How to speed up the download of Windows 7 maximum. Reducing download timeout

Simple tips on how to speed up the boot of Windows 7

Try to start by putting things in order at startup.
When serious boot problems are eliminated or discarded, the biggest slowdown is the sheer number of unnecessary programs that start when the operating system starts up. Standard small but very important advice "Disable unnecessary programs from startup"

Of course, the automatic launch of many programs is very convenient and allows you to save your time a lot. However, if you listen to this simple advice and disable such programs, you can really greatly and noticeably speed up the system boot, but then of course you will have to spend time launching them. manually, but only if you really need them. You’ll say, well, why then change the awl for soap?

Often, programs whose purpose is completely incomprehensible to users go under the knife. In doing so, they can play an important role in keeping your system secure. For example, it is extremely important to check for updates to the Java Virtual Machine, Apple QuickTime, and Adobe Reader given the vulnerabilities that are regularly patched.

But in the absence of one, the system utility msconfig will do.
My approach is very simple.
The most important thing is the Drivers and all programs to protect your computer, they naturally need to be left. After all, everyone understands that if you disable the screen, keyboard or mouse driver, the devices simply will not work. In general, you need to keep records belonging to Microsoft and other hardware manufacturers such as (nVidia, Intel, etc.).

Firewalls and Antiviruses must protect the system from the very first second of startup, so you shouldn't disable them either.
We are looking for all the unknown on the Internet. If the purpose of one of the programs is not clear, you can quickly find out by searching the Internet by the name of the executable file. The next two points depend solely on your ability to analyze the search results and the list of preferred programs.

We do not touch anything incomprehensible. If the search did not help you in any way to determine the purpose of the program you were looking for, it is better to leave it alone and not touch it at all. However, you can quench your thirst for experimentation using my favorite method (below). At the same time, the risk of creating a problem for yourself will be much less than with a complete shutdown of programs.

Disable unnecessary. When the purpose of the program is absolutely clear, but you hardly use it, you need to remove it from startup. Let me emphasize that we are talking only about programs with which you can interact. Many startup applications do not have a graphical interface and are used, for example, to check for security updates to "parent" programs in the background. By disabling them, you create a potential security vulnerability for your system.

You already had an order in startup, and my approach did not open America for you? Then try my favorite method - scheduling startup times using the task scheduler. If you later export the customized scheduler tasks for your favorite programs, even after reinstalling the system, you can very quickly optimize startup.

You will see the immediate effect of accelerating the boot even with the naked eye the next time you start the system. Everything is quite simple here: there are fewer startup programs, which means that the system booted faster. In addition to the number, the speed gain also depends on the size of programs removed from immediate startup.
This tip applies to both hard drive (HDD) and solid state drive (SSD) owners.
Check out SuperFetch and ReadyBoot

ReadyBoot does not work on solid-state drives, but on hard drives it helps to speed up Windows startup by placing system boot files and applications that start with it in RAM. The debugged effect of putting things in order in startup (including the distribution over time) is connected precisely with the work of ReadyBoot and is not so noticeable at first glance.

One of the improvements to the SuperFetch service in Windows 7 is that the analysis and filling of the cache are not performed immediately, but some time after the system boots. Apparently, this was done in order not to interfere with us performing actions in the system immediately after its launch. Therefore, the SuperFetch service takes a certain amount of time to respond to the changes you made in startup programs.

You will see the effect of ReadyBoot only after a few reboots, but taking into account the above, it makes no sense to reboot the system immediately after logging in. Either let it stand for a while, or just work as usual for two to three days, rebooting as usual.

Defragment your disk - now and on schedule
If your system is installed on an SSD drive, any advice on defragmentation does not apply to it. But the issue of fragmentation is very relevant for owners of conventional hard drives, which are the slowest components in modern computers.
So, you have ReadyBoot running and you have already managed to reboot a couple of times after distributing autoload. It's time to defragment the boot files on your system drive!
defrag C: / B / U
It is curious that this parameter is not officially documented - it was suggested by my colleague on the forum, and later I found a mention in the developer's blog and supplemented my list of command line parameters. In fact, it is simply faster than performing a full defrag, which also processes the boot files.

Defragmentation of boot files gives an instant effect, and after a couple of reboots it will even intensify due to the ReadyBoot training. However, the effect will be temporary if defragmentation is not performed on schedule. By the way, in this case, the system performs defragmentation of the boot files separately, i.e. uses just that undocumented parameter, which was discussed above.

Mentioning the boot sector is a localization error. In the English system, this is simply called boot optimization, i.e. optimization of loading.
The effect of defragmenting boot files can negate a third-party defragmenter that places file fragments on disk in its own way.
For Windows Defragmenter to work effectively, three conditions must be met:
Task Scheduler service enabled.

Enabled ScheduledDefrag task in the scheduler.
At least 15% free disk space.
Without the first two conditions, scheduled defragmentation simply does not occur, and the third is necessary to complete a full defragmentation.

But this is not the end of our story - I have one more piece of advice! It does not make the system boot up faster, but it allows you to start working with it much faster. After all, isn't that why we're trying to reduce load times? 🙂
use sleep and hibernation modes!
No matter how hard you try to speed up Windows startup, its duration will always be several times longer than the time the system exits from hibernation, and even more so from sleep. I will not dwell on the intricacies of these modes, because OSZone has a great article on this topic.

I actively use both modes on my two systems - after a period of inactivity, they go to sleep, and instead of turning them off, I put them into hibernation. Restarting is required only when installing updates and some programs, so on average it happens every three to four days.
It is very easy to view the time from sleep and hibernation in the already familiar Diagnostics-Performance event log. Both modes are recorded in event ID 300.

Sleep and hibernation can help save energy on mobile systems, and while this is almost irrelevant on desktop systems, there is nothing stopping you from using these modes in them too. You can just try and see how convenient it is. At the same time, you can find out if you have any problems with them in the system, which sometimes happens (for example, peripheral devices refuse to "wake up"). As with booting, diagnostics can be performed using the Windows Performance Tools.

The problem often lies in the area of ​​drivers, but not always there is a more suitable driver for the device.
Whether or not you run into a problem depends in part on the origin of your computer. Obviously, netbooks and laptops sold with Windows 7 on board are the least affected. Especially when used without mice and other peripherals, since the manufacturer tests not only hardware, but also a set of drivers.

Desktop systems from OEM builders are also less likely to experience problems. If the pre-installed system is replaced by a more functional edition, the chances of a smooth driver combination becomes lower. Well, the most problematic to me seem to be "g-assemblies" on "self-assembly" 🙂

———————————————————————————
If you follow these fairly simple tips, you can get up and running with your computer much faster after turning it on or restarting.

Without a doubt Windows 7 is a much better operating system than previous versions Windows but that doesn't mean it is faster. Those who still use their old computer, due to the hardware requirements of the system, cannot get the same performance as in Windows XP. There are many more factors that can significantly slow down performance. In this article, we're going to show you some helpful ways to improve the speed and performance of Windows 7.

1. Disable unnecessary visual effects

• Right-click on "My Computer" in the Windows Start menu and select "Properties."
• Click on the "Advanced System Settings" button on the left panel.
• In the "Advanced" tab, click the "Settings" button in the "Performance" section. Select "Special:".
• Take a look at the list and uncheck the boxes for the effects you are not using. (Note: For best results, uncheck all boxes except the last four items.) Click OK.
• Reboot your computer

2. Increase download speed

With this little tweak, you can reduce boot time of your Windows 7 OS.

• Press Windows Key + R to launch the Run window.
• Type "msconfig" and press Enter. The system setup window will appear.
• In the “Boot” tab, you will see (on the right side) “Time out”. It is usually set to 30.
• If you are using only one operating system, then you can set the value to 0. But if you are using more than one, then set the value to 3.
• Check the box next to “No GUI Boot”.

• Click the "Advanced Options" button
• Check the “Number of Processor” box and select the number of processors in your computer.

• Now click the "OK" button.
• Click the “Apply” button and then “OK” again.

3. Disable Windows Aero Theme

Windows Aero Theme is a combination of lightweight translucent windows with powerful graphics capabilities in Windows Vista / 7. Although its performance has been significantly improved in Windows 7 compared to Vista, this effect still takes up a lot of RAM and places high demands on the graphics card. If you can live without Windows Aero Theme, then use the following tip and disable it.

• Right click on the desktop and select Personalization.
• Select one of the standard themes on the right side, for example “Windows 7 Basic”.

4. Remove unnecessary items from the startup menu

Some of the applications that you have installed are automatically added to startup without your knowledge. If your Windows takes a long time to start up, one of the reasons could be these applications. The best way to fix this is to remove unwanted programs from startup.

• Press Windows Key + R and type "msconfig" in the Run dialog box.
• Click on the "Startup" tab. Uncheck the boxes for apps you don't use. (Make sure you don't disable system services).

5. Use your USB flash drive as RAM

V Windows 7 there is a very useful feature that allows you to use a USB flash drive as external RAM.

Make sure you are using a freshly formatted USB drive before starting.

• Connect USB. Right click on the USB drive in My Computer and select Properties.
• In the "Ready Boost" section, check the "Use this device" box.
• Set the size of the disk space of your USB flash drive that you want to allocate to speed up the system.

6. Disable unnecessary system sounds

When they are active, the sound system can consume a lot of system resources and slow down your computer.

• Press Windows Key + R to open the Run dialog box. Type “mmsys.cpl” and press Enter.
• Click on the "Sound" tab. In the sound scheme, select “No sounds” from the drop-down list.

7. Disable the search indexing feature in Windows 7

Most users Windows 7 do not use the search in the system. But the search indexing service will still index and track files so that the files can be found quickly. This feature is only useful if you search your system frequently. It unknowingly eats up system resources, so we recommend disabling this component indexing function.

Right click on "My Computer" and select "Manage".

• Click the Services and Applications button in Computer Management.
• Click on “Services”.
• You will see a lot of services. Find “Windows Search” in this list.
• Right click on Windows Search and select Properties.
• the "Windows Search" properties window will open. In “Startup type” click on the dropdown menu and select “Disabled”.
• Click the "Apply" button, then "OK"

8. Disable Windows 7 Sidebar

Disabling Windows 7 Sidebar will certainly help you get a few seconds during startup. There are many useful utilities like RocketDock etc. to customize system startup.

• Right-click on the Sidebar and select Properties.
• In the properties of the window, uncheck "Launch sidebar on Windows startup"
• From now on, Windows Sidebar will not start along with the system.

9. Disable User Account Control (UAC) in Windows 7

The User Account Control (UAC) feature in Windows 7 is very annoying, although it is supposed to protect your computer from malware and virus activity. But if you use a computer every day, then this function will bring some inconvenience to you.

10. Defragment Disks

Defragmentation helps improve access times for each file by managing free space and organizing file locations on disks. It is recommended to run defragmentation very often, especially if you have a large amount of data, after deleting unnecessary files, cleaning the disk, etc.

• Go to "My Computer", right-click on the desired drive and select "Properties"
• In the dialog box that opens, open the "Service" tab
• In the Disk Defragmenter section, click the "Defragment" button
• Defragmentation will take some time, depending on the size of the partitions and data.

If you know any other methods on how to speed up Windows 7, share them in the comments.

Before a reasonable question how to make Windows 7 boot faster, it is worth every user of not only a low-power computer, but also a high-performance machine. The system itself is efficiently dissipating resources, but due to the gradual cluttering of the system, incorrect settings and other negative phenomena, the system starts to work slowly. We'll look at ways to get the most out of your computer.

How to make Windows 7 boot faster at startup?

BIOS settings (UEFI) and elimination of certain programs from autostart can help speed up the boot of your Windows 7 computer.

With the correct BIOS settings, you can save up to half the time for system startup. Let's change the main parameters:

1. We reboot the computer and during startup press Del, F2 or another key (if the button is different, look at the documentation for the computer).
2. Go to the "Boot" section in older versions - "Boot Priority".
3. In the "Fast boot" section, set the "Enable" position.
4. In the column "1st Boot Priority" we install our HDD or SSD.

After the changes are made, the system will stop looking for the presence of a disc in the DVD drive, flash drives and other USB devices. During startup, the USB keyboard will not work, it will be more difficult to start in Safe Mode in the future.

The next important procedure is to eliminate unnecessary applications from autorun:

1. After starting the system, press Win + R and enter msconfig.
2. We remove the selection from the secondary programs. Important - they will remain available, but they will need to be started manually.

Working with a disc

You should already notice a significant increase in speed, but the procedure should be continued, since increasing the performance of the hard disk will also help speed up the boot of the Windows 7 laptop. The HDD is the only mechanical element in a computer (other than a floppy drive), which is also the slowest, and often slows down a PC. The best option is to install an SSD, but if this is not possible, you can use your HDD with better efficiency.

We remove temporary files:

1. Download CCleaner from the office. site.
2. After installation and launch, on the "Cleaner" tab, click "Run Cleaner".

1. The program will automatically delete unused and temporary files.

The second stage of acceleration is the removal of extraneous programs:

1. In the same CCleaner program, go to the "Tools" section.
2. We remove unknown, not very useful, outdated programs and games.

Stage 3 - Disk Defragmenter:

1. Go to "My Computer", RMB on the system partition of the disk, then select "Properties".

1. Click on the "Service" tab.
2. Press the button "Defragment".

After completing the procedure with the system disk, it is better to do the same for the other partitions.

How to make Windows 7 64 bit boot faster by eliminating visual effects

By the way, the presence and type of antivirus greatly affects the download speed, we recommend replacing it with a less resource-intensive one or even using antivirus scanners. They will not provide real-time protection, but if necessary, it is easy to run a system scan and remove viruses, one of the best options is Dr. Web.

The classic system theme requires a lot less resources than the various animated versions. If you are ready to put up with a simple interface, proceed to changing the parameters.

Disabling Effects:

1. Click on Start, RMB on "Computer" and select "Properties".

1. We select "Additional system parameters".

1. In the "Performance" section, click on "Options ...".

1. Set the selection to "Provide Best Performance".

1. Apply the changes.

Reducing download timeout

This method will also help speed up the boot time of Windows 7, the gain will not be as noticeable, but it will still be noticeable.

Reducing the response time:

1. Press Win + R and enter msconfig.
2. In the "Timeout" column, set the value to 3 (if one system is installed).
3. Check the box next to "No GUI".

1. Click "Apply" and close the window.

Additional Methods to Boot Up Windows 7 Ultimate

There are a few more useful ways:

• virus removal. One antivirus is not enough to detect all threats, we recommend using several, for example, Kaspersky, Dr. Web, Malwarebytes Antimalware;
• work with iron. If you just have little RAM or low storage capacity, it is better to simply expand these indicators. With regard to the processor, overclocking can be used, but this procedure accelerates the wear of the hardware;
• dust cleaning. Due to dirt, the computer overheats and starts to work slowly. You can clean it yourself or contact a service center. Sometimes overheating occurs due to a weak cooling system, it may be advisable to install a more powerful cooler;
• setting priorities for work. In the "Task Manager" (Alt + Ctrl + Del) in the "Processes" tab, you can set the priority of the task. We find the required program, RMB on the process, direct the courses to “Priority” and set the “Realnoe Vremya”.

With the help of these methods, the computer will work much faster, and it will become more pleasant to use it.

If you still have questions on the topic "Accelerated boot Windows 7", you can ask them in the comment

if (function_exists ("the_ratings")) (the_ratings ();)?>

Every user of a personal computer or laptop is interested in ensuring that the performance of their "electronic assistants" is as high as possible. But how to make Windows 7 boot faster? Someone achieves this by buying modern components from leading companies with excellent technical parameters that cost a lot of money. Someone likes to engage in overlocking, that is, overclocking the parameters of computer components to the maximum possible values. This, by the way, can also cost a fairly large material investment. Indeed, with incorrect overlocking, the overclocked component can simply fail. I offer an absolutely free and safe way, albeit slightly, but still increase the boot speed of Windows 7. This is available to every user with administrator rights.

Technological progress has jumped so far that today it is already a rarity to meet a computer with a single-core processor. Currently, the majority of users have 2- and 4-core processors installed. And some can afford to use 8 or even 12-core processors. Why did I start talking specifically about the number of cores, actual and virtual (or threads)? The fact is that only one processor core is used to boot the system. And on the Internet there is still an opinion that if you use all the cores when loading, the speed will increase. I'll keep the intrigue and start by opening the system utility to help you configure the system boot to your liking. To do this, go to the "Start" menu (or "Start") and in the line "Find programs and files" enter the following command without quotes " msconfig».


A shortcut that launches the utility will also appear on the top. Click on it with the left mouse button.

The System Configuration window will open. We are interested in the "Loading" tab - open it.


Actually, it is here that the basic configuration of the Windows 7 system boot is performed. First, let's go to the "Additional parameters".


A small window will open with additional boot options. If you check the box next to the "Number of processors" item, you can manually specify how many cores will be used at boot. You can set the maximum number of cores. For example, I have four of them. But, returning to the opinion I wrote about above, I can tell you with confidence that this is just a myth. For the sake of interest, I even did a small experiment - I did several system bootings with one kernel, and after that - with four. The conclusion turned out to be absolutely unambiguous - on Windows 7 boot speed the number of cores has practically no effect. In my case, the speed gain was only 2-3%. And then it may turn out to be just an error. After all, for more accurate results you need at least a hundred downloads. But I didn't scoff at myself and didn't bother with the technique. But if you still decide to leave the maximum number of cores for reliability, nothing bad will happen. Click the "OK" button.

Now open the Startup menu, where you can enable or disable the download of some applications. Disabling the download of programs you do not need can significantly reduce Windows 7 boot time... Indeed, when the system boots, a lot of resources are spent on the automatic launch of the applications you have installed. To disable it, you just need to uncheck the box in front of the application. Click the Apply button to apply the settings.


On the Windows 7 boot speed also affects the number of enabled services, which you can find in the "Services" tab. Here, I strongly recommend that you familiarize yourself in detail with what it is responsible for before disabling a particular service. In order not to disable system services by mistake, check the box "Do not display Microsoft services." In this case, all system services will not be displayed, only the services of the programs and drivers you have installed will remain. I do not recommend disabling more than one service at a time, so that in case of critical errors you know exactly which service caused them. Click the Apply button and then the OK button to save the settings.


A small window will immediately appear with a message that for the new parameters to take effect, a system restart is required, for which I recommend clicking the "Restart" button.

The computer will restart. And already right when the system boots, pay attention to how quickly it will pass. This is a small

Tired of Windows 7,8,10 loading slowly? YES, the more time the operating system is installed, the more this topic begins to torment. Computers are becoming more powerful and more efficient, but at the same time, the demands of programs that are developed for new equipment are growing. For example, Windows XP boots an order of magnitude faster than Windows 7/10 on the same hardware.

So now, give up new features for the sake of fast loading of the operating system? No, fortunately there are tricky and not very tricks that will help us in solving this problem. In this article, you will learn how to programmatically reduce Windows boot time to 20 seconds or less.

Step one, services and processes

In Windows OS, unnecessary services are often launched that slow down the loading and operation of the system. Support for a variety of hardware is also provided, so the services to ensure that it runs correctly run with the system. Of course, if the system considers that there is no need for the service (since there is simply no corresponding device in the computer), then it turns off. But it still takes time to start, check and stop the service.

We launch the program "System Configuration", for this we press "Win + R", write in the window: msconfig and press Enter. To disable temporarily unnecessary services, go to the tab of the same name:

But you need to understand which services can be turned off, and which must be left working. For most services, it is easy to find information on the Internet, so I will not dwell on this in detail. I will only say: there is no need to rush and turn off everything, this can sadly affect the operation of the operating system.

Using the same logic, disable the programs loaded at system startup on the next "Startup" tab. More details are provided in a separate article. You will need to restart your computer to apply the new startup parameters.

Step two, the registry

There is a weak point in Windows - the registry. It just so happened since ancient times that most of the vital parameters of Windows are stored in a hierarchical database. The speed with which the OS finds the necessary entries in the registry directly affects both the boot speed and the operation of the Windows OS as a whole.

It is not uncommon for program uninstallers to work ineffectively, leaving in the registry entries about their presence and work (parameters, registered libraries, binding to certain file extensions, etc.). Such records can be considered garbage cluttering the database. And it is necessary to get rid of this garbage, for which it is worth using utilities such as, for example, Reg Organizer, CCleaner, Ashampoo WinOptimizer and others.

Launch CCleaner, go to the "Registry" section, click "Search for problems", and at the end - "Fix selected":

During such cleaning, and just while Windows is running, the registry is constantly fragmented. This means that you will need to DEFrag the registry. This can be done using the Defraggler program from the same developer. However, I will make an important note that in some cases "cleaning" the registry can affect important parameters. Therefore, it is imperative in advance, and in case of problems in the operation of Windows, you can immediately recover to the previous state.

Step three, main

Now you can start deeply optimizing the boot process of the system and programs. During the execution of applications, many side effects can occur, such as long loading of additional libraries and subroutines, prediction of conditional branches, cache misses, and so on. Analyzing this data is called profiling.

Since the OS in question was created by Microsoft, we will use a profiler created by the same company - Windows Performance Toolkit. More recently, this tool has been included in the Windows SDK. A web installer can be downloaded from the Microsoft website.

It is not necessary to install all the included components, you can only do with the Windows Performance Toolkit

This tool allows you to trace the operating system load from the very beginning. We need the executable file "xbootmgr.exe", which is located in the folder where you deigned to install the Windows Perfomance Toolkit, by default it is located in the directory "C: \ Program Files \ Microsoft Windows Performance Toolkit \".

Watch the video or continue reading the article:

To call the utility, start xbootmgr.exe with a parameter, for example, the "-help" parameter will display a list of all possible functions. To do this, press the "Win + R" buttons or go to the "Start -> Run" menu, and enter the command into the window:

xbootmgr –help

It is not necessary to add the path to the file, if it is already started:

For fun, if you want to see how your system behaves at startup at the moment, then run the command:

xbootmgr -trace boot

It will restart the computer and collect data during startup. The result of her work can be seen in the file boot_BASE + CSWITCH_1.etl which xbootmgr will save in its own folder or in the "C: \ Users \ your_name" folder. This file contains all the information about the behavior of programs at system startup, you can see a lot of interesting things. To do this, double-click on the file to open the Analyzer:

If you are interested, study the information, there is everything in the smallest details about the boot process: how many seconds it took to start each process, how computer resources were used, etc.

Now let's get down to business - let's start the process of automatic analysis and acceleration of Windows loading. Run the command:

xbootmgr -trace boot –prepsystem

During optimization, by default, 6 reboots will be performed and 6 files with information about the behavior of programs at each reboot will be saved in the same directory. This whole process is quite lengthy, but does not require user participation. You can successfully have lunch while the program is running. And don't forget to check first that you have a couple of gigabytes of free space on your "C:" drive!

After reboots, messages will appear in a white window, for example "Delaying for boot trace 1 of 6" with a countdown:

You don't have to try to work with a laptop, just wait. More messages will appear. At the second stage, the “Preparing system” window hung for about 30 minutes, while the processor was not loaded with anything, but then a reboot happened and the rest of the stages went quickly. In fact, the whole process can take an hour.

What does Xbootmgr do? It does not disable unnecessary services and processes, as it might seem. Xbootmgr optimizes booting so that at any given time, the resources of the computer are used to the maximum. That is, so that there is no such thing when the processor is loaded at 100%, and the hard disk is resting, or vice versa. It also happens. After the last reboot, nothing needs to be done, Windows will boot, and even work, faster.

Step four, dangerous

In the seven, as well as in XP (although not everyone guesses about this), there is support for multi-core processors. It is not clear only why the system itself is not always able to use all available resources when it starts up, but starts using them only when it has already fully loaded and the user has started to work.

So we need to help her use the available resources in the system startup parameters. To do this, you need to dig into the configuration. With the key combination "Win +" R "open the" Run "window and write the command msconfig, click" OK ". In the appeared system configuration window, select the "Download" tab

Selecting "Additional parameters"

In the window that appears, set the parameters "Number of processors" and "Maximum memory" to the maximum. Now attention! We close and reopen the program, see that the value of "Maximum memory" is not reset to "0". If so, then remove the check mark from here, otherwise the system may won't start at all... Reboot, you're done.

Note: If you decide to add RAM or replace the processor with another (with more cores), then the above parameters will need to be changed. Otherwise, the system simply won't use additional memory and / or additional processor cores.

Windows 7, like all operating systems, has its drawbacks. Because of them, after a short period of time, the computer starts to lag and boot up for a long time. It should be borne in mind that if the computer is in an information network, then it is possible that programs are installed on it to protect information on the computer. For example, others can be used or implemented. To increase the download speed, you need to do the following:

• Press the keyboard shortcut Windows Key + R
• msconfig and press Enter
• In the new window, click the tab Boot and the meaning Time out put 3.
• Also, if you do not use more than one operating system, you can check the box No GUI Boot
• Then in the button optional / advanced options / numproc = check the box next to Number of processors, set the maximum allowed value.

Picture 1

Drawing - 2

Improving and speeding up performance

You can first disable any graphical add-ons for the operating system. In total, the load on the system will drop by 5%, which will increase productivity by 5% !. It should be noted that the appearance may seem old and boring, but we squeeze the maximum out of performance, so there is no place for cunning and beauty here. To implement such a task, you need:

• Press the keyboard shortcut Windows Key + R
• In the window that appeared, enter msconfig and press Enter
• In the new window, click the tab Service and find the line in the list System properties
• As soon as you select a line and it will be highlighted, press the button to run
• In the new window, click on the contribution Additionally
• Then in the selected item under the line Performance ... - press the button Parameters
• For maximum effect, select the item Provide the best performance well, or an item that is suitable in the sense of this.

Figure - 3

Figure - 4

Figure - 5

To view and remove programs from auto launch, look at the picture and you will understand for yourself.