There are several ways to get rid of advertising on the Tricolor info channel and turn on your favorite channel when starting up the equipment. All you have to do is spend simple manipulations with remote control.
Users often encounter the problem of unnecessary TV channels appearing. These could be the following channels:
- Duplicated as a result of software updates;
- Changing the channel's broadcast frequency, which led to the absence of broadcasting;
- Family members are not interested in watching programs;
- Reproducible in poor quality channels due to equipment changes.
To enjoy watching your favorite channels and not encounter advertising information channels, you need to delete or encode them.
How to delete channels - instructions
When the option to create favorite lists appeared, the ability to change classic lists disappeared. But it is possible to remove it if Stingray software is installed on the equipment. It is characterized by the presence of a manual search.
The channel removal procedure consists of the following steps:
The editing operation takes into account the fact that deleting the Manual Search list will result in the disappearance of all channels. Therefore, as new lists appear, it is necessary to move this list down.
After performing these steps, when you turn on the receiver and TV, the first channel from your list will be displayed. But all preset lists will disappear from the menu. There will also be question marks next to the TV channels in your list (don’t pay attention). The procedure is suitable for receivers of the GS 8306, B210, B531 and other modern models.
How to remove duplicate channels
You can remove duplicates by organizing channels:
Some receiver models (GS 8300, 8302, 8304) require confirmation of the delete operation by entering the code “0000”.
New clients who connect to Tricolor broadcasting can get rid of unnecessary channels by blocking. Execution scheme:
- Go to the main Menu and select “Channels”;
- Open the “Organization of channels” section (if required to gain access, enter the code “0000”);
- Moving through the list of channels, press the yellow button on an unnecessary position;
- To exit, click “Exit” and save the changes.
By placing a blocked TV channel at the bottom of the entire list, the user will not notice its presence when switching.
How to restore a deleted channel by mistake
A full return to previously broadcast channels is possible by resetting the settings and then standard search. A blocked channel can be returned to display by removing the block and confirming the operation by entering the code “0000” (when moving through the list, press the yellow button on the blocked channel).
Modern providers offer great amount TV channels, most of which are never watched and only prevent the viewer from navigating through the playlist. Next we will tell you how to delete a channel on a TV from Samsung or another manufacturer.
The sequence of actions required to remove unnecessary programs on a Samsung TV depends on the series and model of the device. These characteristics are indicated as a combination of numbers and letters on the back of the TB device or in the complete operating instructions for the device.
The series is designated Latin letter- the symbol is located in the name of the device after the prefix “UE” and the screen diagonal: for example, the device UE49MU6100U belongs to the “M” series. Having decided on the TV series, the user can begin editing the program playlist.
Series M, Q, LS
To delete channels on your TV Samsung series M, Q or LS the user will need:
- Open the device settings menu using the “Home” key located on the remote control.
- Go to system partition“Live” and open a tab with a playlist of television programs.
- Select the Change Channels tool using the Right arrow key.
- Mark the TV channels that need to be erased from the device’s memory - a check mark should appear to the left of the channel name.
- Press the “Delete” softkey and confirm your choice.
To complete the settings and exit the menu, press the “Return” button.
K-series
To remove unnecessary channels on a Samsung K-series TV, you need to:
- Go to the “Live TB” section.
- Open "Playlist".
- Mark unnecessary TV channels with a checkmark (Edit tool).
- Click on the screen button of blue color"Delete".
J-series
The algorithm for deleting channels on TV J-series is as follows:
- Go to “Settings” of the television device. Depending on the model number, you will need to press the “Menu” or “123” key on the remote control.
- Open the “Broadcast” section and go to “Playlist Changes”.
- Removing “extra” TV channels using the “Remove” button.
Afterwards you will need to press the “Return” key.
H-series
Instructions for deleting TV channels on Samsung N-series devices are presented below:
- Launching the settings menu using the “Menu” or “Keypad” key located on the remote control.
- Go to the “Broadcast” system subsection.
- Addition special checkmarks next to the names of the channels that need to be erased from the playlist.
- Selecting the “Delete” tool and confirming the operation.
Complete the setting using the “Return” key.
F-series
Deleting TV channels on F-series devices is carried out in the same way as on H-series devices. To log in, you must press the button located on the remote control. remote control“More” key.
E-series
To erase a TV channel from the memory of an E series device, the user must:
- Press the “ Smart Hub” and select “Channels” from the menu that appears.
- Mark unnecessary programs tick and open context menu“Tools” using the button with the corresponding name located on the remote control.
- Click on “Delete” and confirm the operation.
How to delete a TV channel on an LG TV
There is no function for deleting TV programs on LG devices - the user can only hide or move unnecessary programs to the end of the playlist.
To configure you will need:
- Press the “Settings” button located on the remote control.
- Open Playlist Editor.
- Highlight the “extra” program in color, click “OK” and move the TV channel to Right place playlist.
If desired, the user can always return standard settings channel order.
How to restore deleted TV channels
To return deleted programs, the owner of a Samsung TV will need to run the “Auto-Tune” playlist:
- Open system settings and select “TB” as the signal source
Digital TV appeared in our country several years ago. Since then it has been a frequently used channel connection option. And this is justified. After all, using digital TV, you don’t need to tune channels several times; one is enough. Also, you don’t have to adjust the antenna or re-tune the TV every time. In addition, there is no interference in the form of stripes or snow. Of course, if there is a breakdown on the tower, then there will be no signal and you will not be able to watch your favorite program.
This television format is DTV is most popular among users. To connect to free channels There is no need to call a specialist, you can do it yourself. The main thing is that the TV supports DVB-C tuner.
TVs Samsung brands have such tuners. Moreover, a similar setting can be made on both old models and new ones. This is exactly what we will talk about in the article.
How to set up digital channels on a Samsung TV
High quality television has long been part of our lives. Almost every house and apartment has new system TV, and some brands of TVs have (for example, Samsung).
Wherein smart technology requires a smart user for itself. Since for setting digital television some skills will be needed. There is nothing complicated in setting up television, but you still need to be very careful and know how to connect the TV to the TV. Many Samsung TV users often ask questions about how to set up television on a Korean TV.
How to auto-tune broadcast on Samsung
Set up digital television You can do it yourself or use the services of a telemaster. Setup is carried out immediately after the first connection. On Samsung TVs, the setup steps are similar. Such actions will not take much time. Even if you have never set up a television before, it will take you no more than 10 minutes. If you do everything correctly, you will be able to enjoy watching channels in good quality.
Configuration can occur automatically or manually. Everything will depend on what year your TV is made. Newer models have a special tuner that helps you quickly tune in to your TV. You just need to connect the antenna to the TV. If you have a Samsung TV with new feature Smart TV, then you can do auto-tuning. For this you need to do the following:
- Go to the Samsung menu and select “Broadcast”.
- A window will open, in which you need to select “Auto Configuration”.
- Click on the “Start” button.
- Now select the “Full” search mode and start the scanning process.
- This concludes the television setup. Now all you have to do is wait for the Samsung TV to search on its own available channels and store them in memory.
It happens that channels disappear. In this case you will have to configure special modules, which will become available in the TV menu. After setting all the points, you need to check the quality transmitted signal. If the channel is not activated, you need to go through all the setup steps again.
How to set up Samsung manually
Manual method Suitable for older Samsung models. To do this you need to do the following:
- Select the “Menu” button on the control panel.
- Now you need to click “Channel”, select “Antenna” and change it to “Cable”.
- The Country submenu will be available. Here you will need to enter a password, PIN code, whatever you want to call it. There will be one for each TV. For example, the code is four zeros. Now you need to set your country of residence. Select “Russia” from the list; if not, then you need to select others or “Eastern Europe”.
- Now you need to go to the “Cable parameters” section. It is usually located in the main menu. If it is not there, then you need to look in the auto settings. In some Samsung models, the developers decided to do just that.
- After we managed to find required section, you need to open it and insert the parameters: start - 298000 KHz, end - 362000 KHz. All other parameters are already there.
- Now you need to open auto settings. If you use exclusively digital TV, then you must select this item. You can also install analog channels or digital TV plus analogue. Then click “Next”.
- Now you need to open the search mode and enter “Network”. Click on the “Search” button. We wait a few minutes. This is the time for the search and setup to automatically end necessary channels. Then click “Ok”.
After the system performs a search, automatic mode All channels that the cable TV managed to find will be saved. But, only those that you have chosen will be shown.
How to remove channels on a Samsung TV
If you don't need any channel, it can be removed. To do this you need to do simple steps:
After you confirm the actions, the channels will be removed from the list.
If you have new model Samsung TV, that is, it costs Smart system T.V., then channels are deleted as follows:
- You need to find the button on Smart remote control Hub. This means the system hub.
- You need to click on it. A form will open with the channels listed.
- There is an editing section at the top right. All steps to delete channels will be described there. All you have to do is complete them.
Cable TV is new stage all over television. Now you can watch shows and movies in very good quality. We tried to tell you in detail about setting up digital TV on a Samsung TV. The setting will differ depending on what model of Samsung TV you have. With the new model, you can find and set up TV faster and automatically. On older models you will have to do the settings manually. Every user can set up TV on a Samsung TV. You can also edit channels on your TV. You can delete channels that are not interesting to you.
If you used auto search when setting up digital TV, like I did, you could catch more channels than you need. Usually, duplicate channels are caught. In this article I will tell you why this happens and how to deal with it. And also about manual search , and what to do if you found the second multiplex, but did not find the first and vice versa)
Where do duplicate digital TV channels come from?
So, first, let's figure out where these duplicates come from. And I’ll show you right away with an example to make it clearer. We watch digital TV and find ourselves there.
Let's say you live in Rognedino. We select the first multiplex, we see that there are several towers next to us. The first is located in Snopot and transmits a signal on the frequency of channel 30, 546 MHz.
The second, in Roslovl, transmits on the frequency of channel 51, 714 MHz. And yes, its signal reaches Rognedino, especially if you have.
There are also towers in Dubrovka and Zhukovka, but they also transmit on channel 30, so we don’t take them into account. What do we get as a result?
When we start the auto search, the set-top box will first find 10 channels of the first multiplex at a frequency of 546 MHz, and then the same 10 channels, but at a frequency of 714 MHz!
And after the work is completed, you will have twenty channels - two for each real channel. If you live at the junction of three regions, you can catch not even doubles, but tribbles.
What to do? There are two options, both are generally simple, but I still recommend the second one.
How to remove duplicates - option one
Delete extra channels. If there are not many duplicates, then we find the “Editing TV channels” item in the set-top box menu; for me this is the second tab.
We are looking for the “Edit channels” item in the set-top box menu
We go in, press the “yellow button” in my case, the set-top box will ask how many channels we want to delete, one or all. We select one and mark all unnecessary channels for deletion using the yellow button:
After that, click OK and after a couple of seconds the duplicates are killed.
Option two - also known as fine manual tuning
Don't be scared by the title, there's nothing complicated here. This is not to build rockets) This option the better, that you can leave channels that will run more stably. That's why I would recommend it.
So, to begin with, we kill everything that the set-top box caught with auto-search.
This is described in previous method, just choose to delete not just one channel, but all of them. After that, go to the “Manual search” menu item, for me this is the first tab and the very bottom line:
Here we manually set the frequency at which we want to catch our channels, or more precisely, at which they are transmitted in your region. We take the frequency from the official website of the project, in our example I would enter 546 and then 714 MHz. But in Bryansk the transmission of the first multiplex is on 618 MHz. If nothing is caught, we try to change the range; for me it works at 8 MHz. (this is the line immediately below the frequency)
After you set the frequency, the set-top box will show you the strength and intensity of the signal.
Choose one of the frequencies at which the signal is higher!
Then, on the same card that gives you the second multiplex, you also do a manual search. In my example, this is Roslavl.
Click on the tower and look at the frequencies at which the signal is transmitted. Important: If you just click on the tower, it will show the frequency of the first multiplex. To view both frequencies, click on “More details”, and on new page we see both frequencies:
On the “Details” page you can see all the frequencies on which the tower broadcasts
Actually, that's all. This manual search will give you all the channels in a single version.
Why is the first multiplex usually duplicated?
By the way, the most attentive reader now understands why the first multiplex is usually “duplicated”. Because the second one has not yet been launched everywhere, and if it’s running at all, that’s already cool. But the first one broadcasts from every iron from every tower.
Modern digital television High Quality has entered our lives - now almost every home has the latest TVs, many of which are equipped. However, smart technology requires certain skills in handling: it can be difficult to understand its settings. Users often ask the question: how to set up channels on a Samsung TV - the most popular brand of the Korean concern.
Digital channels can be set up independently or by a technician from the service center upon first connection. On TVs Samsung various models, such actions are performed in a similar way and do not take much time: even inexperienced user will spend no more than 10 minutes on this. Correct setting channels on the TV allows you to watch images with excellent quality.
You can set up your Samsung TV automatically or in manual mode- it depends on what generation of TV you have in your home. On modern models broadcasting is organized using a special tuner; it easily connects to the antenna socket and helps set up digital television (read more about). So, devices equipped with Smart TV function, are capable of auto-tuning. To do this, follow these step-by-step steps:
- select “broadcast” in the menu;
- Click on “auto-tuning” twice in the windows that open;
- After pressing the start button, select the search mode - full and start the scanning mode.
At this stage, the digital TV setup can be considered complete - now the TV will independently search for available channels and save them in memory.
Attention! If you have lost channels, then you need to adjust the frequencies using a special one, which is activated in the TV menu.
After completing all digital television setup steps, visually check the quality of the transmitted signal. If for some reason the TV channel is not activated, go through all the steps again.
Manual channel tuning algorithm
How to set up digital TV on older models? To carry out the operation manually, press the Menu button on the remote control - then you need to configure it, strictly observing the order of all instructions.
After mandatory confirmation of actions, the channels will be deleted.
On smart TV, deletion is carried out in this way: on the remote control, find the key labeled Smart Hub, which means the system hub, press it, and a list of channels will appear on the screen. Find the editing section at the top right and follow all the prompts.
We tried to tell you in great detail how to set up digital channels on various TVs Samsung brand. If Image quality is mediocre- check that the cable from the antenna is connected correctly or is intact, this will help. You can also try. For clarity, here is a video on how to set up digital TV:
