Many Yota Internet users are interested in the issue of signal amplification. We will tell you how to make a signal amplifier with your own hands.
Navigation
If you are interested in the question of how to make the Yota signal amplified yourself, then you have come to the right place. Today, wireless technologies are not yet sophisticated enough to provide high-speed Internet access with a good signal. Therefore, people often think about buying a device to improve the quality of the connection.
But, skillful people have already come up with methods that allow you not to spend a lot of money.
A homemade Yota signal amplifier can be assembled from the simplest materials. So, you will save several thousand rubles.
The internet can get slow anywhere, even where you least expect it. Imperfect technologies lead to the fact that the problem manifests itself even in large cities. It is solved thanks to the antenna and the signal amplifier.
How to assemble a signal amplifier by yourself?
If you want to make an amplifier yourself, then first find the materials you need. We will consider the most popular types of homemade antennas that amplify the signal:
- Canning
- Pseudo-satellite
- Omnidirectional
How to make a canned amp?
You will need:
- This design is based on a simple tin can. Fruit or paint containers are often used.
- Copper wire 2mm thick
- A pair of screws
- N-socket
It is worth saying that after preparing all the materials, you need to make some calculations.
- First of all, clean the jar from any dirt. It should be at least 7.5 mm in diameter and not more than 10 cm in diameter, and at least 13.5 cm in height.There is no need to cut the top of the can, because you still need it
- Cut a piece of wire 3.1 cm long
- Solder it to the center pins of the N-socket. The wire must be straight
- Now make a hole in the jar and attach the socket with the wire to it, as it will act as a conductor of the waves.
- To prevent external factors from affecting the wire, cover it from above with a plastic cover that can conduct waves
The entire operation will take you no more than two hours.
Pseudo-satellite amplifier
Pseudosetellite is mainly used in private houses. It's easy to do it yourself. You will need:
- Colander, saucepan, bowl, or any similar stainless steel
- A piece of cardboard with foil glued on it
- Metal grill, umbrella and so on
- Five meter USB extension cable
- Two screws
The construction is assembled like this:
- Drill two holes in a saucepan or other material of your choice
- Place cardboard with foil, and fasten the USB cable in the center of the product
- Fix the antenna in the desired location
Omnidirectional antenna
This design is great for city apartments, hence the low cost. But to assemble it, you need some knowledge, without which nothing can be done. The parts you need include:
- 50 ohm BNC cable
- Soldering iron
- Hot glue gun
- Ruler
To create an amplifier:
- Strip the cable 4 cm
- Dissolve it, and divide the screen into 4 equal parts
- Unscrew the 4 screen taps and bend them at a 45 degree angle
- At the base, secure the bundles with glue so that they are fixed inside the structure
- Shorten the bare cable to three centimeters.
- The same length must be made for the bends.
The whole assembly takes about half an hour.
How to connect the structure?
Amplifiers are not at all difficult to assemble, but when they are connected and configured, difficulties begin. The main thing is that the entire station is directed correctly. The Yota amplifier will do its job well only with a good signal level.
You can spend several hours on this, but you will get the fastest Internet connection.
Video: Simple Signal Booster for YOTA 4G LTE Modem
All mobile operators have problems with signaling. The coverage area is not always a factor in ensuring signal stability, but it remains the most important condition for receiving cellular communication devices and transmitting packet data. The Yota operator, whose signal level is constantly monitored by automation, is making efforts to expand its coverage area. Yota signal quality can be checked at any convenient time.
Mobile signal quality is random from one area to another
Indeed, since the operators are primarily interested in the most populated areas, some geographic areas are very poorly or not at all covered. It is enough to walk in the mountainous regions or in the center of France to realize this. Network coverage gets very random when it's not just missing.
Problems with mobile reception can also be caused by elements that interfere with the reception of the mobile signal. Thus, even when a person is in an area adequately covered by the network or networks of different operators, it is sometimes enough to enter the building to lose the mobile signal.
How to check the Yota signal?
You can check the signal from any type of Yota devices by typing the address 10.0.0.1 in the search. The view of the table with device parameters will depend on the installed operating system and the version of the application. In the performance grid, two metrics report the signal strength of the operator:
- RSRP - will show the owner of the device with Yota the signal quality of the base station;
- SINR - informs about the ratio of interference (noise) in relation to the signal.
When the opposite of SINR is 0 dB, then the signal / noise indicators are equal to each other. An increase in the positive values of the indicators indicates a better signal quality.
These reasons alone explain most of the difficulties in receiving a mobile signal. However, there are small tricks that can help you improve your mobile signal reception. However, this procedure can help you improve your reception by changing the network type.
Moreover, the frequency bands that are typically used by these networks are more difficult to disturb by external elements. One of them is undoubtedly the most reliable solution for increasing the mobile signal in a given area. A mobile signal amplifier or mobile signal repeater is actually a device that captures a low-intensity moving signal, amplifies it and then redistributes it over a given area.
How to improve the Yota signal?
To access high-speed Internet, you must ensure a high-quality signal level. Zones where the Yota signal disappears can be found in micro-districts of megalopolises and outside the city limits (the latter option is more common). If a weak Yota signal was detected, the most effective way to fix the problem is to install an external antenna.
A mobile signal amplifier is actually an amplifier unit accompanied by an external antenna and one or more internal antennas. The amplifier is placed inside a building, and an external antenna is usually placed on the roof of a building or near a high point to pick up the best possible mobile signal. External antennas must be distributed in different parts, which must be covered by a mobile signal.
The advantage is that it offers high signal quality and stability, it is compatible with most mobile operators, and the system is completely transparent to users. On the other hand, the system is not mobile and can only function if it is possible to pick up a mobile signal by placing oneself at a high point in order to position an external antenna.
The reasons for installing additional equipment may be:
- The base station is located nearby, but a weak signal comes from Yota;
- The equipment detects the presence of a weak signal, but the connection goes through;
- Internet speed indicators do not suit the user.
How to increase the signal of the Yota modem?
A simple and legal method is to purchase a USB extension cable and place the modem near a window. It is unlikely that it will be possible to radically change the signal quality. Indicators will increase, but not significantly. There is another way to improve the Yota modem signal. Upgrade the input connector on your own and install the "pigtail" and connect external devices. The signal parameters will increase, but the warranty for the modem will no longer be valid.
These applications actually use many different databases and all the information provided by mobile operators. These apps won't really improve your mobile signal reception, but they will allow you to find areas that are best covered by French mobile operators' networks. So, if you have an urgent call, you can easily find a no-go area.
These shells usually include an antenna that can amplify the receiving power of your cell phone. These shells can offer you better reception in areas where the mobile signal is weak. These casings also promise to improve the longevity of your battery.
Today, special antennas are offered for sale that allow using the modem circuit as an irradiator. Answers to the question to the Yota operator how to improve the signal have a sufficient number of convenient solutions, taking into account the needs of subscribers and external conditions that affect the equipment.
How to buy an Iphone 7 10 times cheaper?
A month ago I ordered a copy of the iPhone 7, after 6 days I took it by mail) And so I decided to leave a review!
As a rule, if your house is located in the "available reception" zone (marked in blue on Yota coverage maps), then this means that outside the premises you can have a stable connection, and when you try to connect in the house or during precipitation you cannot either do not detect the signal or find it very weak and unstable. This leads to the fact that in order to connect to the Internet, you are forced to look for a place where to place your laptop with a Yota LTE USB modem in which the connection will not break and there will be good speed. Usually such places are by the window or completely unpredictable in the far corner of a room. So you are forced to move your comfortable workplace to a completely unsuitable place due to the fact that there "catches the Internet". If all of the above happens in your house, then you definitely need to amplify the Iota signal for confident reception throughout the entire area of the house and the adjacent area.
How the radio signal is amplified
To transmit information, Yota, as well as cellular operators of the GSM and 3G standards, uses a radio signal that propagates from the base station (BS) to the subscriber and from the subscriber to the BS. Therefore, to amplify the Yota radio signal, you can apply the same principles that are used for GSM and 3G radio signals. To enhance cellular communication in places of poor reception, repeaters with external and internal antennas are used. The principle of operation of such devices is that an antenna is installed outside the house on the facade or above the roof of the house, which receives the signal from the BS and transmits it via the drop cable to the repeater, which in turn amplifies the received signal and transmits it to the internal antennas installed inside the house. ... The cell phone perceives these antennas as being close to the base station. The signal received by the internal antennas from the telephone is transmitted to the repeater, where, if necessary, it is amplified and transmitted by the external antenna to the BS.
As a rule, an antenna with a narrow radiation pattern is used as an external antenna, that is, a directional antenna that allows you to obtain a significant gain in gain compared to an omnidirectional antenna. Also, the fact that this is a stationary antenna, which can be raised to a height sufficient for reliable reception, is of no small importance and allows you to achieve reception where it is not available on the official coverage maps of cellular operators.
Features of Yota signal amplification
The disadvantage of the standard amplification scheme used in GSM and 3G is that subscriber devices for Internet access (PCs, laptops, tablets, smartphones, etc.) must have built-in support for the LTE standard. At the moment, only a small percentage of the entire fleet of such devices support LTE, but almost all of them support work with WiFi. Therefore, the solution that we use to amplify the Yota signal uses the WiFi network to communicate with subscriber devices. Thus, the LTE channel is used as the "last mile" for communication with the provider, and the well-proven WiFi standard is used for home coverage.
The advantages of our equipment
The sensitive directional MIMO antenna is structurally made in the same case with the modem, which made it possible to reduce the cost of the design, since expensive high-frequency cables and connectors are not used - a regular computer cable (twisted pair or USB, depending on the selected set of equipment) goes from the antenna to the house. The data on such a cable is digital, and thus Yota receiving equipment can be easily integrated into the existing computer network of the facility: connected to a router, server, network switch, access point, or to one single PC.
The antenna body has a compact, simple shape, streamlined for the wind and does not create a lot of windage. Such an antenna can easily be placed in any accessible place and will not attract too much attention.
How to order the Yota signal amplification service?
The process of selecting a signal amplification solution begins with placing an application on our website. To do this, you just need to specify the exact address of the house or its GPS coordinates. Based on this information, we will check whether your house falls within the theoretical coverage area of Yota and will contact you to clarify the installation time of the equipment and agree on the cost of the work.
Externalyota antenna - a simple solution to a big problem
The Yota amplifier, as you might guess from the name, is nothing more than an external (installed outside the case) transceiver module, made in the form of an outdoor or indoor antenna, compatible with modems and routers produced under the Yota brand. It takes over the functions of their regular low-power antennas, increasing the integrity and data rate.
Wireless Internet from Yota is such a thing ... often it does not reach the speeds promised by the operator. It is not surprising that Yota amplifiers are in such great demand among the population, which not only remains unchanged over the years - it is steadily increasing. Indeed, for many, Yota signal amplification has become a real "headache" - a problem that seems insoluble.
However, exactly until they visit the e-shop site, where you can always buy an antenna for Yota, and not just buy it, but do it at the best price in the city! The solution to the long-term problem with the Internet, as practice shows, will certainly not take you not only a lot of time, but also money. This problem turned out to be not so serious, if you look ...
How not to be mistaken with the choice of antennaYota
However, you should not assume that absolutely any Yota antenna you purchased from the metro can solve it. Such purchases are rarely successful, and therefore you shouldn't pin high hopes on them.
What do we mean by good? This is such a signal amplifier for Yota, which will be equally effective both within the city, where neighboring buildings block the radiation of base stations, and outside, where the base stations are far away. Problems with wireless Internet use are popping up everywhere, but you no longer need to worry about them - they no longer concern you!
By giving preference to the online store site, you are guaranteed to receive an effective Yota signal amplifier, since there are simply no others in our range. All that is left for you to do is to decide on the technical characteristics, which directly depend on the technical characteristics of the Yota device you are using (modem or router).
Objective signs of a good antenna for Uota
Not the least important are the materials from which our amplifiers for Yota are made. An external antenna, even if it is used indoors, and if in an open space, in particular, should be made of high-quality weather-resistant, but not interfering materials. Otherwise, the yota amplifier will not only fail to provide adequate efficiency, but it will not work for a long time either.
Distinctive features of antennas forYotaLTE
External antennas designed to amplify the Yota LTE (Yota 4G) signal have become widely demanded relatively recently. The fourth-generation wireless networks that came to large cities in Russia did not do this to the full, which is why many subscribers were not able to enjoy the traffic and connection stability promised to them.
By its design and principle of operation, the antenna for Yota LTE does not differ at all from the antennas intended for use in networks of previous generations. The difference lies in the data transmission standards it supports, which are more demanding on both the receiving and the radiation capabilities of the antenna, as well as in the technologies and devices developed for them.
However, to the same extent as the external Yota antenna, this applies to cable products and connectors used to connect it to modems and routers of the same name. An LTE amplifier for Yota, if it was connected using low-quality cables and connectors, can lose up to 15% of received and transmitted signals, thereby negating all the advantages of its use ...
On the dangers of low prices for antennasYota 4G
But let's return directly to the Yota LTE signal amplifier. All of them are developed taking into account the most modern achievements in the field of wireless communication and therefore do not cause any complaints. They are developed by many companies from the USA, China and some other countries, because according to international experts, LTE is the future, and its commercial use is a great benefit!
The situation is spoiled by small manufacturers who, wishing to reduce the cost of their products as much as possible (including Yota LTE antennas), use completely unsuitable materials that can turn any, even the most ingenious project into an “unviable monster”. There are thousands of examples of this. The lion's share of them are antennas made in China, designed for use in conjunction with USB modems.
External antennas for Yota (to amplify the signal of the said operator) are very widely represented on the territory of Russia. It is not a problem to buy a Yota 4G amplifier today, it is different - in his choice! The latter is hampered by the innumerable variety of trade marks, among which there are very few trustworthy ones. Often the buyer has to choose between bad and ... bad, which in our opinion is unacceptable.
Amplifier for modemYota at a bargain price
Fortunately, you are on the site of an electronic store, a site whose customers, who decide to purchase one or another device for Yota (signal amplifier, for example), do not face similar problems. The external Yota LTE antenna purchased here will certainly not let you down, providing perfect reception and transmission of data, regardless of the distance from the base station.
However, this is not the only strong point of our antennas for amplifying the 4G Yota signal - their favorable cost also worries many, attracting more and more new buyers to the site. It is profitable, but not underestimated; this, let me tell you, is not the same thing! We do not deal with cheap antennas made by someone who knows who, and we do not recommend it to you!
The same antennas for amplifying Yota LTE, which you can see in the catalog of this site, are sold at the best prices in Moscow, which we rightly call profitable! These antennas were not here by chance - they are made of high-quality metal alloys and modern polymers, with the strictest observance of the requirements of the LTE standard and related global standards.
Strengthening the modem signalYota by technologyMIMO
Antennas that support the Multiple Input Multiple Output (MIMO) technology, which have recently appeared in the line of external devices for Yota, deserve a separate word. MIMO antennas are distinguished by a more complete use of the bandwidth provided by the LTE standard, which became possible due to the division of the transceiver into two parts - receiving and transmitting.
The MIMO-compliant Internet signal booster for Yota, therefore, is not one, but two antennas that must be installed so that they do not interfere with each other, creating frequency correlations. Such antennas for the Yota LTE modem provide at least twice the data transfer rate, and this is without any changes at the standard level.
Today, the MIMO signal amplifier for the Yota modem is the best solution to problems when using radio frequency communication channels of the LTE standard. Its disadvantage, and even then a small one, is considered only the need to install two antennas instead of one, but it is also successfully eliminated thanks to the use of frequency selectivity technology (by connecting these antennas in one housing).
Your choice - antenna and modem (router) in one set
An antenna for a 4G Yota modem, as well as an antenna for another popular yota-device - a router, you can purchase from us not only separately from the modem (router) itself, but also together with it. After all, the electronic store site sells not only a variety of antennas, but also other devices designed to work in the Yota operator's wireless network, as well as accessories for them.
Buying a yota modem with an antenna is, without a doubt, the right decision. One way or another, you will have to purchase an antenna - not now, then later, having spent a certain amount of time selecting it for the characteristics of the modem, which is not at all as simple as it might seem at first. It is better to do this in advance by purchasing a Yota modem with an antenna included! By the way, this is not only more convenient, but also cheaper.
Pay attention - antennas with a built-in Yota modem are also sold here. Such antennas are mainly indoor (intended for use in rooms with normal humidity and temperature); they are optimal for use with laptops and tablet computers, at home, at work, outside the city, on the road - there are no restrictions!
Sale of antennas for modemYota and not only
We are engaged not only in the sale, but also in the installation of Yota antennas. This service is one of our most demanded: it was used by more than 80% of those who bought these antennas from us at one time. Considering how well the specialists of the online store site understand Yota devices, installing antennas does not seem such a difficult task for them.
Here it is necessary to clarify that they are far from always compatible with each other - the Yota modem and an external antenna. Many modems of this brand, as well as many of its routers, do not have connectors for connecting such antennas at all, which pushes their owners to experiment with a soldering iron. How can all this turn out? Apart from losing the warranty on the device, nothing ...
You can not only purchase modems and routers from us, but also modify them by adding the ability to connect external Yota antennas. Buying a signal amplifier and not being able to connect it to a modem is, of course, unpleasant, but not enough to ruin your mood. Just contact us and we will fix this annoying mistake made by the modem manufacturers.
05.05.2015
Many who have used or are using Yota unlimited internet are faced with the problem of a weak signal, which leads to a low download speed. This, of course, is upsetting and upsetting. It even happens that it seemed to be normal before, but now the signal is bad. What if the Iota signal is weak and how to strengthen it?
Let's consider the causes of the problem and how to solve it.
What if Iota's signal is weak?
- Try to move the modem closer to the window, preferably towards the Yota base station. This may require a USB extension cable. It is not recommended to use a USB extension cable longer than 5 meters, in addition, cheap USB cables may not work at all with the modem.
- Try to move the modem to another room, to another floor. Thick walls, especially brick and reinforced concrete, impede signal propagation.
- Use a special ... In this case, the panel antenna will help to catch and amplify the scattered signal, and the parabolic antenna will tune to the base station at a great distance. It is recommended to use antennas with MIMO technology, because this allows you to catch the signal simultaneously in the horizontal and vertical planes.
Note that the antenna is a passive element, and there is no 4G LTE amplifier in it. Strengthening the Yota signal is achieved only by changing the antenna pattern and more accurate focusing of the signal. A quantitative measure of antenna efficiency is the gain (GF). The more KU the antenna has, the narrower its radiation pattern and the more difficult it will be to point such an antenna exactly at the base station. Moreover, it is necessary to tune the antenna in two planes: in the horizontal and in the vertical.
For an accurate assessment of the signal, as well as the selection of the necessary equipment for amplification of Yota signal it is worth contacting specialists. We offer the service " ".
