected, visible devices will appear. We need to select the one we need and click “Next”, while the system will ask for the corresponding security password, which is set in the connected gadget. The time allotted for entry is limited. Keyless devices (headphones, mice) will be connected without a password, you just need to specify the desired connection option.

We've covered in some detail how to set up Bluetooth on a Windows 7 laptop.... After operations in the Bluetooth icon menu the line “Show Bluetooth devices” should become active... When you go there, you will be given the individual right to control the connected wireless devices. Problems with connection and communication can arise when the devices are far from each other (more than 7-10 meters), with dead batteries and incorrect settings. Check all parameters of Bluetooth devices for their visibility... If everything you have done is done correctly, then the devices will find each other and begin to exchange radio signals.

The last note will concern one more setting that can interfere with the connection of devices in this OS. If during all dances with a tambourine the connection is not established, then you should go to the “Bluetooth Settings” again and go to the “Discovery” tab. There click (if this option is not enabled) on "Allow Bluetooth devices to find your computer".

Now you know exactly how to set up Bluetooth on Windows 7 - apply your knowledge and enjoy a wireless connection.

Watch the video on YouTube: "How to set up Bluetooth on a Windows 7 laptop".

Bluetooth is a derivative of a wireless network used in various digital devices, devices for transmitting and receiving information at close range.

Examine your laptop keyboard. In many models, the Bluetooth function is built-in, and manufacturers put the direct power button on the keyboard panel. It can be located on the side or top of the panel and have a traditional designation. The corporate Bluetooth badge looks like an angular "B" with a side tick and is encircled in an oval. To turn on the Bluetooth function, just press this button briefly. In this case, the indicator light should light up. At the same time, a branded icon will be displayed in the lower right corner on the laptop desktop and a notification about bluetooth activation will appear.

If suddenly you did not find a button (or it is not provided), you can turn it on using the software menu of your laptop. To do this, open the "Start" menu, then go to "Control Panel / Device Manager". Open the Bluetooth Devices column. After that, the only thing left in the dialog box is to enable the function and make the necessary parameter settings for further data exchange.

In most cases, when buying a laptop, store managers tell you that this function is present in the model. But in fact, words sometimes differ from facts, and instead of Bluetooth, the laptop has a simple program to amplify the Wi-Fi signal. Therefore, carefully look at the stickers on the laptop case. They usually indicate the presence of the Bluetooth function.

It is believed that today, bluetooth is available in all laptop models, but this may not always be the case. In order to enable bluetooth on a laptop, you need to know if you have a bluetooth adapter. In the event that it is not on the laptop, then you need to purchase it, because there is no other way to use bluetooth. Buying such an adapter is quite justified, since sometimes it is easier and faster to transfer some files from a computer to a phone (or vice versa) using the bluetooth data transfer method.

Turn on bluetooth adapter

As mentioned above, the first step is to make sure that you have a bluetooth adapter installed. Sometimes the store may indicate that it is, but in fact, everything turns out to be the other way around. There is only software, thanks to which the data transmission signal is amplified. Most often, you can find out about the presence or absence of a bluetooth adapter by a sticker on your computer. Alternatively, you can use the task manager on the computer itself. If you have a built-in bluetooth adapter, it will be displayed there.

After you make sure that you have a bluetooth adapter, you need to find the bluetooth power button. Most often, it turns on in the same way as Wi-Fi, which means that you need to look for a button in the form of an antenna or with a bluetooth icon. In the event that the bluetooth start button is assigned to the function keys (F1, F2, etc.), then to turn on the adapter, you must use the Fn button + bluetooth start key (for example, F3). In some cases, bluetooth can only be launched from the computer itself by clicking the corresponding icon and selecting the "Enable" inscription.

The last steps

For full-fledged operation of the bluetooth adapter, you must install the appropriate drivers. It is thanks to them that bluetooth will work properly on a laptop. In most cases, the required drivers are included with the laptop. Installing them is easy. To do this, you just need to insert the disc into the laptop drive and follow the instructions given.

As a result, after turning on and configuring bluetooth on a laptop, all that remains is to turn it on on another device (

For some it may seem strange, but the question of how to turn on Bluetooth on a laptop is quite relevant today and we will tell you how to do it.

Even despite the fact that Wi-Fi technology is now very common, communication on the device in question is simpler. If you need to transfer documents or media files, you can always use the Bluetooth technology.

Primary tasks

Before connecting (on) Bluetooth on a laptop, you should install the accompanying software. It can be either the drivers themselves or their combination with system utilities. As a rule, the software comes bundled with the laptop, but sometimes it is not. Therefore, it becomes necessary to download via the Internet:

After that, you can move on to the question of how to enable the wireless network. So, you can activate (run) Bluetooth on a laptop in several ways. The easiest is to use a function key or key combination. Activation is also possible through the system tray.

After that, you need to configure the radio module to work with other devices. So how to open Bluetooth on a laptop to connect gadgets? To do this, find the device icon in the tray and click on it with RMB. This will open all the available options for working with it:

adding a new device;
overview of existing connections;
connection to the personal network PAN;
adapter parameters;
turning off the radio module;
removing an icon from the tray.

In the settings, you should allow gadgets to detect your PC. After that, you can safely use the wireless network.

Checking and restoring

It is important enough to know how to check Bluetooth on a laptop. It does this through the device manager. It can be launched in any convenient way. Information about the device is located in the "Network adapters" branch.

No less relevant is the question of how to restore Bluetooth on a laptop. The operation is carried out in the same dispatcher. In this case, select the radio module from the list by clicking on it with the RMB. The next step is to reconnect the device and update the hardware configuration.

Before proceeding with the study of the question itself, we will find out what Bluetooth is and how it works.

What is Bluetooth? This is a module for wireless data transmission. They can be voice, streaming (audio) and regular files. It works in two modes: both as a receiver and as a transmitter. This wireless device is indispensable for transferring files from your smartphone to your computer.

The Bluetooth adapter can be of different revisions or versions, starting with 1.0, which came out in 1998 and had a number of compatibility problems, and ending with version 4.1 with low power consumption and high speed.

In mobile computers, the wireless module reduces the battery life of the device. Therefore, manufacturers have provided both hardware and software to enable / disable these modules. Below is the instruction on how to enable bluetooth adapter on laptop.

How to find out if a laptop has bluetooth

You can try to turn devices on or off, puzzle over why it doesn't work. But it just might not be in the laptop.

There are several ways to check the availability of a function on a laptop.

by laptop part number;
by the corresponding stickers;
by the presence of the bluetooth status indicator.

The part number is the full name of the laptop model. For example, if we are talking about ASUS, it will look something like this: X102BA-DF010H. By entering this number in the search on the manufacturer's website, you can find out if the laptop has this function.

Be careful and carefully check if all letters and numbers match your model. A number with one slightest difference may correspond to a completely different laptop.

Sometimes laptop manufacturers indicate the availability of additional options with stickers. So, a sticker with the bluetooth model and version can be glued to the bottom of the case. If there is such a sticker on the bottom of your computer, then everything is in place.

If there is a small bluetooth logo on the indicator panel of the laptop, this is a sure sign that it is present in this laptop. If it is not there, then you need to examine the keyboard for hot keys to enable this option. But the surest way is to check by the partner number, which never lies.

Bluetooth in BIOS

Sometimes after changing the hardware configuration, after reinstalling the OS or after other manipulations with the computer, the system does not see wireless devices: neither bluetooth nor Wi-Fi modules. It is a sure sign that these modules are disabled by software through the BIOS.

How to turn on bluetooth on a laptop in BIOS? You can do the following:

go to BIOS. To do this, you need to hold down the DEL or F2 key when starting the laptop. In the latest versions of laptops, the ESC or F1 keys are used to go to the BIOS;
check the status of the bluetooth module. Opposite the value "bluetooth" should be "enable". If "disable" is displayed, change the value. If it is impossible to turn it on or off in the BIOS, it means that it is constantly active. If you can't see it when loading the BIOS, you need to flip through the pages and menus;
be sure to save the settings change and restart your computer. After that, the OS will detect a new device and request a driver.

Video: How to enable wifi on an Asus laptop

How to turn on bluetooth in a laptop

First you need to install the drivers provided by the manufacturer. Even if after installing Windows, standard drivers are embedded in the system, they may not work correctly with different device models. You need to download drivers only from the official websites of laptop manufacturers.

The standard way is:

in the notification area, click on the oval Bluetooth icon;
in the menu that opens, click enable / disable Bluetooth.

Inclusion methods

Basic tools:

using hardware buttons;
using the keyboard;
through the OS control panel;
from the command line.

Some laptop models have hardware switches. If it is there, you need to move it to the "ON" position. These switches are often found in premium notebooks such as the Sony VAIO.

Keyboard shortcut

Almost all laptops are equipped with the FN key, which is always used to access additional features of the laptop. Combined with others, this key can control the speaker volume, display backlight brightness, and auxiliary equipment on and off.

You can enable bluetooth in a laptop using the key combinations FN + the key with the bluetooth icon. This key is usually F3. Often bluetooth and Wi-Fi are one module. Accordingly, they are also turned on and off together with the FN + F5 key combination. Next, we will consider how you can enable this module without a keyboard.

How to enable without keyboard

If the keyboard does not work, the adapter can be turned on without it. Different OS versions provide different ways to programmatically enable wireless devices. Let's consider the simplest and easiest ways for each operating system. Let's start with the freshest.

It's also very easy to do this in Windows 8.1.

In Windows 8, this is just as easy:

In Windows 7, the easiest way to monitor the operation of bluetooth is using factory utilities, which often come with a laptop, or are available for download from the website of the computer manufacturer. The interface of such programs is extremely simple, and they do not need explanation.

It is also convenient to control the state of the bluetooth adapter using a special icon to the right of the taskbar. By right-clicking on this icon, you can access the various modes and capabilities of the adapter. You can turn it on and off, pair with devices, control data transfers, and more.

If these methods do not help, make sure that the bluetooth module is enabled in the device manager. Also check if the drivers are installed correctly.

For this you need:

open the control panel;
in the category "Administration" go to the item "computer management". The computer control panel will open;
by going to the "Device Manager" tab, you will be able to see all the devices and modules running on the computer. Find your bluetooth device.

If an icon with a question mark or an exclamation mark is drawn next to it, the drivers need to be updated or reinstalled.

It may happen that in nature there simply does not exist a driver for your bluetooth adapter for some older versions of Windows. For example, for XP, many laptop manufacturers do not test or even write drivers. You can work around this problem by purchasing an external bluetooth adapter.

Using the command line

Controlling the status of wireless devices is also possible from the command line. But this method is much more complicated than all of the above.

For frequent use, this process can be simplified a little. The command: "devcon enable ID" can be placed in an empty text file, which will then be saved with the * .bat extension. To enable the adapter, it will be enough to run this file with the command.

If there is no fn button

It is extremely rare that laptops lack the FN button. It is not so convenient to operate the laptop without the fn button. But, you can turn on Bluetooth without it. You can use software from different software vendors.

Some of them:

Lenovo ReadyComm - for Lenovo laptops;
ASUS Wireless Console - for ASUS laptops;
HP Utility Center is a comprehensive utility from HP for managing all devices, including Bluetooth;
Widcomm, AirShare is a paid and free third party utility.

These programs are extremely easy to use. For example, let's see how bluetooth is turned on via Widcomm software:

after installing the utility, a shortcut with the Bluetooth logo will appear to the right of the taskbar and on the desktop;
by clicking the right mouse button, a menu with a lot of possibilities will open. Among them there will be an item "Enable / disable Bluetooth-device";
by clicking on it with the left mouse button, the wireless adapter will turn on.

Also, in the absence of a function key, you can use the methods described above:

inclusion through the command line;
inclusion through the control panel;
switching on using hardware switches.

Bluetooth can be turned on in several ways. If you are not well versed in the work of a computer, then use a method that you understand. You shouldn't use the command line and other complex schemes.

If you are using Windows 8, then there should be no problems with starting the bluetooth module. All hardware manufacturers regularly update their drivers for this OS. In addition, the interface and operation with Bluetooth is user-friendly and free from any problems.

Today almost all laptops samsung r430, rv511, r540, rv509, rv520, r530, r525, np300e5a, np r60xe02, rv515, s3600i and others are equipped with bluetooth adapters - you just need to turn it on.

To enable bluetooth on a samsung laptop with windows 7 or windows 8, you need three things (sometimes only two).

First, the bluetooth driver must be installed on your laptop. If you yourself installed Windows 8 / Windows 7 or "wizards" that do not pay attention to the installed PC components, then the driver will not be in the system.

If you purchase a Samsung laptop with preinstalled Windows 7/8, and in the near future already Windows 10, then bluetooth must be configured, unless the sellers themselves install Windows in the store (in order to sell at a higher price), and not specialists from the manufacturer.

Second - on most laptops, including Samsung, on the device case (on the sides, on the front) there is a special button that turns on and off bluetooth (usually compatible with Wi-Fi).

Third, for convenience, the manufacturer programs the device to enable and disable bluetooth and Wi-Fi with the keys (when these interfaces are turned on, the battery will be drained).

Where to get a bluetooth driver for a samsung windows 7 or windows 8 laptop

There are four reliable (free) drivers on the Internet for downloading drivers for all Samsung devices.

The official site is considered the best (the first in the list below). On it, you need to find your model and calmly load what you need.

There are also two additional resources (private). It's also safe and virus-free.

The fourth option is the device ID. Here are links to these four resources. http://samsung.com/ru/support
http://driver.ru
http://notebook-center.ru

Choose any option, search for your model, download and install

Direct inclusion of bluetooth in samsung laptops on windows 7 or windows 8

As mentioned above, you first need to look for a dedicated button on the case. If such is provided, then this is necessarily written in the instructions.

If you do not have instructions, you can download it for free on the manufacturer's website in electronic form.

In addition to the button on the case, look for a key with a drawn antenna (usually this is the topmost row from F1 to F12).

This button does not work on its own. Usually it turns on bluetooth in combination with another - Fn (press simultaneously or at the beginning of fn and without releasing it, press the one with the antenna pattern).

Since new models of Samsung laptops are constantly being released, some other option is not excluded.

Therefore, if something does not work out for you, write in the comments - we'll figure it out. Good luck.

First, let's define what is Bluetooth? The people also call this device bluetooth, it serves to exchange information between various digital devices, such as phones and headsets for them, laptops, PDAs, cameras, tablets, the list can be very long, since a bluetooth device can be implemented anywhere, the most important thing is that it is very convenient and accessible for everybody. Possessing the "bluetooth" function, these devices can connect with each other at a distance of up to 10 meters, while the walls do not interfere with this. To get acquainted, and possibly a detailed acquaintance with the principle of its operation, you must first activate and configure bluetooth on your laptop.

Instructions on how to turn on and configure bluetooth on a laptop:

1. First you need to make sure that bluetooth is present on your laptop. Because at the present time, many laptops are produced with the same case, but they are different in terms of capabilities. For example, if in an ASUS or Acer laptop a burning light informs us that bluetooth is on, then in Samsung or HP this may mean a completely different function. You can also find out about its availability by a sticker glued to the body, it should have a characteristic icon in the form of the letter "B" or simply the inscription Bluetooth.

2. In the event that it does have it, then the matter remains only for small - turn it on ... To do this, press the button located in the upper left corner above the keyboard, you can also press F6 or Fn + 6, or right-click on the "Bluetooth" shortcut and select "Enable". For full-fledged work, special drivers must be installed on the laptop. If you have any questions related to the operation of the device "B", you can use the manufacturer's website.

3. To check the functionality, activate bluetooth on some other device (you probably have it in your mobile phone too). All detected devices with enabled and available bluetooth should appear in the program window. Establish a connection between devices by searching for a name, if necessary, enter the code.

4. For a lenovo laptop, you need to do the following: go to Start -> All Programs -> Accessories -> File Transfer. In some Samsung models, you just need it and it is automatically activated.

5. If all of the above actions were performed correctly, then you can safely exchange any information with any devices. As you can see, turning on bluetooth on a laptop is not as difficult as it initially seemed.