How to turn on apple watch after discharge. How to get started with Apple Watch, pair it and sync it with iPhone

If Apple device The Watch does not turn on and refuses to respond to button presses, try to figure out the cause of the problem yourself. With instructions and necessary tools, you can quickly troubleshoot simple problems. You can find out why the device does not turn on, check the integrity of the control board and the reliability of the contacts even without special skills.

Most often the device Apple Watch fails for the following reasons:

• the power button is broken
• moisture has entered the protective housing
• The watch is frozen after an update or due to a software glitch
• because of mechanical damage The watch display has broken down

A common reason why an Apple Watch device won't turn on is a low or damaged battery. In this case, the battery needs to be recharged or replaced. Hold the button on the side of the device and the wheel Digital Crown to restart the watch until the “apple” - Apple’s signature icon - starts to light up.

Why does the device not start?

If your Apple Watch suddenly stops turning on, the problem may be due to a settings issue. Pay attention to what appears on the screen Apple technology notifications. In them, developers describe problems and give options for eliminating them. If apple watch The Watch has run out of power, you should connect it to charger and wait for the company logo to appear.

If your Apple Watch stops turning on or responding to charging, you can fix the situation in the following ways:

• check the depth of insertion of the cable into the connector and the adapter into the socket
• take off protective film from the charger
• clean the device from dirt and dust
• restart the device (press the side button)

How to quickly reboot an electronic device

You can also check if the charging is working properly. If the Watch icon is lit, Apple charger should happen automatically. To restart your Apple device and make sure your installed apps are working properly, press the button on the side of your watch and press the Digital Crown.

A common reason why the Apple Watch does not turn on is that the power saving mode is running. In this case, tapping the screen will not start the clock.

What you need to know before you start restoring your device

To turn on your Apple Watch, press the power button located on right side devices. At the same time, you will notice that the “apple” is lit. The download time is determined by your Apple device model and is typically about a minute.

The iWatch device belongs to the category of mini-computers, installed applications which need to be updated periodically. Apple Watch users note that after updating the software, the devices begin to work faster. If you want to put your Apple Watch into battery-saving mode, hold down the button on the right side of the device until the Eco Mode slider appears.

No messages on display

The Apple Watch is unable to function after being discharged. The watch display on which notifications appear consumes a significant amount of energy. Often the reason why notifications do not appear on the device is that the clock is locked or the Do Not Disturb mode is activated. You can solve the problem in the following ways:

• remove the password that is keeping your Apple Watch from turning on and keeping your watch display locked
• make sure your Apple equipment settings are correct

Simple ways to fix devices

If you want to check if the charger is working properly, try restarting the watch. To do this, hold the Side button and Digital Crown for 10 seconds. If the charge icon is not visible, leave the Apple device connected to the charging device for several hours.

Simple ways to repair smartwatches that turn off spontaneously:

• drying devices
• replacing charger
• setting up Apple technology parameters

Complex troubleshooting options

If your Apple Watch stops turning on and you can't immediately diagnose the problem, the problem could be serious. The malfunction may be due to a failure of the button responsible for turning on the device, a malfunction of the microcircuit, or other reasons.

To determine the cause of the malfunction, you will need special equipment and tools. With their help you can perform the following repair operations:

• remove and replace the button responsible for turning on the Apple device
• update the software if the watch freezes or turns off spontaneously
• restore Apple watch power chip
• replace the charger connector

U Apple users Watch often encounters such problems - after discharge, the watch freezes or turns off. For forced restart press the side button and digital wheel Crown. If after a reboot the watch turns on, but you do not see that the “apple” is lit, or a notification appears with a red exclamation mark, this means that the device cannot be used due to a broken microcircuit or other parts.

An effective method for solving device problems

If your Apple Watch device does not turn on and you need professional help, contact the YouDo service providers. Specialists will quickly and inexpensively find out the reason why the device does not turn on, the clock is frozen or the power button has stopped functioning.

Cooperation with Yudu performers provides the following advantages:

• provision of on-site services to any specified address
• replacement of parts with original components
• 24/7
• experience in servicing all models of iWatch devices

Leave a request on this page, describing your problem (for example, “Watch logo is on, Apple is not charging”). Experienced performers will help you inexpensively any day of the week if your Apple Watch device does not turn on at all.

Autumn 2014 Apple company presented to the world “ smart watch» Apple Watch. When you purchase them, many actions will become available to you, provided that you have an Apple smartphone no older than model 5. The Apple Watch is connected to the iPhone and has the ability to share information.

Manufacturers took care of such functions as:

• sending messages ( voice control, the watch does not have a traditional keyboard due to its size);
• pulse diagnostics;
• ability to use Siri functions;
• reading simple emails their removal and selection;
• the ability to download music up to 2GB in size;
• synchronization with iPhone, exchange of information and applications supported with the Watch.

Display 1.5 inches or 1.32 in model with smaller sizes. Protected by sapphire crystal. Reacts to pressure.

On the side of the device there is a wheel button that you use to perform basic functions and a floating key at the bottom (for calls and messages). See photo.

2 core processor connected to GPU. Good enough navigation system provided using a GPS receiver. Communication occurs via Bluetooth and Wi-Fi. In 2016, Apple released the second watch Apple generation Watch Series 2.

Setting up your Apple Watch

If you are not using updated iPhone up to 5 (more early versions do not support watch operation), then Watch app updates are not required. Accordingly, if you follow updates on your smartphone, then they are also necessary on your watch. Before you start setting up your watch, make sure it is charged.

How to connect Apple Watch to iPhone

Let's look at how to create a pair with Apple Watch. To do this, follow your intuition and device prompts, you will easily figure out how to create iPhone linking and Watch.

So, if the watch is less than 60% charged, then it needs to be charged. The time spent on recharging will be equal to one hour, but sufficient recharging will be necessary while the devices are connected.

How to turn on Apple Watch

Press the button on the side. A language prompt will appear on the screen. After determining the interface language, the device will go into the mode of creating a binding to the smartphone.

Launch the Watch program and click the pairing button that appears, bring the phone camera to the image on the watch (the devices must be nearby while synchronization is in progress, as in the photo).

Then follow the iPhone's activation prompts. Set up as new or restore (if the watch is not the first) and select your hand (left or right). To use the Digital Touch and Handoff functions, you must enter Apple password ID. You will be prompted to enable iPhone search. Turn it on.

Synchronization

• Diagnostics, geolocation and Siri must be synchronized.
• Create a password and determine whether the iPhone will automatically reset the lock from the watch.
• When you click “Install all,” the programs from your phone will appear on the Watch; when you click “Later,” only basic information will appear. The synchronization time depends on the number of paired programs.
• When the previous operation is completed, the device will beep. You can always find a video review on this topic on the Internet.
• We install updates on the watch.
• Open “My Watch” in the Watch app
• Then “General” and “Software Update”
• Next, messages about updates will appear (if they are required, of course). Install following the prompts.
• If all compatible programs Apple Watch was not set up automatically from My Watch, you will have to download it manually.
• You can set up notifications by clicking on “Notifications” in the “My Watch” item.
• You can adjust the screen brightness through the “Brightness and text size” section.

How to use Apple Watch

The screen turns on when you bring the watch to your eyes and goes off as soon as you move your hand away. All answers to questions related to the use and installation of the clock can be found in the manual supplied with it. The instructions in Russian describe in detail how to use the watch. On the Internet you can find a video review on how to set up the binding or how to set the clock.

By activating the Activity App you can control physical exercise, Time relax. The device notifies you about the amount of time spent walking or being motionless and reminds you to change position. In the “Health” item, you can track your condition.

When you press the wheel on the side once (see first photo), the following becomes available:

• turning on the screen;
• you can go from the main tab to the watch face;
• return to the main page while in the application;
• activate Siri
• with the help of “Preview” you can always be aware of your important affairs.
• If the Watch does not turn on, it is better to reboot wrist watch. How to restart Apple Watch is described in detail in the instructions.
• You can configure it again, after which the devices start working, but you already know how to configure it.
• You can make an urgent call by pressing the side button or using voice command. It is possible to send a template message.

Apple Watch 2 can be immersed in water for up to 30 minutes and no deeper than 1 meter. At creation of Apple Watch Series 2 Apple manufacturers tried to accommodate requests modern man who wants to save time, but at the same time play sports, relax, work, and be aware of their affairs. But Apple warns against swimming with Apple watch Watch in salt water, while taking a shower in a smartwatch is not prohibited. The watch even works in water, as shown in the photo.

The watch does not have a camera for taking photos, apparently due to the fact that the entire smart mechanism is in a small metal box.

Description of how to unlink Apple Watch from iPhone

If you need to sell your devices or change your iPhone, you need to unsync them. You can do this without a smartphone by following a few simple steps:

• Zoom in on devices. Open Apple Watch.
• In the “My Watch” menu, go to Apple Watch and mark the letter “i” located opposite it.
• Next, click “Unpair with Apple Watch.” This way all data will be deleted.
• Another way to disconnect when the devices are not nearby.
• Let's go to the clock settings.
• Click “Basic”.
• Click "Reset".
• And we erase all the data that was synchronized. This resets the information to factory settings.
• A way to unlink your watch from your iPhone if you have forgotten your password.
• We charge the smart watch.
• Press and hold the wheel on the side until “Off” appears on the screen.
• Click on shutdown and click on the “Erase content and settings” that appears. The data is deleted and the devices will be unlinked.

Do you have a brand new Apple Watch? Congratulations! Sit back comfortably and put everything aside. You will have to: create a pair with an iPhone, update watchOS, customize the Apple Watch for yourself and, of course, install several cool apps. I will tell you about all this now.

My bad first time setup experience

Setting up the Apple Watch for the first time wasn't as fast as I expected. The process itself is very easy, but the speed of rebooting, charging and synchronizing takes some time. Therefore, having bought a new watch, do not think that you will set it up in 5 minutes in the nearest cafe over a cup of coffee and go for a walk around the city with it. In any case, it didn't work out for me.

I bought an Apple Watch at the airport with more than two hours left before boarding. And I spent all this time charging, setting up and updating watchOS.

The stumbling block was the charging itself. The watch was discharged into rubbish and did not even want to turn on. I partially charged them from a power bank. Doing it on the go is a challenge. The magnetic charger does not hold up well and constantly falls off the watch.

After charging the watch to about 20 percent, I began the installation process Apple couples Watch from the iPhone, but at the end of synchronizing the applications, the watch was discharged again and the whole process had to be started from the very beginning. Including the charging itself.

The second time everything worked, but updating to the latest version of watchOS took some more time. As a result, after almost 2 hours I received a ready-to-use Apple Watch with almost empty batteries, so I spent the next 2 hours of the flight again fully charging it.

But it's actually not that bad. You can connect your Apple Watch to your iPhone much faster if you don’t make my mistakes. On re-creation It took me 15 minutes to pair Apple Watch with iPhone. But to this time you need to add charging, time to install applications and watchOS updates. In any case, I recommend making coffee. Let's go!

How to connect Apple Watch to iPhone

You'll need a charged Apple Watch, a phone with Bluetooth running, and the Watch app. Pairing devices is very intuitive: the watch and phone themselves tell you what to do and where to press. To connect Apple Watch to iPhone, you need to do the following:

1. Charge your Apple Watch to at least 60%. Synchronization with iPhone and settings quickly eat up the battery. Yes and possible updates watchOS requires the watch to be charged at least 50%. This is very important point, which will save you a lot of nerves. It will take approximately 55–60 minutes to charge the Apple Watch from 0% to 60%;

1. Turn on your Apple Watch, holding the side button for a long time (if they do not turn on, then, most likely, they are very discharged and the Apple Watch needs to be charged again). The watch will immediately ask you to select the interface language and go into pairing mode with the iPhone.

1. Run Watch app on iPhone and click on the “Pair with Apple Watch” button and point the video finder iPhone cameras to the “galaxy” on the watch screen. The process is similar to scanning a regular QR code. That's it, your watch has met your iPhone. But that's just the beginning of the fun.

Follow prompts on iPhone to complete the pairing process. You will be asked to perform a series of actions that are already familiar to many iPhone activation or iPad.

Hand setup and selection. If this is your first watch, then click “Set up as new Apple Watch." If you've done the setup before, you can click Restore from Backup and follow the onscreen instructions. Then press "Left" or "Right" on your iPhone to select your hand.

1. Enter your Apple ID password to use features such as Digital Touch and Handoff. If Find My iPhone isn't turned on on your iPhone, you'll also be asked to turn it on.

1. P check the settings. iPhone Settings settings in the Diagnostics & Usage, Location Services, and Siri screens will be sent to Apple Watch and vice versa. Therefore, if the settings of these services change on one device, they will be updated on the second.

1. Create a password. If you click "Create Password" or "Add long password"on iPhone, you can create personal code using Apple Watch. Next, you need to decide whether the iPhone will automatically unlock the watch.

1. Synchronize programs. Click "Set All" to sync iPhone programs compatible with Apple Watch. Tap Later to sync only basic information, such as Mail, Contacts, and Messages.

The duration of this process depends on the amount of data being synchronized. Keep the devices close to each other until you hear a beep and feel a slight pulsation from your Apple Watch.

The clock turned on. What's next?

Next, you need to customize your Apple Watch. And I’ll tell you how to do this in my own personal example. In fact, my changes affect almost all settings, so by setting up the watch according to my instructions, you will immediately become familiar with all Apple settings Watch.

We will do all the watch settings through the Watch application for iPhone. Something can be configured directly through the watch, but working with a small screen is not as convenient as using phones. So open the Watch app again and let's get started.

How to update Apple Watch

First, you should check if there is new firmware for the Apple Watch and update to the latest one. For this:

1. Open the application Watch
2. Select "General"
3. Click "Software Update"

If there is an update for your watch, your iPhone will notify you about it. To install it, simply follow the on-screen instructions and your iPhone will do everything itself. But remember that to install, the watch and phone must be charged at least 50%.

How to install programs on Apple Watch

If you missed the item when setting your watch automatic installation all Apple compatible Watch programs, then you will have to install them manually.

All compatible programs are available in the “My Watch” tab and are divided into two categories: Apple software and everything else. To install the program on Apple Watch:

1. Open the application Watch;
2. Select any application from the list (below);
3. Tap Show on Apple Watch.

That's all. After a couple of seconds, the program will be installed on the Apple Watch and will appear in the list of applications.

In some applications you will see additional options like “Display in Preview”, etc. We will return to these parameters a little later.

How to Automatically Install Apps on Apple Watch

If a new application appears on the iPhone that has a version for the Apple Watch, it can be automatically installed on the watch. For this:

1. Open the application Watch;
2. Go to the “My Watch” tab;
3. Select "Basic";
4. Select “Install programs”;
5. Enable "Auto-install programs".

How to sort apps on Apple Watch

A list of all applications on the Apple Watch can be seen by single-clicking on the Digital Crown. There is always a circle of a clock icon in the center, and icons for other applications appear around them.

In order not to spend a long time looking for the right program, I place the most necessary ones around the clock icon, that is, in the very center. For this:

1. Open the application Watch
2. Go to the “My Watch” tab
3. Select "Appearance"
4. Place the icons in the desired order

How to set up notifications on Apple Watch

When necessary programs installed, I move on to setting up notifications. By default, they are completely duplicated from your iPhone. But I prefer to leave only the really important ones. Not only is this less distracting, but it also saves watch battery.

1. Open the application Watch
2. Go to the “My Watch” tab
3. Select Notifications

Scroll to the bottom and turn off notifications you don't want to see on your Apple Watch. I have a couple of dozen of these.

How to change the brightness of the Apple Watch screen

The Apple Watch does not have manual brightness adjustment in the usual sense; it always changes automatically depending on the ambient light. But you can choose one of three algorithms automatic brightness. This can be done both on the watch itself and in the Watch app on the iPhone.

1. Open the application Watch
2. Go to the “Brightness and Text Size” tab
3. Set the options you want

Personally, I set it to minimum and do not experience any inconvenience, even at the equator. In the sun the display is a little faded, but the information is still visible.

What does the Apple Watch show when activated?

Apple Watch automatically activates when you raise your hand to look at the watch. By default, the watch face is displayed. But I like the latter to be displayed running application. For this:

1. Open the application Watch
2. Go to the “My Watch” tab
3. Select "General"
4. Select "Activate Screen" (bottom)
5. Select your desired action

Oh, by the way, when you are on the screen with a dial, then double tap The Digital Crown will open the last running application.

How to change the Apple Watch watch face

Unlike everyone else previous paragraphs, setting Apple watch face Watch happens on the watch itself. To change the watch face on Apple Watch, press the screen lightly until you feel vibration feedback (Forth Touch, like the iPhone 6s). A menu will open in front of you with a selection of possible watch faces. Choose the one you like and click “Customize”.

Swiping left and right will move you between watch face settings, and you can adjust them by turning the Digital Crown.

Most watch faces have space to display extensions from third-party apps. These settings are located on the last screen and can also be changed using the Digital Crown. To save your changes, press the Digital Crown and then tap the watch face.

In conclusion

Here's everything you need to start your Apple Watch for the first time. Now you can proceed to independently research the programs. Many of my favorite apps for iPhone already have versions for Apple Watch, so you will also have something to play with.

(3 ratings, average: 4,67 out of 5)

Apple Watch Series 3 – last generation smartwatches from the Cupertino tech giant. Unlike Series 2, they are equipped with a stand-alone LTE module that works through the built-in eSIM (not yet supported in Russia), thanks to which they can be used even without a smartphone. But it will still be required to activate the device.

How to turn on Apple Watch Series 2, 3?

To turn it on, press and hold the “long” (not round!) side button until the manufacturer’s logo appears on the display.

If after 10-15 seconds of holding the long side button the screen does not flash and the device does not turn on, make sure that it is sufficiently charged. Connect the “charger” and leave it for 30 minutes. After that, you can try to turn on the device again.

How to set up Apple Watch Series 2, 3?

For initial setup You will also need a smartphone updated to the latest iOS versions, with Bluetooth enabled and active connection to the Internet (via mobile network or Wi-Fi).

How to do initial setup

In order to initially set up your smartwatch, you will need an iPhone with Internet access. How to connect these two devices:

• Turn them on;
• Bring your watch to your iPhone. Wait a while until a message appears on the phone screen prompting you to use your smartphone to make settings. Click “Next” there. If it doesn't appear, check Bluetooth - it should be turned on. You can also open the corresponding application and click the “Create a pair” button;
• After this, a special animation will appear on the watch screen, and the smartphone will turn on the camera through which it will recognize it. Place the companion device's display in the center of the viewfinder as shown in the tips. If automatic recognition does not happen, click the “Create a pair manually” button. The wizard will demonstrate instructions for pairing devices;
• Choose which hand you plan to wear the watch on;
• Agree to all terms of use;
• Enter your Apple ID password.

How to connect Apple Watch 2, 3 to WiFi?

Upon initial activation, the smartwatch copies the settings profile from the connected smartphone. That is, if Wi-Fi, GPS, Siri, etc. are enabled on the iPhone, they are automatically activated on the companion device. Passwords wireless networks will also be transferred along with the rest of the data.

You can enable WiFi on Apple Watch 3, as well as disable it or configure other settings directly in the corresponding window of the initial setup wizard.

What else can you do?

In the Initial Setup Wizard you can also:

• Set a login password. It will be activated when this accessory is removed from the hand;
• Set up a branded payment service;
• Install applications from the AppStore.

During the initial setup process, various usage tips will be shown on the smartphone screen.

Key features of Apple Watch Series 2, 3

Activity analysis of Apple Watch Series 2, 3

Tracking software physical indicators called “Activity” and is pre-installed watchOS software, that is, it is ready to work immediately after initial setup.

Interesting

Instructions on how to enable or disable activity tracking are shown directly in the initial setup wizard on your smartphone. There are also hints in the application itself.

In the interface donut chart The following indicators are displayed:

• The number of calories burned during movement (the “Mobility” parameter);
• Total duration of movements (parameter “Exercises”);
• The number of hours in the current day in each of which you moved for at least 1 minute (the “Warm-up” parameter).

To view detailed information about each parameter you need to swipe across the screen with pie charts up.

The “Exercise” and “Warm-up” parameters are not configurable. “Mobility” can be changed with a strong tap on any screen - after this, a screen will open with settings for the number of calories that need to be burned to achieve the daily goal.

Reminders about the need to “walk” are configured in the control application on the smartphone, in the “My Watch” - “Activity” tab.

How to measure blood pressure on Apple Watch Series 2, 3?

No way. This model, like the previous ones, is not equipped with a built-in blood pressure monitor and therefore cannot measure blood pressure.

Heart rate measurement on Apple Watch 2, 3

To measure your pulse, you need to launch the “Pulse” program from the application menu. In addition, the device constantly analyzes heart rate during active mode“Workout”, and also 3 minutes after its completion.

When you first open the Pulse program, the application will offer to enable notifications about increased heart rate in the absence of physical activity. If necessary, this function can be activated.

Apple Watch Heart Rate Variability

To measure heart rate, photoplethysmography technology is used, i.e. The pulse is analyzed by the degree of light transmission of blood in the vessels under the skin.

As a result, the quality of heart rate measurement may vary depending on how the photocells adhere to the skin, skin color, the user's health status, and other factors. The exact value may differ by several beats per minute from the measured one, either up or down.

Sleep analysis in Apple Watch Series 2, 3

There are no built-in tools for monitoring the quality and phases of sleep in this companion device. Therefore, it is recommended to use a third party for tracking. software, which can be downloaded from the AppStore - such as Sleep++, AutoSleep, Sleep Better, Sleep Tracker, etc.

How to track sleep on Apple Watch 2, 3 using third-party software

The operating principle of various third-party software is approximately the same. Required:

1. Install the desired sleep tracker from the AppStore;
2. Open the sleep tracker and start tracking mode.

Smart alarm clock for Apple Watch Series 2, 3

To use the watch as smart alarm clock You will also need to install third-party software that supports this feature. For example, Sleep++ or similar ones from the above list.

How to use Apple Pay on Apple Watch 2, 3?

In order for the branded one to work payment service, you will need to set a passcode. This is described in the instructions for initial device setup. In addition, right in the same menu you can link the card with which you plan to pay for purchases.

To configure the service, if this item was skipped in the initial setup menu, you will need:

1. Open the Watch application on your smartphone;
2. Open the “My Watch” tab;
3. Open the “Wallet and Apple Pay»;
4. If you don't have a passcode set on your watch, the app will prompt you to set it right now. Do it;
5. Click "Add card";
6. Select a card from among those already linked - or enter the details of a new one;
7. Enter security code cards;
8. Click “Next” and wait for information from the issuing bank;
9. Click Next.

That's it, the branded payment service will work.

To pay in a store, you will need to quickly press the side button on the watch twice and then bring it face down to the terminal. When activated they will vibrate slightly.

Need to know

If the transaction size exceeds 1000 rubles, you will have to enter the PIN code of the linked card at the terminal to pay.

Unlock Mac with Apple Watch

The watch can only unlock those computers and Mac laptops who work for macOS High Sierra and support wireless connection via Bluetooth. In addition, all company devices must be associated with one account. To set up unlocking you need to do the following:

1. On a computer or laptop, open the “Settings” application, select “Protection and Security”, then “General”;
2. Check the box next to “Unlock Mac with Watch”;
3. Enter password account;
4. Confirm.

All. Now the computer will unlock automatically.

How to charge Apple Watch Series 2, 3?

To charge, you must use the included wireless charger. It is enough to connect it to the network and place the back of the watch on its active surface. The charger is equipped with special magnets that automatically align it.

You can also use AirPower wireless charging.

How to Charge Apple Watch Outside the Home

You can use more than just a household network for charging. The power cable can also connect to the ports Computer USB, laptop, external battery(“power bank”) or any similar charger.

How to update Apple Watch 2, 3?

Software updates (watchOS) are performed via a linked iPhone smartphone. Instructions:

1. Set the watch to charge. You cannot remove it from charging until the update is complete;
2. Make sure they are more than 50% charged;
3. Open the Watch application on your smartphone, in it - the “My Watch” tab;
4. Select “Basic”, then “Software Update”;
5. Download the update. If necessary, you will need to enter a password for your account;
6. The update will be installed automatically;
7. The update may take time to install. Wait for it to finish. The corresponding indicator will report this.

You can remove the watch from charging only after the update is complete.

Can Apple Watch be connected to Android?

No you can not. Apple Watch does not work with Android phones. Does not exist third party application, which would simulate the corresponding software for iOS.

However, the user community is looking for another way to connect these two devices. But on currently The answer to the question “Does Apple Watch work with Android” is no, it doesn’t.

Express guide to Apple Watch Series 2, 3

How to check Apple Watch 2, 3 for authenticity

First, make sure it's a Watch and not a smartwatch. iWatch"or something like that.

How to check Apple Watch upon purchase:

1. Swipe visual inspection. Make sure that the case is free of any connectors, including slots for SIM cards or memory cards, charging connectors, etc.;
2. Turn on your device. Make sure it actually turns on;
3. Try connecting to your smartphone. If during the initial setup the device prompted you to enter your account information, you can enter it. The main thing is that there is no “Activate Watch” screen.

How to turn off GPS on Apple Watch 3

GPS does not turn off. You can turn it off on your phone, then the number of geolocation requests will decrease slightly.

Apple Watch Series 2, 3 is not charging - what to do?

If your Apple Watch won't charge, you can try the following:

1. Make sure the power supply is plugged into an outlet and that there is current. Try a different outlet;
2. Make sure the wireless charger is in contact with the watch and the magnets are aligned. Try reconnecting. Try turning the charger over;
3. Make sure chargers (including wireless module, cable and power supply) – original and included in the delivery kit;
4. The charger must not have any shipping film on either side;
5. The charger and watch must be clean;
6. Try to force reboot your watch. Press and hold the round and side buttons for 10 seconds. After rebooting, put it on charge again;
7. Try a different cable, a different power supply, a different wireless charger.

If they still do not charge, take them to a service center.

How to reset Apple Watch to factory settings

The easiest way to reset is to remotely delete all personal data via iCloud:

1. On your computer, open icloud.com;
2. Log in to your account;
3. Select “Find iPhone”;
4. Select from available devices your watch;
5. Click "Erase" and then select "Next" until the process is completed;
6. Also click the “Delete” button (icon with a cross) next to the name of the watch.

Through the application it is a little more difficult. More details about this will be written later in this manual in Russian (in the section “How to break up a couple”).

In order to reset the watch (to perform the so-called “Apple Watch Restore”), the iPhone associated with it must be connected to the Internet via mobile communications or Wi-Fi.

How to charge Apple Watch without original charger

The third generation companion device (Apple Watch series 3) has limited support for the standard wireless charging Qi, so may be compatible with some chargers. Try placing the back of it against a Qi-enabled active charger for a few seconds. If charging works, this device can be used.

How to unpair Apple Watch 2, 3

Before you can sell your watch, you will need to remove your own credentials from it. How to unlink Apple Watch from Apple ID:

1. Open the control application on your phone;
2. Open the “My Watch” tab;
3. Open the “Information” menu (indicated by the i symbol in the circle next to the name of the watch);
4. Select “Break pair”;
5. If used tariff plan, click “Delete tariff”;
6. Enter your account password;
7. Confirm your desire to break up the couple.

Unlinking also resets to factory settings.

Notifications do not arrive on Apple Watch Series 2, 3

This may be due to the following:

• The smartphone to which the smartwatch is connected is currently in use. Then notifications are displayed on it;
• The watch has a screen lock or Do Not Disturb mode active. Unlock or disable this mode through Control Center;
• The watch is disconnected from the phone. This is indicated in the Control Center with a special icon. Turn on phone Wi-Fi and Bluetooth, and on the watch - first activate Airplane mode and then turn it off.

How to unlock Apple Watch 2, 3

To unlock your watch, tap the screen or briefly press any button, and then enter the passcode you set earlier.

How to change the strap on Apple Watch 2, 3

The watches use special straps with a proprietary fastening. Use a standard spring, common in analog devices, will not work. But to change the strap, it is enough to remove the old one and install a new one in its place until a characteristic click appears.

How to remove the strap from Apple Watch

1. Turn the clock face down;
2. Press the strap release button (located next to the strap);
3. While holding the release button, slide the strap to the side.

How to turn off Apple Watch

To turn off your watch, press and hold the side button until the “Off” slider appears, then slide it.

Hello! The article will be useful to those who have already decided to buy a watch from Apple or are still looking at the new product. Let's look at the answers to the most popular questions, of which quite a lot have accumulated: what are they, where and how to buy them, how much will they cost, do you need an iPhone to use them, what can they do for an absolutely ordinary average person? There are many mysteries - there are no answers yet. Let's try to fix this!

This post will be in question-answer format. Some of them were received by email from site readers, some I found on the Internet. In general, sit back and get ready to find out everything you wanted to know but were afraid to ask :)

Apple Preview Watch already here - let's go!

Basic definitions

What is this Apple Watch that everyone is talking about?

Apple Watch is essentially small computer, they can also be called " smart watch”, which naturally need to be worn on the hand. Possesses a huge amount functions, including displaying time and date, the ability to monitor health (steps taken, number of calories, pulse), synchronizing data with iPhone (contacts, SMS, notes, mail), making payments (not in our country:(), remote control remote control and much more.

By the way, sometimes they are called iWatch by mistake. This name is unofficial and fictitious.

So, is the Apple Watch the same iPhone - only small and to be worn on the hand?

In principle, you can say so, but the most important thing is that the watch is primarily an addition to the iPhone. They are designed to make using the phone even more convenient.

Apple Watch works under iOS option called WatchOS. This operating system is specially adapted (both in terms of power consumption and ergonomics) for wearable devices. She has unique system navigation through the menu, recognizes the degree of pressure on the screen, there is also a replacement dial, a heart rate sensor, an NFC sensor for Apple Pay (not relevant for Russia) and much more.

Do you need an iPhone to use Apple Watch?

Yes, you will need iPhone version 5 or higher current models. The operating system also has certain requirements - it must be iOS 8.2 or higher later version. If the phone version is older, then you will not be able to “pair” with the iPhone and take advantage of most of the functions.

Can I use my iPad or iPod with my Apple Watch?

Unfortunately no, you will not be able to pair your watch with an iPad or iPod of any generation. By at least this cannot be done in this moment.

When will it be possible to buy an Apple watch?

They will go on sale on April 24 in Australia, Canada, China, France, Germany, Hong Kong, Japan, Great Britain, and the USA. As can rightly be noted, Russia is not among these countries. So for those who want to own a new product on the first day of sales there are two ways:

• Visit one of these countries.
• Wait for the resellers (the price will probably be jacked up).

At the time of writing, there is no clear information about when the Apple Watch will go on official sale in the Russian Federation. There are several different data from many sources about the release date; most agree that official deliveries should be expected 2-3 months after the start of sales.

What is the price of Apple Watch in the USA and Russia?

At the moment, only prices in the USA and Europe are known for certain. The pricing itself depends on what version of the watch, its size and what strap is used.

Since this time the company from Cupertino has diversified the lineup, it makes no sense to list absolutely all configurations. You can always watch them. Let me just note that the most inexpensive version will cost $349. For more expensive lovers, the maximum price is $17,000.

If we translate into rubles, then we should expect the Apple Watch in Russia to cost from 22,000 to 900,000 (that’s not a typo!) rubles.

Update! In the end, this is what happened: prices for Apple watches in Russia start at 21,000 thousand rubles.

Will watches purchased in Europe or the USA work in Russia?

Of course. There are no restrictions. You can absolutely safely purchase an Apple Watch anywhere and use it anywhere in the world, including in the Russian Federation.

What's included in the package?

In addition to the clock itself, Apple package Watch includes:

• Strap.
• Magnetic charging cable.
• USB adapter (Apple Watch Series 2 only).
• User manual.

Modifications and types of Apple Watch

The watches come in three different collections based on case and display materials:

• Apple Watch Sport(7000 series silver aluminum with ion-x glass, back panel made of composite material).
• Apple Watch (316L Stainless Steel sapphire crystal, ceramic glass back panel).
• Apple Watch Edition(18 carat pink gold sapphire crystal, ceramic glass back).

For each edition, different variations with straps are possible.

Are there any differences between the models due to what they are made of?

No! All specifications are the same and they provide identical functionality. It doesn't matter if it's $359 or $17,000. The only difference is in the materials of manufacture.

Size and weight

For each modification, there are two display sizes - 38 mm and 42 mm. The remaining dimensions are as follows:

• 38.6 mm. Width 33.3 mm, height 10.5 mm.
• 42 mm. Width 35.9 mm, height 10 mm.

Weight varies depending on the material of the case and strap, the minimum is 25 g. The maximum (gold) is 69 g.

Is Russian available in the Apple Watch menu?

Unfortunately, at the moment there is no support for the Russian language in the watch. Although it is possible to quickly respond to messages specifically on the “great and mighty”.

Update! With coming new firmware, Everything has changed. Now declared full support Russian language. If your watch has old version OS, it makes sense to update as soon as possible. Let me remind you that software updates occur using (from the menu) a companion device (iPhone).

Is it waterproof?

The head of the company, Tim Cook, said that he regularly goes to the shower with his Apple Watch. However, at the same time he noted that he would not recommend diving or immersing them in water for a long time.

The watch is officially water resistant to the ipx7 standard. This means you can wear them to the gym and even take a shower. But you should refrain from diving 1 meter for more than 30 minutes.

What sensors does the Apple Watch have?

Each gadget, regardless of the collection, is equipped with the following sensors:

• Heart rate (to measure pulse).
• Accelerometer and gyroscope (counts the number of steps, and even which floor you climbed to).
• Ambient light sensor (to save battery - the screen turns off when necessary).

Screen

All models are equipped Retina display. The screen of the Sport collection (the most inexpensive) is covered with ion-x glass. Watch and Edition have a sapphire display finish. Although Apple has not confirmed this, most agree that the display is made according to OLED technology(allows you to get a deeper black color and reduce energy consumption).

Now about the physical dimensions:

• 38 mm. 340x372 pixels.
• 44 mm. 390x312 pixels.

What processor is installed in the Apple Watch?

The clock is controlled Apple processor C1. Accurate information there is no talk about it yet, but they say its performance is somewhere between the Apple A4 and A5 (iPhone 4 and iPhone 4S).

Wireless connections

We couldn’t do without them, which is quite logical: for a high-tech gadget, high technology!

• Bluetooth 4.0 connectivity low power consumption(LE) for discovery and pairing.
• Wi-Fi version 802.11 b/g/n 2.4 GHz for quick exchange data.
• NFC for Apple PAY.

Internal memory capacity in Apple Watch

Is 8 GB. Moreover, the entire memory is divided into parts and for each type of information it is available limited quantity places.

• 2 gigabytes for music.
• 75 megabytes for photos and pictures.
• The rest of the area is reserved for operating system Watch OS and applications (which you will install).

Battery life

Apple specifies that the battery will last an average of 18 hours. On official page, represented by more detailed information. So it's time Apple works Watch depending on conditions:

• 18 hours in mixed mode.
• 3 hours talk time.
• 6.5 hours of audio playback.
• If you use it exclusively as a watch, you can see the time within 48 hours.
• Power reserve - 72 hours.

• up to 80% - 1.5 hours.
• up to 100% - 2.5 hours.

How does charging occur?

The Apple Watch comes with a special magnetic cable. It's buckled on back gadget. So there are no ports present. Which is quite convenient and has a positive effect on water resistance.

Apple Watch and iPhone

Do I need special software to sync iPhone with Apple Watch?

No, you don't need to download anything additional. The synchronization application is already installed on iPhone (from version 5) and iOS from version 8.2.

How to create and unpair a watch and an iPhone?

Opening Apple app Watch on iPhone, select the “my watch” tab and click “start pairing”.

In order to disconnect devices there is special item in the application. When you press it, you will be asked if you want to do backup copy Apple data Watch? It will come in handy if you plan to use this particular iPhone with your watch in the future.

The distance at which the connection is not interrupted

The standard Bluetooth range is 9-15 meters. It's better not to go far :). However, if your Apple Watch and phone are connected to the same Wi-Fi networks, synchronization will be performed in any place where this network operates.

Is it possible to connect Apple Watch and another Bluetooth device to iPhone at the same time?

Apple has not yet provided official information about simultaneous work iPhone with Apple Watch and others Bluetooth devices(for example headphones). But most likely it will be possible.

Can I connect my Apple Watch to multiple iPhones?

To use it with another iPhone, you need to disconnect the connection to the one it is currently connected to. You will be prompted to make a backup copy of your data and then, when you return to the original phone, there will be no need to set everything up again!

If you forgot your iPhone at home, will the watch become useless?

No. Even if the Apple Watch doesn't have access to data, there are still plenty of features you can take advantage of:

• View time.
• Setting alarms and timers.
• Physical activity tracking - heart rate, pedometer (although you can’t track the route - there is no GPS receiver).
• View photos and playlists.
• Apple Pay.
• Various third party applications.

Does Apple Watch affect iPhone battery drain?

From what is known at the moment, the watch is used Bluetooth standard 4.0LE ( Low Energy). This means their use will have virtually no effect on the phone’s battery.

IN this review I didn't talk about controls, menus and the like. For two reasons:

1. It turned out to be quite big anyway.
2. It’s better to tell (and show) about these things by having full-fledged device on hands.