Setting the sheet orientation to landscape is one of the most common tasks that users face when working with a text editor Word. In some cases, you need to change the orientation of the sheets for the entire document, and in some only for one or several pages. If you are also faced with a similar task, then this article will be useful to you. Here you can learn how to make a landscape sheet in Word 2003, 2007, 2010, 2013 and 2016. You will also talk about how to make a landscape sheet on only one page of the document.
If you want to make a landscape sheet in Word 2003, then for this you need to open the "File" menu and select the "Page Setup" item there.
This will open the Page Setup window. Here you need to select the orientation of the sheet "Landscape" and click on the "Ok" button.
This way you will be able to make album sheets throughout your Word 2003 document.
How to make a landscape sheet in Word 2007, 2010, 2013 and 2016
Word 2007, and more recent versions of this text editor, use what is known as the ribbon interface. This is an interface in which all the tools are divided into several tabs.
Therefore, if you are using a modern version of the text editor Word, namely Word 2007, 2010, 2013 and 2016, then in order to make a landscape sheet you need to perform slightly different operations. First you need to go to the Page Layout tab. All the main tools for managing the appearance of the page are displayed here. Among other things, there is a button "Orientation", by clicking on which you can choose one of two options: "Portrait" or "Landscape".
Choosing the "Landscape" option will convert all sheets of your Word 2007 (or 2010, 2013, 2016) document to landscape orientation.
How to make a landscape sheet in Word just one page
If you want, it will be a little more difficult than making the entire document landscape. After all, this requires dividing the document into sections. Below we will demonstrate how this is done using the example of the ribbon interface in Word 2007, 2010, 2013 and 2016. But, this instruction will be useful even if you have Word 2003, because it uses the same principle.
So, first you need to enable the display of non-printable characters. This makes it much easier to work with partitions.
The next step is to place the section breaks. In order to make a landscape sheet in the Word only on one page, you must insert the so-called "Section break" before this album page and after the album page. " To do this, place the cursor on the page that comes before the landscape page, go to the "Page Layout" tab, click on the "Breaks" button and select the "Next Page" item. Next, place the cursor at the end of the page you want to make landscape, and again in the same way set the section break after the next page.
After that, place the cursor on the page you want to make landscape and change its orientation to landscape.
If you did everything correctly, then you will receive a landscape sheet of only one page, and not for the entire Word document. After that, you can turn off the display of non-printable characters and continue to work with the document as usual.
Quite often, when working with text in Microsoft Word, it becomes necessary to rotate the sheet horizontally. And how do you turn a sheet in a Word? Let's figure it out.
In Microsoft Word, there are two types of arrangement of sheets - vertical and horizontal. The vertical arrangement of the sheet is called a book spread, horizontal - landscape.
The default page orientation in Word is portrait. However, when you are working with graphs for example or when you are creating something like a flyer, you may need to rotate the sheet 90 degrees, i.e. switch to the album sheet.
Fortunately, Word makes it easy to switch to landscape mode.
If you are using Word 2003, then select the menu item File -> Page settings.
Then in the dialog box Page settings select tab Fields.
Under the heading Orientation click Landscape... A blue outline should appear inside the edge of the window with the sheet in a horizontal position.
If you want all sheets in your document to have landscape orientation, then just click the OK button at the bottom of the dialog box. If you want to apply changes only from the current sheet and to all the following, then select the option to the end of the document Apply In chapter Sample, and then click OK.
You can also landscape any pages in the middle of a document. Just highlight the required pages before opening the " Page settings". And then, following the instructions described above, select the option to selected text in the dropdown under the name Apply.
Album sheet in Word 2007, 2010
In newer versions of Word (2007, 2010), changing the orientation of the sheet is even easier. Go to the tab Page layout main menu, in the group of commands Page settings choose Orientation -> Landscape... All pages of the document will change orientation.
If you need to rotate only one or several selected pages, click on the button in the lower right corner of the command group Page settings.
Hello everyone. Sometimes there is a need to create a document in Microsoft Word, where all pages would be vertical, and another page (or several) would be horizontal. For example, it might look like this:
Everything looks so that it seems simple. It seems that it is enough to select the desired page and change its position to landscape. But if you do this, you will see that not one page becomes horizontal, but everything.
Therefore, I will tell you how to change the orientation in a few simple steps of only one page (and you may have several), and leave others in an upright position.
Process
Getting started:
The last action will cause all subsequent pages to be horizontally expanded. But what can you do to ensure that only the pages you need remain flipped? To do this, you need to repeat the same steps, only in step 4 select Portrait orientation.
Advice: You can repeat these steps as many times as you like, combining horizontal and vertical sheets throughout your document.
Attention! Step 2 is very important. When you select the next page, you create a section break in the text, which allows you to change the position of the pages in that section only. If you add a new page by choosing Insert - Blank Page or Insert - Page Break, then Word will insert the page but not insert a section break, which will cause all pages to be flipped in step 4, not just one.
Video
Conclusion
That's all. Now you know how you can turn the page to any side and arrange vertical and horizontal pages in Word. If you have any questions, write in the comments.
When working with Word, it is often required to make the entire document or a separate page in it landscape oriented (while the rest should remain portrait). This article provides detailed information on how to make a landscape page in Word. Below are detailed instructions on how to do all this in Microsoft Word 2007. In other versions of Word, the sequence and principle of performing sequential steps remain approximately the same.
To begin with, consider the option of how to make all pages in Word landscape, that is, all pages of the document will have this orientation. Click on the desktop or in the "Start" menu on the Word icon to launch the program. The following panel will open in front of us (underlined with a red line in the picture):
After clicking, the following dialog box will appear:
In it, select the "Landscape" orientation and click the "OK" button:
Thus, all pages of the document become landscape format:
Now let's look at how to make one album page in Word. This can be done in two ways. Let's consider the first way. Let the first page in the document, which is filled with text, be in a book format. The second - let's make it landscape. Let's move the print carriage to the second page:
As a result of pressing, the following dialog box opens:
Click on the item "Landscape", select the item "Apply to the end of the document" and click "OK":
As a result, the second page becomes landscape orientation:
After filling the second page with text, the caret will jump to the third page, which will also be landscape, but we need it to be portrait. Let's do the same as we did with the second page, but choose the orientation "Portrait" to the end of the document:
Thus, the third page becomes a portrait format:
Now let's look at the second method using page break. Suppose your document has a first portrait page. To make the formatting symbols visible, click the Home tab and select the paragraph icon:
Create a second page in the document, separating it from the first with a page break. To do this, select the "Page Layout" tab and in the list of functions that appears, select and click "Breaks":
By clicking, this menu will appear, in which we need to select the "Next page" item:
After these manipulations, it should look like this:
Separate the third page from the second with the same page break:
Now let's make the second page landscape orientation. To do this, move the cursor to the second page of the document and left-click to make the print carriage active on it:
As a result, such a submenu will appear, in which we will select the bottom item:
As a result, the second page becomes landscape:
You can open an example of the resulting file by the link:.
If you do not understand something or there are any difficulties in how to make an album page in Word, then you can safely ask about everything in the comments.
The orientation of pages in a MS Word document can be portrait or landscape. Most often, when formatting text, they use portrait orientation for pages. But it also happens that a picture, graph or inscription in a large font does not fit on the page in width. In this case, you can make one or more album pages in Word. This is what I will tell you about in this article.
How to make landscape orientation of all pages in Word
This is the simplest question. Open the document you want, then go to the tab "Page layout"... In chapter "Page settings" click on the "Orientation" button and select the appropriate item from the menu. After that, all pages of the document will become landscape orientation.
How to make landscape orientation for several pages in Word
Now let's imagine that you have several pages in a Word document for which you need to make landscape orientation. All other pages must remain in portrait orientation.
To do this, select all the text on the required pages, go to the tab "Page layout" and in the section "Page settings" click on the small arrow in the lower right corner.
A dialog box will open. In it, in the "Orientation" section, set "Landscape". Then in the Apply field select "To selected text" and click OK.
Highlighted pages have become landscape orientation, and all others have remained portrait.
You can make several landscape pages in MS Word in another way. To do this, put italics at the beginning of the text, on the page from which the landscape will begin, go to the tab "Page layout", click on the "Breaks" button and select from the drop-down list "Next page".
Now put italics at the beginning of the page where the portrait sheets will start again, and repeat all the steps. When non-printable characters are enabled, the inscription will be displayed Section Break (from next page).
Put italics on one of the pages, which will be landscape, go to the tab "Page Layout" and in the section "Page settings" click on the arrow. In the next window, select landscape orientation, and in the "Apply" field, select "To the current section"... Click OK.
All pages that were in the current section have become landscape orientation.
How to make one album sheet in Word
If you need to make one landscape page in the Word, then you can use the methods described in the previous paragraph. Just apply them to one page.
Now you can easily create portrait or landscape pages in your document. Moreover, you can change the orientation both for several and for one page.
Rate article:
