In some cases, a PC user may need to disable a particular user account. Please note that disabling an account is just a deactivation, not an account. Today I will show you how to do it correctly.
First way
First of all, we need to get into the control panel. To do this, click on the “Start” button and select the item of the same name.
The second option is to press the WIN+R keys on your keyboard, a window will appear in which you need to write the word control and click OK.
The control panel is running. Here we find the “Administration” item and click on it.
In the new window we see several various points, but we are only interested in one - “Computer Management”. Let's go into it.
In the “Computer Management” window, click “ Local users and groups", then - "Users" and select the user by double-clicking on him with the left mouse button.
The user properties window will open. To disable an account, check the box next to “Deactivate account” and click OK.
Second way
The second method allows you to disable your account using command line. To do this you need to open . Click the “Start” button, and in the “Search programs and files” line, write the word cmd. A command prompt shortcut will appear at the top of the window. Click on it right click mouse and select "Run as administrator".
The command line is running. Now you need to add the command net user Username /Active:no, where as username you specify the account name, for example, net user Administrator /Active:no. After this, press the Enter key.
Be careful. If you disable multiple accounts, you may not be able to access your account if you accidentally disable it.
UAC is an element of Microsoft operating systems that appeared in the failed Vista. It asks the user for confirmation to perform actions on the computer that require administrative privileges. This is done to prevent unauthorized changes to system parameters. If you are sure that you will not harm the computer through your own actions, and it is protected antivirus program, below shows how to disable UAC in Windows 10.
Such windows pop up due to time changes, startup installation files, making changes to the registry, start settings and taskbar, as well as when configuring Windows 10 through Settings and Control Panel.
In addition to protecting your computer from a significant number of malicious and virus programs, UAC warns the user when he tries to change important settings OS. Thanks to the pop-up warning window, the user begins to take greater responsibility for making changes to the top ten.
A
It's no secret that User Account Control is enabled by default. The protection level is at 3 out of four possible positions.
- “Always notify the user about attempts to install/uninstall an application or make adjustments to system registry by any means." Option provides maximum safety computer and will not allow any programs or scripts to perform any action requiring administrative privileges without your knowledge. Non-administrators will have to continually enter their password to confirm actions.
- “Alert when applications try to make changes to your computer without obscuring the desktop.” The default setting allows you to control only the operation of applications, but not user actions.
- The same as the previous option, but with shading of the desktop.
- “Never notify” - UAC is disabled and does not display any warnings.
Now that we’ve figured out the mechanism of operation and purpose of the User Account Control tool, let’s look at how to disable UAC in Windows 10.
Disabling via GUI
The easiest for beginners and, consequently, popular way The deactivation tool is a Control Panel applet called "Accounts".
- Go to the “Control Panel” using the WinX menu.
- We go to the point responsible for setting up accounts (it is located one of the last).
- Click on the link “Change User Account Control Settings”.
The action will require the user to have administrator privileges.
More in a simple way to open this window is to execute the command in search bar or the “Run” window (to call it, use the Win+R button combination).
A window that opens with a vertical slider with four positions allows you to manually change UAC settings. Moving the slider is accompanied by the appearance of an explanation for it. current state which were described above.
To disable UAC, move the slider to the bottom position, click “OK” and confirm the action that requires changes to be made Windows registry 10.
Having decided to get rid of annoying messages that regularly pop up, you should be extremely careful, because any application or script will have the same rights as the user. UAC will not be able to report activity malicious applications, which are allowed to change almost any Windows settings and modify a significant part system files, including registry entries.
Disable UAC through the system registry
In a registry whose records are accessed through special editor, most of the settings and information related to your computer and Windows 10 are stored. UAC settings that you can change through the Control Panel are also stored in the registry. Therefore, they can be changed by editing the corresponding keys.
- Execute "regedit".
- One by one, expand the sections HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System.
- Set the PromptOnSecureDesktop value to “0” after double-clicking on the name/icon of the key.
- Similarly, change ConsentPromptBehaviorAdmin to “0”.
Changes take effect immediately after clicking the “OK” button, without requiring the user to restart Windows shell 10 or the OS itself.
The PromptOnSecureDesktop key is responsible for dimming the desktop (1 - dim, 0 - not, other values are automatically equal to one) when UAC is enabled.
ConsentPromptBehaviorAdmin and PromptOnSecureDesktop values can be as follows:
- 1 and 2 correspond to the top position of the slider - always notify;
- 1 and 5 - second position - default value;
- 0 and 5 - notify without dimming the screen.
In order to answer the question of how to enable or disable User Account Control in Windows, you need to understand what it is. UAC is a security option operating system supported by everyone latest versions Windows (Vista, 7, 8, 10). Regardless of which account the user uses, the system prompts the application to allow it to make changes.
The procedure for enabling and disabling UAC in Windows 10 is different.
If the owner of the PC is an Administrator, then he can allow or not this program to enter the OS and change parameters only by clicking the “Yes” or “No” buttons. Otherwise, you will have to enter a password. The reasons for disabling Credential Control may vary, but sometimes it is truly necessary.
When you download an application, the OS 10 notification window that appears contains information about the name of the program, its publisher and the source of the file. All this gives a complete picture of the software being launched. Therefore, when an application does not have a name, users should question its “integrity”. Thus, viruses very often penetrate along with the installation file. If the program is scanned or you rely on an antivirus, in any case it is possible to disable the protection.
IMPORTANT. UAC in Windows system 10 is enabled by default. After disabling it, you can always enable control again.
Disabling the control function
Method 1.
To trigger the monitoring notification in Windows 10, you can try downloading installation file any simple program, for example, Media Player. To do this, users must have Administrator access to the entry. In the lower right corner of the message that appears, click on “Setting up the issuance of such notifications.” Edit the function as you wish.
Method 2.
Method 3.
In the Start menu, find the Control Panel tab. On the right side of the window, open the “small icons” and select the line “User Accounts”. Then click on “Change User Account Control Settings.” Also configure the operation of the option or disable it altogether.
Method 4.
Type Win+R on your keyboard. In the console that opens, enter “UserAccountControlSetting” and enter. In the parameters that appear, disable the option.
Method 5.
Click on the Win+R keys. In the Run window, enter the word “regedit” and “ok”. On the left side of the Registry Editor, find “Sistem”. In the right console that opens, click double click mouse click on “EnableLUA”. In the window that appears, change the value “1” to “0” and “ok”. To save the changes, a notification will pop up to restart the computer.
In order to enable control protection in Windows 10, in its settings you should return the selector to initial position. You can also configure the function to suit your parameters, where the best option the second selector position from the top can be considered.
What do the 4 UAC provisions mean?
- Always notify is the safest and best option. That is, any unauthorized action of the program will cause a notification window to appear.
- Notify when an application tries to make changes (default). Usually turned on when the program is loaded.
- Notify you when changes are made without dimming or locking the screen. This situation does not prevent Trojan invasion.
- Never notify, that is complete shutdown functions.
If you decide to disable the security option in Windows 10, you should be prepared for malware attacks. In this case, you need to be especially careful about the applications you launch, since they have the same access to information on the computer as users with Administrator rights. Therefore, if you disabled UAC just to stop it from interfering, then this is a very wrong tactic. In this case it is better to install protective function default.
Purpose of the User service Account Control(UAC) – control and prevention of unauthorized changes in the system. When you try to run some programs, the service provides a notification to the user about an attempt to perform an action that requires administrator rights. It may look like this.
That is, in order to produce certain changes, the system requests the user's consent. In Windows XP this function was missing, and any virus software could gain control over account administrator, making any entries into the system. Therefore, starting from Vista OS and higher, the developers decided to use this service. But due to being triggered too often, it received mostly negative feedback.
In Windows 7, its mechanism was significantly enhanced, a manual adjustment mode is provided. However, not all users are satisfied with constantly appearing warning messages, although in general they increase the level of general protection. Let's consider how disable this function.
Disabling UAC in Windows 7 and 8
Via control panel
The easiest way to disable it is in the search menu bar Start(Win+F) enter " Account Control» 
The link “ Change User Account Control settings" Click it and this window will open. 
The same window can be opened more the long way: Start / Control Panel, view in mode – Category.
Then system and safety, Support Center and already there we'll find the right one us point. 
In the window that opens, drag the slider to the very bottom - Don't notify me.
Confirm OK for the settings to take effect – reboot.
The command interpreter should be started from administrator (right key by button Start)
Enter one long command below for the changes to take effect.
Disable control in Windows 10
Via control panel
Buttons in the search bar Start(Win+F) enter UAC And Enter. A window will appear in which you can tune account management. Pull the slider down and click OK And restart computer. 
Hello! Today I decided to write another piece of advice in which I’ll tell you how How to disable User Account Control (UAC) in Windows 7. What's the first thing you do afterwards? Yes, I also install different programs :). And you probably also noticed a warning that looks like this:
What is it and what does it give? Is it User Account Control, or UAC. It serves to prevent changes to be made to the computer. third party programs, or more correctly said dangerous programs. By default, UAC is enabled, and every time you try to install a program, a window with a question will appear. Do you allow this program to make changes to your computer?
If you click yes, the installation of the program will begin, but if not, then nothing will happen and the program will not be installed. Personally, I think such a check is useless, and it only distracts all the time with its warnings. That's why I always disable UAC.How to disable UAC?
To disable this check, you need to log in to the system as an administrator. We go to “Start”, "Control Panel".
We look for the item and select it.
We choose.
A window will open in which you need to drag the pointer to the very bottom, to “Never notify”. After that, click “Ok”.
A message appears asking if you have permission to make changes to your computer. Click “Yes”. After this, the support center will inform you that to disable User Account Control, you need to restart your computer.
