Instructions

To connect TV set but to the system block computer, you can use several different options. First, select a port in TV set e, to which you will connect your PC's video card. There are several main connectors that carry a digital or analog signal. The first type includes DVI ports and the second - S-video and VGA.

If you are the proud owner of a modern powerful computer, then you are in luck. Most likely, your graphics card is already equipped with an HDMI port. In this case, you just need to purchase an HDMI-HDMI cable and connect the computer to TV set ohm.

Relatively old models of video cards have two connectors: VGA and DVI. Especially for such cases, they came up with a DVI-HDMI adapter. Connect it to the video card, insert the HDMI to HDMI cable and connect it to TV set ohm.

Consider an important point: for many models of video adapters, the DVI port does not transmit sound, unlike the HDMI connector. In this situation, you need to purchase a cable with an audio jack (3.5mm) at both ends. Connect it to the Audio Out port on the sound card and the Audio In jack on the TV set e.

It's not enough just to connect TV set and the system unit. It is also necessary to adjust the image parameters. Turn on your computer. Right click on the desktop. Go to Screen Resolution. At the top, you will see the icons for the two displays. Choose the one that symbolizes TV set.

If you want to expand the work area, then select "Expand Screens". If you need to get an identical image on both screens, then select "Duplicate these screens".

Not all video card models support dual channel operation. You can find out about immediately after booting Windows: on the screen TV set but only the background picture of the desktop will be displayed. In such cases, click on the icon symbolizing TV set, and select Make this screen my main screen.

Related article

To set up a TV connection to a stationary computer, you need to take into account several nuances. This mainly concerns the choice of the type of connection of the two above devices.

You will need

• - VDI-HDMI cable.

Instructions

Examine the connectors located on your TV and system unit. Determine the appropriate types. Remember that not only identical channels can be connected. We recommend using digital data channels such as VDI and HDMI to get the best picture quality on your TV.

Select the connectors through which you will connect the TV to the system unit. Usually, the DVI port of the video card is connected to the HDMI connector of the TV. To do this, you need a DVI-HMDI adapter and HDMI-HDMI cable. Connect the TV to the PC video card with these devices.

Switch on both of the above equipment. Be sure to open the TV settings menu and select the desired port from which the signal will be received. Now proceed to configure the settings for your computer's video adapter.

If you are using a TV without a monitor, then you only need to adjust the screen resolution. In Windows Seven, right-click on the desktop and select Screen Resolution. Set the appropriate resolution and click the "Apply" button.

If you want to use the TV and monitor in sync, then complete the detailed settings. First, determine which of the devices will be the main one. Click on its graphic in the "Screen Resolution" menu and activate the "Make this display the primary" option.

Now select the options for the second display. Select the Duplicate Screen option to display the same image on your monitor and TV. Select the Expand Screen option to use these devices for different purposes. This will allow different programs and applications to run on both displays at the same time. This feature is most commonly used at home.

Related Videos

Tip 3: How to Connect an Analog TV to Your Computer

Watching movies on a small laptop or desktop computer display is not as enjoyable as on a large screen TV, even if it is not even liquid crystal or plasma. You can connect your computer to almost any analog TV.

You will need

• S-Video cable

Instructions

To connect, you should use the S-Video connector, which can be found on almost any stationary or, as well as on most analog models. By connecting and using an S-Video cable, you can duplicate the image, but the sound will come from your sound computer.

Following the instruction manual TV, search for a new channel. Among other signals received by the television, you will also find the video signal that is transmitted from the computer's video card. Commit the channel to memory TV and enjoy watching!

Related Videos

Sources:

• computer to analog TV

Tip 4: How to connect your TV to your computer's graphics card

Although a certain category of monitors can support high-definition video, many people prefer to watch their favorite movies on tv... In order not to buy expensive players or external hard drives, you can connect the system unit to the TV.

You will need

• DVI-HDMI cable.

Instructions

Start by choosing the connector B to which you will connect. It's no secret that there is an analog and digital video signal. For the transmission of the first type, VGA, S-video and SCART ports are intended, and for the second, DVI and HDMI. In video cards, you can find all these connectors, except for SCART. Let's discard it at once.

In a situation where the purpose of the connection is high-definition viewing, it is most reasonable to use. Those. it remains to choose between HDMI and DVI ports. The fact is that only new video adapters are equipped with an HDMI port. But there is a special cable-adapter for transferring digital signal DVI-HDMI.

Connect with video card computer using the above cable. Note that you can use an HDMI to HDMI cable and a DVI to HDMI adapter. Turn on your TV, open the settings menu and select the desired port as the main source.

If you plan to view video on a TV screen and at the same time work at a computer, then select the "Expand screen" item. Start the video player and move its window outside the monitor. It should be displayed on the TV screen.

Related Videos

Sources:

• how to connect TV to computer at the same time in 2018

Tip 5: How to set up a TV that is connected to a computer

Many users use modern LCD and plasma displays instead of monitors. This significantly improves the picture quality and enhances the enjoyment of watching a movie or gaming.

You will need

• - HDMI-HDMI cable.

Instructions

First, select the cable with which the TV will be connected to the computer system unit. For better picture quality, it is better to use digital channels such as DVI. Connecting via the HDMI port also allows you to transfer audio signals. This saves you the trouble of purchasing an additional cable. Connect to your computer's video card.

Turn on both devices. Open the TV settings menu. At this stage, you just need to specify the port through which you made the connection as the main signal source. Take this action.

Wait for the operating system to load and configure the settings for the video card. If you are using a TV instead of a monitor, then just set the appropriate resolution. Open Control Panel and select "Adjust Screen Resolution" from the "Display" menu. Select the desired resolution and click the "Apply" button.

When using the TV and monitor in sync, make additional settings. Open the "Connect to an external display" item in the "Screen" menu. Select the hardware on which all applications will initially run. Activate the "Make this screen home" function. Better to choose a monitor as your primary display.

Now turn on the Extend This Screen feature. Click on the graphic image of the TV and set the appropriate resolution. Computer setup at this stage is completed.

Open the TV menu and make detailed picture adjustments. Adjust brightness and contrast. Expand or constrict the image, if the capabilities of the TV allow you to do this. Align the refresh rates of the TV screen and monitor. This will reduce the load on the video card.

Sources:

• how to set up a TV through a computer

For those users who download films from the network and burn to discs, it is important that the film has a beautiful cover... On specialized sites there are tons of offers of ready-made covers for Blu-Ray, which you just need to download and print. Well, if you have not found a suitable cover on the Internet, you can make it yourself.

You will need

• - graphic editor Adobe Photoshop installed on the computer;
• - a special program installed on the computer.

Instructions

Start the graphics editor Adobe Photoshop. Then download the cover template - Blu ray Cover from the website. In the window that opens, under the "Add to Favorites" button, click "Download File". Extract the files from the .zip archive by right-clicking on the archive and clicking "Extract".

Psd file from the archive in Adobe Photoshop by pressing Ctrl + O. Take a look at the layers panel - "Layers" (if there is no panel, then press F7 in the top row of keyboard keys). Make the layers invisible "Bk" and "Example" - click on the "eyes" to the left of them. Open the Blu ray Cover folder by clicking on the arrow next to it. Make the "Box Art" folder invisible. Save your changes by pressing Ctrl + S on your keyboard.

Connecting a laptop to a TV via VGA consists of three main steps: determining the available ports, choosing a cable, and setting up the display. The order remains unchanged when connecting through different interfaces - HDMI, VGA, tulips, etc.

Determining the connector type

Before purchasing a cable for connection, you need to decide what connectors the equipment has. Laptops usually have VGA and HDMI ports, TVs - HDMI, SCART, DVI, VGA, tulips.

If a connector of the same type is found on both devices, then use it to connect. If the laptop and TV do not have the same ports, then you will have to use an adapter or active adapter to connect.

Cable selection

If the laptop and the TV have a VGA (analog) or HDMI (digital) port, then there will be no problems with choosing a cable: almost any lace will do, except for outright Chinese fakes. The task gets a little more complicated when the connectors don't match. Typical situation: laptop only has HDMI, and TV only has VGA. In this case, the cable is not enough, you need an active adapter that converts the digital signal to analog.

The picture quality will suffer a bit when using an HDMI to VGA adapter, but you can still connect your laptop to a TV. To transfer not only the picture, but also the sound, you need to purchase an HDMI to VGA adapter with tulips to connect to audio jacks or a 3.5 jack plug.

Adjusting the picture and sound

After connecting via an adapter or using only a cable, you need to set up the connection on the TV and on the laptop.

Some models do not have a source menu. Usually on such devices tulips (RCA) or SCART connector are used for connection. If you were able to establish a connection (for example, through a VGA to RCA or to SCART adapter), then try switching the source using the “TV / Video” or “AV / TV” button.

If the signal source is selected correctly, the laptop's desktop appears on the TV screen. For convenient operation, you need to make a small adjustment.

Since you now have two displays, you need to select the mode of their interaction. There are four options available:

• Duplication of the picture.
• Screen expansion - the desktop is divided into two parts, one of which is displayed on the TV screen, the second on the laptop display.
• Displaying the desktop only to 1 - the picture is only on the laptop.
• Displaying the desktop only at 2 - the picture is only on the TV.

The same modes are available on Windows 8 and Windows 10, so the setup is no different. Alternatively, you can use the laptop function keys to switch between screens. For example, on ASUS computers, the combination Fn + F8 works.

This completes the picture adjustment, but still has sound. Simultaneous transmission of audio and video is only possible via HDMI. If a VGA cable or adapter is used for the connection, tulips are needed to transmit sound. In any case, on a laptop, the setting will be the same:

1. Right-click on the speaker in the notification area and open the list of playback devices.
2. Right-click on the connector through which you connected the laptop to the TV. Select Use as default.

Now the sound will be directed to the port you specified and further to the TV audio system. If the required connector is not in the list of playback devices, then you need to right-click on the free space and select "Show Disabled Devices". If the connection is established correctly, the connector will surely appear, you will only have to choose its use by default.

I answer all questions in detail.
Friends! Everything you do on your computer, watch movies, cartoons, chat on Skype, play, view photos, slides or Internet pages in your browser, all this will be shown on your TV screen if the TV is connected to your computer via an HDMI cable. Now, almost any TV has an HDMI input, and most video cards produced have an HDMI output.
The HDMI interface was invented in order to connect two high-tech digital devices (they are undoubtedly your computer and TV) and transfer information from device to device without loss of quality. Such transmitted information can be an image and multi-channel high-quality sound. If you have a movie or cartoon on your computer, in any HD, Blu-ray or AVI, MOV, MPG, MP4 format, then you can watch all this on your TV. There are slides or photos, please see. I'm not talking about games, since I'm not a supporter of them, they take a lot of time from young people, which can be spent on studying. We connect the TV to the computer via HDMI with a second monitor To connect the computer to the TV, we will use an HDMI cable, it looks like this and can be up to 20 meters long, choose the cable of the length you need.

For example, let's take a Samsung TV, not entirely new 4 series (LED type), bought a few years ago, but it already has two connectors for connecting HDMI devices.

The computer that we will use to connect to the TV was also purchased about three years ago, it has an Nvidia video card and also has an HDMI connector.

As I said, there are two HDMI ports on our TV. With the TV turned off, connect the HDMI cable to the HDMI 2 connector,

We connect the opposite end of the cable to the HDMI connector of the video card of the stationary computer. The computer, in turn, is already connected to the monitor (also Samsung SyncMaster 971P) with a DVI cable.

We turn on the computer and TV. On the TV, there may not be an image right away, instead of it we see the following message "Cable is not connected" "Check the cable connections and the source parameter" or "Weak signal or no signal"

On Samsung TVs, to display a list of all available video sources, press the Source button on the remote.

A menu comes out on the TV, in this menu, using the remote control, select the HDMI 2 connector,

Now, on our TV, an exact copy of the desktop of our computer should appear. But again there is nothing, the same error appears on the black screen. So we go to the "Screen Resolution" settings. Right-click on the desktop and select "Screen Resolution".

As you can see in the window that appears, the main screen is set to the second (2) Samsung SyncMaster 971P monitor, and in the "Multiple screens" parameter we have set "Display the desktop on only 2 monitors", that's why the image is present only on the computer monitor screen, but it is not on the TV

We bring everything in this window to this state. Choosing a parameter
Multiple Screens: "Duplicate These Screens"
In the "Screen" parameter, "Multiple monitors" is automatically set, click Apply and OK.

The desktop of our computer appears on the TV.

The resolution of our small Samsung TV is 1366 x 768. If your computer monitor supports this resolution, then it will be set to the same resolution of 1366 x 768 automatically. If not, then either the TV or the monitor will have the wrong resolution. For example, my Samsung SyncMaster 971P monitor has a maximum resolution of 1280x1024. When using a TV and a computer monitor at the same time, the main thing for me is to correctly set the resolution on the TV, otherwise why did I connect it then. I expose the resolution of 1366 x 768 on the Samsung TV, the image is perfect.

And on a computer monitor, this resolution of 1366 x 768 looks like this.

And nothing can be done here. If you want the perfect image on a TV and a computer monitor, then they must support the same screen resolution, that is, have the same characteristics. There is no sound from the TV after connecting the TV to a computer via HDMI Friends! Do not forget that the HDMI interface transmits video and sound over one cable and we can specify in the operating system settings to use the built-in TV speakers for sound output.
Let's fix the problem by using a TV instead of a monitor. Go to Start-> Control Panel->

Hardware and Sound-> Sound

If you have nothing in this field, click on an empty space with the right mouse and in the menu that appears, check the items "Show disabled devices". "Show connected devices"
Now let's look at the name of our TV, in my case it's Samsung, you need to turn it on, and turn off the rest. Right-click on Realtek and select Disable.

We also turn off the speakers.

Samsung - Enable, Apply and OK.

In this one we will connect the TV to a stationary computer via HDMI and VGA.

Most modern video cards (including built-in ones) allow connecting 2 or more monitors. This will make it possible to work at a computer using a monitor, and watch movies on a large TV screen. Today, most TVs are equipped with FullHD (1920 × 1080) matrices. It is convenient to use them as a second monitor during work, and when the TV is not in use, then as the main source of information display. All the same, it is much more interesting to work and have fun behind large diagonals.

Article structure

Connecting a TV to a computer via HDMI

This requires the presence of HDMI connectors on the computer's video card.

In my home desktop PC, the graphics card is embedded in the processor.

It is also desirable to have an HDMI connector on the TV

or on the side

After we are convinced of the availability of connectors, it is necessary to purchase an HDMI cable.

This can be done at your nearest computer store.

Everything is ready to connect the TV to a computer via HDMI.

We recommend that you turn off your computer and TV before connecting. This recommendation makes sense, but at work a thousand times we connected “hot” monitors to computers via VGA, everything was fine. At home, I connected the monitor to the computer via DVI on the go and everything was fine too. Perhaps for HDMI it is better to turn off the devices.

We turn off the computer and TV.

We connect one end of the cable to the computer

second to TV

We turn on the TV.

Press on the remote INPUT several times and select the HDMI connector to which the cable was connected

We turn on the computer and proceed to setup.

Setting up an HDMI connection between a TV and a computer

On the desktop, right-click and select

In the window that opens in the section Screen you can select a monitor or TV from the drop-down list to adjust Resolution and Orientation

In the drop-down list of the section, you can select different display types

If we choose Duplicate, then on the TV it will be the same as on the computer monitor. Moreover, if the resolutions of the devices do not match, then it will turn out to be nonsense.

If we choose Expand, then the TV will be a continuation of the monitor screen. In this case, you can change monitors in places programmatically

There is a check mark at the bottom of the window Set as primary monitor... You can select your TV to check this box and click Apply. The TV will now display a taskbar with a Start button and open windows by default.

Sound setting

Since we connected via HDMI, we can immediately transmit sound. Let's set up the sound transmission to the TV.

In the window Sound we find the connected TV. Right-click on it and select Use as default

Now you can control the sound from the TV remote.

Connecting a TV to a computer via VGA

The procedure is the same. Make sure your TV and computer have VGA connectors.

In computer

on tv

We run to the computer store for a VGA cable if you have no more of the monitor

When connecting with a VGA cable, I do not turn off the computer and TV.

We insert one end into the computer

the other on the TV

On the TV with the button INPUT select a channel VGA and the image should appear.

Image adjustment is performed in the same way as in the case of connecting a computer to a TV via HDMI.

Connecting TV to PC via adapters

If your computer does not have an HDMI connector, but your TV does, then. Can be used adapter from DVI to HDMI

We fasten this to the DVI connector of a video card or motherboard (who has built-in video) and connect it with an HDMI - HDMI cable (the picture of which is given at the beginning of the article). In this case, there will be no sound on the TV, but the image should be of high quality as it is transmitted in digital format without distortion.

It happens that the TV does not have an HDMI connector (for example), but there is a VGA. On the contrary, a computer has everything except VGA. Take the ASUS R9270 graphics card, for example.

In this case, a DVI-VGA adapter will help out.

In this case, our image will be transmitted without sound and in analog format. In principle, it's okay, but at long distances, interference may occur and the image quality may deteriorate.

Conclusion

This article has covered connecting a TV to a computer via HDMI and VGA cable. Preferred via HDMI, as in this case the data is not converted to an analog format for transmission, and then back to digital for playback on a TV. Due to this, high quality is maintained. Plus, you can transfer sound via HDMI. In the case of a VGA connection, you will have to connect the sound via a separate cable.

Concerning the adapters. It seems to me that it is better not to use them if there are identical connectors in the TV and in the computer. Better to purchase the appropriate cable. In the case of using adapters, the quality decreases. For example, from HDMI to DVI, the ability to transmit sound to the TV via one cable is lost. In the case of DVI-VGA, the signal is converted to analog format, which reduces its quality. They say that "point to point" does not hit and the image may be slightly blurry.

In my case, for some unknown reason, the images via the HDMI cable were crooked (I'll try to show it in the video below), in contrast to the analog VGA connection. A BENQ E24-5500 TV monitor was used for the experiments. Maybe I did something wrong. Who knows and understands, please tell me in the comments.

Best regards, Anton Dyachenko

In this article, we will show you how to connect your computer to your TV. We will focus on the main points for connecting and configuring modern LCD and plasma panels. Depending on the video card, operating system and TV model, the procedure may differ slightly, but there are a number of common important points that this article is devoted to.

Why does a TV need a computer?

The answer to this question is very simple. It is enough to look at the TV screen and at a regular computer monitor. The TV, as a rule, has a large screen diagonal and is not located on the desktop in the corner of the room, but opposite a comfortable sofa, on which a large company can comfortably fit to watch movies or photos together.

And playing dance games becomes even more fun. You don't have to look at the details. You just glance over the huge picture on the TV and dance. And if the TV has a good loud sound, then this is generally ideal for dance games.

Most often, a computer is connected to a TV to watch movies downloaded from the network or DVDs, but without the help of a DVD player. In fact, you can display the same picture on a TV screen as on a regular monitor, it doesn't have to be movies. Don't forget about photography, games and the Internet. Most computer photo viewing programs have a slideshow function that shows all the photos in a specified folder in turn. It is good to play car and air simulators, strategies, “shooting-killing games” on the big screen, and, of course, no one can forbid you to surf the Internet without getting up from your couch.

In addition, large plasma screens connected to a PC are used as demonstration and exhibition equipment.

Let's start switching!

First of all, you need to connect your computer and TV using a special cable. The type of cable depends on which connectors of the TV and video card of the computer will be used for commutation. What to connect, we already know why to connect - we have decided, it remains to answer the most pressing question "how to connect?".

First of all, we will establish what connectors the computer and TV are equipped with. The video card is responsible for the output of the video signal from the computer. Its connectors are very easy to find: one of them is connected to the wire of your monitor. You should look for TV connectors on the back panel, side or even the front. In case of difficulties, you can look for them in the instructions for the TV.

What are the video card connectors

D-Sub (VGA) is a connector to which an ordinary monitor is connected; this connector is found on most video cards, excluding the latest models that use more modern interfaces. D-Sub is also called "VGA interface". An analog signal is transmitted via the VGA interface.

DVI

DVI-I is an advanced interface that serves both analog and more modern digital monitors. As a rule, on a DVI-I video card, the connector is adjacent to the traditional VGA-interface, or the video card is equipped with two DVI-I connectors, and the bundle includes an adapter from DVI-I to the good old D-Sub.

S-Video

S-Video is another popular video transmission interface. This connector is widespread among "non-computer" video equipment and provides a sufficiently high-quality video signal transmission.

HDMI

HDMI is a relatively new development, a digital interface used in high definition television systems. Provides the highest quality image and simultaneous transmission of video and audio signals. If you want to get a truly high-quality image, then the presence of an HDMI connector on the video card and TV is a must.

What are the TV connectors and what cables are needed:

Cable converting D-SUB (VGA) to RCA and S-Video

Composite RCA is an obsolete video interface, but still found due to its widespread popularity. To connect via RCA, you need an S-Video or D-Sub (VGA) to RCA cable. The interface consists of three connectors: video, left audio and right audio. We'll talk about sound a little later.

S-Video - when using this connector on both a TV and a video card, there is no need to use special adapters. It is also possible to use a D-Sub (VGA) S-Video adapter.

SCART cable to S-Video

SCART is a fairly popular interface that provides simultaneous transmission of video and audio signals. It is usually used to connect a video player, but can also be used for a computer. In this case, either a VGA-SCART cable or an S-Video-SCART cable is required. You can get by with similar adapters, which, by the way, in addition to the video input, can also have an audio input for connecting sound.

DVI to HDMI cable

In addition, the TV can have a standard D-Sub (VGA) connector for monitors and a DVI-I interface. This option simplifies the connection task as much as possible, because it does not require additional adapters.

1. It is desirable that the video card (computer) and TV connectors match. DVI-IDVI-I, S-VideoS-Video, etc. This will avoid the problem of finding exotic cables and all kinds of adapters. In addition, transformation from one interface to another can reduce the quality of the picture.
2. Interface cables can come with a video card or TV, in which case you can safely use them.
3. If direct connection is not possible, use adapters. The following connection types are considered acceptable: D-Sub (VGA) - DVI-I, D-Sub (VGA) - SCART, S-Videо - SCART, DVI-I - SCART.
4. Don't skimp on patch cords. Cheap cables have low noise immunity, which reduces image quality.
5. If you are in doubt about which type of connection is best to use and which cords you need, consult a store. Experienced salespeople will help and advise.

Audio signal

Having decided on the video, let's move on to the sound. Computer sound cards usually use a 3.5 mm TRS connector (miniJack) (as in most portable players, from the good old cassette decks). On the TV, the audio input can be made in the form of miniJack, TRS 1/4 "(Jack) or audio RCA (" tulips "), that is, you may need the appropriate cables or adapters. Finding them is not a big problem, the main thing is to determine exactly which ones. the connectors are used on your TV.

3.5 mm TRS jack (miniJack)

Typical MiniJack to RCA cable

When connecting a TV via a SCART interface, special adapters are used from audio + video signal to SCART. For example, it is possible that the video signal is transmitted from the S-Video connector to the SCART connector through an adapter, and a miniJack cable is connected to the same adapter to the RCA connectors.

If you have a separate audio system connected to your TV, then it is advisable to transfer the sound directly to it. The recommendations are the same: decide on the connectors and select the necessary cords.

All connection operations must be performed when off equipment. When the correct cables are inserted into the correct connectors, you can turn on your computer and TV and proceed to software setup.

Connecting a TV in Windows XP

After waiting for the operating system to load, right-click on the free space on the desktop and select "Properties". In the window that opens, click on the "Parameters" tab. Now you need to select the second monitor, that is, the one marked with the number 2, and check the box "extend the desktop to this monitor". ATTENTION! To play STEPMANIA, it is better not to check this box, then you will definitely not have any failures.

You can see the result on the TV screen by selecting the “Video” channel. There may be several of them, but one of them is exactly the one to which information is transmitted from the computer.

To watch movies or photos on the TV screen, just drag the video player or image viewer window with the mouse to the second desktop, that is, onto the TV screen. Then you can expand the movie or photos to full screen and enjoy watching.

In the settings of the worker, you can now set the main monitor. If a TV is selected as the main monitor, it will display the Start menu, desktop shortcuts, and so on. This option is convenient when the TV is used as a monitor constantly or often enough.

Connecting a TV in Windows Vista

When the operating system boots, you will be informed that a new display has been found. At the same time, three modes of use are offered to choose from:

1. Display the same information on the TV screen as on a regular monitor. This is the mode we recommend for dance games.
2. Extend the desktop to the TV screen (see "Connecting a TV in Windows XP")
3. Display the picture only on the TV screen.

Just specify the option you need and click "OK". Then the TV settings can be changed in the display properties (right-clicking on an empty space on the desktop, item "Personalize", sub-item "Display Settings").

Additional settings

In the display parameters, where two monitors are displayed and the mode of use is selected, there is an "additional" button, which allows you to fine-tune the monitor. However, the menu that opens may differ for video cards from different manufacturers, so we cannot give precise recommendations. For more detailed information on "fine-tuning" the TV, you can refer to the instructions for using the video card.

In addition, there are special programs for video cards from different manufacturers that allow you to quickly and conveniently configure a video card to work with a TV. These programs allow you to select the signal type, resolution, picture size, adjust the brightness and, rather, are intended for "advanced users". We will not consider in detail the capabilities of these programs, because even using standard Windows methods, we can achieve what we need.

If you work with a laptop, they usually have keys for quickly selecting the monitor configuration.

Of course, when connecting a TV to a computer, there are some subtleties. However, with due care and attention, this procedure is not as complicated as it seems at first glance.