On July 27, the Pangu Team presented the English version of the iOS 9.3.3 jailbreak, albeit with some nuances. The fact is that the validity period of the certificate used by the application was limited to only seven days, which means that the user would have to jailbreak every week.
Fortunately, the team has released an updated version of Pangu 1.1 using an embedded certificate valid through April 2017. How to jailbreak Pangu on an iPhone or iPad running iOS 9.3.3 will be discussed below.
2 ... Disable Lock Screen Passcode & Touch ID on iPhone or iPad,
and also, the function “ Find iPhone«;
3 ... Connect your iOS device (with or without jailbreak) to your computer using the Lightning cable.
4 ... If your device is already jailbroken, activate wiggle (uninstall apps) mode and uninstall old Pangu or PP apps from the home screen.
Note. After completing this procedure, the Cydia application and all tweaks will be saved on the device. If your gadget is NOT jailbroken, step 4 can be skipped.
5 ... Open the app .
6 ... Open the folder " Downloads"And drag the downloaded IPA file into the Cydia Impactor window.
7 ... At this point, you will need to enter your Apple ID. After entering the data, click on the OK button.
8 ... Enter your password and click on OK.
9 ... Cydia Impactor will start the download process.
Once completed, the Pangu app will appear on the home screen of the iOS device. Next, open “ Settings» -> « The main» -> « Device management».
10 ... In chapter Developer Software click on Apple ID.
11 ... Click on the " Trust"Located next to the Apple ID. In the window that appears, once again click on the button " Trust».
12 ... Go back to your home screen and launch the Pangu app.
13 ... You will be prompted to send notifications on the screen. Click on the button OK.
14 ... Check the box for the option “ Use an embedded certificate valid until April 2017"(Use embedded certificate effective until April 2017), and then click on Start.
15 ... When prompted (see screenshot below) click on the button Off to lock the device.
After a few seconds, the following notification will appear on the lock screen:
16 ... Wait for the device to reboot. After that, you will be able to access Cydia and all jailbreak tweaks.
17 ... In order to check the validity period of the certificate, go to the application " Settings» -> « The main» -> « Device management».
That's all. Now you can use the gadget without having to jailbreak every seven days.
After months of waiting, Pangu has finally released a new one. Next, we'll show you how to jailbreak iOS 9.2 - iOS 9.3.3 on your iPhone, iPad or iPod Touch using the Pangu tool.
Before starting the jailbreak process, please read the following notes:
- Pangu supports 64-bit devices such as:
- iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone SE
- iPad Air 2, iPad Air, iPad mini 4, iPad mini 3, iPad mini 2, iPad Pro
- iPod Touch 6G
- Pangu Jailbreak works on iOS 9.2, iOS 9.2.1, iOS 9.3, iOS 9.3.1, 9.3.2, and iOS 9.3.3.
- Pangu is a free jailbreak tool.
- The Pangu jailbreak is tethered and requires a new launch every time the device is rebooted.
- To use Pangu Jailbreak, you need a Windows PC.
- Make sure to take a full backup of your device using iTunes or iCloud so that you can restore your device in case something goes wrong.
How to Jailbreak iPhone, iPad and iPod Touch on iOS 9.2 - iOS 9.3.3 Using Pangu Jailbreak
Instructions on how to jailbreak iPhone, iPad and iPod Touch on iOS 9.2 - iOS 9.3.3 using Pangu Jailbreak.
Step 1: To jailbreak Pangu, you need to use 25PP.
Download 25PP:
Step 2: After you have downloaded 25PP, double click on the icon to open the installer and begin installation.
Step 3: Connect your iPhone, iPad or iPod Touch to your computer with a USB cable and launch 25PP.
Step 4: If your device is running iOS 9.2 - iOS 9.3.3, a big green button will appear in the Pangu Jailbreak window. Make sure your device is connected to the internet.
If you are prompted to enter a code (captcha) during installation, enter it to continue. You will also need to enter your Apple ID and password (this is required to create a developer profile on the device).
Step 5: After the installation is complete, you will see the PP app on the home screen of your device. Go to section Settings -> General -> Profiles and controls. arrange ... and open the Pangu developer profile or the one with the Apple ID entered in step 4. Click on the “Trust” button.
Step 6: Launch PP Jailbreak app and agree to receive notifications.
Step 7: Click on the round button in the center. Also, before installing, you can uncheck the box at the bottom so as not to install PP Assistant.
Step 8: Lock your device. The jailbreak process will start. You will receive push notifications on the lock screen. If the notification “Storage Almost Full” appears, just skip it.
Step 9: During jailbreak, do not disable the device lock. After the procedure is completed, the device will automatically reboot. If you see Cydia on your home screen, it means that the jailbreak process has been completed successfully.
When you start Cydia for the first time, it will take some time to “Prepare the file system”. After the preparation is complete, the application will close and reboot.
Every time you reboot your device, you will have to re-launch the PP app to re-jailbreak. Therefore, do not uninstall this application, otherwise you will not be able to jailbreak after reboot.
Error correction
If you get an error when entering your Apple ID and password, try disabling Find My iPhone and Apple ID 2-Step. Or create a new Apple ID account.
Do you get this error while jailbreaking iOS 9.2 - iOS 9.3.3?
Pangu claims that Apple has made a couple of fixes to their front-end. Now these fixes prevent users from successfully installing PP app.
However, the team has already found a workaround and is working on an update that will fix the installation error.
Write in the comments if you managed to jailbreak?
Don't forget to join our group
The other day on our resource was published a detailed how to jailbreak iOS 9.3.3 without a computer, using a mobile browser and without entering Apple ID details. After a while, the method stopped working, since. However, hackers were able to revise the instructions and make them relevant to the jailbreak community again. The updated "manual" is available for viewing below!
Attention!
- Before jailbreak, you need to back up the data on your device via iCloud or iTunes.
- It is preferable to jailbreak on iOS 9.3.3 as it fixes many bugs and improves security.
- Supported devices: iPhone 5s, iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPhone SE, iPod Touch 6G, iPad mini 2, iPad mini 3, iPad mini 4, iPad Air, iPad Air 2, iPad Pro.
How to jailbreak iOS 9.2 - iOS 9.3.3 from a browser without a computer?
Step 1: Open this article from Safari browser from your iOS device.
Step 2: Navigate from your mobile device to this link .
Step 3: Click on the Install button on the left of the page.
Step 5: The PP app will start downloading to your device. Open Control Center and watch the app download closely. Once the status changes from Loading to Installing, enable Airplane Mode for successful installation. Once the installation is complete, you can turn off Airplane Mode.
Step 6: After successfully downloading the application to the device, you need to go to Settings - General - Device Management. Please select Beijing Hong Yuan Online Technology and click trust twice.
Step 7: Now go back to the home screen and launch the PP app. We agree with the OK button to send notifications. Remove the bird opposite the PP at the bottom and click on the circle.
Step 8: After that, lock your device, wait 6 seconds, you will receive a notification about the successful completion of the jailbreak.
Step 9: Now unlock our device, launch the PP application again. You will see a circle with a loading animation. Once completed, the device will restart and Cydia will appear. Launch Cydia. Ready!
Please note that the jailbreak is semi-tethered, that is, after each device reboot, you will need to launch the PP application and click on the circle.
After half a year of promises, Chinese hackers still released a jailbreak for iOS 9.3.3. But it has some drawbacks. About them and that how to jailbreak iOS 9.3.3 I will describe in detail in this post.
The great thing about this jailbreak is that you need to activate it after every restart of your iPhone and iPad. But for this you absolutely do not need to connect the device to the computer every time. You just need to launch the application on the device and tap it a couple of times.
Another disadvantage of this jailbreak its compatibility only with devices running on 64-bit processors, namely:
- iPhone 5s, 6, 6 Plus, 6s, 6s Plus and iPhone SE.
- iPad Air, Air 2, mini 2/3/4 and iPad Pro.
- iPod touch 6.
For devices with a 32-bit processor, there is NO jailbreak and will not be(), here they are:
- iPhone 4s, iPhone 5, iPhone 5c,
- iPad 2, iPad mini first generation, and
- iPod touch 5G.
What about firmwares that can be cracked with this utility are:
- iOS 9.2 and 9.2.1
- iOS 9.3, 9.3.1, 9.3.2 and 9.3.3
How to jailbreak iOS 9.3.3 from Windows computer
As usual, before jailbreak, I kindly ask you to back up your data using iTunes.
Step 1: Download the program from the official website: pro.25pp.com
Step 2: Run the program as administrator.
Step 3: Click on the button indicated by the arrow in the screenshot below.
Step 4: Wait until the new program is installed, it is called PP Helper, after installation, an icon should appear on the desktop. Also run it as administrator.
Step 5: Be sure to turn off Find My iPhone and password / fingerprint protection on your device, then turn on Airplane Mode. The functions are in Settings -> iCloud -> Find iPhone and Settings → Touch ID & Password.
Step 6: Now you can connect your device to your computer and wait until the program recognizes it.
Step 7: Then such a page should open, press the green button on it. After that, the utility will start installing the jailbreak on iOS 9.3.3.
Step 8: After a while, a window will appear in which you need to enter your Apple ID and password from it and click on the green button.
Step 9: Now you need to wait until a new PP icon appears on your mobile device. After her appearance, go to Settings → General → Profiles... Choose a new profile and click " Trust»
Step 10: Now it's time to open the PP-chtotam app, which is located on the desktop of your mobile device.
Step 11: Click on the Chinese characters in the circle and lock your iPhone or iPad by pressing the Power button.
Step 12: Wait until a push notification appears on the lock screen. Then unlock your device and launch the PP app again.
Wait until your iPhone or iPad reboots, after which Cydia will appear on your desktop.
Possible errors after installing the jailbreak
Unfortunately, at the moment, most users are faced with certain errors after installing the jailbreak. There is a way to deal with some of them.
What to do if Cydia crashes after jailbreak iOS 9.3.3
For problems with Cydia, you need to:
Step 1. Launch the PP-chtot app on the device and allow it to send notifications.
Step 3. Click on the Chinese characters in the circle and lock your iPhone or iPad by pressing the "Power" button.
Step 4. Wait until a push notification appears on the lock screen. After which the device should automatically reboot.
After these steps Cydia will stop crashing on startup.
Some users interested in jailbreak ignored the release of the jailbreak utility for iPhone, iPad and iPod touch running iOS 9.2 - iOS 9.3.3 due to the fact that the hacker program from the Pangu Team requires you to enter the Apple ID login and password during installation. Fortunately, for such cautious owners of Apple technology, a method has been developed that allows you to jailbreak gadgets running iOS 9.3.3 without using a computer and without having to provide your Apple ID account details. We have written in detail how to use this method in this manual.
Updated by: Jailbreak of Apple mobile devices using this method has become temporarily impossible. Apple has blocked a certificate used to install a jailbreak app on iPhone, iPad and iPod touch. It is still possible to jailbreak iOS 9.3.3 in the usual way.
Step 1. Open this guide in the Safari browser on your iPhone, iPad or iPod touch.
Step 2. Follow this link and click “ Install».
Step 3. Wait for the download and installation of the PP application required for jailbreak.
Step 4. Go to the " Settings» → « The main» → « Device management».
Step 5. Select the developer profile that appears there and in the window that opens, click " Trust».
Step 6. Run the previously installed PP application and agree to accept notifications.
Step 7. Click on the circle located in the center of the screen and lock the device by pressing the Power button.
Step 8. Wait for the device to restart, then launch Cydia to check the jailbreak installation. Do not respond to incoming notifications during jailbreak installation.
Ready! You have installed a jailbreak on your iPhone, iPad or iPod touch without using your computer or entering your Apple ID account information. Now you can download any tweaks from Cydia - you can find out which ones are already optimized for iOS 9.3.3 by going to
